1
1.0
-
-
-
by
Chance Henderson (Anaphalaxas)
data
eye 1
favorite 0
comment 0
I wanted to make a Kinesis Freestyle 2, but better. Between the Keeb.io Sinc, the FR4 plate kit, and this 3D print, I've accomplished that. The pieces tent the keyboard at 15 degrees. The print just barely fits on my Ender 3 Pro (you've gotta play with it in Cura a bit to get it juuuuust right). Print it with the palmrests facing down. As pictured, it was printed in a wood-filled PLA, then stained with some gel stain, intentionally leaving heavy streaks to simulate woodgrain. The big chunks...
Topics: stl, Computer, keyboard, thingiverse, keebio, case
3
3.0
-
-
-
by
Chance Henderson (Anaphalaxas)
data
eye 3
favorite 0
comment 0
Clamp to mount a short (or long, I suppose) section of PTFE tube to a 2020 extrusion. I use it to feed the direct drive on my Ender 3. It allows you to keep the spool somewhere other than on top of the frame, to reduce vibrations, and still feed plastic from the top down. You'll need 4 M3 heat-set inserts, 4 M3x12 ( i think, somewhere close should be good enough), 2 M5x8mm bolts, and 2 M5 T-nuts. The clamp is designed to work with Capricorn XS tubing (3.95 +- 0.05mm OD) but should work with...
Topics: PTFE_tube, PTFE, stl, clamp, 2020, 2020_extrusion, thingiverse, 3D Printer Accessories
2
2.0
-
-
-
by
Chance Henderson (Anaphalaxas)
data
eye 2
favorite 0
comment 0
This is a mashup of the controller mounts used with this https://www.thingiverse.com/thing:4257873 Valve Index stock with this https://www.thingiverse.com/thing:2057419 stock. It uses the controller clamp method from the Index stock, and the footprint/magnet locations of the Oculus stock. You'll need the parts "index_stock-PinF", "index_stock-PinR", "index_stock-FrontAttach" and "index_stock-RearAttach" from the Index stock, and parts "VRR3a2",...
Topics: thingiverse, mount, controller, stl, magnetic, Valve_Index, Video Games, stock
2
2.0
-
-
-
by
Chance Henderson (Anaphalaxas)
data
eye 2
favorite 0
comment 0
This is a conglomeration of the SpeedDrive direct drive mount, the 3DFused linear rail mount, and the Hero Me Gen5 system (has the original Ender 3 mount points). It requires a pancake stepper (the StepperOnline one is what I used), as well as a BMG or clone. I use it with the Mosquito HMG5 base and the 3DFused linear rail kit, but I imagine it would work with any MGN12 rail since it screws into the carriage itself. With this layout, you don't lose any X space, and with the Y endstop positioned...
Topics: Hero_Me_gen_5, bondtech_bmg, stl, 3D Printer Parts, Ender_3, linear_rail, thingiverse, direct_drive
