DIN-Rail Adapter for Raspberry Pi 4 Case (4897114)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
Adapter to mount the Raspberry Pi 4 case from JOY-IT to a DIN-Rail.
This is an adapter to mount the Raspberry Pi 4 case ALUCASEP4+08 from JOY-IT to a DIN-Rail.
I did not find a good solution for a DIN-Rail case so I decided to use this standard case and applying an adapter. The case is fully out of aluminum and gives a good passive cooling to the Raspberry Pi 4. By (ab)using the cable slot of the extension slot cable no drilling or other work is necessary on the case.
There is also variant to attach an SSD (Intenso Portable SSD Premium) for a file server application.
Needed material:
1x M3x25 screw
1x M3 nut
2x tapping screw 2.2x4.5mm
Printing
The parts are printed in PETG. But other material may be used as well.
The spring for the snapper should be printed in TPU. I used Das Filament TPU V2 which has a Shore hardness of 94A.
This is an adapter to mount the Raspberry Pi 4 case ALUCASEP4+08 from JOY-IT to a DIN-Rail.
I did not find a good solution for a DIN-Rail case so I decided to use this standard case and applying an adapter. The case is fully out of aluminum and gives a good passive cooling to the Raspberry Pi 4. By (ab)using the cable slot of the extension slot cable no drilling or other work is necessary on the case.
There is also variant to attach an SSD (Intenso Portable SSD Premium) for a file server application.
Needed material:
1x M3x25 screw
1x M3 nut
2x tapping screw 2.2x4.5mm
Printing
The parts are printed in PETG. But other material may be used as well.
The spring for the snapper should be printed in TPU. I used Das Filament TPU V2 which has a Shore hardness of 94A.
Reviews
There are no reviews yet. Be the first one to
write a review.
