4
4.0
May 1, 2021
05/21
by
(Angel3D)
data
eye 4
favorite 0
comment 0
Laser lens protection with air support for G2 lens on a Ortur Lasermaster 2. Based on the air support variants for the standard or G7/G8 lens for the Ortur Lasermaster 2, I designed this part to be used as snap-in and easy replacable lens protection. The creations of TheKre8Group or Devilkit are similar, the idea of the snap-in has been taken from there, but this is not a remix of those versions, since I created it specially for the G2 lens support. "Ortur Laser Master II - Air...
Topics: stl, DIY, lens, cap, air_support, thingiverse, laser, lasercut, ortur
4
4.0
May 1, 2021
05/21
by
(Chrashice)
data
eye 4
favorite 0
comment 0
This is a stylish soap holder for the bathroom. At the back plane are two holes for suction cups. Therefore it can be placed flexible on every smooth wall. In addition it has an hook to hang things, for example a bag with dry shampoo like in the picture. There is also a variation without a hook.
Topics: stl, soap_holder, design, dry_shampoo, Bathroom, hook, thingiverse, bathroom_hook, bathroom
4
4.0
May 1, 2021
05/21
by
(Egghebrecht)
data
eye 4
favorite 0
comment 0
This is a sleeve and breech for using a 17/32 standard brass barrel instead of an aluminium barrel in most 3d printed blasters without all the hassle of using brass. This also allows you to swap brass or normal barrels on the go and without needing any other change. The brass clicks into place in the breech and allows for smooth loading of the darts without any interference from ridges such as from the brass. There are 2 versions of breeches I designed so far The first breech is intended for...
Topics: stl, caliburn, Toy & Game Accessories, nerf, Nerf_Blaster, blaster, thingiverse
4
4.0
May 1, 2021
05/21
by
(K_thod_v2)
data
eye 4
favorite 0
comment 0
Needed some custom parts to hold a R9 antenna and a vifly finder
Topics: stl, thingiverse, bando_killer, R/C Vehicles
4
4.0
May 1, 2021
05/21
by
(Keeto2k)
data
eye 4
favorite 0
comment 0
Treble clef keychain
Topics: stl, keychain, treble_clef_keychain, Keychains, gift, music, thingiverse, treble_clef
6
6.0
May 1, 2021
05/21
by
(Keeto2k)
data
eye 6
favorite 0
comment 0
Cell phone stand
Topics: stl, Mobile Phone, cell_phone_stand, cell_phone, cellphone_stand, thingiverse
4
4.0
Jun 10, 2021
06/21
by
(Lak1v)
data
eye 4
favorite 0
comment 0
Explanation It's a base for your desired mount so feel free to add anything that can hold your smartphone in an appropriated way. e.g.: I taped a strong magnet to the clamp and inserted a metal plate between my smartphone and the cover. Even on rough streets the clamp and my smartphone doesn't move a bit. Originally designed for the Golf 7 with a thight fit . The Air-Vent behind the clamp can still be moved. How-To-Insert First you align the top piece (not the round side) and "clip"...
Topics: clamp, Ventilation, clamps, smartphone, Ventilation_Grill, automobile, Dashboard, car, volkswagen,...
4
4.0
May 1, 2021
05/21
by
(Liam158)
data
eye 4
favorite 0
comment 0
Frame/hanger with customizable length for posters. It is split into two pieces and joined by a dovetail. The poster slides into a groove and is lightly clamped by a small 3mm bolt. Added a nut insert and remade the nylon thread insert (easier to print and better to mount the poster on the wall). Add a few millimeters extra to your poster length (5mm is a good value). Print with higher infill for added weight if your poster is curling. Supports are needed for the dovetail.
Topics: stl, Poster_mount, poster_holder, Household, Decoration, clip, poster, thingiverse, Wall_Hanger,...
4
4.0
May 1, 2021
05/21
by
(M4XXX)
data
eye 4
favorite 0
comment 0
Conversion kit to fit a 80W CO2 Laser Tube (with 80mm diameter and 126cm length) inside of the LaserEnd (originally there only fitts a CO2 50W Laser tube < 1m). See Pictures. I assume no liability. The LaserEnd itself was designed by Sebastian End.
Topics: stl, thingiverse, DIY
4
4.0
May 1, 2021
05/21
by
(Onkel_Jim)
data
eye 4
favorite 0
comment 0
Eine "Ersatznase" für den Flügelabwurf des Tie Fighter, der immer gerne mal abbricht. Muss leider verklebt werden und ggf noch etwas abgeschliffen. Tut aber was es soll.
Topics: stl, Mechanical Toys, TIE_fighter, Kenner, starwars, thingiverse
6
6.0
May 1, 2021
05/21
by
(SocraticSculpture)
data
eye 6
favorite 0
comment 0
Couldn't find beefy legs. Here are some beefy legs.
Topics: stl, Body_Parts, muscular, strong, Models, thingiverse, beefy, legs
4
4.0
May 1, 2021
05/21
by
(animalthekid)
data
eye 4
favorite 0
comment 0
This is a f-f watch band connecter for metal watches.The size is 14mm
Topics: stl, thingiverse, Accessories
5
5.0
Jun 10, 2021
06/21
by
(captaINstraiTJacket)
data
eye 5
favorite 0
comment 0
Simple and easy to print case for USBASP.
Topics: programmer, Electronics, arduino, stl, thingiverse, avr
4
4.0
May 1, 2021
05/21
by
(charlescho)
data
eye 4
favorite 0
comment 0
The spacing between the snapping tabs were increased by .7mm. Now it fits perfectly. I also fixed the orientation so the front faces down on the print bed.
Topics: stl, thingiverse, Parts
7
7.0
May 1, 2021
05/21
by
(chdd)
data
eye 7
favorite 0
comment 0
Made with Tinkercad: [Edit it here.](https://www.tinkercad.com/things/lr9xNb3rlNb-sd-char-zaku-ii-moving-mono-eye-gundam-gunpla-3d-print)
Topics: stl, sd_gunpla, Zeon, sd_gundam, 3D_printing, Zaku, gundam, ZAKU_II, char, gunpla, Model Robots,...
6
6.0
May 1, 2021
05/21
by
(chdd)
data
eye 6
favorite 0
comment 0
Made with Tinkercad: [Edit it here.](https://www.tinkercad.com/things/g6KetcvBzj7-sd-zaku-ii-moving-mono-eye-gundam-gunpla-3d-print)
Topics: stl, sd_gund, Zeon, SD_gunpla, Zaku, gundam, ZAKU_II, Model Robots, gunpla, thingiverse
5
5.0
May 1, 2021
05/21
by
(dotplot)
data
eye 5
favorite 0
comment 0
I wanted some futuristic cultists for playing [Grim Horizons](https://www.wargamevault.com/product/336867/Grim-Horizons--Adventures-Told-Through-Combat) so i made this remix from some available models. The figures are approximately 30mm tall without any base so should get scaled if they are not being used as medium characters. Unfortunately the Thingiverse remix source files system is broken at the moment so the remix files are just linked here, I will update this when the systems starts...
Topics: cult, cthulhu, dnd, Starfinder, scifi, Grim_Horizons, 28mm, Call_of_Cthulhu, Models, stl, wargame,...
4
4.0
May 1, 2021
05/21
by
(karga)
data
eye 4
favorite 0
comment 0
Simple abstract pencil holder with diagonally cut top. I find "vases" printed in vase mode too soft, too flimsy. Wanted something solid to hold a couple of pencils, markers and such. It has some interesting curves and looks like a little work of art. Very still, stable, doesn't wobble. Seem on the back of the model is barely noticeable, since it lands on the natural curve of the model. Package contains full body STL file for people who still want to print it in vase mode. Printed with...
Topics: stl, vase, pencilholder, pencil_holder, pencil, Containers, thingiverse, pencil_cup, art
4
4.0
May 1, 2021
05/21
by
(morrowsend)
data
eye 4
favorite 0
comment 0
I made the bolt holes slightly larger to accommodate the button-headM5 bolts I had, and I also added a bar to help hold down the excess belt material. I printed it using 1.75mm PLA on a Taz 6.
Topics: stl, thingiverse, Machine Tools
4
4.0
Jun 10, 2021
06/21
by
(purplehazey)
data
eye 4
favorite 0
comment 0
ASW-G-08 Gundam Barbatos Mace Spear This is a cosplay model of the Gundam Barbatos spear mace thingy from season 1. I tried to model this full scale but that made no sense in terms of making it actually usable in terms of a cosplay perspective xD Also, It has a slot for 3/4 inch PVC pipe for the spear shaft. I am still working out the logistics on making it more friendly to printing. I plan to revisit it and provide a better version that allows for slots in the blades to reinforce them, plus...
Topics: cosplay_prop, weapon, scifi, Props, thingiverse, cosplay, cosplay_accessory, GUNDAM,...
4
4.0
May 1, 2021
05/21
by
(russell_t)
data
eye 4
favorite 0
comment 0
Top tank with opening for launch lug for Outlander model rocket. 1:1 scale with Estes Outlander.
Topics: stl, thingiverse, Hobby
4
4.0
May 1, 2021
05/21
by
(sablebadger)
data
eye 4
favorite 0
comment 0
I originally created these for the game Rangers of Shadow Deep, a fantastic solo tabletop skirmish game by the designer fo Frostgrave. Each chest has a subtle ? mark on the top, so as not to make it "break the illusion" as it were. Comes in a version without skulls, or you can use them as numbered chests by counting the skulls. If you like this, I have a patreon with a huge archive of models for Tabletop Gaming in Fantasy, Sci Fi, Post-Apocalyptic and more! I specialize in terrain and...
Topics: stl, RangersOfShadowDeep, Frostgrave, Games, objective_marker, thingiverse
4
4.0
May 1, 2021
05/21
by
(silverjaw)
data
eye 4
favorite 0
comment 0
Remix of https://www.thingiverse.com/thing:20983 I remixed this to fit my rug. This measures 180mm in length on each side. Our rug was very curled.
Topics: stl, thingiverse, Decor
4
4.0
May 1, 2021
05/21
by
(squirrelf)
data
eye 4
favorite 0
comment 0
Here is the command to do a heat tuning tower with Klipper firmware TUNING_TOWER COMMAND='SET_HEATER_TEMPERATURE HEATER=extruder' PARAMETER=TARGET START= FACTOR= BAND= the calculated final value follow this formula: value = start + factor * ((floor(z_height / band) + .5) * band) as per the docs: https://github.com/KevinOConnor/klipper/blob/master/docs/G-Codes.md Preferably use a tower that doesn't have an extra foot creating an offset (here the basic foot I made is part of the first level)...
Topics: stl, heat_test, 3D Printing Tests, heat_tower, thingiverse, klipper
10
10.0
May 1, 2021
05/21
by
(zmeygeruch)
data
eye 10
favorite 0
comment 0
2 rings and platform. 4pcs M4x12 bolts and nuts needed. Tested for PETG
Topics: stl, ninebot_max, Ninebot_g30, segway_ninebot, ninebot_g30d, thingiverse, Other, Ninebot_Max_G30
4
4.0
May 1, 2021
05/21
by
3DJP (3djpco)
data
eye 4
favorite 0
comment 0
A remixed version of the Top Extruder Mount by nicocazza. Basically, the same model but split in half. The two .stl files should be printed as-is and without supports. This reduces filament waste while maintaining optimal structural integrity. Installation Tip: You will need to unfasten one side of the top rail to install this mount. Make sure to keep it unfastened until you position the mount and install the extruder. Otherwise, it may be difficult to move.
Topics: stl, thingiverse, 3D Printer Extruders
4
4.0
May 1, 2021
05/21
by
3D_kup kup (3D_kup)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, niva, thingiverse, Lada_Niva, Other
4
4.0
May 1, 2021
05/21
by
3dprint beginner (3dprintbeginnercom)
data
eye 4
favorite 0
comment 0
The mount is designed with my very limited skills, but it works. I was able to install the [BIQU H2 extruder](https://3dprintbeginner.com/biqu-h2-extruder-review/) on the [Creality Ender 6](https://3dprintbeginner.com/creality-ender-6-review/) and print at 100mm/s with excellent results. [Youtube video with the print quality](https://youtu.be/EqPe5yzP3zo) This was done using Klipper firmware. If anyone needs a guide about this, [I wrote one...
Topics: stl, Ender_6, Bigtreetech, Creality_Ender_6, BIQU_H2, 3D Printer Parts, direct_drive, thingiverse
4
4.0
May 1, 2021
05/21
by
A R (ar300500)
data
eye 4
favorite 0
comment 0
Remix of lightninglord88 fan duct (https://www.thingiverse.com/thing:4816138) with the part than covers the manual feed gear removed (crudely) in maya. STL export broken for me so its an OBJ but should import fine. Cura was fusing the presupport that is included around the airoutlet so I include both with and without presupport.
Topics: stl, thingiverse, 3D Printer Accessories
4
4.0
May 1, 2021
05/21
by
AL Ly (alderthingiverse)
data
eye 4
favorite 0
comment 0
modified 2,5 inch jaw chuck. 3d printed metal lathe - https://youtu.be/pYsDyAKekr8. original 2,5 inch jaw chuck - https://www.thingiverse.com/thing:2670620 printer - flying bear ghost 5 filament - PLA FDplast
Topics: stl, thingiverse, DIY
3
3.0
May 1, 2021
05/21
by
ALEKSEY TSYRIK (TSYRIK_ALEKSEY)
data
eye 3
favorite 0
comment 0
Москвич Иван Калита лимузин, был создан лишь кузов. (Исходник сохранил для истории Малашков И. Ю.)
Topics: stl, Automotive, moskvichivankalita, kalita, Vehicles, ivankalita, scale_model, limo, stretch,...
4
4.0
May 1, 2021
05/21
by
Abdulla Jaddou (potatoino)
data
eye 4
favorite 0
comment 0
Ikea shoes cabinet brackets replacement typical PLA settings Nozzle: 210 Bed: 60 Infill: 30%
Topics: stl, shoes, brackets, cabinet, shoes_cabinet, Replacement Parts, thingiverse
4
4.0
May 1, 2021
05/21
by
Adriano Mijno (Adrix64)
data
eye 4
favorite 0
comment 0
Stampa in TPU nero Estrusore direct Titan + E3DV6 (https://www.thingiverse.com/thing:3904868) per MGN12 (https://www.thingiverse.com/thing:4014541) per Anet A8, I3 Pro B o W e similari Slicer Simplify Temperature: Hotend 220 Gradi / Bed 40 Gradi Infill 70% Fast Honeycomb 3 Perimetri 5 Layer superiori e inferiori Primo layer 150% Retrazione 2mm / 40 MM/s Velocità di stampa 40 MM/s Sono compresi il file Step e il file f3d di fusion per fare fascette più lunghe o più corte
Topics: stl, thingiverse, Automotive
14
14
May 1, 2021
05/21
by
Afkar Khan (iamafkarkhan)
data
eye 14
favorite 0
comment 0
You are fortunate enough to have come across our website, IgmGuru, presenting one of the best DevOps training online. The DevOps course online embraces the crack between operational professionals and software developers and also provides superior training on practicing DevOps tools and techniques. If you desire to be a successful DevOps engineer Certification, there is no better stop than us. Learn DevOps and earn self-confidence to sprout your career. Register for the DevOps Online training...
Topics: stl, thingiverse, Other
4
4.0
May 1, 2021
05/21
by
Aitor Guascone (aitor_guascone)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:4369444 REMIX Gopro Session mount on Nazgul 5 - 20 degrees Changed to fit Nazgul5, also made the base thicker 0.5mm more. Changed front so it has less mass. Enjoy.
Topics: stl, GoPro_Mount, GoPro, nazgul5, R/C Vehicles, iflight_nazgul5, Nazgul_5, gopro_session,...
4
4.0
May 1, 2021
05/21
by
Al Bk (to0kan)
data
eye 4
favorite 0
comment 0
I have aluminium extrusions and I want to cap them because I am not a fan of scratching everything in sight. I also want my caps to click in place and stay put. Hence, this design. I printed and tested only the 2020 version, but both 4020 and 4040 should work fine.
Topics: stl, 4020_extrusion, 2020_extrusion, Parts, 4040_extrusion, 4040, thingiverse, 2020, 4020
5
5.0
May 1, 2021
05/21
by
Alberto Tavira (taviralber)
data
eye 5
favorite 0
comment 0
40x20 40x10 Fan Cover
Topics: stl, thingiverse, 3D Printer Accessories
6
6.0
May 1, 2021
05/21
by
Albin Planeille (AlbinP)
data
eye 6
favorite 0
comment 0
- This is a miniature replica of the Berlon clock "Mengenlehreuhr" designed by Dieter Binninger. - It's a Clock that works on the mathematical principle of set theory. - The working principle is simple : • There are 24 light signals arranged on 5 levels. • The round box at the top shows the seconds (by flashing once every second). • The first led raw contains 4 led and each box represent 5 Hours. • The 4 boxes below each represent 1 hour. • The third row contains 11 boxes...
Topics: 3D_printing, TinkerCAD, servo, creality_ender_3, extruder, star_wars, E3D_v6, home,...
4
4.0
May 1, 2021
05/21
by
Alessandro Felli (fringuello)
data
eye 4
favorite 0
comment 0
Struttura in PLA per Fanatec CSL Elite realizzata per ospitare ventola e hardware. E' gestito da Arduino UNO con Motorshield e interfacciato al software SimHub con la configurazione utilizzata. E' progettato per una ventola 80cmx80cm, per lo specifico progetto è stata utilizzata una ventola ad alta velocità San Ace 80 (9GV0812P1H03) Sanyo Denki a 12 V con alimentatore 12V collegato al motoshield di Arduino. E’ presente un foro frontale per l’inserimento di un interruttore che agisce...
Topics: stl, thingiverse, Video Games
5
5.0
May 1, 2021
05/21
by
Alex Ruby (StellarSapience)
data
eye 5
favorite 0
comment 0
This is a dock for a Surface Pro with Type Cover, which has a place to position the Surface Connect cable of the Surface Dock 2, so that the computer can slide right in and connect to the dock. The slot for the tablet is 13.9mm wide, and fits my Surface Pro 5th Gen with Type Cover attached. Will likely fit Surface Pro 3, 4, 6, and 7 as well, with a Type Cover attached. Slot will be too big without type cover, so you will need to shim it or remix it, being careful not to scratch the screen in...
Topics: stl, Microsoft_Surface_pro, surface_dock_2, Surface_Dock, surface_pro_5, microsoft_surface,...
4
4.0
Jun 10, 2021
06/21
by
Alex Yu (_AlexY)
data
eye 4
favorite 0
comment 0
A simple angled stand for 4" bookshelf speakers, good for use with desktop setups. Uses a low amount of filament but is very sturdy. You'll optionally want to stick 4 rubber feet onto the bottom so it doesn't slide around as easily.
Topics: speaker, Bookshelf, thingiverse, Speakers, Audio, stand, stl
4
4.0
May 1, 2021
05/21
by
Alexey Zakharenkov (Lexapskov)
data
eye 4
favorite 0
comment 0
Платформы для установки моторов поперечной (межосевое 97-105мм) и продольной (межосевое 60-64мм) подач на станки WM 210 и WM180. Крышка на шпиндель, между внутренней частью бабки и подшипниками Зная межосевое используем онлайн калькулятор, чтобы рассчитать длину ремня и количество...
Topics: stl, thingiverse, Hobby
5
5.0
May 1, 2021
05/21
by
Alfonso C L Rosell (ASPAFER)
data
eye 5
favorite 0
comment 0
N SCALE INTERIOR WOODLAND SCENICS TOWN AND FACTORY
Topics: stl, 1:160, FERROMODELISMO, n_scale, Hobby, thingiverse, modelrailroad, FERREOMODELISMO,...
4
4.0
May 1, 2021
05/21
by
Alfredo Fernandes (fredconex)
data
eye 4
favorite 0
comment 0
This is a simple design to make possible to change the motor distance from frame so it's possible to properly align the z-axis/leadscrew * I suggest using ABS because the motor will get hot and may deform the PLA.
Topics: stl, Ender_3, 3D Printer Parts, Z_Bracket, thingiverse
4
4.0
May 1, 2021
05/21
by
Alina Matson (mech_alina)
data
eye 4
favorite 0
comment 0
A slide on nail polish bottle attachment to make your nail polish brush easier to handle and more ergonomic. This design is intended to be printed in a TPU/TPE material for the compliance necessary to have the correct fit onto the handle. Pictures show my username embossed into surface, STL provided is blank.
Topics: stl, poppy, beauty, manicure, fingers, nails, Accessories, thingiverse, painting, nail_polish
4
4.0
May 1, 2021
05/21
by
Allen Rawls (bigal945)
data
eye 4
favorite 0
comment 0
Remixed the shelf hanger to custom fit items I wanted to hang in my SMC enclosure, such as google fiber box*, edge router, cat-tv powered hub. Benefited from original author figuring out the hook and spacer separation, customized the lateral size and "shelf" depth to match my components. \* If you're using the wifi from the google fiber box, it is not recommended to mount it vertical OR place it in a metal (faraday) box. Needless to say, I'm not using google's wifi.
Topics: stl, thingiverse, Leviton_smc, Organization
4
4.0
May 1, 2021
05/21
by
Alvin And the chipmunks (skabadrala)
data
eye 4
favorite 0
comment 0
I realized later there is a little gap between the bltouch holder and the stock but it should be fin unless you are printing with a 0.1 mm nozzle
Topics: stl, thingiverse, 3D Printer Accessories
4
4.0
May 1, 2021
05/21
by
Anastasios Manganaris (malfadors)
data
eye 4
favorite 0
comment 0
No supports needed Brim is recommended
Topics: stl, thingiverse, Masterchef, Decor
4
4.0
May 1, 2021
05/21
by
Andreas Altpeter (ArtaiusArdent)
data
eye 4
favorite 0
comment 0
This is my version of some token and cubes holders for the Boardgame It's a Wonderful World to bring it faster on the table. They stagg into eachother, so you can store them in the box. I printed the bowls with 100% infill, because to me it looks better with the transparant PLA this way. The rest is printed with 20% infill. Also, there are two card holders for the game cards and components. Print the cups 6 times, their lids 3 times, the token boxes 2 times, their lid 1 time and the card...
Topics: stl, Toy & Game Accessories, thingiverse, Game accessoires, Token boxes, Wonderful World
4
4.0
May 1, 2021
05/21
by
Andreas Dantz (spielundzeug)
data
eye 4
favorite 0
comment 0
I built a small shelf for my router and bridges. These are all the 3D printed parts I used. I modeled it in a Twitch livestream. I you want to follow me on Twitch for more 3D modeling and printing content (in German) feel free to follow along. https://twitch.tv/spielundzeug
Topics: stl, thingiverse, Organization
