**Assembly Instructions** 1. Cut a 1 1/2 inch wide hole in the spool where filament used to be wound. 2. Thread extension cord through that hole into the side hole of the spool. 3. Wedge outlet side of the extension between the 2 parts and push them inside of the filament spool hole. 4. Mount wire clip into smaller holes.
**Printing Tips** - Print wire clip vertically so cantilever clips are strong. - Preferrably use tree supoprts. - I had to adjust "X/Y support distance" to 0.3 so all supoprts are generated. - Idesigned it using onshape. [Here is a link if you want to remix it](https://cad.onshape.com/documents/e8ad9728a346483fd91057b7/w/a0652649e6a32e38978cddc9/e/30e29bd4c50aa7afd904b6bb) there.