Got the Winwing button boxes and wanted a way to attach them to my Monstertech throttle mount.
- Winwing Panel Mount.stl - 6 screw version accepting M5 screws. It turns out my eBay M5 T-nuts are for the smaller extrusions and not the 4080 ones Monstertech uses. Make sure you get the right T-nuts! - Winwing Panel Mount - Flat Screw v2.stl - 4 screw version accepting the M8 flat screws that Monstertech sent me as extras. v2 has the screw holes enlarged to 9mm which should solve plastic threading issues.
I used PrusaSlicer with Dr. Lex's configs to slice. PLA-mediumStrong 0.2mm layer height with build plate supports. 50% infill but it turned out very rigid so you might be able to get away with less.
You should scale the model to 101% to ensure easy fit unless you have a very dimensionally accurate printer and filament.