MADTAG_f18 smoke absorber fume extractor main file (5233138)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
So.. I created this last year, but I was depressed and decided to put my project in the drawer.
Today I'm better, so I decided to give this little gift for 2022.
works fine on PLA or PeTG
Its a modular "armored" fan smoke absorber. or you decide what is this. ( fresh vent and etc )
You need:
8 screws 4mm x 45mm do not include the head.
8 nuts,
1x xt60 port if you want to connect to a lipo battery,
1x mini switch on/off
1x jack to connect the 12v plug.
this body configuration is for 80mm x 80mm x24.5MM fan
the spacer arms print 4x dont forget
Included internal tray support to use activated carbon filter or other filter of your choice.
If you want you can use it without the filter to push the wind directly into the VTX of the drone racers when doing the tests and repairs. the parts are modular and there are several add-ons that you can download separately if you need to.
This body can be used attached to a backpack.
Attention: you can print for your own use but you cannot sale this.
ADD-ONS LIST: (EXTRA PARTS)
Soldering wire rool arm:
https://www.thingiverse.com/thing:5223598
Armored Legs:
https://www.thingiverse.com/thing:5223588
Sponge arm:
https://www.thingiverse.com/thing:5223602
https://www.youtube.com/watch?v=3EClWR8QxCQ
i am posting more videos on the week ( assembly guide e etc )
Today I'm better, so I decided to give this little gift for 2022.
works fine on PLA or PeTG
Its a modular "armored" fan smoke absorber. or you decide what is this. ( fresh vent and etc )
You need:
8 screws 4mm x 45mm do not include the head.
8 nuts,
1x xt60 port if you want to connect to a lipo battery,
1x mini switch on/off
1x jack to connect the 12v plug.
this body configuration is for 80mm x 80mm x24.5MM fan
the spacer arms print 4x dont forget
Included internal tray support to use activated carbon filter or other filter of your choice.
If you want you can use it without the filter to push the wind directly into the VTX of the drone racers when doing the tests and repairs. the parts are modular and there are several add-ons that you can download separately if you need to.
This body can be used attached to a backpack.
Attention: you can print for your own use but you cannot sale this.
ADD-ONS LIST: (EXTRA PARTS)
Soldering wire rool arm:
https://www.thingiverse.com/thing:5223598
Armored Legs:
https://www.thingiverse.com/thing:5223588
Sponge arm:
https://www.thingiverse.com/thing:5223602
https://www.youtube.com/watch?v=3EClWR8QxCQ
i am posting more videos on the week ( assembly guide e etc )
Reviews
There are no reviews yet. Be the first one to
write a review.
