4
4.0
Apr 20, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
This is an extruder upgrade for the Wanhao/Monoprice Duplicator i3 Mini (NOT FOR Monoprice Select Mini). This supports flex filaments as well as stronger feed of PLA and PETG (no slipping). This will get you a consistent extrusion. Note that this will not solve bed adhesion issues. For all 3D printers with non-heated beds, I have found the best solution to be three steps: 1st the cheapest, be sure you are getting a good first layer, get the bed as level as possible. 2nd is a can of hair spray...
Topics: thingiverse, extruder, stl, bowden_extruder, i3 mini, Wanhao i3 Mini, 3D Printer Extruders, Wanhao
1
1.0
May 1, 2021
05/21
by
Andrew Soderberg (mediaman)
data
eye 1
favorite 0
comment 0
I got a request for a Calgary Flames cookie cutter. So here it is. Much thanks go out to 3dpoplauki for the Calgary Flames logo! Remixing from that STL has saved me many hours of work! Be sure to use food grade PLA when printing this cookie cutter and release tools. The plunger release tool will need to be trimmed quite a bit to fit inside the cutter. I used an XACTO knife to shape all the flames smaller and trim the 'C' to fit. It is very difficult to shape the part to be 'smaller in all...
Topics: stl, Calgary, cookie_cutter, Kitchen & Dining, thingiverse, Calgary_Flames
2
2.0
Jan 16, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
##Wham Bam Mutant Static Mobile Plate ####Designed to be used with the Wham Bam Mutant Universal Tool Swapping System for your 3D printer. ####Learn more about the Mutant here: https://whambamsystems.com/mutant ####Welcome to the Mutant Invasion! Print this plate if you want to be able to mount other devices on your Wham Bam Mutant that do not need power (or you're bypassing the Mutant builtin power connections). Also a great addition for test mounting hot-ends onto a Mutant Mobile plate when...
Topics: 3D Printer Parts, mutant, thingiverse, Wham_Bam, stl
1
1.0
Sep 13, 2021
09/21
by
Andrew Soderberg (mediaman)
data
eye 1
favorite 0
comment 0
###Due to Thingiverse not indexing this project properly, the Prusa MUTANT has moved here: ###https://www.thingiverse.com/thing:4948925
Topics: stl, prusa_bear, thingiverse, 3D Printer Accessories, Prusa_Bear_addons, mk3s+, prusa_bear_mk3s,...
1
1.0
Jan 18, 2022
01/22
by
Andrew Soderberg (mediaman)
data
eye 1
favorite 0
comment 0
This is an STL model of the new E3D Revo Six for use in developing hot-end assemblies for 3D printers.
Topics: E3D, 3D Printer Parts, E3D Revo, hot-end, thingiverse, Revo 6, revo, E3D_v6, stl, Revo Six, E3D...
2
2.0
Apr 5, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
This is an office under desk waste/recycle bin version of the popular Trash Walker. Not just resized but reworked to thin the walls down (they were already thick enough at the desktop size) and make for a deeper bin. I have printed this with both a .4mm nozzle and a .6mm nozzle. It would print well even at .8mm. Note that at .6mm the waste bin will take 24-30 hours to print and uses 960 grams of filament (yes, a whole 1Kg roll). This is the single trash bin version of the Dual Trash Walker...
Topics: thingiverse, Trashcan, waste_bin, stl, waste basket, trash, Containers, bin
4
4.0
Mar 4, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: https://www.thingiverse.com/thing:4460970 ------------------ **All issues with previous Hero Me Gen4 and Gen3 have been resolved in the latest generation.** This project will no longer be updated. Hero Me Gen3 bests BantaMount and others in head to head comparison ----------- Hero Me Gen3 bests Petsfang V2 in head to head comparison ----------- August 26th 2019 -...
Topics: EZABL, ender, 4020_fan, 3D Printer Accessories, mount, cooling, CR-10, Creality_CR-10, dual 5015,...
11
11
Jan 12, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 11
favorite 0
comment 0
Update 5/1 2017: Uploaded version 3 of the base. I increased the height of the base core to accommodate a large gap between the cover's rain lip and the base moat (for those with larger ants). I also refined the top cover once more to thicken the rain lip to print better. Update 4/28 2017: Uploaded version 2 of the top cover. Some printers may not like printing the curved edge of the top cover (without supports), so I simplified the edge. Both versions remain available. We are using beehive...
Topics: Ant_trap, thingiverse, stl, beekeeper, langstroth, hive, bee, Outdoor & Garden, beehive,...
5
5.0
Apr 20, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 5
favorite 0
comment 0
For those of you who like to go the minimalist route... From the same designer that brought you all the popular Hero Me remixes... MediaMan introduces the The E3D Minimalist. A simple, clean, lightweight, yet strong mount for your favorite E3D hot-end, V6, Volcano, or clone. Both mounts leave plenty of room and full access to the accessory screw mounts to allow you to add any of the many ABL sensors and or a parts cooling fan and duct. The volcano mount is designed to not lose any Z build...
Topics: thingiverse, E3D, volcano, creality_ender_3, hotend_cooling, e3dv6, E3D_Volcano, E3D_Hotend,...
9
9.0
Jan 10, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 9
favorite 0
comment 0
This version of the very popular fan shroud blends the updated mount brackets spacing of the original and the visibility mod to be able to see the Nozzle. It combines the best of these two: http://www.thingiverse.com/thing:1025471 (DiiiCooler_Rev3-21-V2-1_Beta3.STL) http://www.thingiverse.com/thing:1457547 The brackets at some point changed, and the AA_Diicooler_Fixed version by 3DDOC is using the older spacing See the details for parts and mounting instructions on the original DiiCooler thing...
Topics: fan, thingiverse, Wanhao_i3_mods, Wanhao, stl, Wanhao_Duplicator_I3, hotend, 3D Printer Parts,...
10
10.0
Jan 11, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 10
favorite 0
comment 0
I blended the widened hip, knee, and ankle joints of the Maker Faire Robot remix from tuxcat to include the weapons from steveweber314's remix: http://www.thingiverse.com/thing:841695 http://www.thingiverse.com/thing:454960 If you've got a M3D Micro, Tiko or other real inexpensive 3D printer, this version is for you. It's best for those whose 3D printer can't print the tight tolerances of the original and the weaponized version. This will print fine on higher resolution printers, but the legs...
Topics: M3D, Maker_Faire, monoprice_select_mini, thingiverse, Model Robots, stl, makerbot,...
2
2.0
Apr 30, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
Updated to support the Hero Me Gen5 Master Suite. There is a version for the Creality OEM plastic single gear and roller extruder and another for the Creality metal Dual Gear extruder (also the Winsinn Dual Gear). Follow the recommended printing instructions from the originals this was remixed from.
Topics: stl, hero_me, Hero_Me_gen_5, 3D Printer Parts, thingiverse, herome
1
1.0
Apr 19, 2022
04/22
by
Andrew Soderberg (mediaman)
data
eye 1
favorite 0
comment 0
If you have a Prusa and a Wham Bam HotBox (or other chamber with a slot at the top), this riser will lift the Prusa filament holder above the HotBot.
Topics: 3D Printer Parts, thingiverse, Wham_Bam, stl, Wham_Bam_Systems, Prusa, HotBox
3
3.0
Mar 22, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 3
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: https://www.thingiverse.com/thing:4460970 ------------------ **All issues with previous Hero Me Gen4 and Gen3 have been resolved in the latest generation. Gen4 will no longer be updated (except for the firmware X/Y offset information).** This project will no longer be updated. Hero Me Gen3 bests BantaMount and others in head to head comparison ----------- Hero Me Gen3...
Topics: 5015, 5015_fan_duct, Anet_A8, stl, Hero Me, cooling_duct, 3D Printer Parts, thingiverse, AM8
2
2.0
Apr 30, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
Direct Drive Adapter for Bondtech BMG extruder and the Hero Me Gen5 on an Ender 3 or CR-10/S. This should work with all Hero Me Gen5 compatible hot-ends as they are all positioned in the same place.
Topics: stl, hero_me, Ender_3, speeddrive, 3D Printer Parts, bondtech, thingiverse
2
2.0
Jan 5, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
Remixed from Kopiemn direct drive to support a Bondtech BMG extruder (left hand version). This is configured to line up with hotends mounted in the Hero Me Gen5 cooling system.
Topics: herome, bondtech_bmg, stl, direct_drive_extruder, hero_me, extruder, 3D Printer Extruders, BMG,...
3
3.0
Jan 5, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 3
favorite 0
comment 0
Remixed from Kopiemn direct drive to support a E3D titan extruder. This is configured to line up with hotends mounted in the Hero Me Gen5 cooling system.
Topics: herome, stl, titan, e3d-titan, cr10v2, 3D Printer Extruders, thingiverse
5
5.0
Apr 20, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 5
favorite 0
comment 0
Reverse engineered the trunk grocery hook for many Honda cars. You will need the following parts to mount this grocery bag hook in the trunk of your car: Bolt, Hex. (6X20) Washer, Plain (6mm) Qty 2 Washer, Spring (6mm) RIVET NUT (6MM) Nut, Flange (6mm) You can get these parts here (or at your local parts store): https://www.hondapartsnow.com/parts-list/2018-honda-clarity-plug-in-hybrid-4dr-plugin-clarity-phev-ka-cvt/cargo-hook.html The trick is mounting the RIVET NUT. Here is a YouTube video I...
Topics: thingiverse, grocery, stl, bag_holder, accessory, hook, honda_civic, car, honda_accord, Automotive,...
4
4.0
Mar 9, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: [https://www.thingiverse.com/thing:4460970](https://www.thingiverse.com/thing:4460970) ------------------ **All issues with previous Hero Me Gen4, Gen3, and Gen2 have been resolved in the latest generation.** Hero Me Gen2 for Mosquito hotend. Works with all the extras (cooling ducts, ABL mounts, etc.) from main Hero Me Gen2 thing:...
Topics: hot-end, stl, CR-10, thingiverse, Creality, Mosquito_hotend, Ender_3, Hero Me, creality_ender_3,...
8
8.0
Jan 11, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 8
favorite 0
comment 0
Update on 4/10/2017: Use the new Corner_Bracket_v2.3.stl file. From much testing and use of my iterations on this bracket, I have found that additional strengthening was needed to prevent the bolts from bending the bracket outward when tightening up against the glass plate. This version has a thicker cross bar and the corners where the bolts are placed now continue down to fully meet the crossbar. I also moved the hole for the M3 bolt to better align with the heat bed (no more carving with a...
Topics: thingiverse, Wanhao, stl, 3D Printer Parts, Duplicator i3 Plus, monoprice_makerselect,...
8
8.0
Jan 11, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 8
favorite 0
comment 0
This is a remix of cyul's spool holder: https://www.thingiverse.com/thing:1635585 I adapted cyul's spool bracket for the top of the Wanhao i3 Plus to hold the Creker 3D Printer Filament Spool Holder I purchased on Amazon: https://www.amazon.com/gp/product/B01FJ9LUO6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 See also my filament guide to go with this: http://www.thingiverse.com/thing:2240013
Topics: filament_spool_holder, thingiverse, Wanhao, stl, spool_mount, Wanhao_Duplicator_I3, 3D Printer...
3
3.0
Mar 15, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 3
favorite 0
comment 0
I needed a larger version, so I remixed Brainchecker's stackable crate to be 240mm long, 100mm tall and kept the 95mm width. I made it so that the original can stack on top of this larger version. I also added a flat surface on each end to hold a label for the crate. This larger crate has 3X the storage space of the original.
Topics: crate, Storage_Box, thingiverse, Stackable_container, storage, stackable, stackable_box, stl,...
2
2.0
Mar 15, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
This is a shelf retainer bracket for the stackable crates. I have created two versions. one is light weight and quick to print. The second version is more ridged and is a design match to the crates. Print two per crate to retain the crate(s) in position on a shelf or work surface. This works with all versions that are 95mm wide (or multiples of 95mm): https://www.thingiverse.com/thing:4734271 https://www.thingiverse.com/thing:4754362 https://www.thingiverse.com/thing:4751957...
Topics: crate, thingiverse, mounting_bracket, storage, stl, container, bracket, Containers
1
1.0
Jul 25, 2021
07/21
by
Andrew Soderberg (mediaman)
data
eye 1
favorite 0
comment 0
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-end, You can continue to use the stock ribbon cable. All that is needed is to buy a second ribbon cable breakout board and use that inside the base to convert the ribbon back into standard connectors. The breakout board is available from several sources online, but I use the Ultimate 3D Printing Store....
Topics: thingiverse, bigtreetech, Wanhao, Wanhao_I3, bigtreetech_skr, wanhao_i3_plus, stl, 3D Printer...
2
2.0
May 1, 2021
05/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
This is a AirTag holder that is print in place. No assembly required! It is designed using an AirTag model based upon Apple's dimensions of 31.9mm X 8mm and photos available since the announcement. This has been successfully printed and tested using a 0.1mm layer height. A 0.15mm layer height should also work, but I expect that a 0.2mm layer height could prevent the hinge from working. For a more refined AirTag keyring case, check out my AirTag Twist-Lock keyring case on MyMiniFactory:...
Topics: keychain, rfid, apple_airtag, air_tag, case, tag, fob, keyring, airtag_apple, stl, apple, airtag,...
1
1.0
May 1, 2021
05/21
by
Andrew Soderberg (mediaman)
data
eye 1
favorite 0
comment 0
We added a Wyze Video Doorbell recently to our front door and love it. We also have a side entrance door (home office) that did not have a doorbell that we wanted to add another Wyze Video Doorbell to, but our house is only wired for the one doorbell. Rather than buying another whole doorbell/chime/transformer system, all that the Wyze Video Doorbell needs is the transformer. So I found this build for a box that holds the 120V power socket and switch (https://www.thingiverse.com/thing:1590987)...
Topics: stl, transformer, wyzevideodoorbell, Wyze_video_doorbell, ring, video, Replacement Parts, wyzecam,...
2
2.0
Jan 16, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
##Mutant Universal X Gantry Plates ####Designed to be used with the Wham Bam Mutant Universal Tool Swapping System. ####Learn more about the Mutant here: https://whambamsystems.com/mutant ####Welcome to the Mutant Invasion! These are printable versions of the Mutant aluminum Universal X Gantry plates (these replace your 3D printer’s original X gantry carriage plate). Recommend printing in PETG or ABS. • Mutant X Gantry Roller Bearing Plate.stl • Mutant X Gantry Linear Bearing Plate.stl...
Topics: 3D Printer Parts, gantry, mutant, thingiverse, x-carriage, Wham_Bam, stl
2
2.0
Jan 16, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
##Prusa-Wanhao-Mendel X Gantry for Wham Bam Mutant ####Designed to be used with the Wham Bam Mutant Universal Tool Swapping System. ####Learn more about the Mutant here: https://whambamsystems.com/mutant ####Welcome to the Mutant Invasion! These beta designs to mount the Wham Bam Mutant onto Prusa MK3xx, Wanhao i3, and other 3D printers based on the 45mm center-to-center dual rod X gantries. Recommend printing in PETG or ABS. • Prusa Syle Mutant X Gantry Plate-beta.stl (beta version, testing...
Topics: 3D Printer Parts, mutant, thingiverse, Wham_Bam, prusa_i3, stl
2
2.0
Mar 13, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
Remixed to reinforce the neck and mount to make this filament guide stronger. I had two break on me. One while moving the printer, one when loading/unloading filament. This will require two M3 10mm or M3 12m screws as the base is thicker than the tapered screws that are replaced when mounted.
Topics: 3D Printer Parts, thingiverse, Wanhao, Cocoon_Create, Monoprice_mini, i3 mini, powerspec_i3_mini,...
2
2.0
Apr 1, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
This is a scaled up dual trash can 'Trash Walker'. Designed as a trash & recycle bin combo. Each trash can measures 220mm x 220mm x 320mm tall Print two of the following: Dual Trashcan.stl Dual Trashcan Collar.stl Print one of each of the other files. If you only want one trash can, then don't print the center leg or center spat. When complete the total size of the Dual Trash Walker is: 692mm wide x 379mm deep x 353mm tall. This of course can be scaled down if needed.
Topics: planter, robot, trash_can, Household, thingiverse, recycle, Trashbin, Trash, starwars, Trashcan,...
4
4.0
Mar 18, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
Resource files to help designers making modifications to the CR-10S Pro gantry, hot-end, or adding other options. Added additional details to the original provided by ValleyBot. With his original and my updates I was able to bring the popular Hero Me Gen2 cooling system to this printer. The parts are also available on TinkerCAD here: https://www.tinkercad.com/things/jwpwag198tg
Topics: thingiverse, hot-end, 3D Printer Parts, CR-10S Pro, stl, x gantry
83
83
Apr 24, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 83
favorite 0
comment 0
Introducing... ---------------- Hero Me Gen5 Master Suite ==================== Welcome and thank you for selecting the Hero Me Gen5 cooling system. These instructions will show you how to select your parts for your printer as well as guide you through printing the parts, assembly, and setup to be able to make great things with your 3D printer. Note that a clean formatted PDF with all the instructions and parts cross reference is included in the files for download. ### I am proud to announce the...
Topics: cooling, extruder, mosquito, th3d, e3d-titan, stl, cooling_fan, MicroSwiss, Mosquito_hotend, 5015,...
5
5.0
Mar 3, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 5
favorite 0
comment 0
Use this bucket rack to drain from one bucket into another. Often used for draining honey. The TinkerCad files are here: https://www.tinkercad.com/things/6xcHbrelcE2 Thanks to BalinTech for the 5 gallon bucket STL. I used that to tweak my design and test the parts in 3D for fit. https://www.thingiverse.com/thing:1938002 Updated Dec 20th 2018: Added left and right frame brackets for buckets with narrow rims at the top of the bucket so that the fit is tighter against the bucket. Use 'Frame Left -...
Topics: beekeeping, honey, thingiverse, Outdoor & Garden, honeycomb, bracket, stl
4
4.0
Mar 17, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: https://www.thingiverse.com/thing:4460970 ------------------ **All issues with previous Hero Me Gen4 and Gen3 have been resolved in the latest generation. Gen4 will no longer be updated (except for the firmware X/Y offset information).** This project will no longer be updated. Hero Me Gen3 bests BantaMount and others in head to head comparison ----------- Hero Me Gen3...
Topics: Hero Me, E3D, ender 5, auto_bed_leveling, Ender, E3D_Hotend, 3D Printer Accessories, Ender_3, fan,...
5
5.0
Apr 20, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 5
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: https://www.thingiverse.com/thing:4460970 ------------------ **All issues with previous Hero Me Gen4, Gen3, and Gen2 have been resolved in the latest generation.** This project will no longer be updated. Updated Mar 3rd 2019: Now version 6. Improved duct outlet to direct air flow to the tip of the nozzle. Increased space for wires. Improved mount points for OEM 4010...
Topics: thingiverse, BLTouch_levelling, fan_duct, creality_ender_3, a|s Hero, CR-10S, hero plus, fan mount,...
2
2.0
Mar 15, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
###Thor's Hammer (Mjolnir) Large Fridge Magnet Scaled up to use larger Neodymium Disc Magnets 32mm (1.26 inch). Used three magnets. Final size of Mjolnir: 96mm x 37mm x 61mm Added the design to the other side, so you can see it from either direction. Separated the disc to make printing easier with fewer supports. Magnets are available here: https://www.amazon.com/gp/product/B072C7FTGW
Topics: Kitchen & Dining, thingiverse, thor, magnet, fridge_magnet, mjolnir, stl, hammer
2
2.0
Jan 16, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
##Hero Me Mutant HotEnd Cooling System ####Designed to be used with the Wham Bam Mutant Universal Tool Swapping System. ####Learn more about the Mutant here: https://whambamsystems.com/mutant ####Welcome to the Mutant Invasion! The Hero Me Mutant is the newest member of the Hero Me family of popular HotEnd mounting and cooling systems. It is designed for performance, easy access, adaptability, and is nearly future proof. As new types and sizes of HotEnds, fans, ABL sensors, Direct drives, or...
Topics: 3D Printer Parts, mosquito, MicroSwiss, E3D_v6, hotend, E3D_Hotend, thingiverse, mutant,...
2
2.0
Jan 5, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
Remixed from Kopiemn direct drive to support a Creality OEM extruder (not the dual gear). This is configured to line up with hotends mounted in the Hero Me Gen5 cooling system.
Topics: stl, creality_cr10v2, cr10v2, extruder, 3D Printer Extruders, thingiverse
2
2.0
Apr 28, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
Moved the extruder mount point forward by 8.8mm so that the extruder will match the hot-end position for the Hero Me Gen5.
Topics: ender_5, thingiverse, direct_drive, Hero Me, 3D Printer Parts, stl, herome
5
5.0
Mar 17, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 5
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: https://www.thingiverse.com/thing:4460970 ------------------ **All issues with previous Hero Me Gen4 and Gen3 have been resolved in the latest generation. Gen4 will no longer be updated (except for the firmware X/Y offset information).** This project will no longer be updated. Update Wednesday May 6th: Updated the BLTouch wings and mount so as not to hit the case...
Topics: Ender, ender_5, Ender_3, 4010_fan, fan, Bullseye, cr10s, cooling_fan, 4020_radial, EZABL, hotend,...
4
4.0
Mar 3, 2021
03/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
I wanted to save some filament and time to print, so I hollowed out the filament holder but kept the strength to carry the weight of a full roll. Print with 3 walls and 5 top and bottom layers. TinkerCAD file: https://www.tinkercad.com/things/buzKFfJXFrN
Topics: i3 Mini, 3D Printer Parts, Cocoon_Create, Monoprice Mini, Wanhao, Filament spindle, thingiverse,...
2
2.0
Apr 1, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
A friend requested a globe bank for the coins he brings back from his trips abroad. He suggested using the great 'Textured Earth' from Bid as a starting point. https://www.thingiverse.com/bld I upscaled the globe to ~178mm and hollowed it out, then added the coin slot on top. I cut out a section of Antartica to create the coin door, and to make it fit back in, I borrowed the screw threads from Arciello. https://www.thingiverse.com/arciello I modified lard canoe's globe stand to fit the larger...
Topics: piggybank, thingiverse, sphere, Containers, coins, globe, Earth, bank, Coinbank, coin_holder,...
2
2.0
Jan 7, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
This is a dimensionally corrected model of the iPhone 12 Pro Max. The thickness of the original was too thin and the dimensions and positioning of the camera lenses were wrong. The Lightning port was off-center, and microphone/speaker holes were flipped. This model was reworked based upon digital calipered measurements from an actual 12 Pro Max iPhone.
Topics: Mobile Phone, iphone_12_pro_max, stl, thingiverse
4
4.0
Jan 17, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
This Altoid paint tray has six 2cm x 2cm x 1.4cm deep inserts for dry/solid paint blocks. Six paint brush holders 4.6mm round and a 1.1cm x 3.6cm x 1.2cm rinse/mix insert.
Topics: painting, paint, altoids_container, thingiverse, model_painting, water, Art Tools, watercolor,...
2
2.0
Jan 6, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 2
favorite 0
comment 0
I have updated the default Cakewalk mount to strengthen a couple weak points in the original. The stepper motor mount is now thicker and the mount plate is now thicker as well and the connection point where the column meets the mount plate has been widened. This is yet to be tested, but the mount points for the stepper motor, Cakewalk tube, and 3D printer match the original, so I do not expect any issues. Depending on your 3D printer's parts, you may need to get 35mm M5 bolts for this mount....
Topics: 3D Printer Parts, stl, thingiverse
3
3.0
Jan 16, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 3
favorite 0
comment 0
##Cakewalk 3D mount for the Wham Bam Mutant ####Designed to be used with the Wham Bam Mutant Universal Tool Swapping System for your 3D printer. ####Learn more about the Mutant here: https://whambamsystems.com/mutant ####Welcome to the Mutant Invasion! This is a remix mount to allow the Cakewalk 3D extruder to be mounted to a Wham Bam Mutant mobile plate to quickly swap the extruder for another (with other color/flavored icings, or back to a hot-end mount). Remixed from:...
Topics: 3D Printer Parts, Mutant, thingiverse, Wham_Bam, Cakewalk_3d, stl
4
4.0
May 1, 2021
05/21
by
Andrew Soderberg (mediaman)
data
eye 4
favorite 0
comment 0
This is an Apple AirTag model based upon Apple's dimensions of 31.9mm X 8mm and photos available since the announcement. V2 update more accurately represents the curved body of the AirTag. This can be used to create holders to place Apple's AirTags into. Print at .1mm Layer height for most accurate results. If you create a holder or container for AirTags based on this model, please reference yours as a 'remix' of this Thing. Images and measurements sourced from https://www.apple.com/airtag/ For...
Topics: stl, apple, rfid, tag, bluetooth, design, airtag, fob, concept, apple_airtag, Organization, model,...
8
8.0
Jan 11, 2021
01/21
by
Andrew Soderberg (mediaman)
data
eye 8
favorite 0
comment 0
This is a remix of two other parts: From cyul: https://www.thingiverse.com/thing:1635585 From Nerys: http://www.thingiverse.com/thing:1598317 I matched Nerys's filament guide with cyul's spool bracket to create the filament holder to work with the spool holder supports I created (also a remix) to hold the Creker 3D Printer Filament Spool Holder i purchased on Amazon: https://www.amazon.com/gp/product/B01FJ9LUO6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 See also my bracket for the spool...
Topics: thingiverse, Wanhao, stl, Wanhao_Duplicator_I3, 3D Printer Parts, Wanhao_I3, filament_guide
7
7.0
Apr 16, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 7
favorite 0
comment 0
Ryobi 900 Band Saw Mitre gauge. Never had one, so decided to make one. UPDATED 6/10/2017: Increased size of mitre base by 50%. Increased handle size by 50%. Corrected hole sizes for M3 bolts and nuts. I borrowed the angle marks from thomasdr: http://www.thingiverse.com/thing:1092306 Available to edit on Tinkercad: https://www.tinkercad.com/things/iwiS5fRdEjH-ryobi-900-mitre-gauge/
Topics: Ryobi, bandsaw, thingiverse, stl, parts, Parts, Mitre
5
5.0
Apr 20, 2021
04/21
by
Andrew Soderberg (mediaman)
data
eye 5
favorite 0
comment 0
UPDATE JUNE 15th 2020: ============ The Hero Me Generation Five has been released. For the latest information please visit here: https://www.thingiverse.com/thing:4460970 ------------------ **All issues with previous Hero Me Gen4 and Gen3 have been resolved in the latest generation.** This project will no longer be updated. While I believe all the parts are correct, they are subject to change. I will mark them as final once testing is completed. The Hero Me Gen4 is all M3 screws 7 retainer nuts...
Topics: cooling_duct, thingiverse, cooling_fan, CR-10S, 40mm_fan, E3D_Hotend, cooling, CR-10, 4020_radial,...
