This case is designed specifically for the LM2596s buck converter (Amazon link below). I wanted to step down the current of my Ender 3 Pro’s power supply to 12v to run a Noctua fan. I was modifying the PSU with a cover I found here on Thingiverse: Ender 3 Pro PSU Noctua 60mm 25mm https://www.thingiverse.com/thing:3484372 To mount the buck converter to the PSU cover, I designed this case. I recommend printing this case face down using supports. The supports will assure that the corners with...
Topics: stl, 3D Printer Accessories, thingiverse
This is kit is designed to allow a standard 2S shorty lipo hard case battery pack to be mounted in the WLToys 104001 4wd buggy. If you want to race your 104001, a hard case battery is a requirement of most racing organizations such as ROAR. When slicing the "BatteryBracesL&R" file, you will want to use custom supports since one side/leg is taller than the other to allow for the height of the plastic side pan. I also strongly recommend printing all the parts with a raft of at least...
Topics: stl, 4wd, thingiverse, WL_Toys_104001, rc_buggy, RC_Car, WLToys_104001, R/C Vehicles, 104001, RC4WD
This is designed to restore the factory kick/castor to the WLToys 104001 4wd buggy if you are upgrading to either the 5mm thick or 2mm thick carbon fiber chassis kit. The stock aluminum pan has 5 degrees of “kick” which combined with the castor built into the front steering blocks. Swapping the aluminum pan for the available carbon chassis’ results in a loss of total castor. This wedge corrects that and adds a small bumper to protect the front of the carbon chassis from impacts that could...
Topics: stl, thingiverse, WL_Toys_104001, rc_buggy, RC_Car, WLToys_104001, R/C Vehicles, 104001