This is a protective case that i designed to protect my Wifi Pineapple Mk V antennas during backpack transport. I designed it in two parts, top and bottom, which are sandwiched together around the Pineapple Mk V. The antennas are then fully protected so even impact on the side with weight wont break them. I have also provided access to the Ethernet, USB, Power, Serial ports as well as a cutout at the bottom to let the heat escape and another cutout at the top to see the leds. There are 4 pins matching four holes to clip the top and bottom parts together. The size of these pins and holes can be adjusted on your computer with the original 123D Design file which i provided. This is important because the tolerances of my 3D printer (Anet A8) isn't necessarily the same as your 3D printer.
If anyone prints this for their own Pineapple Mk V, please share the results. I would be very happy to see my design being used by someone else.