4
4.0
May 1, 2021
05/21
by
(M4XXX)
data
eye 4
favorite 0
comment 0
Conversion kit to fit a 80W CO2 Laser Tube (with 80mm diameter and 126cm length) inside of the LaserEnd (originally there only fitts a CO2 50W Laser tube < 1m). See Pictures. I assume no liability. The LaserEnd itself was designed by Sebastian End.
Topics: stl, thingiverse, DIY
4
4.0
May 1, 2021
05/21
by
(morrowsend)
data
eye 4
favorite 0
comment 0
I made the bolt holes slightly larger to accommodate the button-headM5 bolts I had, and I also added a bar to help hold down the excess belt material. I printed it using 1.75mm PLA on a Taz 6.
Topics: stl, thingiverse, Machine Tools
4
4.0
May 1, 2021
05/21
by
M B (cosmowave)
data
eye 4
favorite 0
comment 0
Pot for wall mount
Topics: stl, Outdoor & Garden, garden, pot, thingiverse
4
4.0
May 1, 2021
05/21
by
M. Clark (DrRadium)
data
eye 4
favorite 0
comment 0
This is the base for an Ork war boss on a war bike. It is normally 100mm long and 40 mm wide, 5m thick. I have included both a solid version and one the i hollowed out with 2mm walls. It is thicker than a more usual 1mm because of the size of the base and the weight it is intended to support.
Topics: stl, thingiverse, Games
5
5.0
May 1, 2021
05/21
by
MAIM (Maimface)
data
eye 5
favorite 0
comment 0
(it's fine to sell fursuits made WITH this, but you may not sell the base itself) this is the last free head in this style for a while. -includes an IMPROVED jaw (the "NEW" version) -includes an alternate, chopped up version to fit smaller printers -over time I will go through and make some upgrades/updates to the other heads, as well. -the "talk jaw" should probably not be made with rubber bands, I'm just doing this to keep my prints together until I start assembling the...
Topics: stl, fursuit_eyes, Horns, cow, Costume, fursuit_teeth, fursuit, bull, fursuit_head, thingiverse
4
4.0
May 1, 2021
05/21
by
MARK SESTAK (OmniaLLC)
data
eye 4
favorite 0
comment 0
Store and display all of your baseball or softball bats on the wall.
Topics: stl, thingiverse, Sport & Outdoors
4
4.0
May 1, 2021
05/21
by
MaNwE Melody I.M (MaNwE)
data
eye 4
favorite 0
comment 0
Helps to transport used machine. So water can not drain by hose while transport No clue what is the proper name of this item
Topics: stl, bathroom_accessories, washing_machine, hose_cork, Bathroom, hose_adapter, dishwasher,...
4
4.0
May 1, 2021
05/21
by
Mac Scott (Macscott56)
data
eye 4
favorite 0
comment 0
This is a recreation of the 12" Yakattack Geartrac.
Topics: stl, geartrac, fishing, Sport & Outdoors, kayak, yakattack, thingiverse
5
5.0
May 1, 2021
05/21
by
Mackenzie Hamann (mghaman)
data
eye 5
favorite 0
comment 0
Topics: stl, thingiverse, 3D Printing
4
4.0
May 1, 2021
05/21
by
Maik Siedschlag (maik1896)
data
eye 4
favorite 0
comment 0
This adapter connects your Bosch Professional GEX 125-150 eccentric sander with your Bosch vacuum. The adapter supports on the vacuum side the Bosch Click & Clean system which is the same as the Kaercher C35. On the machine side it has a diameter of 28mm to fit on the vacuum connector of the sander. Should fit other connectors with 28mm as well but it has this two oval ends to close the additional holes of the bosch sander.
Topics: stl, vacuum, Bosch_GEX, Bosch_Professional, Parts, click_and_clean, Kaercher, irangex,...
4
4.0
May 1, 2021
05/21
by
Makarova Anna (AnnaM2511)
data
eye 4
favorite 0
comment 0
null
Topics: stl, thingiverse, 3D Printing
4
4.0
May 1, 2021
05/21
by
Maksim Tretyakow (MaksimTretyakow)
data
eye 4
favorite 0
comment 0
Topics: stl, thingiverse, 3D Printing
9
9.0
May 1, 2021
05/21
by
Maksim Verbovoy (MaksimV13)
data
eye 9
favorite 0
comment 0
I am not the author of these models, I just upgraded them, making them symmetrical keychains on both sides. The authors of the original models, as well as links to them, are presented below in the description: Soviet logo by Impregnation: https://www.cgtrader.com/free-3d-print-models/gadgets/keychains/redalert-soviet-icon Allied logo by 3dpoplauki: https://www.thingiverse.com/thing:1600706 Yuri logo by Ivanboev: https://www.deviantart.com/ivanboev
Topics: stl, keychain, yuri, allies, soviet, Keychains, Red_Alert, thingiverse, logo, command_and_conquer,...
6
6.0
May 1, 2021
05/21
by
Mal Brick (Popskee)
data
eye 6
favorite 0
comment 0
This is an organiser I put together for my Zombicide 2.0 Kickstarter. It holds all of the tokens and cards etc for the base game plus stretch goals, the Washington ZC and Fort Hendrix expansions and the two cars. I also made a bit more space to hold 30 dice. Where you need to print multiple copies I've included that in the file name. The only file that needs supports is Dials. The rest print fine without. This is my first go at making an organiser so I'm learning as I go. I used Microsoft 3D...
Topics: stl, Toy & Game Accessories, Zombicide, Zombicide_holder, thingiverse
4
4.0
May 1, 2021
05/21
by
Mar Hun (MarHun16)
data
eye 4
favorite 0
comment 0
This is an Anker usb charger holder to use for under desk fix.
Topics: stl, Anker, charger, Accessories, usb, thingiverse, usb_charger
5
5.0
May 1, 2021
05/21
by
Marc Oldenburg (moldenb)
data
eye 5
favorite 0
comment 0
I designed this chess board to have also a box (or better 2 boxes) for the figures. I got some inspiration from Kalcipher's board (https://www.thingiverse.com/thing:4782440), especially for the tiles. To connect the "connectors" with the board, as well as aligning the cornerson the board, I used just some filament. I printed everything using PETG, but PLA should works just fine as well. Everything was printed without rafts or supports and with 25% infill, but I guess 15 should be also...
Topics: stl, Dame_Spiel, Draughts, checkers, Chess_Board, dame, chess, Chess, Schach, Draughts_Board,...
5
5.0
May 1, 2021
05/21
by
Marcelo J. (nighthawk326)
data
eye 5
favorite 0
comment 0
This is a Root 3 CNC mount for a 2.2kw, 80mm spindle. Print it with supports for the acme nut only with at least 50% infill and 4 perimeters an 4 top and bottom layers.
Topics: stl, thingiverse, Parts
5
5.0
May 1, 2021
05/21
by
Marcin Barabasz (mbarabasz)
data
eye 5
favorite 0
comment 0
A common problem with Tuya thermostat is that it does not hold well and can sometimes slip from it's original place. This simple design prevents this from happening. The new versions include this ring already. Enjoy
Topics: stl, thingiverse, Replacement Parts
5
5.0
May 1, 2021
05/21
by
Marcus Schumacher (marcus72)
data
eye 5
favorite 0
comment 0
box for XR4R Reciver
Topics: stl, thingiverse, R/C Vehicles
4
4.0
May 1, 2021
05/21
by
Maria Gomez (Gmez08)
data
eye 4
favorite 0
comment 0
For all the Mainers out there! Got the state from TinkerCAD and made the "Home" text in illustrator (font is Raustila). Printed in dark blue Inland PLA and silk gold PLA. My post processing script failed when it came to the filament change, so I did it manually. There are two sizes - the one displayed in photos is the large file.
Topics: stl, home, Decor, maine, thingiverse, maine_outline
4
4.0
May 1, 2021
05/21
by
Marian Löffler (mare02)
data
eye 4
favorite 0
comment 0
needed: - Nema 14 5mm shaft - max.: 12x M3 Nut (min 4) - 4x M3 12mm - 2x M3 8mm this is a "better" version of the 6Base and 6Coupling of labala https://www.thingiverse.com/thing:2146252 ("better") because i dont even know how to use his. So I think this is a "better" (easier) version.
Topics: stl, robotics, Arduino_Mega, BCN3D MOVEO, Robotics, arduino, thingiverse
4
4.0
May 1, 2021
05/21
by
Mario Lopez (OneEyed_King)
data
eye 4
favorite 0
comment 0
Topics: stl, 3D Printing, Insta360, Protek25, Camera, Mount, Protek, Insta360 go, thingiverse, Drone
4
4.0
May 1, 2021
05/21
by
Mario Medina (MarMed)
data
eye 4
favorite 0
comment 0
Simple battery tab to disconnect the chromecast remote batteries when packed for travel, when not in use the tab easily fits in the battery compartment for storage.
Topics: stl, battery, remote, chomecast, insulating, thingiverse, Gadgets
4
4.0
May 1, 2021
05/21
by
Marko Baliko (TFMarko)
data
eye 4
favorite 0
comment 0
Um einen zusätzlichen halt bei den TUSH Spulenhaltern zu bekommen, habe ich einen weiteren Rahmen erstellt. Für verschiedene größen von Spulen habe ich verschiedene Rahmen mit dem jeweiligen Hersteller und Gewicht erstellt. ------------ To get an additional support for the TUSH spool holders, I created another frame. For different sizes of spools I have created different frames with the respective manufacturer and weight of the spool.
Topics: stl, thingiverse, 3D Printer Accessories
4
4.0
May 1, 2021
05/21
by
Marko Samirić (msax8)
data
eye 4
favorite 0
comment 0
hotend disassembled and measured with calipers. This is a version with the M8 attached E3D adapter/bowden coupler. Modelled in Freecad v0.19.
Topics: stl, Creality, hotend, allmetal, 3D Printer Parts, mockup, thingiverse, bimetal
4
4.0
May 1, 2021
05/21
by
Martin Cadek (Zrac)
data
eye 4
favorite 0
comment 0
Basic key tag / keychain tag, I use stickers which go into it and that I then write on. Quick easy print, nothing fancy but it is functional.
Topics: stl, tag, Organization, thingiverse, key, keychains
4
4.0
May 1, 2021
05/21
by
Martin Polanski (Markovski)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, Heart, sign, I love you, thingiverse, Sculptures
4
4.0
May 1, 2021
05/21
by
Martin Rak (Mrak3D)
data
eye 4
favorite 0
comment 0
I needed some holder for washed shoes to partialy dry in the shower. This is my first try :) I think it works fine. Printed from PETG, 15% infill, MK3S+
Topics: stl, Dryer, Bathroom, shoe, thingiverse, bathroom
4
4.0
May 1, 2021
05/21
by
Martin Taichl (taichl)
data
eye 4
favorite 0
comment 0
This is my project Destiny where i designed the Destiny from the SGU with attachable Seedship and a stand. The model is a kit and fits together without any glue whatsoever. For easier assembly, please take a look at the video series about the project: https://www.youtube.com/watch?v=bJCTO6jc__s&list=PLyHwaiEHdyZrLYG_-qljIfkuzycL5RODo
Topics: stl, Vehicles, Spaceship, Destiny, Stargate, Ancient, thingiverse, SGU
4
4.0
May 1, 2021
05/21
by
Marvin Motz (JohoJoho)
data
eye 4
favorite 0
comment 0
I created a Box for the juice in a bag kinda things, since the carton boxes that come with it do not hold up for very long. Note: The Box is a little over sized for 3 L bags, should also be able to hold a 5 L one, did not try it yet though. Also the wholes are not super symmetrical. I might do another version, a little smaller so it fits in more places and will tidy up the look when I got the time. I used support for the slot in the middle, should also work without it I think. I used PETG, PLA...
Topics: stl, Food & Drink, Bag-in-a-Box, box, thingiverse, juice
12
12
May 1, 2021
05/21
by
Mas Antis (masyaantispam)
data
eye 12
favorite 0
comment 0
Some Atari Portfolio parts which are often get lost: - Battery cover - Expansion port cover - Small (originally rubber) leg - Small plastic details near display hinge I used black ABS plastic an a lot of sanding.
Topics: stl, Computer, atari, atari_portfolio, thingiverse
4
4.0
May 1, 2021
05/21
by
Mason Cornwall (BartWord)
data
eye 4
favorite 0
comment 0
A sheesh phone case for an iPhone XR
Topics: stl, sick, iPhone XR, phone case, thingiverse, sheesh, 3D Printing
5
5.0
May 1, 2021
05/21
by
Massimiliano dotti (mister_max)
data
eye 5
favorite 0
comment 0
I often find some of my irrigation Sprinkler caps (nozzle) broken (sometimes it's the winter, sometimes it's me with the string trimmer) Pop-up sprinklers don't cost much but I wanted to avoid changing the entire piece when it's just the cap of the nozzle broken. ***** Updated Version V2-V3 The cap works fine, but after a couple of uses the cap came out from the screw. I added a couple of versions with higher solid for the screw and higher halfcircle for water diffusion
Topics: stl, Outdoor & Garden, lawn_sprinkler, irrigation_sprinkler, sprinkler, cap, thingiverse
4
4.0
May 1, 2021
05/21
by
Mathaus Baptista (Baptista25)
data
eye 4
favorite 0
comment 0
This is a 3d model of the BIQUI B1 metal sheet/plate to be configured on the prusa slicer software to help with a visual reference while slicing your prints. It will give your slicing process a nicer look, but will make no difference on the software performance. To set this go to "Printer Settings" tab, in the "General" menu find the "Size and coordinates" area, find the "Bed shape" item and click on the "Set" button. A small window will pop,...
Topics: stl, prusa, prusa_slicer, 3D Printer Parts, PrusaSlicer, thingiverse, Biqu_B1
4
4.0
May 1, 2021
05/21
by
Mathew Varghese (Lumorbis)
data
eye 4
favorite 0
comment 0
I've added two minute flaps for the item to not fold backwards
Topics: stl, tablet, air2, ipad pro, s6s7+, Mobile Phone, ipad air, pro, mobile, s6 lite, ipad air 2,...
4
4.0
Jun 10, 2021
06/21
by
Mathias Westerlund (Seneram)
data
eye 4
favorite 0
comment 0
Stackable tray for DIMM sticks, low material use for printing quickly and conserving material when bulk printing. Can be stacked high without issues, we have stacks of 10 at our datacenter fully filled with heatsinked HP memories. Has a cutout in the low frame to allow easy reading of dimm stickers so that labeling is "Automatic" as long as all sticks are the same in the same tray.
Topics: tray, DIMM, Computer, thingiverse, memory, stackable, DDR, stl
4
4.0
May 1, 2021
05/21
by
Matteo Cadoni (MethX)
data
eye 4
favorite 0
comment 0
HUAWEI HONOR WATCH - CHARGE BASE STAND HOLDER Fit with all HUAWEI and HONOR charging bases with a circumference of 39/41 mm.
Topics: stl, honor watch, smartwacht, holder, stand, base, watch holder, thingiverse, Huawei, Tool Holders...
4
4.0
May 1, 2021
05/21
by
Matteo Guerra (MG95Tux)
data
eye 4
favorite 0
comment 0
Sometimes you get in a emergency for a drink, so why not making a box with a glass to break in case of emergecy of the cheapest-but-decent Amaro available in Italy? Printable with PLA or PETG, suggesting red for obvious reasons
Topics: stl, Liquor_bottle, madewithfusion360, liquor, Italy, lidl, gift, made_in_italy, camaro, Household...
4
4.0
May 1, 2021
05/21
by
Matthew Antone (jumpinjammer)
data
eye 4
favorite 0
comment 0
These turrets are designed to convert your X-wing TMG Tantive IV to a Pheonix Squadron CR90. These ships were outfitted for war and had larger weapons than were used on the Tantive IV.
Topics: stl, Toy & Game Accessories, thingiverse
8
8.0
May 1, 2021
05/21
by
Matthew Meganck (GankManFPV)
data
eye 8
favorite 0
comment 0
These are the 3D prints for the Gank MultiRotors Skylla 3" Hexacopter. These are free for you to print for yourself or friends. Commercial use is NOT Authorized.
Topics: stl, Skylla Hex, Gank_Multirotors, hexcopter, skylla, Gankmanfpv, thingiverse, R/C Vehicles
4
4.0
May 1, 2021
05/21
by
Matthew Starrman (MattInDetroit)
data
eye 4
favorite 0
comment 0
R2D2 was just begging for this remix. Look at him, he looks like a can! Video demonstration: https://youtu.be/9Il7Kk3hA08 Use his leg as a handle. (On an earlier draft I actually moved the leg further out to act as a better handle, but it looked stupid). I raised his feet up higher than they should be (to cover the cylinder hole in a earlier draft). I kept his him at 12oz (for now) to keep the aspect/scale consistent. 16oz is possible, but requires a little bit of stretching and some changes to...
Topics: stl, R2D2, tankard, can, stein, Other, thingiverse, goblet
4
4.0
May 1, 2021
05/21
by
Matthias Clauß (jesterhead_82)
data
eye 4
favorite 0
comment 0
Remixed to Fit a 12864B Display from MKS to a Prusa Mini
Topics: stl, thingiverse, 3D Printing
4
4.0
May 1, 2021
05/21
by
Matthias Lange (matze81)
data
eye 4
favorite 0
comment 0
Everytime i want to level the heatbed of my Ender 3 i forgot in which direction i had to turn the wheels. Former i ahd a simple post it attached to the printer so i though a printed version would lock better. Sorry, coin Text is in German.
Topics: stl, thingiverse, 3D Printer Accessories
4
4.0
May 1, 2021
05/21
by
Mauro Spigariol (Spiga76)
data
eye 4
favorite 0
comment 0
Antivibration for 20x40 profile with TPU insert.
Topics: stl, thingiverse, 3D Printing
5
5.0
May 1, 2021
05/21
by
Max --- (Kolibri123)
data
eye 5
favorite 0
comment 0
Wrench to setup your rear suspension of the GSX-R 600. Works fine with the GSX-R 600 L1. May work with other versions also.
Topics: stl, thingiverse, Automotive
4
4.0
May 1, 2021
05/21
by
Max Meyer (Mehlstaub)
data
eye 4
favorite 0
comment 0
Small carriage for some button. Has a clearance for a button base of 40 x 40 x 5 mm. It also support the button to have a cable outlet. I created this to have the "Switch" button from this KVM box https://www.amazon.de/gp/product/B08RHSKKXJ/ to be glued to the back of my office desk.
Topics: stl, home, vertical, kvm, office, switch, Computer, mount, thingiverse
9
9.0
May 1, 2021
05/21
by
Maxim Markin (Skarpzon)
data
eye 9
favorite 0
comment 0
A true Scale Space Martan, a fun new project I continued working on by mixing sci-fi with a bit of ancient history for tabletop gamers. You can check out the first figure for this collection I've created by visiting my profile. Be sure to follow me here and on Instagram @runesforge as I will be making multiple variations of these figures. Will be uploading a full squad in the upcoming days! Feel free to check out my brothers' work: @artiiicus Like what we do? Consider supporting us over at...
Topics: warhammer, dark angel, 3d minis, stl minis, astartes, blood angel, greek, roman, space marine,...
4
4.0
May 1, 2021
05/21
by
Maximilian Montserrat (maxim7745)
data
eye 4
favorite 0
comment 0
This design is a button guard for the Litter-Robot 3. It is very easy to accidentally press the "empty all litter" button rather than manually cycling the machine so this covers it, making it impossible to press with a finger. Instead, you press the button underneath through the small hole in the guard with a pencil or similar stylus. It should fit loosely enough that it doesn't bind to the button but tightly enough to stay put. A STEP version is included to allow for easy...
Topics: stl, litterrobot, cats, litterbox, litter, catlitter, thingiverse, Pets
4
4.0
May 1, 2021
05/21
by
Melker Kranshed (melkr)
data
eye 4
favorite 0
comment 0
Topics: stl, thingiverse, Vehicles
4
4.0
May 1, 2021
05/21
by
Merlin Dienst (DoktorMerlin)
data
eye 4
favorite 0
comment 0
My burger press came without a pressing stamp, so I created and 3D printed one. I printed it in Prusament Jet Black PETG and sanded it down to remove any layer lines, so that it is completely food safe.
Topics: stl, hamburger_press, hamburger, Kitchen & Dining, thingiverse