I got the idea from NieLX for the mount and Isograph for the fan mount. Big thanks guys.
The main goal was to make it so I could assemble the hot end and then mount it to the printer. These things are kind of tricky if you haven’t ever done it. And bench assembling it is WAY easier.
I also wanted to turn the extruder 90 degrees, so I could see it better. There’s spinny wheel things in it and I’m easily amused…..
I also wanted to get the fan to not be mounted on the gear box and be a little more easily printable.
I drew up mounts for different auto level sensors. One for the little square SN04-N prox (yes, the one no one likes but people still use.) A mount for a BLTouch. And a mount for the round tube type prox switches. The mounting hole in the bracket is 16mm.
The stock screws were to short and I didn't have the right size. So I used 3mm screws to mount all the brackets. They fit through the stock mounting holes and you can put a nut on the back.
The offset for the sensors:
BLTouch Y 0 X -34 Round Y 0 X -43 SN04-N Y 0 X -39
I included my Sketchup 2016 file. If you want to customize it more, by all means feel free.
Special Thanks, Mount: NieLX https://www.thingiverse.com/thing:1808378 Fan Mount: Isograph https://www.thingiverse.com/thing:1571526
"THE BEER-WARE LICENSE" (Revision 42): https://www.thingiverse.com/kwg08/ wrote this file. As long as you retain this notice you can do whatever you want with this stuff (for non profit uses only.) If we meet some day, and you think this stuff is worth it, you can buy me a beer in return.