5
5.0
Mar 17, 2021
03/21
by
Zdenek Ondracek (zdenek_o)
data
eye 5
favorite 0
comment 0
Universal mount for 2020 ALU profile, 7x 4mm hole and 5x 5mm hole.
Topics: Electronics, stl, 2020 mount, thingiverse
3
3.0
Jan 5, 2021
01/21
by
Stephen Pollock (spollock28269)
data
eye 3
favorite 0
comment 0
This thing allows you to hang a rigid platform from UNDER the 2020 extrusion, the weight keeps it locked in place. Lift slightly to slide it side to side. It has 3 holes for mounting a camera via the .25 / 20 tripod mount, and even comes with a printable bolt I use it with a logitech clone as you can see in the images.
Topics: stl, Camera, logitech, thingiverse, 2020_mount
4
4.0
Mar 15, 2021
03/21
by
Daniel Gretzke (FruitDude)
data
eye 4
favorite 0
comment 0
Found this [top mounted spool holder](https://www.thingiverse.com/thing:4640640) for the Ender 5. My Ender 5 Plus has 2020 extrusions, so I printed this adapter. Mount the spool holder to the 2020 extrusion on one side, screw the adapter to the 2 remaining holes of the spool holder using M4 screws. Then screw the adapter to the side of the 2020 extrusion. This should stabilize the spool holder sufficiently
Topics: stl, 3D Printing, 2020_mount, thingiverse
8
8.0
Jan 16, 2021
01/21
by
3D Lover (3D_Lover)
data
eye 8
favorite 0
comment 0
The case can be mounted to a 2020 aluminum extrusion without screw! No print support needed.
Topics: 2020_mount, 3D Printer Parts, stl, thingiverse
7
7.0
Mar 17, 2021
03/21
by
David Veit (LrdRagnos)
data
eye 7
favorite 0
comment 0
These are 2 slightly different clips that can be used to mount about anything to a 2020 frame without using screws. You can either use the .stl files to print the clips alone and then glue them to the thing you want to mount on the frame, or take the inventor design files and include them directly in your design. The V2 clip will hold tighter and therefore, is more difficult to remove. I recommend the V1 clip if you intend to remove and apply the device multiple times. There is already a number...
Topics: 2020_mount, stl, 3D Printer Accessories, thingiverse
2
2.0
Apr 28, 2021
04/21
by
Santiago (sdedux)
data
eye 2
favorite 0
comment 0
Remixed milker's Raspberry Pi model A+ base to mount it under a 2020 extrusion of my Hypercube 3D printer
Topics: Computer, raspberry_pi, thingiverse, stl, 2020_mount
9
9.0
Jan 19, 2021
01/21
by
Scott Grim (sgrim70)
data
eye 9
favorite 0
comment 0
I have an old iPad 2 laying around unused and decided to mount it to my FT5 for running Octoprint. My goal was to make a mount that could swivel side to side as well as tilt up and down for better viewing. I also wanted to make removing the iPad as simple as possible. I will be adding additional mounts in the near future. Hardware required: 4 M3x16mm button head screws 4 M3 lock nuts 2 M4x12mm button head screws 2 M4 T Nuts 1 GoPro style bolt 1 GoPro style nut
Topics: Folgertech_FT-5, thingiverse, 2020_mount, ipad2 2020 mount, FolgerTech_FT5, 3D Printing, FT5,...
3
3.0
Jan 6, 2021
01/21
by
Oleksandr Min (olemin)
data
eye 3
favorite 0
comment 0
placement of electronics on din rail
Topics: 3D Printers, stl, corexy, thingiverse, 2020_mount
4
4.0
Jun 21, 2021
06/21
by
Aleksandr Safonov (Alllex)
data
eye 4
favorite 0
comment 0
The corner mount for 2020 extrusion. By default it accepts up to M6 bolts, but you can modify the file for smaller bolts if you want to (blender file included). I've used PLA and Carbon Fiber PC and they both work fine. No supports required.
Topics: thingiverse, corner, 2020_mount, DIY, stl, 2020, mount
10
10.0
Jan 10, 2021
01/21
by
Walter Huwels (WalterSKW)
data
eye 10
favorite 0
comment 0
Just a simple T-connector to connect to 2020-bars using 5mm bolts.
Topics: thingiverse, stl, 3D Printer Parts, 2020_mount, 2020
3
3.0
Oct 14, 2021
10/21
by
Oleksandr Katerushyn (Zloy_No_Name)
data
eye 3
favorite 0
comment 0
Fastening the 2020 profile at an angle of 90 degrees. Filament for experimentation and motivation. Thanks. 4731 1856 0765 7753 Visa
Topics: thingiverse, 2020_mount, stl, 3D Printer Parts, 2020
4
4.0
Jun 6, 2021
06/21
by
Jakub Gocyk @ Allprint (JGFTW)
data
eye 4
favorite 0
comment 0
Simple bracket, created with having in mind the orientation of printing, which utilizes best strength property. Designed for 2020 Aluminium profiles, different sizes and for M4 and M5 screws.
Topics: thingiverse, DIY, stl, 2020_mount, 2020_aluminum, 2020
3
3.0
Jun 7, 2021
06/21
by
CARL ONDRAKA (condraka)
data
eye 3
favorite 0
comment 0
Snapmaker 2020 TopAdapter. Used to hold 2020 extrusion on top of the z-axis. Requires longer bolts for the top and a "T" Bolt for the 2020 extrusion. Allows the extrusion to slide left/right to adjust the filament guide plate on the right side. https://www.thingiverse.com/thing:3832178
Topics: snapmaker, thingiverse, stl, 3D Printer Accessories, 2020_mount
5
5.0
Apr 4, 2021
04/21
by
Steven Moss (sjmoss)
data
eye 5
favorite 0
comment 0
These gantries were created to custom fit and mount the following LED Light Bars obtained on Amazon at: https://www.amazon.com/gp/product/B0822QJWQ5?ref=ppx_pt2_dt_b_prod_image The 3 sided base fits the 2020 profile nicely, I designed it myself in Meshmixer after not being able to source a similar base to start from here on Thingiverse, it should be able to serve as a good launching point for future remixes. I created these for my Ender 3, it became a viable option once I took the spool off the...
Topics: thingiverse, 3D Printer Accessories, 2020_mount, Ender3, stl
3
3.0
Jan 9, 2021
01/21
by
Michael OBrien (mc1457)
data
eye 3
favorite 0
comment 0
Here's a set of useful 2020 parts I designed. ##Corner Clip## Snaps on to 2020 extrusion to hold cables in the slot. Great for organizing long cable runs. ##Cable Tie## Use 2 of the M4 T-Slot nuts and 2 M4x8 bolts to attach this tie to a 2020 rail. You can use two small zip ties to hold up to a 10mm cable bundle in the slot at a 90 degree angle. (the original Fusion design is parametric - I can create any size up to about 14mm upon request) ##M4 T-Slot Nut## These handy t-slot nuts insert...
Topics: thingiverse, 2020_extrusion, stl, 2020_mount, DIY, 2020
3
3.0
Apr 1, 2021
04/21
by
ben Bar (benbar)
data
eye 3
favorite 0
comment 0
ADAPTER TO USE PHONE AS OCTOPRINT SCREEN TWO FILES, ONE FOR THE LEFT SIDE AND ONE FOR THE RIHGT SIDE
Topics: 2020, thingiverse, 3D Printer Accessories, stl, 2020_mount
10
10.0
Jan 10, 2021
01/21
by
Walter Huwels (WalterSKW)
data
eye 10
favorite 0
comment 0
Small sliding hook to attach something (like a cable bundle...) to a top 2020-profile. S3D factory file included. Never thought this would be such a hit ... made a collection of different models I would find a use for. Make your choice. **30082017** added slider6 Slider6 has a round sliding head. Can slide and turn around 360°C. I use it to attach the cable bundle to the printhead. It can slide from the left to the right and rotate to follow the movement and orientation of the cables.
Topics: thingiverse, hook, stl, 3D Printer Parts, 2020_mount, 2020
4
4.0
Apr 1, 2021
04/21
by
Jennifer Sirtl (D_o_S)
data
eye 4
favorite 0
comment 0
Nice! I needed a additional feet for my Ender printer, so i thought, thingiverse will have one, wich is compatible to the original (diameter, height), but - no there wasn´t. So i made a simple one, compatible to the original, can be used with a 5mm Screw. My setup: DIN912 M5 8mm Screw M5 Keystone for 2020-Profile thats it.
Topics: thingiverse, 3D Printer Parts, feet, Ender, stl, 2020_mount
2
2.0
Nov 30, 2021
11/21
by
David Honig (FrisbeeD)
data
eye 2
favorite 0
comment 0
The flat end sticks out enough to use CA glue or Acetone to attach to whatever you want. Original intent was to attach after a print so I didn't need to waste filament on support. Note: The fit is not tight. Probably will not hold vertically. I've included the .f3d file if you want to make changes. Happy Making!
Topics: thingiverse, 3D Printer Accessories, 2020_extrusion, stl, 2020_mount
6
6.0
Mar 17, 2021
03/21
by
Sammy Michal (SammyOne)
data
eye 6
favorite 0
comment 0
Simple and quick to print mount for BIQU MOFSET BTMOS 2.0. It's intended to be mounted on 2020 or 2040 rails. The trick to mounting it is to mount to the rail first and then mount the module to the mount. Here's the part that this work on: https://www.amazon.com/gp/product/B01HEQVQAK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 https://www.aliexpress.com/item/BIQU-Heat-Bed-Power-Module-Expansion-Hot-Bed-MOS-Tube-for-3D-Printer/32889932617.html
Topics: 2020_mount, 3D Printer Accessories, mofset, stl, thingiverse, biqu
4
4.0
Aug 9, 2021
08/21
by
Oleksandr Katerushyn (Zloy_No_Name)
data
eye 4
favorite 0
comment 0
Plates for the corner connection of the aluminum profile 2020. I drew and printed them for my printer project. (Пластины для углового соединения алюминиевого профиля 2020. Рисовал и печатал их для своего проекта принтера.)
Topics: thingiverse, 3D Printer Parts, 2020_mount, 2020_aluminum, stl
4
4.0
May 1, 2021
05/21
by
Ian Farrell (ianhfar)
data
eye 4
favorite 0
comment 0
Offset SpoolHolder to fit 2020 extrusion. This design was inspired by https://www.thingiverse.com/thing:2055516 I wanted a londer spool holder, so modelled a 100mm spoolholder, with no supports required.
Topics: stl, 2020_mount, 3D Printer Accessories, filament_spoolholder, thingiverse
3
3.0
Jun 21, 2021
06/21
by
Andy T... (zueski)
data
eye 3
favorite 0
comment 0
I made this for my VORON build to manage wiring for lighting and mini display for the top. The other anchors I tried using tended to break easily, even in ABS. These worked well for me. M3 is well tested, the M5 model may need some adjustment for tolerances.
Topics: cable_holder, thingiverse, 3D Printer Accessories, 2020_mount, stl
2
2.0
Aug 22, 2021
08/21
by
Mario Schubert (docMario)
data
eye 2
favorite 0
comment 0
#Filament Guide# For 2020 aluminum profiles This simple filament guide is meant to be mounted on top of the upper beam of a BIQU BX printer or any other printer with a 2020 profile. note: the first print came out clumsier than I anticipated. I will do a re-work with a leaner base soon. *Additional parts needed:* 2x M3 screws 2x M3 T-Nut (If you don't have them, just print 'em: https://www.thingiverse.com/thing:3050607)
Topics: 3D Printer Accessories, filament_guide, 2020_mount, stl, thingiverse
2
2.0
Jan 18, 2022
01/22
by
Salvatore Elio Giachinta (salvogi)
data
eye 2
favorite 0
comment 0
This is a mount for 2020 and 2040 alluminium profile.
Topics: thingiverse, 2020_mount, Tools, stl, camera, 2040_mount, phone
2
2.0
Apr 20, 2022
04/22
by
Ahmet Ertem (ahmetertem)
data
eye 2
favorite 0
comment 0
I've made this design for my photo booth made from 2020 profiles. Tried to keep main design' rules.
Topics: 2020_mount, thingiverse, camera_mount, 3D Printer Accessories, stl
2
2.0
Sep 13, 2021
09/21
by
Giles Wells (gileswells)
data
eye 2
favorite 0
comment 0
My goal here was to use the inspiration of [LDG92's original box](https://www.thingiverse.com/thing:3372894) and modify it so that I could mount it to a single rail without needing access to the end of the rail. To do this I actually re-created the box and make it longer (so I could remove the box with or without the buck converter already mounted) and then changed out the bottom mount for a new system that uses a T-nut with an m3 bolt. You could use a normal T-nut if you have two available but...
Topics: stl, 2020_mount, thingiverse, 3D Printer Accessories, 2020, buck_converter
2
2.0
Apr 19, 2022
04/22
by
Manish Wayz (manishwayz)
data
eye 2
favorite 0
comment 0
I created this 2020 extrusion mounting insert to help with creating mounts.
Topics: 2020_mount, thingiverse, 2020, 2020_extrusion, 3D Printer Accessories, stl
0
0.0
Aug 14, 2022
08/22
by
Ultimo Benjamin (1PLtA)
data
eye 0
favorite 0
comment 0
A nicely designed part (by dbfrompw) remixed for mounting a Logitech C615 webcam (or many others).
Topics: 2020_extrusion, 2020_mount, stl, 3D Printer Parts, thingiverse, 2020
0
0.0
Aug 15, 2022
08/22
by
Christoph Held (Penskop)
data
eye 0
favorite 0
comment 0
Befestigung, Fixierung für 20/20 Alu-Profile, bzw. in diesem Fall für eine CNC3018. Für die Befestigung am Profil mit M5 Schraube und T-Nut-Mutter. Längstschlitz zum Ausgleich etwaiger Unterfütterungen oder Auflagen. Support, fixture for 20/20 profiles, e. g. at the CNC3018, by M5 screw and t-nut and the possibility of leveling.
Topics: 2020_mount, stl, 2020_aluminum, thingiverse, cnc3018, Tool Holders & Boxes
6
6.0
Mar 17, 2021
03/21
by
fabrizio lazzeretti (iamfablaz)
data
eye 6
favorite 0
comment 0
I'm just upgrading the Tarantula with a few things, some are purchased, other are printed, i made this one to add a front brace, just under the board. Though you may need to slide extruder and board to their top most position, the brace will fit at its bottom and provide better stiffness. Because i modeled with Rhino it came out upwards, just rotate it 90° on Y-Axis and it will be ready to be printed.
Topics: 2020_mount, Z_brace, brace, 3D Printer Parts, stl, thingiverse
9
9.0
Jan 16, 2021
01/21
by
Evan Brown (aquafuzzable)
data
eye 9
favorite 0
comment 0
Simple 2020 compatible filament guide.
Topics: 3D Printer Accessories, thingiverse, 2020_mount, 2020, filament_guide, stl
3
3.0
Jun 7, 2021
06/21
by
Kelly Jordan (evil_k)
data
eye 3
favorite 0
comment 0
Some Cable Support brackets I made up to help with cable management on my modified FT5 printer. For 2020 extrusion. Mount to 2020 extrusion with m5 hardware.
Topics: thingiverse, 3D Printer Parts, stl, 2020_mount, 2020, Cable Management
10
10.0
Mar 18, 2021
03/21
by
Gord Broom (gjbroom)
data
eye 10
favorite 0
comment 0
A mount for a generic 12V power supply with tapped M3 holes on the bottom. You will need two mounts. I use @Tech2c's trick for tee nuts (hammer nuts) -- one side has a slot since you can't preload both sides. PDF drawing is included so you can compare against your power supply before printing.
Topics: 2020_mount, power_supply_mount, thingiverse, 3D Printer Accessories, stl
8
8.0
Jan 15, 2021
01/21
by
Jeremy Mann (jeremyrichardmann)
data
eye 8
favorite 0
comment 0
An Adapter for GearHead WC7500HD mounting. You will need to take apart the GearHead native mount, the part with the ball-socket joint can be natively screwed into this with a proper 3mm screw.
Topics: hypercube, thingiverse, Camera, stl, 2020_mount, camera_mount, Gear_Head
4
4.0
Apr 8, 2021
04/21
by
William Salmon (Mast3rBlast3r)
data
eye 4
favorite 0
comment 0
Wanted a fast to print, sleeved pi case with an optional fan. Here it is with extra hexes! Shown with 50mm fan which is what I had on hand.
Topics: 2020, 2020_mount, stl, thingiverse, Rasberry_PI, 3D Printer Accessories
10
10.0
Jan 18, 2021
01/21
by
Matt Brown (dakron)
data
eye 10
favorite 0
comment 0
Remix of Keith1212's 3D [Printer Heated Bed Power Module Housing](https://www.thingiverse.com/thing:1985754). Added some mounting points for 2020 extrusion with M5 holes.
Topics: MOSFET, 3D Printer Accessories, thingiverse, 2020_mount, 2020, stl, heatbed
2
2.0
Jul 22, 2021
07/21
by
Martin Meder (Azrael6633)
data
eye 2
favorite 0
comment 0
Hello This is a remix of two 2020 Display mounts for BTT TFT35 V3. i decided to mix both so it fits my needs perfect.
Topics: bigtreetech_tft35_v3, 3D Printer Accessories, stl, thingiverse, 2020_mount
6
6.0
Apr 20, 2021
04/21
by
H. Gregor Molter (CyberDeck)
data
eye 6
favorite 0
comment 0
A simple spool holder for 1kg spools. Can be mounted against a 2020 profile. Uses 608ZZ ball bearings to ensure low friction while extruding filament.
Topics: thingiverse, stl, 2020_mount, 3D Printer Accessories, spool_holder, noname
0
0.0
Aug 13, 2022
08/22
by
Alex Shepherd (alexGSofNZ)
data
eye 0
favorite 0
comment 0
I built an enclosure out of 8mm 'twinwall' polycarbonate - basically a hard coreflute material. The top is hinged, but also part of the front is hinged as well. Therefore you can reach in under the bed to turn the original power switch on, or insert the SD card. I had seen enclosures with only doors on the front and thought that must be a nuisance - most of the bed cleaning and belt tensioning etc. requires access from the top! Here are all the parts I knocked up to make this work. They were...
Topics: enclosure, 2020_mount, TRONXY, stl, 3D Printer Parts, thingiverse, X5SA
2
2.0
Nov 30, 2021
11/21
by
David Honig (FrisbeeD)
data
eye 2
favorite 0
comment 0
Find a part you want to attach to some 2020 rails? For a quick and dirty way, print out this and attach it. It sticks out a little further than the rail so use some glue or acetone for PLA and attach away. The .f3d file is included so feel free to shorten, lengthen, or change the tolerance. Happy Making!
Topics: thingiverse, 3D Printer Accessories, 2020_extrusion, stl, 2020, 2020_mount
9
9.0
Jan 16, 2021
01/21
by
Rodney Kirstine (rkirstine)
data
eye 9
favorite 0
comment 0
This is a filament runout sensor mount. It is designed to mount a PCB mounted mechanical micro-switch type mechanical end stop for use in detecting when the end of the filament is reached. Example of the end stop: https://folgertech.com/collections/sensors-and-modules/products/end-stop
Topics: 3d_printer, FolgerTech, thingiverse, stl, 3D Printer Accessories, 2020_mount
12
12
Jan 10, 2021
01/21
by
Terence Gross (tezz)
data
eye 12
favorite 0
comment 0
Made for M5x10m button head bolt, and can fit with T-Nut M5 T Slot Slide In T-Nut 2020 Series Aluminium Metal 3D Printer, you can get them here, http://www.ebay.co.uk/itm/M5-T-Slot-Slide-T-Nut-2020-Series-Aluminium-Metal-3D-Printer-Multi-Packs-/291822548522?var=&hash=item899038c6d9 If you remix this or make alterations, please upload them back with all original solid works files so that everyone can use them, and people that don't have solid works can then benefit from the modifications,...
Topics: thingiverse, stl, 3D Printer Parts, 2020_mount, corner_bracket, 2020
6
6.0
Apr 20, 2021
04/21
by
John Tsolomitis (solly747)
data
eye 6
favorite 0
comment 0
A bracket to mount 3 aviation plugs for your wiring. I use 6 and 8 pin plugs but there's various ones available.
Topics: thingiverse, stl, 2020_mount, aviation, mounting_bracket, 3D Printer Accessories
3
3.0
May 1, 2021
05/21
by
Randy Watson (MoJ0969007)
data
eye 3
favorite 0
comment 0
LED light strip with a mount that snaps on to 2020 extrusion. I designed this in Fusion 360. I am using them on my 3D printer enclosure to provide light from overhead. The extrusion clips attach to the main body using M5 x 20mm bolts and M5 nuts. The strip fits in the main body via compression but could be permanently affixed using hot or CA glue. There are holes at either end of the main body that allows for 3.5mm OD 2 conductor cable. The clips that attach to the main body are very tight when...
Topics: stl, Led_Holder, Hobby, 2020_mount, 3d_printer_enclosure, thingiverse
8
8.0
Jun 11, 2021
06/21
by
(PetarSerbianDude)
data
eye 8
favorite 0
comment 0
Summary 4x M4 NUT 4X M4 BOLT Some sort of computer cooler ... Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: /
Topics: Anycubic_Kossel, 2020, coler, kossel, 2020_mount, thingiverse, kossel_mini, stl
9
9.0
Apr 17, 2021
04/21
by
Jihad Estrada (jaeestrada)
data
eye 9
favorite 0
comment 0
Purchased a cheap IEC C14 to use with my printer's 2020 extrusion frame. Used this to mount it easily. Uses 4 M5 10mm bolts & 2 M5 Hammer nuts https://www.aliexpress.com/item/HIGH-QUALITY-Red-Light-Power-Rocker-Switch-Fused-IEC-320-C14-Inlet-Power-Socket-Fuse-Switch/32639960373.html?spm=2114.13010608.0.0.PikYUR
Topics: 2020, thingiverse, c14, stl, 2020_extrusion, 2020_mount, 3D Printer Accessories
3
3.0
Jan 5, 2021
01/21
by
David Dunlap (Sader1995)
data
eye 3
favorite 0
comment 0
Basic arm camera mount for a Reolink e1 camera that hooks into the 2020 extrusion at th front of the build plate. This sits low enough that the build plate clears the arm when it all the way to the front. The top plate is designed to work with the mounting plate that comes in the box with the Reolink camera. You could probably remix the top plate for different camera if you wanted, but these are the cameras that I use, as they tie in with my hoe security cameras as well, for one stop access to...
Topics: camera_mount, Reolink, stl, thingiverse, 3D Printer Accessories, camera, 2020_mount
6
6.0
Jan 21, 2021
01/21
by
Drew Moseley (drewmoseley)
data
eye 6
favorite 0
comment 0
These are a few accessories I remixed in Fusion360 for my Hypercube 300 (https://www.thingiverse.com/thing:2517628). They are intended to be snap fit on any 2020 extrusion. Update: 2018-11-14 I added a few accessories I use with my 2020-based Hypercube. These are not to attach to the 2020 but rather to the Ikea Lack table (or really any wooden surface) that I use as a stand. One is a mount for my fire extinguisher...
Topics: hypercube, 3D Printer Accessories, thingiverse, 2020_extrusion, 2020_mount, 2020, stl
3
3.0
Jan 20, 2021
01/21
by
David Budinich (dbfrompw)
data
eye 3
favorite 0
comment 0
Single Bowden Extruder mount for 2020 bosch tubbing.
Topics: 3D Printer Parts, thingiverse, 2020_mount, FolgerTech_FT5, 2020, FT5, stl
