Mount for MIRRORED Titan Aero Extruder and Linear rails on an ADIMLab Gantry. Also includes cooling duct for 5015 blower and BLTouch Mount
You will need a new x- axis belt that is little longer in order to attach. Also need (4) M3x6mm screws to attach to Linear Rail MGN12 carriage. And (4) M3X20mm screws and bolts for the part cooling duct.
BLTouch Offset is 57.5mm x axis by 22mm y direction.
Print with at least 4 perimeters and 40% infill as this is a structural part. Can be printed in PLA but recommend PETG or ABS.