Skip to main content
Internet Archive's 25th Anniversary Logo

Transstellar Journal Publication & Research Consultancy (TJPRC)

Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC Pvt. Ltd.) is a privately held company, dedicated to the global dissemination of information through an unparalleled commitment to quality, reliability, and innovation. As of today, we are one of the leading national and international journal publishers and distributors of our research journals and serve more than 10 million scientists, research scholars, educational institutions, governmental bodies, corporate, sc...


rss RSS

7,255
RESULTS


Show sorted alphabetically

Show sorted alphabetically

SHOW DETAILS
up-solid down-solid
eye
Title
Date Published
Creator
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 9

favorite 0

comment 0

The increasing congestion and uneven motorist traffic which leads to the difficulties of daily commuters and riders is a growing problem in the area. It needs to be addressed in order to save time and expenses incurred by people. This paper provides insights on the previously stated methods and analyses them in order to find a suitable plan to be imposed and developed in the specified area. The designing id is done by taking into consideration the specific difficulties faced by people in...
Topics: Intelligent Transport System, Traffic congestions, Traffic management, Srinagar, Artificial...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

Biodiesel as a fuel has the potential to reduce emission and can be utilized as an alternative for the conventional fuel source. It also reduces greenhouse gas emissions. To reduce the harmful effect of the emissions, and to have an enhancement in combustion characteristics, Nanoparticles can be blended with biodiesel. An in-depth analysis of the evaporation and combustion characteristics of the fuel with the addition of Nanoparticles is critically observed in the paper from the recent...
Topics: Biodiesel, Nanoparticles, Emission, Combustion Characteristics & Evaporation
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

The worldwide growing demand for electrical power, increasing fuel prices and rising concerns about climate change have attracted attention to renewable energies in the last decades. Specially, Jordan severely suffers from sources of energy; which affects its economic level. Even though solar power technologies have progressed a lot in the past years, still low efficiency and high initial cost are the main obstacles for prevalent use of such technologies. A back-surface cooling channel with...
Topics: PV Panel, Efficiency, Water Cooling, Operating Temperature & Indoor Test
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 23

favorite 0

comment 0

The present study was carried out to give preliminary data on positive effects of vestibulator on different types of cerebral palsy children using Vestibulator to see the effect of controlled vestibular stimulation on muscle tone, reflex responses and the ability to balance at Posat foundation rehabilitation centre during December 2017 to March 2018. Clinical trial was carried out with 24 sessions on vestibulator and the results were statistically analysed. 
Topics: Cerebral Palsy, Vestibulator & Vestibular Stimulation
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 19

favorite 0

comment 0

Flexible strain sensors are being researched excessively. The primary thoughts of maximizing the interfacial contact/ bonding between the additives and the polymer is being achieved through wrapping of carbon nanofibers with polymers and then using them as strain sensors. This causes enhancementin sensing strain of the composite. In this work, we present the novel method that can be used to wrap CNFs with polymers like Polyaniline and polypyrrole. Both polyaniline and polypyrrole have that same...
Topics: Strain Sensor, Nanocomposites, Carbon Nanofibers, Wrapped CNFs & Polymer Wrapped CNFs
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 25

favorite 0

comment 0

The main objective of this article in the experimentally investigation of the influence of die heat treatment on the surface hardness and wear properties of H13 steel. Heat treatment forH13 steel experiments were carried out under different quenching temperatures and the samples were tested to examine its mechanical properties, hardness, and roughness. The results of this study show that the mechanical properties of H13 was brilliant at 1020°C after vacuum quenching. The mechanical properties...
Topics: Heat Treatment, Hardness, Roughness & Quenching
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

The article presents the results of experimental studies of authors on the development of compositions and technology for the production of dry plaster mixtures on the basis of fly ash of thermal power plants. This technology includes the production of slag binder by mechanochemical activation of blast-furnace granular slag with hardening activators and preparation of dry mixtures with the introduction of mineral, polymeric, reinforcing and air-entraining additives into their composition. The...
Topics: Cogeneration Station, Ash-Slag Waste, Ash-Slag Dumps, Cellular Concrete, Dry Plaster Mixtures,...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

This article presents a study on prediction of residual stress on the surface layer of workpiece when grinding AISI 1045 steel. Johnson-Cook's material model has been applied to build a relationship between residual stress on the surface layer and the parameters of the machining process. That relationship is used to predict the value of residual stress when grinding. The results of prediction of residual stress were compared with the experimental results. The results show that the residual...
Topics: Johnson-Cook’s Material Model, Prediction of Residual Stress when Grinding & AISI 1045 Steel
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 16

favorite 0

comment 0

The present work is based on the optimisation of the process parameters during milling of brass C360 with using Taguchi method with grey relational analysis. Nine experimental trials are conducted using Taguchi orthogonal Array. Tool speed, feed rate & cutting depth are optimized by taking different performance characteristics as a response such as surface roughness (Ra ) & material removal rate (MRR). Analysis of variance (ANOVA) has been applied to find out the contribution of control...
Topics: Taguchi Method, GRA, ANOVA & MRR
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

A product's sustainability fails if its standard function deviates from the desired working conditions (i.e., by making an unscheduled stop), which makes less competitive. This study aims to develop a smart autonomation system via closer monitoring of the time series' forecasting model of deviation behavior to enable it to stop for maintenance when needed. The proposed methodology (Artificial Poka-yoke; APY) achieves the objective via two sequential phases focusing on improving the...
Topics: Lean Manufacturing, Poka-Yoke, ARIMA, Neural Network Model & Deviation Forecasting
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 20

favorite 0

comment 0

Balkhash Copper Plant obtains sulfuric acid from metallurgical gases, which is received from melted copper charge and converted matte. Slime from wet gas scrubbing is discharged into the dump. It results in the loss of more than 30% of selenium from the copper anode slimes received at this plant. This work presents the compositions of lead and selenium and the material composition of these elements in slime samples taken in different years. We presented the results of a study on the conversion...
Topics: Slime of the sulfuric acid workshop of the Balkhash Copper Plant, Lead, Selenium, Leaching,...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

Enhancement of various nano fillers in the glass fibre polymer composites has been studied in many fields of science and engineering with the aim of strengthening glass fibres and obtaining better performance with addition of nano fillers. To study and evaluate the visco elastic parameters in composites, dynamic mechanical analysis technique was adopted. In the present work, glass fibre reinforced epoxy composites with different graphene nano filler loadings were fabricated using the hand...
Topics: Nano Filler, Graphene, DMA & Glass Fibre
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 22

favorite 0

comment 0

In Nuclear Power Plant (NPP), it is necessary to remove particulate matter and gaseous pollutants from gas stream before releasing into atmosphere during abnormal conditions such as severe accidents. There are many efforts have been made in past to remove pollutants. In view of environmental aspects and stringent regulation of nuclear safety, this paper presents experimental investigation on performance of venturi scrubber. The experimentation is carried out in submerged condition. The venturi...
Topics: Contaminated Air, Scrubbing Fluid, L/G Ratio, NPP, Primary Tank & Suction Venturi
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transellar Journal
texts

eye 23

favorite 0

comment 0

This work examines the effect of grain size on the surface hardness of pack carburizing mild steel. The pack carburizing procedure aims to add carbon into surface of speciments (mild steel SS400). The carbon source commonly used in previous researches is charcoal teak, coconut shell charcoal, bamboo charcoal and palm cernel shell charcoal. The corn cob charcoal has not been used in previous studies. In the study, used corncob charcoal with a variety of grain sizes, A carburizer composed of corn...
Topics: Mild Steel SS400, Pack Carburizing, Grain Size, Surface Hardness Number, Carburizing Time &...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 22

favorite 0

comment 0

Metal Matrix Composites (MMCs) are widely used in many engineering applications nowadays and play a key role, especially AZ31 magnesium alloy got much importance due to its specific characteristics suitable for both Engineering and Biomedical fields. In this work, MMCs with the pure AZ31 Magnesium alloy as matrix and Calcium silicate (CaSiO3 ) as reinforcement were developed with a bottom pouring type stir casting machine in argon gas inert atmosphere. The percentage of CaSiO3 has been...
Topics: AZ31, Calcium Silicate, Hardness Test, Magnesium Composite & Stir Casting
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 26

favorite 0

comment 0

The load-bearing capability of the carbon fiber structure with different ply orientation is studied in this paper. The material properties like Density, Volume fraction and tensile strength are experimentally known according to ASTM standards, and the remaining properties are collected from the material group; the same was used in the load analysis using ANSYS. A standard angular section is prepared using carbon epoxy material by Hand layup process to understand the challenges in the...
Topics: ANSYS Software, Tensile Strength & Carbon Fiber
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

To prevent accidents, the vehicles have to be designed for stopping at shortest distance on braking without losing control. Still researchers are studying on advances in Anti-Lock Braking System (ABS) for different road conditions. From the investigation, it is found that the ABS performance on rough road surface decreases because of lack of predictability in road surfaces. The performance can be enhanced in rough road by controlling the suspension and using proper intelligent prediction...
Topics: Antilock Braking, Artificial Neural Network (ANN), Quarter Car, Rough Road Surface & Stopping...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

This paper presents the thermodynamic study of valveless pulsed combustor when fuelled with propane gas. Methodology for evaluating the exergy performance was developed using the mass, energy and exergy balance between the input and output material streams in the combustor at ambient temperature. At three different consumption rates of fuel and air, the highest exergy efficiency of 65.61 % was obtained at the combustion chamber at 0.0013 kg/s of propane gas neglecting heat losses at the...
Topics: Combustor, Efficiency, Exergy, Gas & Temperature
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

In the present paper, a nonlinear dynamic model representing scrub nurse robotic manipulator was developed. The mathematical model considers the different motions of robot arms. The Scrub Nurse Robotic manipulator (SNR) consists of two links, end grabber, moving base connected to stationary base, four revolute joints, speech recognition and image processing systems. The model considers the simultaneous rotational motions of links and joints. The correct distribution of links’ masses helped in...
Topics: Robotic Scrub Nurse Manipulator, Mathematical Model, Torque, Links Angle, Arduino & Fuzzy System
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 18

favorite 0

comment 0

Vertical tail VT is one of the main components of the airframe. VT is attached with a rudder, which is the control surface, which is used for controlling the yawing motion of the aircraft. The deflection of the rudder introduces side load on the VT. Without rudder deflection, the aerodynamic load will not be applied to the VT. The load due to the deflection of the rudder is the major load for the VT. From a design point of view side, gust load is also important in transport aircraft. The...
Topics: Transport Aircraft, VT, Stiffened Panel, Sideload, FEM, Fatigue Failure & S-N Curve
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 12

favorite 0

comment 0

Al-Si alloy reinforced with the particulates of granite acquired from cutting of rock stones along with the graphite particles have good mechanical properties. The composite materials were prepared with various weight proportions of the strengthening particles to evaluate the mechanical characteristics. This has been achieved by manufacturing by stir casting method, hardness, density studies of tensile and compression on both alloys and composites were completed. Better durability and tensile...
Topics: Al-Si alloy, Granite Particles, Graphite, X-Ray Diffraction and Energy Dispersive Spectroscopy.
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 1

comment 0

Aluminium is known to have lightweight, good corrosion sustainability and perfect abilities to be recycled. Combination of these benefits attracts engineers to apply aluminium more and more. Among main disadvantages of aluminium are low hardness and plasticity. Thislack ofstrength createslimitations for applying aluminum alloys in high loaded construction. There are known many techniquesfor providing strength propertiesfor aluminum parts, among which Laserimplantation is one of the most...
Topics: Laser Implantation, Aluminum Alloy Hardening, Impact Resistance, Face-Hardening & Laser...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 21

favorite 0

comment 0

Plants are among the most important and common sources of potentially valuable drugs. Rhazya Stricta Decne is a traditionally important plant in Oman with medicinal properties. The aim of this study was to determine the antimicrobial activity and hemocompatibility of leaves and stem extracts of R. stricta. Phytochemical investigation of different solvent extracts of the leaves and stems of this plant resulted in the identification of various chemical constituents, such as alkaloids, saponins,...
Topics: Rhazya Stricta, Extract, Antimicrobial, Hemolytic & Minimum Inhibitory
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 12

favorite 0

comment 0

Composite material is a material consisting of two or more physically or chemically distinct phases, suitably arranged or distributed together to get improved mechanical properties. Nowadays, a wide range of composite engineering materials shows natural fiber-reinforced polymer composite hasplayed a vital role in manufacturing industries. These composites possess a combination of superior mechanical properties as well as resistance to environmental degradation. The conventional polymer-based...
Topics: Hand Layup Moulding system, Vinyl ester [VE], Grewia Asiatica/Phalsa Woodfiber & Composite
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

In this investigation, post weld ageing treatment and its effect on tensile and micro structural characteristics of extruded, friction welded hybrid AA6061/SiC/Graphite composites are experimentally analysed. The tensile strength, yield strength, notch strength and elongation were evaluated. They were found to be inter-related with micro-structural and hardness characteristics. The tensile as well as micro structural characteristics of as-welded and post weld artificially aged joints are...
Topics: Hybrid Metal Matrix Composites, Friction Welding, Stircasting, Extrusion, Artificial Ageing &...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 19

favorite 0

comment 0

In manufacturing industries, material handling is an essential task in moving the materials from one place to another. Among the material handling systems, manual handling is a usual practice in many industries. However, in large production setups, where the production rate is high and the product is huge and complex, the manual handling of materials is not possible. Manual material handling demands a lot of human effort and also affects the workers ergonomically. This paper explains the draw...
Topic: Adjustable Height Type Conveyor. Ergonomic Assessment & MSD
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 33

favorite 0

comment 0

This paper represents an attempt at analyzing the legal framework within which employment Relations is practiced in Nigeria, focusing on the tortuous evolution of the labor and social laws for the practice of Industrial Relations. The paper adopted a descriptive and historical method in analyzing the legal framework for the practice of employment Relations in Nigeria. The paper noted that the evolution of this legal framework is seen to be tortuous because its emergence led to the following...
Topics: Tortuous Evolution, Voluntarism, Interventionism, Promulgation, Recommendation, Ratification,...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

In the contemporary scenario, folks who are embracing righteous mannerism and communal uprightness for a viable social order will surely encounter the devastating sway of public and ethical revelations leading to inter and intra societal clash es. As soon as family, a constructive social unit embraces an indifferent stance towards a person's veracity, over and over again it will culminate into psychological turmoil or viciousness, as depicted through protagonist Baako, his blind grandmother...
Topics: Ostentation, Pre-Colonial Astuteness, Neo-Colonialism & Feminine Power
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 21

favorite 0

comment 0

Agriculture contributes almost 20% to the overall GDP of Pakistan & its production is about 40 million tons annually. The major crops of Pakistan include wheat, maize, rice, pulses. Since agriculture in Pakistan is gradually being commercialized, because of technological modifications, innovations and grouping rate of consumers demand keeping this importance under consideration, greater emphasis is laid upon production of value-added agricultural products rather than producing raw products...
Topics: Grain Grading and Cleaning, Bamboos, Wind Cleaning & Shorter Lead time
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 29

favorite 0

comment 0

This paper aim is to bring some improvement or amelioration in the conditions of life of the poor masses of the country who are Untouchable. Anand’s Novel is a scathing critique of the oppressive caste system. He launches this critique through series of events that take place in the life of an untouchable man. Even something considered as seemingly minor incident like accident brush with a man from higher caste is enough for Bakha to be verbally assaulted by mob. Anand describes a range of...
Topics: Scathing Critique, Untouchable, Oppression, Orthodoxy & Eradication
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 13

favorite 0

comment 0

This paper presents an experimental study on surface roughness parameters. On that basis, a more comprehensive view of surface roughness was given. Experiments on milling 40Cr steel with a face mill have been carried out to build the relationship between surface roughness and cutting parameters. A multi-objective optimization problem was also performed to determine the value of the cutting parameters to ensure that the machined surface has a small value of roughness. 
Topics: Surface Roughness, The Arithmetic Average Height Parameter, Maximum Height of Profile, Ten Point...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 11

favorite 0

comment 0

Titanium alloys Ti6Al4V largely used material in aerospace structural industries for its indispensable characteristics of the material for its good formability, strength, light weight and corrosion resistance. Most precision-machined components are made using titanium-based alloys in aerospace applications. The challenges in machining of titanium alloys remains the same and even tough during high cutting speed for precision milling of mating components . The titanium alloys are now grouped as...
Topics: High Speed Machining (HSM), Average Surface Roughness (Ra), Titanium Alloy, Response Surface Method...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 20

favorite 0

comment 0

Titanium is found to be one of the hardest elements and hence machining of Titanium has always been considered as a challenge in the manufacturing field. Out of all machining process, drilling is considered to be difficult and has to be done with much care and perfection because undercut or overcut holes may result in the failure of the particular part or assembly. Hence, it is very important to study more about drilling parameters on hardest metal like Titanium as the drilling of titanium is a...
Topics: Titanium, Drilling, Ti-6Al-4V, Cobalt, Temperature, Force, Torque & SEM
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 18

favorite 0

comment 0

This paper mainly focuses on developing new transmission drives for Hybrid drive systems. In the current world, we can observe different Hybrid drive systems in which Toyota Prius is one of the well-known hybrid drive system, but the problem with these systems are that they are large in size and the initial investment for manufacture is quite high which makes them confine to four wheeler drives. By a survey, most of the countries of Asia continent use motorcycles as their primary mode of...
Topics: Hybrid Drive System, Continuous Variable Transmission, Centrifugal Clutch & Transmission System
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

Computational Fluid Dynamics (CFD) is a simulation tool that is used to analyse thermal phenomena and complex fluids. In this study, the coolant flow parameters in the sub-channels of fuel assemblies in the VVER-1000 reactor were examined by ANSYS R2. It was examined in different meshes accuracy and turbulence models to deal with the flow of water distribution problems such as velocity, pressure change as well as hydraulic resistance to the meshes of separation. The aim of this paper is to...
Topics: 3D Modelling, CFD, Fuel Assembly, Heat-Mass Transfer, Hydrodynamic, Sub Channel, Turbulent Flow,...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 21

favorite 0

comment 0

Tests were taken to determine exhaust emissions of a petrol engine having cuprum sprayed engine [CuE, Cuprum of thick, 0.3 mm ) sprayed on the top portion of the piston and interior portion of cylinder head] coupled with catalytic converter (CC) with iron of sponge as oxidizer with two fuels of petrol and petroleum mixed with butanol (85% petrol and 15% butanol by V) and correlated with data of standard engine (SE) with operation of petrol. The effects of variables of engine with variety of...
Topics: Petrol Engine, Butanol, Cuprum Sprayed Engine & Products of Exhaust, and CC
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 29

favorite 0

comment 0

In this paper, the effect of of connection tube material in calibration system on the measurement of dew point temperature for Dew Point Sensors (DPS) and estimation of measurement uncertainty were investigated by means of experimental and statistical technique. The calibrations for the sampling DPSs as the experimental method due to tube materials were performed for over a year. The investigation was focused on variances of correction and deviation of measured dew points indicated by...
Topics: Dew Point Temperature, Tube Material, Calibration, Measurement Uncertainty, Uncertainty...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 34

favorite 1

comment 0

Hail ice impact events are very usual and hazardous to aircraft structures particularly in adverse weather. Hail ice impact falls under the preview of the Foreign Object Damage (FOD) and the aircraft structures are required to be validated for certification of the aircrafts. Numerical simulation is an cost effective method before the experimental studies. The modeling of the hail ice characteristics is a significant challenge in area of the soft body impact. Hail Ice is modeled using Lagrangian...
Topics: Hail ice, Impact, Foreign Object Damage & Numerical Simulation
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 16

favorite 0

comment 0

Friction stir welding (FSW) of AZ 91D Magnesium alloy has been undertaken with an objective to find the optimal parameter condition for the mechanical properties of the welded joints. Empirical regression equations are developed for all the responses. The variation in mechanical properties at different parameter combination is attributed to change in microstructure during the welding process. Tool tilt angle is governing uttermost while a comprehensive study on all mechanical properties is...
Topics: FSW, Magnesium Alloy AZ 91D, UTS, Impact Toughness & Micro Hardness
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

The study was carried out to investigate the effect of stem diameter, moisture content of the crop, stroke length and cutter bar speed on cutting energy for development of bengal gram harvester. At present, bengal gram is harvested manually by sickle. Experiments were carried out at two levels of stroke length of the cutter bar (50 mm and 76.2 mm) , four levels of cutter bar speeds (0.25, 0.50, 0.75 and 1.0 ms-1), three levels of stem diameter (3 to 4.5 mm, 4.51 to 6 mm and greater than 6 mm )...
Topics: Bengal Gram, Cutting Force, Cutting Energy, Stroke Length & Cutter Bar Speed
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

The proposed project work is to fabricate and compare the mechanical properties, of Al2214/SiC composites. The composites were processed by using stir casting method and amount of SiC, is assorted from 2-10 wt% in level of 2 wt%. The prepared composites of Al2214/SiC are to determine the mechanical character such as Microstructure, UTS, YS, Compression Strength, as per the ASTM standards. The obtained consequence shows that casting was equally distributed without any cracks, voids and...
Topics: Aluminum Alloy (Al2214), Silicon Carbide (SiC), UTS, YS & Compression Strength
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 6

favorite 0

comment 0

In the present work, solidifying melt of LM6 was subjected to low frequency vibration and the effects on microstructure and dry sliding wear were studied. Volume loss due to wear under different service conditions of varying normal load, sliding speed and sliding distance was considered for investigation. The other beneficial effects of mold vibration include grain refinement.  
Topic: Mechanical Mold Vibration & Dry Sliding Wear Test
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar journal
texts

eye 25

favorite 0

comment 0

Currently, servo mechanical presses with an actuator based on a slider-crank mechanism are widely used for stamping details. One of the major problems of these servo mechanical presses is inclination of slide caused by eccentric application of deforming force and total linear elastic deformation of the press links and stamps under load. The inclination of the slide of the servo mechanical press reduces the accuracy of punching and causes its jamming and lead to its breakage. To eliminate these...
Topics: Servo Mechanical Press, Actuator, Stephenson II Six-bar Linkage, Slide & Tilt
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

A comparative study was conducted to evaluate the growth parameters and the germination of two Solanaceous crop tomato and potato under green house condition in seedling trays. The aim of this study was mainly focused to evaluate the response of the KSB isolates along with PSB and KMB on germination and growth. The experiments were conducted in seedling trays containing coco pith and vermi compost at 2:1 ratio. Three Potassium Solubilising Bacterial (KSB) isolates along with Phosphorus...
Topics: PSB, KSB, KMB, Seedling Growth, Green House & Biofertilizers
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 35

favorite 0

comment 0

The study aimed to identify the social and demographic characteristics of the children surveyed, to the electronic games that children play and to the electronic devices that children use in playing the games through them, and to explore the dimensions that result from children playing electronic games on their social lives and to identify statistically significant differences (α = 0.05) between them on the basis of other factors such as gender, age, father’s job type, mother’s job type,...
Topic: Child & Electronic Games
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

Titanium alloys not only have high physical and mechanical properties, in addition, they are the most suitable materials for medical use among metal biomaterials. The machinability of titanium alloys depends on the phase and chemical composition, microstructure parameters and selected cutting conditions. Titanium alloy Grade 5 is used for research, its properties are as close as possible to the analogue of medical titanium alloy. Therefore, it is experimentally determined the surface roughness...
Topics: Implant, Titanium Alloys, Cutting Conditions, Processing Technology, Surface Roughness &...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 30

favorite 0

comment 0

In the modern developments to increase the methodologies in liquid state welding process, a new concern about the solid state welding shall be looked after as a change in scenario as it may be suiting in many places as a replacement because of its improved characteristics over the case compared to liquid state welding process. Here in our work, we take the case of friction welding process for joining various combination of the following aluminium alloys 5083, 6061, 7075 were taken for...
Topics: Friction Welding, SEM & Aluminium Alloy
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 28

favorite 0

comment 0

Material handling is a system or combination of methods, facilities, labour, and equipment for moving, packaging and storing of materials to meet specific objectives. A stacker is a machine used in material handling unit. In the present study among the different stackers which are manufactured in maini material movement private limited, electric stackers are considered. These electric stackers can move in horizontal and vertical directions. The vertical movement is controlled by hydraulic...
Topics: Cycle Time, Critical Path Method & Electric Stackers
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 12

favorite 0

comment 0

In this study, the influence of two process parameters (concentration of inhibitor and temperature) on the corrosion current density and inhibition efficiency of 6063 Al alloy in 0.5 M NaOH environments using Coriandrum Sativum L. Extract (CSE) were examined by response surface methodology (RSM). The parameters considered for the study were found in 5 levels: temperature (X1 ) at 30, 35, 40, 45 and 500C and concentration of inhibitor (X2 ) at 0.1, 0.2, 0.3, 0.4 and 0.5 g/l was taken to...
Topics: Coriandrum Sativum L., ANOVA, Regression Analysis, Response Surface Methodology, NaOH Environment...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 16

favorite 0

comment 0

This research work studied the relationship between human resource management (HRM and Church growth. The study surveyed HRM influences on church growth in Rivers state. It examines three dimensions of HRM: leadership, development and compensation. The measures of the Church growth are spiritual and personal growth. The study revealed a positive connection between HRM and church growth.  
Topics: Human Resource Management (HRM), Leadership, Development, Compensation & Church Growth
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

An emission from public transportation is a major concern today. The immediate need is to reduce the emissions and improve the efficiency and performance of these vehicles. This is not possible with the convention engines as they are designed for low compression ratio (CR) and for specific fuels only. To achieve this with less cost, the only option available is dedicated CNG engine in which higher CR can be used as compared to conventional engines. An experimental study was conducted on this...
Topics: Dedicated CNG Engine, Compression Ratio, Brake Power, Brake Thermal Efficiency & Emissions
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 16

favorite 0

comment 0

The performance of mild carbon steel was improved slightly by additional alloys, but these incremental changes were not sufficient to maintain the high operating temperatures. This article discusses the surface hardness of mild carbon steel in the local market and the tensile properties. To achieve this objective, carburizing surface treatment is used. Specific carburization temperatures were used for 825 ° C, 850 ° C, 875 ° C and 900 ° C, 3 hours, 6 hours, 9 hours, 12 hours, 18 hours and...
Topics: Hardening, Carburizing, Annealing & Mild Carbon Steel
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 21

favorite 0

comment 0

The structural solution of such parts in terms of complexity and manufacturing material is diverse. The fittings are lowtech castings, in connection with this, it is necessary to clarify the power features of such cyastings. Austenitic chromiumnickel steel valves castings have stringent tightness requirements. The reason for the violation of the integrity of the castings during operation is most often captured (provided that the porosity does not receive excessive development). As a measure to...
Topics: Steel Flange Valves, Directional Solidification Gradient, Valves Density and Reliability, Valve...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 7

favorite 0

comment 0

Home making is such a complex process for African Americans that they have to move across different spatial scales in order to make home possible for them. This movement, whether forced or intentional, helps them spatialize their idea of home which they constantly carry with them. Consequently, they have to deal with multiple homes and identities. The legacy of slavery keeps on haunting them and memory plays a vital role in evoking past trauma in the present when exposed to a similar situation...
Topics: Home, Space, Journey, Nation, Beyond & Memory
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 25

favorite 0

comment 0

This paper presents an experimental work on the development of natural fiber reinforced polymeric composites. The powdered rosin, flax fiber, sisal fiber and sunn hemp fiber are utilized as fillers or reinforcements with epoxy resin for making hybrid composites. The fiber and resin compositional proportion in each specimen are 1:1 while the epoxy resin and hardener composition is 10:1 respectively. In the first type of hybrid composite, only sunn hemp and sisal fibers were added and in the...
Topics: Rosin, Polymer matrix composite (PMC), Mechanical Properties, Sunn Hemp Fiber, Sisal Fiber, Flax...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 21

favorite 0

comment 0

The influence of the chemical theraphy of sisal fibres during the enduing procedures of mercerization (alkali treatment), silane handling and ultimately acid hydrolysis on the morphology and thermal behaviour of sisal fibre-epoxy resin composites were examined. Scrutinizing electron microscopy examination indicated the chemical handling procedures led to a reduction in the transverse dimension of the cellulose cells and an attendant reduction in the cross-sectional dimensions of the sisal...
Topics: Morphology, Thermal, Silane, Mercerization & Epoxy
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

The project aims at developing a system which makes use of wind, piezo and solar energy for rural and urban electrification. This project cuts down the floor space used by conventional wind mills and solar panels. This configuration allows the three sources to supply the load depending on the availability of the energy sources. Energy is being generated from the three sources such as solar energy, wind energy and piezo electricity and in turn is being generated from the sun light, wind, and...
Topics: Wind Turbines, Piezo Sensors & Arduino Uno
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 22

favorite 0

comment 0

An abaqus software is used to evaluate fatigue testing of tie bolt holes in a typical gas turbine compressor disc. The material properties needed for the disk are taken as a grade TI-8AL-1MO-1V Titanium alloy. The research focus is on the impact of Uniaxial loading and cyclic rotation speed is subjected to the disc. A solution is fully obtained under uniaxial loading for a disc, numerical analysis measures the problems for the disc. 
Topics: Rotating Disc, Uni-Axial Stresses & Fatigue Test
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 16

favorite 0

comment 0

Any wind turbines efficiency mainly depends on the material of the wind turbine, shape of the turbine blade, speed of the wind and blade angle. Here material plays an important role in design of wind turbine blade. Wind turbine blades are mostly made of more density materials such as steel and aluminum. This is main cause for huge weight and it has less fatigue strength and more corrosion rate. The high density materials can be replaced by composite materials such as GFRP to reduce the weight...
Topics: GFRP, Structural Analysis, Modal Analysis & ANSYS Workbench
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

In this research, new Technique was developed to perform three different operations in the same stroke, namely conventional spinning, shear spinning (wall thickness reduction) and burnishing processes. Experimental work was conducted and confirmed the success of the presented technique. The response of the product quality and required load to process parameters such as rotational speed (46,76,150 and 230 rpm), axial feed (0.15,0.3,0.6 and 1.21 mm/rev), burnishing load (20, 25 and 30 KN),...
Topics: Combined Processes, Conventional Spinning, Shear Flow Forming, Ball Burnishing, Hardness &...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 33

favorite 0

comment 0

This research focused on studying the corrosion behavior of API-5L-X65 steel in acidic environment (1M HCl) containing Triethylenetetramine (TETA) and Imidazole (IMI) corrosion inhibitors. Corrosion rate of the API steel coupons were evaluated in 1M HCl at room temperature using both gravimetric and Potentiodynamics polarization techniques. The corroded steel in the HCl was characterized using optical microscope and atomic absorption spectrometer. The result revealed that with increase in...
Topics: Corrosion, Triethylenetetramine, Imidazole, Inhibitors & API-5L-X65 Steel
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 19

favorite 0

comment 0

A numerical investigation of unsteady free convection MHD nanofluid flow and heat transfer over a stretching vertical flat plate embedded in a porous medium is done. Magnetic field of constant strength is applied in transverse direction. With the help of similarity variables, the governing equations are solved. Skin-friction coefficient and Nusselt number are calculated in non-dimensional form. The effect of various physical parameters including in governing equations are shown by graphs.
Topics: Nanofluid, MHD, Unsteady, Grash of Number, Stretching Sheet, Nusselt Number, Skin Friction...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 19

favorite 0

comment 0

The friction stir welding (FSW) process is a recent solid-state joining process to produce the permanent joint of two dissimilar metals. In this paper, the study of the effects of tool rotation speed and welding speed on the tensile strength, Microstructure, Micro hardness properties during friction stir welding process has been done. From the literature, it is understood that tool rotation speed and welding speed play an important role on the mechanical properties and weld quality. Important...
Topics: Friction Stir Welding, Mechanical Properties, Welds Quality, Axial Force & Welding Speed
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 17

favorite 0

comment 0

The article describes the modernization of Unmanned Aerial Vehicle (UAV) to perform observations of satellites. The technical requirements applied to the device and the parameters of the payload and its parameters are verified. Various models used for aerodynamic calculations are displayed and their pros and cons are revealed. Various methods of constructing solid-state models are also displayed. Several different shapes of the dome for equipment placement are proposed. The optimal shape of the...
Topics: UAV, Aerodynamics, Fuselage Modernization, SolidWorks, Forces & Simulation
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 14

favorite 0

comment 0

Sliding and rolling bearings are applied in transportation and production equipment, these bearings operate under high loads in reciprocating/rotary mode. They are used in railroad, road, and agricultural transport for suspensions, dampers, steering, shaft drives, in garment equipment, mining, oil and gas production and processing, as well as some other industries. However, their operation lifetime is insufficient and recovery of such couplings by conventional methods comprised of replacement...
Topics: Repair Kit, Spring Boxes, Vehicle Suspension & Dampers
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 11

favorite 0

comment 0

The behaviour of farmers towards entrepreneurship is vital in constructing more précise approach to problems related to farming, especially, in case of protected cultivation like polyhouse farming which demands high end technologies. Though many studies have been done on entrepreneurial behaviour, this is a novel attempt made with reference to the polyhouse farmers in the Thrissur and Palakkad districts of Kerala in the time period of 2017-2019. Primary data was collected from 30 polyhouse...
Topics: Entrepreneurial Behaviour, Polyhouse Farming, Information Seeking Behaviour & Planning Ability
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 11

favorite 0

comment 0

The present study investigates the effect of nanoparticles on the performance of Paraffin wax in a latent heat thermal storage system. The experiments are conducted using organic compound which is paraffin wax with 0.5, 1 and 1.5% (volume) aluminium oxide (Al2O3 ) nanoparticles. Thermal storage system is designed and fabricated as per the design dimensions. The thermal storage system uses PCM which undergoes the phase change during the charging and discharging cycle. The heat input (Ein), heat...
Topics: Paraffin Wax (PCM), Thermal Storage System, Nanoparticles & Thermal Conductivity
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 35

favorite 0

comment 0

Electromagnetic compression is a high energy rate forming process; in which workpiece in the form of tubes are deform using energy from capacitor bank. This process is a contact free process. It is a solid state forming process. At quasi state condition, less formability of material is found and it create drawback in the form of springback, wrinkling and nonuniform thickness. But at high strain rate materials like 5xxx, 6xxx and 7xxx shows an excellent formability and reduced the springback,...
Topics: Compression Coil, Electromagnetic Forming, FE Analysis, Aluminum AA6061 & Strain Rate
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

The current work mainly focuses on identifying optimal chemical treatment for used jute, for treatment NaOH at three concentrations (20,30,40) with different treatment durations (20,40,60) considered. For post-treatment, three different types of chemicals (Alkaline, Kmno4, BenzylChloride) are taken for the study. The Taguchi technique is used to design the experiments and optimize the parameters. The results have shown that the tensile properties are better for UJE composite treated with 30%...
Topics: Used Jute Fiber (UJE), Chemical Modification, Natural Fiber Composite, Taguchi & Optimization
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 21

favorite 0

comment 0

Wear, which is one of the most important characteristic leads to a costly damage in machine parts, unless it is reduced. All the engineering components are naturally imply with wear. The composites with inclusion of various types of particulate reinforcements of both metallic and non-metallic in Aluminium base metals or alloys are denoted as Aluminium Metal Matrix Composites or simply called as AMMCs. These have tremendous attributes that they can be tailor made with respect to their achievable...
Topics: Aluminium Metal Matrix Composites (AMMCs), Reinforcements, Dry-Sliding & Wear Parameters
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 16

favorite 0

comment 0

Heat treatment effect on corrosion behavior of AISI 4140 steel and thiourea inhibition action on corrosion of AISI 4140 steel in as bought as well as heat-treated conditions such as annealing, normalizing, hardening and tempering in 1N HCl solution at room temperature was investigated using potentiostatic polarization technique. Results shows that heat treatment has negligible effect on the corrosion behavoiur of steel in comparison with the as bought specimen. Different concentrations of...
Topics: Corrosion, Heat Treatment, AISI 4140 Steel, Thiourea, Adsorption Isotherm & Inhibition...
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 18

favorite 0

comment 0

Deployable telescope remain in stowed position in payload fairing of launch vehicle and deployed in orbit to its final form. Development of deployment mechanism is carried out to achieve 100 micron accuracy in separation. Dynamic analysis of Deployment Mechanism is carried out to estimate desired value of stiffness of torsion spring for complete deployment and damping factor of damper to avoid shock at the end of deployment. Actual two link rigid model and flexible model are prepared using MSC...
Topics: Deployment, Telescope, Mechanism, Dynamic Analysis & Damping Factor
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 15

favorite 0

comment 0

This study was conducted to investigate the influence of milling parameters and machining time on the surface roughness and tool wear. The experimental was designed and conducted with three controllable factors-three levels (axial depth of cut, feed rate, and cutting speed) in dry pocket milling processes of aluminum alloy Al7075. Performance measurements that were chosen to perform were surface roughness and tool wear at three machining time (after 90 minutes machining, after 180 minutes...
Topics: Surface Roughness, Tool Wear, Machining Parameter, ANOVA & Al7075
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 29

favorite 0

comment 0

In this paper work, a new combination of composite material is being prepared by the reinforcement of e-glass fibre with epoxy resins by the addition of special soot material with wt % as 0%, 0.1%, 0.5% and 1.0% by compression moulding methodology. Finite element analysis for the composite material with addition of special soot particles was carried out for various loading conditions and results were obtained. Error analysis was also done. It was seen that inclusion of reinforcement contributed...
Topics: E-Glass Fiber, Compression Moulding & Finite Element Analysis
Transstellar Journal Publication & Research Consultancy (TJPRC)
Apr 30, 2020 Transtellar Journal
texts

eye 6

favorite 0

comment 0

Diverse workforce has become dependable today in the diverse work environment. The impact of diversity varies with the type of environment, business strategy, and operations of the management. As organizations compete globally, management has become more prominent for creating advantages and getting a competitive edge. The dynamic organization looks for well-talented people, showing their interests in the workplace and seeking the growth of the industry. The management should embrace and...
Topics: Workplace Diversity, Valuing Differences, Firm Performance, Workers Commitment, Job Satisfaction...