9
9.0
Jan 17, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 9
favorite 0
comment 0
This is a customizable scotch yoke. You can learn some more about how this model was made and a little about the physics behind the resulting motion of this mechanism here: http://artofrandomness.net/blogs/matts-blog/scotch-yoke-mechanism/ Parameters should be straightforward to get what you want out of the file.
Topics: Mechanical Toys, mechanism, thingiverse, Scotch_Yoke, reciprocating_saw, Reciprocating, stl
11
11
Apr 30, 2021
04/21
by
Matt Rosenthal (Rosynthal)
data
eye 11
favorite 0
comment 0
Hey all! This is an enclosure for my Daft Punk Desk Toy project. More details can be found at my blog here: http://artofrandomness.net/matts-blog/daft-punk-desk-toy/ It would be better to make the enclosure out of say a laser cut or router acrylic or plywood but I thought this would be pretty cool and its fun to play! Special thanks to andyways for their amazing Daft Punk Helmets! You can find those below: http://www.thingiverse.com/thing:95504 http://www.thingiverse.com/thing:94603
Topics: stl, Daft_Punk_Helmet, Music, fusion_360, 555, Daft_Punk, fusion360, synthesizer, thingiverse
10
10.0
Apr 30, 2021
04/21
by
Matt Rosenthal (Rosynthal)
data
eye 10
favorite 0
comment 0
Here is my OpenSCAD Geneva Mechanism. Its a basic intermittent motion mechanism. There are a few other versions that other people have made but as far as I had found none have been customizable. The parameters should be pretty simple to understand. Enjoy! You can see my post about this on my website here: http://artofrandomness.net/projects/geneva-mechanism/ .
Topics: stl, geneva_wheel, geneva_mechanism, mechanism, Geneva_Drive, openscad, parametric, thingiverse,...
24
24
Jan 19, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 24
favorite 0
comment 0
This is the ratchet model from 507 Mechanical Movements: http://507movements.com/mm_075.html You will need a 3/8" dowel and 2x 1" #6 sheet metal screws. It is best to assemble everything on the dowel, pilot drill through handle and moving pawls hole, screw screws in, and cut the dowel ends flush. Some filing will be necessary to get the stop pawl to fit. See my blog post about this here: http://artofrandomness.net/blogs/matts-blog/ratchet-model-maychanisms-1/...
Topics: Mechanical Toys, Mechansim, thingiverse, ratchet, stl, 507_movements
8
8.0
Apr 18, 2021
04/21
by
Matt Rosenthal (Rosynthal)
data
eye 8
favorite 0
comment 0
This is the Mechanical Shears model from 507 Mechanical Movements: http://507movements.com/mm_130.html You will need a 5/16" dowel, 4x 5/8" #6 screws, 2x 1/4" #6 screws, and a rubber band. The crank, nut, and cams all have a flat on one side so shave or sand off a bit of that dowel. Try to make it fit as snug as possible. It is best to assemble everything on the dowel, pilot drill through handle, nut, and base, screw screws in, and cut the dowel ends flush. See my blog post about...
Topics: Mechanical Toys, shears, mechanism, thingiverse, stl, 507_movements
10
10.0
Jan 18, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 10
favorite 0
comment 0
Battery feet for my battery rack project found here: http://artofrandomness.net/blogs/matts-blog/matts-shop/power-tool-battery-holder/ The models labeled skeleton should be printed with supports. The models labeled solid are the same geometry without the holes on the angle portion. These were designed in inches so scale up 25.4 on your slicer.
Topics: 20v, porter_cable, Tool Holders & Boxes, thingiverse, Dewalt_20v_battery, dewalt, battery, stl
10
10.0
Jan 19, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 10
favorite 0
comment 0
This is the level winding mechanism model from 507 Mechanical Movements: http://507movements.com/mm_108.html You will need a 5/16" dowel, a 3/8" dowel, and 6x short #8 machine screws. It is best to assemble everything on the dowel, pilot drill through handle and base, screw screws in, and cut the dowel ends flush. See my blog post about this here: http://artofrandomness.net/blogs/matts-blog/level-winding-mechanism-maychanisms-2/ https://youtu.be/ZjTXvZKW1RA
Topics: Level_Winding, Mechanical Toys, mechanism, thingiverse, stl, 507_movements
8
8.0
Jan 17, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 8
favorite 0
comment 0
*EDITED 12/18/17* I noticed the discs came out the wrong sizes when printing. All is fixed now This is a simple puzzle. You move one disk at a time from one peg to another and you cannot put a larger disk on a smaller. You can customize your puzzle with the size and number of disks. If you would like to read my post about this see the following URL: http://artofrandomness.net/blogs/matts-blog/the-tower-of-hanoi-puzzle/
Topics: towers_of_hanoi, thingiverse, puzzle, Puzzles, stl
8
8.0
Apr 18, 2021
04/21
by
Matt Rosenthal (Rosynthal)
data
eye 8
favorite 0
comment 0
This is the Chinese Windlass model from 507 Mechanical Movements: http://507movements.com/mm_129.html and http://507movements.com/mm_352.html You will need a 3/8" dowel, 2x 1/2" #6 sheet metal screws and 1 3/4" #8 machine screw and nut. It is best to assemble everything on the dowel, pilot drill through handle and spool, screw screws in, and cut the dowel ends flush. See my blog post about this here: http://artofrandomness.net/blogs/matts-blog/chinese-windlass-maychanisms-3/ ...
Topics: Mechanical Toys, mechanism, thingiverse, Chinese_Windlass, stl, 507_movements
