3
3.0
Mar 13, 2021
03/21
by
Ross Pirtle (hhbronx)
data
eye 3
favorite 0
comment 0
Designed these for a friend of mine who needed replacement parts. Hope they are helpful
Topics: stl, thingiverse, Parts, 3M_Respirator
3
3.0
Apr 3, 2021
04/21
by
Peter Schmelcher (peter120)
data
eye 3
favorite 0
comment 0
A two part filter design intended to increase the filter surface area. More effective filtering media has greater resistance to air flow and by increasing the filter area it easier to breath. April 9 2020: added a reusable threaded cage to hold the filter edges closed. Scale the bolt to create a little more nut clearance like 0.9975 The adapter thread is M32x1.5 DIY solution if you can't get standard 3M filter cartridges. This adapter allows me to attach other filter media to my 3M mask...
Topics: thingiverse, respirator, Tools, stl, 3M_Respirator
3
3.0
Apr 4, 2021
04/21
by
Bela Durucz (thedeveloperguy)
data
eye 3
favorite 0
comment 0
I had a long-running debt for the community: I made a halotherapy mask 2 years ago and I used a 3M mask as a base and had to buy original filter cartridges. Howto is here: https://www.instructables.com/id/Halotherapy-Mask/ But sacrificing a totally new filter cartridge is waste. Long story short: the covid-19 pandemic came and I ran out of paper masks, so HAD to make a 3M bayonet compatible custom filter. I already tested it, 4 layers of industrial filter fits great. ~4 hours of print time per...
Topics: thingiverse, Parts, respirator, stl, 3M_Respirator
2
2.0
Sep 14, 2021
09/21
by
Gabriele Russo (gabry96)
data
eye 2
favorite 0
comment 0
screw cap to plug one or both the air inlets of a 3M 6000 series respirator. USE CASES EXAMPLE: A) you want to use just one filter on one side and so you need to plug the other side * B) you need to store the respirator without the filter and don't want dust to come in inlet C) you want to test if the mask has a good fit or if it's leaking air * *if you use this cap to actually cap one inlet during use or to cap two inlets for test you need to make sure the cap are air tight. Print them at 100%...
Topics: stl, thingiverse, Tools, cap, 3M_Respirator
4
4.0
Mar 15, 2021
03/21
by
Monroe Williams (TheObstacle)
data
eye 4
favorite 0
comment 0
This adapter snaps into the back of the ResMed C9 in place of the built-in filter retainer, and allows you to attach a respirator filter compatible with the standard 3M bayonet cartridge mount. I had the idea for this last summer, when we had historically bad air quality due to nearby wildfires. I was wearing my 3M respirator mask (even inside the house) most of the day due to the smoke, but I sleep with a CPAP, and the CPAP's built-in filter is minimal at best. The two STL files differ in the...
Topics: thingiverse, 3M_Respirator, Other, ResMed, CPAP, stl
40
40
texts
eye 40
favorite 0
comment 0
3M Air Mate User Instructions
Topics: Medical Support Equipment, Respirator, 3M Respirator
2
2.0
Apr 20, 2022
04/22
by
congnitive shadow (kelsier)
data
eye 2
favorite 0
comment 0
Thanks for Robagon's nice design! One of the pain for the N95 style mask, that has 2 over head elastic band is it is not easy to wear and the thin band can get not comfortable after long time wearning it. This is essentially the same as Robagon's design, its just I skipped the mask clip and the elastic band tidy part, as most N95 style mask already have the right kind of elastic band. Also I modified the design for the head strap connection a bit, so it hold the 2 half of strap together more...
Topics: thingiverse, stl, Other, 3M_Respirator, n95_mask
4
4.0
Apr 4, 2021
04/21
by
Hongyi Jiang (EyePowerSenpai)
data
eye 4
favorite 0
comment 0
This is an empty board with a socket compatible with MMM-6898 lens. With no function added, fly your imagination and add the functions you need. That will be a good chance to practice engineering and... well, USE AT YOUR OWN RISK since it's not certificated. NO COMMERCIAL USE, since 3M will not be happy about it, otherwise you are just providing ideas as usual.
Topics: thingiverse, Engineering, education, tool, stl, 3M_Respirator
5
5.0
Mar 10, 2021
03/21
by
Brooks Dillahunty (Bdillahunty)
data
eye 5
favorite 0
comment 0
This is an adapter for 3M half-mask and full-mask respirators with the standard "bayonet" style connector. This allows you to use the 5n11 style replacement filter media instead of the expensive and hard to find cartridge style. This is typically done with a 3M 603 adapter and 3M 501 filter retainer (which is compatible). Both are very hard to find currently. I modeled this after a 3M 603 adapter that I already own, and can confirm that it fits. The 501 style retainer may need to be...
Topics: stl, thingiverse, 3M_Filter, 3M_Respirator, Tools
4
4.0
Jan 6, 2021
01/21
by
Zhichao Lei (ZhiL)
data
eye 4
favorite 0
comment 0
I created this adapter to connect my Bullard air supply hose to my 3M 6700 respirator. The 3M has a DIN40mm in the front, so it was just a simple matter of adding NATO DIN 40mm threads to one end of an elbow and a receiver end to accept the 37.2mm outer diameter supply hose.
Topics: Other, stl, Bullard, NATO, 3M_Respirator, thingiverse
4
4.0
Jan 9, 2021
01/21
by
Josh (spaceman_josh)
data
eye 4
favorite 0
comment 0
This is a clip to hold the top strap of 6000, 6500, and 7500 series respirators. (This was designed using measurements from a 6500 series, no guarantee of fit. 1.4 mm x 12.6 mm strap measured). If you're using your respirator for COVID protection this will make you look like a normal paranoid person instead of an idiotic paranoid person with the strap flapping around on top of your head. But it does work very well.
Topics: thingiverse, stl, respirator, 3M_Respirator, Accessories, strap
3
3.0
Apr 4, 2021
04/21
by
Lex Ra (Lehs)
data
eye 3
favorite 0
comment 0
Add in filter for https://www.thingiverse.com/thing:4259060 3M COVID-19 Face mask Respirator" by DASCAT In-Out inner stuff
Topics: thingiverse, filtermask, stl, Other, Facemask, 3M_Respirator
3
3.0
Jan 7, 2021
01/21
by
Matthew Fallshaw (mattfallshaw)
data
eye 3
favorite 0
comment 0
I bought a 3M 6000 series full face respirator. It's great, but obviously not compatible with my spectacles. So I looked for the spectacle kit that I was sure would exist… http://web.archive.org/web/20201202214246/https://www.winc.com.au/main-catalogue-productdetail/3m-6878-spectacle-kit/25042148 A$243.00 ?! And it's just a bent piece of wire and a couple of injection moulded parts. Total manufactured cost couldn't be north of $5. Hunting around I could get it for A$180… but that's still...
Topics: stl, P100, spectacles, 3M_Respirator, Facemask, thingiverse, DIY
5
5.0
Mar 13, 2021
03/21
by
Ricky Griffin (SilkyChicken)
data
eye 5
favorite 0
comment 0
With Approval from Gambody I Give you Immortan Joe's Mask that can accept 3M 30mm Filters! I scaled the mask to fit my big face. I supplied a version to let you scale it to your face without altering to size of the 3M adapters. DO NOT PRINT THE "MASK FOR SCALE ADJUSTMENT" WITHOUT MERGING THE "3M FILTER ADAPTERS" FIRST!!! IT WILL BE A WASTE OF TIME AND FILAMENT. I hope you like it!!! Here is the link to all 4 masks from Gambody:...
Topics: thingiverse, Immortan_Joe, mask, 3M_Respirator, Props, stl
2
2.0
Apr 30, 2021
04/21
by
Robert Maguire (hero21b)
data
eye 2
favorite 0
comment 0
A remix to adapt a 3M 7500 series mask to exhaust into 5/8 hose. Not many people will need this I wager, but here it is. Print and use at your own risk, I have done no flow calculations.
Topics: stl, 7501, 3M_Respirator, DIY, 7502, 7503, thingiverse
2
2.0
Jan 17, 2021
01/21
by
Ben Tsang (iambt1999)
data
eye 2
favorite 0
comment 0
I made it for personal use and practicing. Please feel free to download. Designed for Shigematsu TW08SF Respirator. Since I found that the plug can be rotated by hands, there is no need to design left and right respectively. Print and use it for your own risk. I take no responsibility if you inflected by the Wuhan plague. No commercial use please. Changed from V2: - Removed the cover at the bottom - Easier to plug in - Lighter - Tighter - Shorter - Rounded those corners - Less support - Easy...
Topics: TW08SF, shigematsu, thingiverse, 3M_Respirator, 3D Printing, stl
3
3.0
Apr 21, 2021
04/21
by
HS Lim (limhueysing)
data
eye 3
favorite 0
comment 0
Collaboration with Juan Manuel Aguilar J in making a internal filter for 3M ff400 re-usable respirator. (photo from Juan Manuel Aguilar J) Please note that no filter is needed for the speaker diaphragm. Disclaimer: Use at own risk
Topics: thingiverse, stl, filter, covid-19, DIY, 3M_Respirator
3
3.0
Apr 4, 2021
04/21
by
Rob Harding (charlestondiving)
data
eye 3
favorite 0
comment 0
Blank adapter for 3m respirator.
Topics: thingiverse, PAPR, stl, Other, covid-19, 3M_Respirator
3
3.0
Apr 5, 2021
04/21
by
00 ii (00i)
data
eye 3
favorite 0
comment 0
Topics: thingiverse, filter, Parts, adapter, stl, 3M_Respirator, 3mm
4
4.0
Mar 9, 2021
03/21
by
HS Lim (limhueysing)
data
eye 4
favorite 0
comment 0
External filter cover for 3M 6800 reusable full face respirator - Replace the original cover with this one, which can filter expired air (with added filter material) - attached stl has smoothed corner for better appearance Disclaimer: - Use at own risk - Designed this just for fun
Topics: stl, thingiverse, Covid, 3M_Respirator, filter, cover, DIY
3
3.0
Mar 26, 2021
03/21
by
Maciej Jankowski (Vesp)
data
eye 3
favorite 0
comment 0
Replacement clip 3M Mask
Topics: stl, thingiverse, 3M replacement, Replacement Parts, 3M respirator
4
4.0
May 1, 2021
05/21
by
Maker Dude (3DMakerDUDE13)
data
eye 4
favorite 0
comment 0
Made a Adapter for the "COVID-19 respiratory mask with optional backflow valves" to support 3m Filters Printed with 0.2 mm Resolution
Topics: stl, 3M_Respirator, DIY, Facemask, adapter, thingiverse, mask
4
4.0
Apr 24, 2021
04/21
by
John Rios (xero7x)
data
eye 4
favorite 0
comment 0
I ( and some of the nurses I work with) have found that wearing the respirator with a face shield will sometimes cause fogging. We needed a solution to redirect the exhaust from the mask downwards and away from our field of view. I remixed the surgical mask filter for the exhalation valve to allow the air to be vented downwards. I'm new to 3D Design and only got into it as a result of needing to print PPE for myself and my coworkers. If anyone has any improvements feel free to remix as needed....
Topics: 3M_Respirator, stl, Other, thingiverse, 3M6200, 3m_6200, COVID19
3
3.0
Jan 17, 2021
01/21
by
Ben Tsang (iambt1999)
data
eye 3
favorite 0
comment 0
I made it for personal use and practicing. Please feel free to download. Carabiner are credited to @mistertech Basic Carabiner (Easy print) by mistertech September 18, 2017 https://www.thingiverse.com/thing:2539915
Topics: buckle, thingiverse, 3D Printing, 3mm, 3M_Respirator, clips, stl
4
4.0
Apr 4, 2021
04/21
by
Benny lee (bennyleedesign)
data
eye 4
favorite 0
comment 0
A mask with 3M adapters compatible with 6000 series 3M filters, 3M inhalation valves(6000), 3M inhalation port gaskets(6000), and exhalation valve pads(31mm). NOTE: Use txt file to reference the parts to purchase! (i.e. valve port gasket and pads)
Topics: thingiverse, 3D Printing, stl, Facemask, 3M_Respirator, mask
3
3.0
Mar 5, 2021
03/21
by
Derry Hamilton (rasilon)
data
eye 3
favorite 0
comment 0
The spectacle adapter for 3M (style) respirators are a little hard to come by, but as a chemist who occasionally needs them, they're a lot safer than contact lenses. This mount is very similar to the official ones, but can be printed, and thus doesn't involve being annoyed at suppliers. I printed the brackets in PLA, and the frame in TPU. The wires are 1.5mm; I used nitinol since it was to hand, and means they're nearly unbreakable. The frame was designed around the lenses out of an old pair of...
Topics: stl, Parts, 3M_Respirator, respirator, gasmask, 6800, thingiverse
4
4.0
Apr 1, 2021
04/21
by
Nathan Pace (Slowcarton)
data
eye 4
favorite 0
comment 0
3/26 Uploaded a revised base plate, middle piece & cap This is a reusable respirator cartridge with a 3M style fitting. It was designed by an EMT (I modified it to print easier) to help combat their extreme shortage of masks. They and most other first responders are being forced to reuse their masks and he wanted something more sanitary and obtainable. It snaps together tightly but I would recommend medical tape (or tape) as an extra precaution. They fitting was found on here, when I can...
Topics: cartridge, 3M_Respirator, thingiverse, respirator, mask, Other, stl
4
4.0
Jan 6, 2021
01/21
by
Leo Liang (aleung)
data
eye 4
favorite 0
comment 0
The filter area is 50mm x 42mm, double the area of original rounded adapter to make breath easier.
Topics: Parts, stl, 3M_Respirator, thingiverse, surgical_mask, mask
2
2.0
Jan 17, 2021
01/21
by
Ben Tsang (iambt1999)
data
eye 2
favorite 0
comment 0
I made it for personal use and practicing. Please feel free to download. Designed for Shigematsu TW08SF Respirator. Since I found that the plug can be rotated by hands, there is no need to design left and right respectively. Print and use it for your own risk. I take no responsibility if you inflected by the Wuhan plague. No commercial use please. Changed from V1: - Easier to plug in - Lighter - Shorter V1：https://www.thingiverse.com/thing:4532733...
Topics: TW08SF, shigematsu, thingiverse, 3M_Respirator, 3D Printing, stl
2
2.0
Jan 5, 2021
01/21
by
Alejandro Silva (alex830)
data
eye 2
favorite 0
comment 0
3M cartridge electric
Topics: Parts, stl, electric, 3M_Respirator, cartridge, thingiverse, mask
3
3.0
Apr 28, 2021
04/21
by
Dmytro Sotnyk (dsotnyk)
data
eye 3
favorite 0
comment 0
Allows attachment of standard 40mm NATO filter or 40mm compatible gas mask tube to 3M respirator. In this remix I've made connector to 3M more precise, so it will stay connected securely.
Topics: thingiverse, 40mm, NATO, Adapter, 3M_Respirator, stl, Other
3
3.0
Mar 19, 2021
03/21
by
HS Lim (limhueysing)
data
eye 3
favorite 0
comment 0
Exhalation filter fitted to interior of the 3M 6800 series full face respirator. Self explanatory photos Disclaimer: Used at own risk
Topics: Covid, DIY, filter, thingiverse, exhalation, 3M_Respirator, stl
3
3.0
Apr 4, 2021
04/21
by
Daniel Cruz (LAZERCRABS)
data
eye 3
favorite 0
comment 0
A quick 3M style adapter mean to be used with 3M Respirators. Use to create your own fabric filter cartridges as an alternative to normal fabric masks.
Topics: thingiverse, respirator_filter, respirator, stl, Other, 3M_Respirator
4
4.0
Apr 27, 2021
04/21
by
ClockworkNeko FreeHK (ClockworkNeko)
data
eye 4
favorite 0
comment 0
After observing so many walk by pull down their masks for a smoke, it's easier for the 3M user to change their filter to have a quick smoke or when walk by. > **Warning: ** > this will weaken your protection after replacing the filter with this adaptor. Seriously, if you try to protect yourself from coronavirus, you may also consider **stop smoking** . This is a quick mix of the following thing Thanks for both author for their work https://www.thingiverse.com/thing:2135334...
Topics: thingiverse, filter, Gadgets, joke, coronavirus, 3M_Respirator, stl
2
2.0
Apr 5, 2021
04/21
by
olivier godio (OliverPterodactyl)
data
eye 2
favorite 0
comment 0
1st ever version of my 3M like masc foldable. It can be usefull for all sort of things. I have designed it and printed, it tooks 12 prototypes to finalize. All you need is elastics and scissors to adapt it to your face. The model size is big, you can reduce it by 10% maximum in Cura. I will update the STL for smaller versions if requested. I strongly recommand to fill the front filters with cotton or actif-charcoal cotton/filter. It takes 10 minutes to adapt it. The holes grid of the V14_VF is...
Topics: thingiverse, masc, Accessories, stl, covid-19, 3M_Respirator
2
2.0
Apr 19, 2022
04/22
by
Adeel AJ (burgerdeel)
data
eye 2
favorite 0
comment 0
Remixed this to remove the lock and make it at an angle to avoid supports
Topics: thingiverse, 3M_Respirator, stl, Other, 7500, 3M_7500
3
3.0
Apr 13, 2021
04/21
by
Juan Carlos Perdigón González (Jcperdi)
data
eye 3
favorite 0
comment 0
Filtro sustitutivo de marcarilla con rosca tipo 3M. La mascarilla que compré traía un filtro enorme, para gas, y no reutilizable. Este diseño es menos voluminoso, y reutilizable con filtros hechos por ti mismo. Puedes utilizar filtros de carbono activo, discos desmaquillantes, tanto de bambú como de tela y/o algodón u otros filtros hechos con mascarillas quirúrjicas(menos recomendable). Los discos que uso son de 8cm. de diámetro, pero se pueden utilizar de 6cm. El diseño esta compuesto...
Topics: thingiverse, filter, stl, covid-19, Other, 3M_Respirator
3
3.0
Jan 16, 2021
01/21
by
EugeneGTI (S2Inc)
data
eye 3
favorite 0
comment 0
Having worn one mask already I thought there should be a better way to extend their life and add some much needed humor around me. Enter the mustache magnetique, in revolutionary orange colour by Maker Series PETG USA. There is a hollow space inside for 20mm 5 x 5 magnet. Just place a pause in a slicer, put the magnet in, and resume printing. The mustache clicks firmly onto the exhale valve of the mask. Now the mask is in the fridge, and probably it would be possible to find a magnetic spot in...
Topics: moustache, N95, thingiverse, n95_mask, Accessories, 3M_Respirator, stl
3
3.0
Jan 5, 2021
01/21
by
DAVE MAC (DTMCPARTLAN)
data
eye 3
favorite 0
comment 0
directs breath downwards for 3m 6000 series respirators
Topics: Accessories, stl, 3m 6000, respirator, thingiverse, 3M_Respirator, exhalation
7
7.0
Jun 20, 2021
06/21
by
Mussy (mussy)
data
eye 7
favorite 0
comment 0
Yet another cool Gas Mask / Respirator but this time it has double purge valves. Assembly Instructions: 1)Glue the Body to the Mouth piece & Filter Adapters. 2)Wrap elastic bands arround the Adapters to stop air from leaking 3)Insert 2 X 6mm BB's one each in the purge valve holes in the body. 4)Press fit the Purge Valve Covers to the Body. * Items Required: 2 X Air-Soft BB's Snorkel Mouth Piece:...
Topics: Tools, snorkel, NSFW, thingiverse, gas mask, stl, 3M Respirator
4
4.0
Apr 1, 2021
04/21
by
moe moe (moe_moe)
data
eye 4
favorite 0
comment 0
male adapter for 3M filters
Topics: 3M_Respirator, thingiverse, adapter, filter, connector, corona, Parts, stl
4
4.0
Apr 5, 2021
04/21
by
HS Lim (limhueysing)
data
eye 4
favorite 0
comment 0
Internal exhalation filter for 3M 7500 series re-usable respirator. Exhaled air now filtered and thus can be used in sterile surgical field. Filter box has an attachment that latch into the hole inside the respirator. Breathing should be easier as the filter area is larger than other external filter adapters for 7500 series published in Thingiverse. Installation as per photo. Disclaimer: Use at own risk
Topics: thingiverse, filter, internal, stl, 7500, Covid, DIY, 3M_Respirator
5
5.0
Mar 15, 2021
03/21
by
Roger Cheng (atst133)
data
eye 5
favorite 0
comment 0
Proper use of an elastomeric respirator in a medical setting requires that the exhaust port be filtered to prevent contamination/exposure from the user's exhaled breath. Due to the shape and location of the 7500 series' outflow port, placing a surgical mask over the port can be hit or miss, and I was unable to find an adapter design on Thingiverse that fit all my requirements, those being: 1. Large as possible filter area to reduce exhalation back-pressure (pops open the seal, becomes fatiguing...
Topics: thingiverse, 3M_Respirator, 7503, filter, 7502, stl, Tools, 7501
6
6.0
Mar 18, 2021
03/21
by
Zack (Horvaticus)
data
eye 6
favorite 0
comment 0
Hey folks, I recently lost my female loop for my 3M respirator and did a remix of another one I found on here because it seemed easier than actually looking for it. Locks up acceptably well and holds on to the elastic better than the original. Will do the male part if I lose that one too :) EDIT: I updated this to include a mating male adapter, and an updated female adapter as well! Worked decently enough in my testing, hope it works for you too! Could also work with standard 1/8" elastane...
Topics: clip, mask, gas, stl, thingiverse, 3M_Respirator, DIY, respirator
4
4.0
Jul 3, 2021
07/21
by
F A (Soundless)
data
eye 4
favorite 0
comment 0
3M compatible dust filter cover
Topics: 3M_Respirator, Parts, dust_filter, thingiverse, stl, dust_cover
4
4.0
Apr 27, 2021
04/21
by
Michel Jasmin (MichelJ)
data
eye 4
favorite 0
comment 0
In the middle of the Coronavirus crisis people are buying toilet paper like crazy and we don't know why. So I made an adaptor to let the people use their TP with a 3M respirator mask. This won't save your life and obviously if you didn't notice THIS IS A JOKE . I printed it in PETG as it is best for snap fit things. I'm planning to create a plug you can place at the other end of the roll. With it in place it will help you die faster. Best advice: WASH YOUR HANDS ! Update 2020-03-16: See my...
Topics: thingiverse, Tools, mask, coronavirus, 3M_Respirator, stl, respirator, Protection
3
3.0
Apr 2, 2021
04/21
by
Adam Smith (Asmith152)
data
eye 3
favorite 0
comment 0
I added the filer end so that you can use the 3M filter.
Topics: Automotive, 3M_Respirator, thingiverse, respirator, covid-19, COVID19, stl
3
3.0
Mar 19, 2021
03/21
by
(AgapeModeling)
data
eye 3
favorite 0
comment 0
AOSafety® R5700 8051 Bayonet to 3M™ Bayonet Adapter ====================================== A prototype design for AOSafety® R5700 8051 bayonet to 3M™ bayonet adapter intended to bring this old half face respirator back to life. AOSafety® was sold to 3M™ in 2007, and no longer produces this half mask respirator and filter cartridges. Was popular during time frame as many hardware stores, and some construction crews may still have them. To bring it back to life, I conceived the following...
Topics: Parts, filter, thingiverse, adapter, 3M_Respirator, bayonet, respirator, stl
4
4.0
Jun 7, 2021
06/21
by
Arya Rashidi (ThaFlash_LA)
data
eye 4
favorite 0
comment 0
The Cover-Inhalation Port, Gen 4 (CIP-Gen4) is a bayonet cap that will shut off one of the two inhalation ports on the 3M 6000 series half face respirators. Given current circumstances affecting the world, PPE, and especially respirators have quickly become high need items that are in limited in supply. While there are better gas masks and tactical respirators, the 3M 6000 series half face respirators are extremely common and many people already own one in their workshop. Made from silicone,...
Topics: 3M_Respirator, respirator, N95, Tools, filter, thingiverse, ppe, stl
4
4.0
Apr 1, 2021
04/21
by
Kenny Tsui (Kty75)
data
eye 4
favorite 0
comment 0
This is custom made mask adapter of 3M 3200 respirator . cut a 5cm diameter circle from a surgical mask for inter filter.
Topics: 3M_Respirator, thingiverse, Parts, 3200, respirator, respiratory_mask, stl
