8
8.0
Jan 17, 2021
01/21
by
Koen tavish (koentavish)
data
eye 8
favorite 0
comment 0
Small clip designed to fit the 20/20 extrusions of the Tevo Tarantula and hold the included cable sleeve. Secures to the 20/20 tool-less, flexible cable sleeve also stays in there naturally although it benefits from a small ziptie(fits in slot).
Topics: sleeve, clip, cable_management, ziptie, 3D Printer Accessories, cable_holder, thingiverse,...
9
9.0
Jun 20, 2021
06/21
by
Bryce Lanham (ChickeNES)
data
eye 9
favorite 0
comment 0
These are braces originally designed for stiffening the frame of my Anet A2, but would be suitable for the Tevo Tarantula or really any time one would need to stiffen a 20mm extrusion frame cheaply. These could probably use some refinement, but they've worked well for me so far. I've also included a hold-down for 40mm wide extrusion. The screw holes are intended for M5 cap head screws.
Topics: anet_a2, 2040, thingiverse, stl, 2020, 20mm_extrusion, pvc, tevo_tarantula, 2020_extrusion, 3D...
12
12
Mar 22, 2021
03/21
by
Alec Lilley (_HAZMAT)
data
eye 12
favorite 0
comment 0
Bigger, Beefy, and Better than previous versions! Jig/Guide/Yoke for creating a 1/4 ground plane antenna suitable for transmitting. Uses brass rod for the elements. *** This MkIII design boasts the following features: - Thicker yokes for support-less printing and improved rigidity. - Dedicated cable-tie mounting holes. - Alignment studs for easier assembly and improved rigidity. *** My specific instance of this object was designed for the 2m amateur radio band. 73, ZL1HAZ
Topics: Engineering, stl, conduit, uhf, ham, coax, 70 cm, 144, ground, 20mm, thingiverse, 1/4 wave,...
12
12
Jan 18, 2021
01/21
by
Kyb Ynn (Kybynn)
data
eye 12
favorite 0
comment 0
This is a 1/72 scale model based on a world war 2 German bunker. The bunker is inspired by a C-Regelbau: Nr. 1 design, as used in the west of Germany to defend against France during WW2. Please post a picture of the result when printing this model, I don't have a printer and would love to see the result! Edit: I included another door model, since I didn't like the initial one. Leave a tip if you like my work :) I would love to make more of this kind of stuff, so please help me out :)
Topics: wargames, crossfire, wargame, scale_model, WW2, wargaming_terrain, Bunker, thingiverse, Buildings...
4
4.0
Jun 6, 2021
06/21
by
Bob Mackenzie (Bob_Mack)
data
eye 4
favorite 0
comment 0
http://bobmack3d.com/ This is the US 106mm Recoilless gun made by the USA and used around the world from the 60's to the current day. It was widely used by US forces in Vietnam This is a free model supporting my Kickstarter for Vietnam vehicles. You can sign up for the newsletter at http://bobmack3d.com/ and see many pictures of the printed models on Facebook: https://www.facebook.com/BobMack3d The STL is scaled at 1/100th (15mm) but the model is designed to be detailed enough to produce a very...
Topics: thingiverse, 106mm, Models, 20mm, gun, Vietnam, USA, 15mm, stl, 28mm, recoiless
3
3.0
Jun 21, 2021
06/21
by
Brian Compton (WarHawk8080)
data
eye 3
favorite 0
comment 0
Imported original from [https://www.thingiverse.com/thing:3005314](here) shrank to 120mm, then used image to create holes and aligned Thanks for original designer!!!!! Such an awesome design!!!!!
Topics: remix, static, thingiverse, Static_Pressure, TinkerCAD, Other, stl, 120mm_fan, blades, air, 20mm,...
4
4.0
Apr 16, 2021
04/21
by
Arthur Jordan (kauz)
data
eye 4
favorite 0
comment 0
If you have a laser in a common 12mm "Aixiz" enclosure, this part can make it fit into your 20mm PROXXON mount on a CNC machine or whatever. https://www.youtube.com/watch?v=5Ztl6tL9gxg&feature=youtu.be In order to use it with the "Mostly Printed CNC -Add On- Dremel 300 mount" you have to sand the bore to 20mm... Here is a guide on how to set up a laser gcode script: http://jtechphotonics.com/?page_id=2012
Topics: mostly_printed_cnc, 20mm, laser_cutter, Laser_engraver, CNC, 12mm, thingiverse, Aixiz, stl, laser,...
3
3.0
Jan 8, 2021
01/21
by
Remy Janssen (RemyJanssen)
data
eye 3
favorite 0
comment 0
Mounting frame for 20mm switches and a thermometer. The frame fits in the front of an Ikea Lack table. Will share photos when fixed to a Lack table. Standard 12v 20mm switches from China. The thermometer is also one from a the big Chinese website... Thermometer size -> 48x28mm external measurements.
Topics: stl, 20mm, switch, ikea_lack, thermometer, thingiverse, thermometer_mount, 12v, 3D Printer...
8
8.0
Jan 20, 2021
01/21
by
Gil MARCHAL (Da6oN)
data
eye 8
favorite 0
comment 0
140mm Fan static pressure booster. 8 and 12 blades versions. 10, 15 and 20mm height This make is inspired by 120mm Fan Static Pressure Booster - 8 or 12 blades versions https://www.thingiverse.com/thing:2429022 EDIT 21/07/2018: Updated files EDIT 17/08/2018: Updated files V2 and V3 Follow me for the latest news, see my designs :) https://www.thingiverse.com/Da6oN/designs Please feel free if you like this model and you want to support my free work, you can donate me with paypal:...
Topics: 15mm, air pressure, 10mm, pressure, fan, static, 140mm, thingiverse, Booster, Boost, FanBooster,...
3
3.0
Jan 4, 2021
01/21
by
Mike Tong (BigMrTong)
data
eye 3
favorite 0
comment 0
15mm re scale and minor rework of the VidovicArts Ork Infantry for use in 15mm scale wargaming. (I have included a bespoke HotT base too as they guys are chunky)
Topics: dnd, 20mm, ork, figures, figure, wargames, wargaming, miniatures, Greenskin, hott, Games, wargame,...
4
4.0
Apr 9, 2021
04/21
by
Uche Eke (uche_eke)
data
eye 4
favorite 0
comment 0
Basic adustable support for the mini kossel 170mm dia borosilicate glass bed. Pointer on the rear to help with positioning, with a small hollow in the support platform to attach velcro/double sided sticky tape for extra adhesion beyond the pressure fit.
Topics: 20mm_extrusion, 3D Printer Parts, stl, support, glass_plate, thingiverse, mini_kossel, reprap
3
3.0
Oct 15, 2021
10/21
by
Bas Imagineer (Imagineer_NL)
data
eye 3
favorite 0
comment 0
Set of benchdogs / planing stops for 19mm and 20mm holes. Spacing between the centers is 10cm NOTE; the sets for 19mm holes have 18mm pins, the sets for 20mm holes have 19mm pins. With the spacing of 10cm this makes a snug fit but not too snug. Sidemounted holes for miniclamps Flip them around and you have nice small pin stands for oiling/painting/staining.
Topics: thingiverse, 20mm, square, plane stop, stl, workbench, planing, bench dog, DIY, benchdog, 19mm,...
6
6.0
Apr 18, 2021
04/21
by
-N- (-N-)
data
eye 6
favorite 0
comment 0
have a 20x20 board but a 30,5x30,5 stack? shit wil fix it
Topics: 20mm, thingiverse, stl, R/C Vehicles, mount
4
4.0
Mar 22, 2021
03/21
by
Kobus (Bombermann)
data
eye 4
favorite 0
comment 0
20 mm conduit saddle. Mounting holes 4mm Updated stl file
Topics: 20mm, stl, electricity, saddle, conduit, Household, 20 mm, electric, thingiverse
8
8.0
Jun 20, 2021
06/21
by
Chris Woodle (superwoodle)
data
eye 8
favorite 0
comment 0
A 20mm test cube (solid)
Topics: cube, thingiverse, stl, 3D Printing Tests, test, 20mm, test_cube
5
5.0
Apr 1, 2021
04/21
by
Maksym Mikołajczyk (ThePrintingGoesEverOn)
data
eye 5
favorite 0
comment 0
Tapered and non-tapered versions of a 20mm square to 32 mm circle base adapter. The Tapered version has quite a thin wall on the top most layers, so it may be problematic. Follow me on social media: https://facebook.com/tinyclone.custom.tabletop.miniatures/ https://www.instagram.com/tinyclone/ My MMF: https://www.myminifactory.com/users/tinyclone
Topics: 32mm_base, thingiverse, accessory, adapter, tabletop, Toy & Game Accessories, 32mm, adaptor,...
11
11
Jan 18, 2021
01/21
by
Daniel Särnblom (SerialJaywalker)
data
eye 11
favorite 0
comment 0
Nothing fancy, just a 5 mm thick 3 mm tall L-shaped thing that I did so I can use my Mordheim crew in my WHFB Chaos army and still have them on 20 mm for Mordheim. Only uploaded it so that I wont lose the file.
Topics: Games, thingiverse, 25mm_Bases, converter, 25mm, wargaming, stl, 20mm
4
4.0
Mar 22, 2021
03/21
by
Claude Theroux (ctheroux)
data
eye 4
favorite 0
comment 0
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets. For 90 degrees versions of these brackets, see https://www.thingiverse.com/thing:313216 Support is not needed This object main web page is: http://www.ctheroux.com/20-mm-wide-135-degrees-t-slot-angle-brackets/. You can request the source files on the page listed above.
Topics: 20mm Brackets, stl, 135 deg. brackets, 3D Printer Parts, T-slots, Brackets, 20mm Extrusion,...
8
8.0
Jan 15, 2021
01/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 8
favorite 0
comment 0
So when you have am itch you need to simply sctrach it and that is what we did with this build as we needed feet for a 20 x 20 Maker Rail V-Slot project we where building (see it here: https://www.thingiverse.com/thing:2486606) so whipped these up in Tinkercad and designed them to work with a #10 Magic Nut Thing (also included with foot) as they receive two felt pads (http://amzn.to/2vEiYn2) to provide a professional finished look to the project. **Update:** Added a 27mm (or 1 Inch) foot...
Topics: thingiverse, 2020_extrusion, stl, rail, 2020, Parts, v-slot, 20mm
3
3.0
May 21, 2021
05/21
by
Giulio Sacco (GiulioLucio)
data
eye 3
favorite 0
comment 0
I've printed a couple of calibration cube but on my printer the 90 degree angles have some flaws that lead to bad measurements, the axis letters are even worst. I've made this cube to solve the problem and chamfers worked perfectly. The small hole is suposed to identify the orizontal axes.
Topics: calibration_test, 3D Printing Tests, printer_calibration, test_print, Cube, thingiverse, 20mm cube,...
8
8.0
Jan 17, 2021
01/21
by
Niccolò Maggioni (nmaggioni)
data
eye 8
favorite 0
comment 0
This mount enables bare micro AIO cameras like [this one](https://www.banggood.com/Eachine-Lizard95-FPV-Racer-Spare-Part-AIO-5_8G-48CH-25mw100mw-Switchable-VTX-600TVL-Camera-p-1151477.html?cur_warehouse=CN) to be fitted in frames that accept 20mm or 19mm wide cameras, such as the [RunCam Micro](https://www.runcam.com/images/microswift/micro-swift-size.jpg) in the [Quattrovolante Libero](http://www.quattrovolante.com/Fabry/product-category/q-libero-2/). Design based on M2 screws and nuts. Works...
Topics: fpv, fpv_camera_case, fpv_mount, AIO, thingiverse, aio_cam, fpv_camera_mount, 19mm, R/C Vehicles,...
112
112
Oct 20, 2018
10/18
by
Chun Yu Chen
movies
eye 112
favorite 0
comment 0
2018 Lyrids meteor shower First time trying time-lapse. A7RIII Tokina FiRIN 20mm f/2 FE MF 15 seconds exposure 1 seconds interval ISO3200 F2.0 Image count 267 across 80 minutes Edit in Adobe lightroom Instagram/Flickr/500px: @guschen802 Source: https://www.flickr.com/photos/134358204@N08/41616316712 Uploader: Chun Yu Chen
Topics: Flickr, video, 20mm, tokina, a7riii, timelapse, meteorshower, lyridsmeteorshower, lyrids, meteor,...
123
123
Oct 20, 2018
10/18
by
Chun Yu Chen
movies
eye 123
favorite 0
comment 0
2018 Lyrids meteor shower First time trying time-lapse. A close up on one of the fireball A7RIII Tokina FiRIN 20mm f/2 FE MF 15 seconds exposure 1 seconds interval ISO3200 F2.0 Edit in Adobe lightroom Instagram/Flickr/500px: @guschen802 Source: https://www.flickr.com/photos/134358204@N08/39848972630 Uploader: Chun Yu Chen
Topics: Flickr, video, tokens, timelapse, 20mm, meteorshower, lyridsmeteorshower, lyrids, sony, astronomy
8
8.0
Jan 19, 2021
01/21
by
Simon Wilson (simonwilson)
data
eye 8
favorite 0
comment 0
Here is a bracket I'm using to connect 2060 extrusion to Openbuilds C-beam Extrusion (80mm wide) for a CNC Mill that I'm currently designing. This bracket is used to connect 20mm wide extrusion to 80mm extrusion. It uses M5x10mm bolts for mounting the bottom of it (side with 4 holes) to the 80mm extrusion and M5x12mm bolts for mounting it to the 20mm extrusion (side with 3 holes). I've been printing my brackets around 85% infill for higher strength but adjust infill according to your needs. If...
Topics: connectors, CNC_Router, c-beam, CNC_Machine, 2020, aluminum, stl, brace, openbuilds, 2080,...
4
4.0
Mar 19, 2021
03/21
by
Can Bağdiken (canbagdiken)
data
eye 4
favorite 0
comment 0
Helps to drilling 2020 sigma for joining
Topics: Machine Tools, 2020_mount, 20mm, thingiverse, 2020extrusion, corner, sigma20, 2020sigma,...
10
10.0
Apr 23, 2021
04/21
by
chris bordeleau (buffcleb)
data
eye 10
favorite 0
comment 0
45 degree gussets for 2020 extrusion. The one sided offset was designed so I could mount it on a FolgerTech 2020 i3 under the Z motor mounts. I'll be uploading a bunch of different variations of this over the next couple of days. The standard ones (without short or long in the filename) fit inside a 100mmx100mm square. The two sided one probably does not add a lot of strength and takes much longer to print due to the support that is needed. But it looks cool. I have only test fit the one sided...
Topics: 2020, stiffener, corner_gusset, brace, folger_technologies, stl, FolgerTech', corner_bracket,...
9
9.0
Jan 19, 2021
01/21
by
Simon Wilson (simonwilson)
data
eye 9
favorite 0
comment 0
This is a bracket used to connect 2040 extrusion to either 2080 extrusion or Openbuilds C-beam Extrusion (80mm wide). It is part of a collection of brackets that I have been designing for a CNC Mill I am currently building. It uses M5x10mm bolts for mounting the bottom of it (side with 4 holes or 8 if using the extended brace) to the 80mm extrusion and M5x12mm bolts for mounting it to the 40mm extrusion (side with 6 holes). I've been printing my brackets around 80-90% infill for higher strength...
Topics: connectors, CNC_Router, 2040_extrusion, Aluminium, c-beam, CNC_Machine, 2020, aluminum, 40mm, stl,...
11
11
Jan 14, 2021
01/21
by
Gerald Lafreniere (spingoogL)
data
eye 11
favorite 0
comment 0
Terminals use #4-40 hardware Bill of Materials 8x #4-40x1/2" screw 4x #4-40x3/8" screw 16x #4 washers 12x #4-40 nuts (1/4" AF) 4x Velleman type fuse holder Also included. An analogue of the Velleman type fuse holder(not intended to be printed). As well as, a couple of my own designs that can receive the nickel plated fuse holding ends.
Topics: M205, terminal, glass_fuse, terminal block, terminals, thingiverse, fuse, Electronics, post,...
5
5.0
Mar 3, 2021
03/21
by
Mark Norton (UKCD)
data
eye 5
favorite 0
comment 0
A QUICK & SIMPLE 20MM CONDUIT BRACKET TO HANG FROM TRAY WORK
Topics: conduit, thingiverse, EMT_CONDUIT, 20mm, stl, 3D Printing
9
9.0
Apr 28, 2021
04/21
by
Joshua Kendrick (joshuarkendrick)
data
eye 9
favorite 0
comment 0
All I did was design this bulb assembly for the Aviation Inspired Lamp. I have included pictures so that it can be viewed as components are assembled.
Topics: thingiverse, stl, led bulb, Hobby, 20mm star led
2
2.0
Jun 10, 2021
06/21
by
Erik Yaki (Pyro3D)
data
eye 2
favorite 0
comment 0
Print in VASE mode with .6 to .8 width and it will be extra strong! (.4 works) designed to print and fit into any 20MM shell, should require no sizing.
Topics: balistic, 20mm, Vulcan Cannon, Props, IYAAYAS, PGU, thingiverse, ammo, tip, stl
4
4.0
Jan 6, 2021
01/21
by
Kristian Reinhart (CabbitCastle)
data
eye 4
favorite 0
comment 0
README ==================== I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and
Topics: twenty, 20mm, 19.9_mm, saw, anti_slip, lever, set, woodworking, sawing, bench, 96_mm, cam, festool,...
4
4.0
Apr 12, 2021
04/21
by
Corster Sharp (corstersharp123)
data
eye 4
favorite 0
comment 0
It's a cube that is exactly 20mm x 20mm x 20mm
Topics: thingiverse, stl, 3D Printing Tests, 20mm_cube
4
4.0
Mar 31, 2021
03/21
by
Elijah French (elijahf111)
data
eye 4
favorite 0
comment 0
A pellet rifle sound moderator for the .177cal Gamo varmint. prints all at once with no supports and minimal cleanup. no assembly required will not work with any firearm, is only able to resist the forces of a pellet gun i found that this did quiet the air rifle, although the sonic crack of the pellet was still quite loud due to the light weight 7.4 grain pellets im using have not tested v3, should work fine but not sure if its better than v2 I'd love to hear some feedback if you try it out
Topics: moderator, 2020, thingiverse, silencer, Sport & Outdoors, supressor, air_gun, 20mm, sound,...
3
3.0
Mar 2, 2021
03/21
by
Mike Tong (BigMrTong)
data
eye 3
favorite 0
comment 0
20mm Scaled and sized Zombies for use as undead or ghouls etc in Gaslands or Darkfuture Variations, including female zombie available on my Patreon ..... ---------------------------------------------------------------------------------- Support Patreon : https://www.patreon.com/bigmrtong Patreon Preview : https://tinyurl.com/bigmrtong Everything included to everyone no monthly packs https://eu.banggood.com/custlink/DvmmgvQ25y
Topics: wargaming, thingiverse, undead, 15mm, 20mm, wargame, mini, fantasy, figure, post-apocalyptic,...
3
3.0
Jun 20, 2021
06/21
by
Mike Tong (BigMrTong)
data
eye 3
favorite 0
comment 0
Ganger in Bugger for use in 20mm / 1:64 scale games like Dark Future and Gaslands etc ... Split version, moreposes plus infantry and drivers / gunners here : ------------------------------------------------------ Support Patreon : https://www.patreon.com/bigmrtong Patreon Preview : https://tinyurl.com/bigmrtong Everything included to everyone no monthly packs https://eu.banggood.com/custlink/DvmmgvQ25y
Topics: fantasy, thingiverse, wargaming, buggy, FWW, wargames, post-apocalyptic, gaslands, space, 20mm,...
2
2.0
Jun 6, 2021
06/21
by
Mike Tong (BigMrTong)
data
eye 2
favorite 0
comment 0
Cultists in Buggy for use in 20mm / 1:64 scale games like Dark Future and Gaslands etc This is using several of my accessory option parts as pictured and fits all my drivers for my gangs .. ... Split version, moreposes plus infantry and drivers / gunners here : Support Patreon : https://www.patreon.com/bigmrtong Patreon Preview : https://tinyurl.com/bigmrtong Everything included to everyone no monthly packs https://eu.banggood.com/custlink/DvmmgvQ25y
Topics: turret, Games, enmgine, mini, wargames, thingiverse, 1/64, gun, 20mm, stl, wheel, fww, gang, buggy,...
6
6.0
movies
eye 6
favorite 0
comment 0
Aggregates are inert granular materials such as sand that, along with water and portland cement, are an essential ingredient in concrete. 20 mm Aggregates are mainly used in ready mix concrete, asphalt/bitumen/concrete roads base and sub-base course, pavements, separately or mixed with other aggregates depending on the application.We offer durable 20mm aggregate with higher compressive strength and low permeability. For more information please read more : https://doctorsand.com/20mm-aggregate .
Topic: 20mm aggregate
5
5.0
Apr 12, 2021
04/21
by
Trinita (trinita)
data
eye 5
favorite 0
comment 0
20mm aluminium extrusion end cap
Topics: thingiverse, 20mm, Profile, Abdeckung, cover, stl, Aluminium, Extrusion, 3D Printer Parts, Profil
10
10.0
Apr 28, 2021
04/21
by
Jammin JRok (Jabird73)
data
eye 10
favorite 0
comment 0
90 degree angle. Its multipurpose, can be used for furniture tops or it can be used for aluminum 20mm corners. the choice is yours, many more uses im sure. your imagination is the limit. 2 designs are included one for button heads, the other is countersunk for standard 82 degree
Topics: furniture, thingiverse, angle, 20mm, stuff, 90_degree, mendel90, 2020_extrusion, 2020, stl,...
3
3.0
May 20, 2021
05/21
by
Kristian Reinhart (CabbitCastle)
data
eye 3
favorite 0
comment 0
If you need any other types of bench dogs / stops / clamps or the like or have some neat ideas, drop a comment and I'll see what can be done. A while ago I made a super nice mobile work bench heavily inspired by the Stanton Bench which is in turn inspired by the Festool MFT system. It's basically a ~18mm / ~3/4'' thick top with a bunch of 20mm holes in a 96mm pattern which a variety of tools and attachments can be used with to attack / secure pretty much anything to safely work with. A major...
Topics: thingiverse, dog, locking, mft, mft_dog, stl, stop, set, cam, woodworking, 20mm, lever, bench, Hand...
3
3.0
Jan 7, 2021
01/21
by
Keith Kelly (keith204)
data
eye 3
favorite 0
comment 0
# Basics * Has a 0.26" hole for using 1/4" bolts * **Why?** I use them to hold flex arms, lights, cameras, mics, etc. # Parts & Supplies *These are affiliate links. Buying yourself something nice is a great way to say "thanks." As an Amazon Associate I earn from qualifying purchases.* * 20mm Brad Point Drill Bit # Print Recommendations * Nothing fancy. I used PLA at 0.2 layer height, 3 walls, 25% infill. If you're using it in the workshop, make it beefier # What the?...
Topics: Parts, wudd, workbench, stl, 20mm, mfslab, adapter, desk, thingiverse, keithstestgarage, bench_dog
4
4.0
Jun 6, 2021
06/21
by
Kim Gush (Kimlg)
data
eye 4
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:3680211 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3680211
Topics: cube, 3D Printing Tests, thingiverse, 20mm, stl, customized
6
6.0
Mar 17, 2021
03/21
by
Gillen Howarth (Hazardous3D)
data
eye 6
favorite 0
comment 0
Just made this to test a functioning screw for tolerance + the 20mm block for step calibration(not its main use). Problem? Let me know! I may not have printed it yet ;)
Topics: block, block and screw, screw, stl, test block, 3D Printing Tests, thingiverse, 20mm
8
8.0
Apr 17, 2021
04/21
by
Arthur von Wilcke (Arthurvw)
data
eye 8
favorite 0
comment 0
Great 20mm Calibration Cube -Print it -Measure it (exactly, you get something like 20.1 mm) -Divide 20.0(expected value) by 20.1 (actual value) -Add that number in your slicer as "extrusion multiplier
Topics: 20mm, 20mm_cube, 3D Printing, 2mm, calibration cube 2mm, calibration_cube, 2mm cube, thingiverse,...
4
4.0
May 1, 2021
05/21
by
Chris Adams (that_adams_guy)
data
eye 4
favorite 0
comment 0
I tend to print calibration cubes when I get new rolls of filament or when I'm testing out other ideas like multi-color prints. I don't like to throw them away, and didn't like any of the other cube storage options I've found so far, so I created this 5x5 stackable cube tray to store/display my cube collection. You shouldn't need to scale this by 1 or 2 percent as I've already baked that into the model to allow for tolerance/variance of cubes. I recommend printing in the current orientation. If...
Topics: stl, calibration, 3D Printing Tests, test, 20mm, cube, printer_calibration, thingiverse
4
4.0
May 1, 2021
05/21
by
Dee Talks (DrYM)
data
eye 4
favorite 0
comment 0
I found most of the calibration cubes available here to have such huge X, Y, Z markings, Usually I felt that will cause for inaccurate readings. specially since I use an "outside micrometer" and not a caliber, and hitting the dead center on the text, is just... not gonna work for me. so this one has small markings, offset to the top right, to give me lots of room to take my readings. I hope someone else that uses an outside micrometer finds this useful.
Topics: stl, calibration, 3D Printing Tests, 20mm, calibration_cube, calibration_test, cube,...
10
10.0
Jan 14, 2021
01/21
by
(joostan)
data
eye 10
favorite 0
comment 0
Thought I would design a clamp and clip for camping poles should you need to change the initial purpose or lost an adapter.
Topics: thingiverse, Sport & Outdoors, stl, clamp, pole, camping, 20mm
10
10.0
Jan 18, 2021
01/21
by
Paul Tibble (Paul_Tibble)
data
eye 10
favorite 0
comment 0
20mm Conduit 30 & 60 degree Tee. Designed with a very small footprint (please see photos for dimensions). 20mm conduit is a snug fit within the connectors. Great for strengthing a right angle (see photo). Another in my range of 20mm conduit connectors. Please comment what you think about this connector, and let me know if there are any other connectors that you'd find useful.
Topics: conduit, thingiverse, DIY, stl, 20mm conduit
2
2.0
Apr 19, 2022
04/22
by
Danil Chatuncev (XDenasdc)
data
eye 2
favorite 0
comment 0
Remixed to only have one closed side
Topics: Parts, thingiverse, 2020, 2020_extrusion, bracket, 20mm, corner, stl, angle
