Mounts which allow fastening a Mean Well SE-600 series power supply to a panel or board. Print a set of four. There are two versions -- regular mounts the power supply with the terminals close to the mounting surface, inverted mounts the power supply higher away from the surface.
The SE-600 mounts with M3 bolts, allowing a 4mm depth. Mounts are 6mm thick, allowing an M3 10mm bolt to safely fasten the mount to the power supply. Anchoring hole is sized fo a #8 screw.
I printed these with 5 shells to support pressure from the bolts and to allow a small drilling allowance if you need to enlarge the anchoring hole.