Plunger with cup opener ( UPDATE 1 ) for soldering paste syringe for KOKI 40g/10ml and some other paste or flux syringes (3361135)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml).
It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc.
Working length is 80mm (diameter 15.60mm).
The diameter is up scaled about 2% so after printing when the plunger is cooled down, the plunger diameter should be about that mentioned 15.6 for gentle snug fit.
If used material will have different shrinking properties then the up scaling should be properly changed.
UPDATE 1
At the bottom of the plunger I've added a syringe cap opener
It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc.
Working length is 80mm (diameter 15.60mm).
The diameter is up scaled about 2% so after printing when the plunger is cooled down, the plunger diameter should be about that mentioned 15.6 for gentle snug fit.
If used material will have different shrinking properties then the up scaling should be properly changed.
UPDATE 1
At the bottom of the plunger I've added a syringe cap opener
Reviews
There are no reviews yet. Be the first one to
write a review.
