Due to popular request, this is my first rendition of freeze dryer tray dividers. This was created with the medium trays in mind though it would be simple to rescale or modify for other sizes/uses.
These are designed for tab/slot assembly to accommodate most 3D printer build plate sizes though a newer rendition may drop this approach altogether. I know this design is less than ideal but a few people wanted something ASAP and I wanted to give them an option.
YOU DO NOT NEED ALL FILES. The multiple files are for convenience.
For a complete set you need to print a total of 9 "Dividers" and 3 Longs consisting of 3 A's, 3 B's and 3 C's. You decide which file groups are most convenient.
A raft is helpful but not mandatory if your printer is dialed in well. A,B and C should fit snuggly, possibly needing a bit of sanding, can be glued but may be handy to break them down for storage unless they fit so well they don't come apart again, like mine.