7
7.0
Jan 22, 2021
01/21
by
T. Kenson (T__K)
data
eye 7
favorite 0
comment 0
"Anarcho" is a 100% 3D-printed slingshot, made from PLA and TPU. "TPU" in my cse is filaflex and the other a noname PLa. If you assemble this, you might need a chopstick / toothpick to get the T-parts through the holes. Use those "stoppers" to prevent them from slipping through again (melt both ends get them to stick together to form a small counter ring). And as always.....: !!!Print and Use this at your own risk !!! !!! Don't use it to shoot each other !!!
Topics: fully_printed, futterzwille, anarchy, fishing tools, stl, slingshot, thingiverse, plug, zwille,...
23
23
Mar 13, 2021
03/21
by
Dom Le (Lustprint)
data
eye 23
favorite 0
comment 0
EN: This is a gothic / celtic inspired handcuff. Although designed for Bondage use, of course this cuff can be used as well for costume and cosplay purpose. I made 2 file versions: one with clean material and one with a displacement on the "metal" parts, because I like them a bit old and worn out. The scale is made to fit an average female wrist, it has a width of 6cm in the middle & 5.5cm at the opening and the surrounding volume has a depth of 2.5 cm from the rope-eyes (which...
Topics: hand, BDSM, thingiverse, Cuff, Sexy, bracelet, 3D_printed_sextoys, Sextoy, wristband, handcuff,...
3
3.0
Jun 11, 2021
06/21
by
(rgproduct)
data
eye 3
favorite 0
comment 0
Summary Simply connect the special modular elements in any order you like to make bracelets, necklaces, loops and strands...decorations etc... Print any colour combinations you wish to support team, country & company etc. Designed to be secure, using the print striations as a side grip and the physical form as a self locking connection. Print with edge to print bed. Simple, endless variety easily customised. Enjoy!
Topics: connection, join, christmas_ornament, combination, clip, jewellery, joint, ankle, thingiverse,...
8
8.0
Apr 22, 2021
04/21
by
Laszlo Paszka (plaszlonet)
data
eye 8
favorite 0
comment 0
https://www.youtube.com/watch?v=XnAsO8CUk4E Printed whit 0.3 nozzle at 1.2 shell 15% infill at 0.2 height, pla at the moment, the aluminium tubes 16 mm diameter the mounting holes for the screws m5 and m4, on the canopy used m4 for the arms used m5 type D nuts for wood screw in, heat them up a bit then just fillet them into the plastic (try on something else first) attention the m4 ones are zinc so if you over heat them they melt :)...
Topics: DIY, custom drone, 3d printed, Quadcopter, quad, stl, thingiverse, Drones, dji_naza
2
2.0
Jan 8, 2021
01/21
by
Kevan Hosein (kevan_h)
data
eye 2
favorite 0
comment 0
I use solder with lead and breathing those fumes can be deadly. So i started looking for a great fume extractor. I came across the "Minimalist 3D Printed Fume Extractor" by rdmmkr but i didnt want to solder the components without an extractor so i came up with this design of a Solder Free version based off rdmmkr's original design. list of changes i made Body: ➢ 38mm fan section needed to be widened to 38.5 ➢ AC adaptor and wire holes were closed ➢ Hole for power...
Topics: fume_extractor, diy, soldering, solder_fumes, lead, DIY, soldring, jewelry, abs_fumes,...
357
357
Apr 26, 2013
04/13
by
RnD Media Labs
audio
eye 357
favorite 0
comment 0
A question from our good friend SHIFT! sent us on a whirlwind adventure through the philosophy of 3D printing. When we finished with his questions, we figured we'd just keep the 3D question coming with some forum entries I found over at Shapeways . You can find resources for this episode at rndmedialabs.
Topics: how do i?, brainstorming, projects, 3D Printed Guns, 3D Printing, Vacuum forming, Mold Making
6
6.0
Apr 17, 2021
04/21
by
Mike W (MikeyDubbs519)
data
eye 6
favorite 0
comment 0
Really wanted some Bioshock plugs so here we are. I will be doing the rest of the vigors from Bioshock Infinite. If anyone has requests i would gladly do them as well. These are currently for 1/2 Inch but can be scaled up or down depending on your size
Topics: ear_plug, Bioshock_Infinite, bioshock, thingiverse, ear_gauges, earring, stl, Earrings, jewellery,...
7
7.0
Jun 20, 2021
06/21
by
Mark Dashnaw (markdash)
data
eye 7
favorite 0
comment 0
Won't be able to test print this for a while, so here it is for anyone to give it a shot
Topics: stl, thingiverse, Hobby, 3d printed train
5
5.0
Jan 21, 2021
01/21
by
daniel V (Completedesign)
data
eye 5
favorite 0
comment 0
This is a 1/64 scale Hay wagon. it prints in 15 pieces so you will need some glue to put it together. You will also need one small piece of copper and a small nail to attach the tongue of the wagon. if you have any questions or tips please write a comment.
Topics: 1/64, 164_scale, stl, thingiverse, cura, ertl, 3D_printing, tronxy, scale, tronxy P802MA, fusion...
0
0.0
Apr 20, 2022
04/22
by
Fraens (Fraens)
data
eye 0
favorite 0
comment 0
Here I present 10 electrical 3D printed projects. All projects have to do with coils in some way. Youtube: https://www.youtube.com/watch?v=WlzmuZM7A-o&list=PL9Jzxu1vDldPy2bK8hG3s78jLnHpclBQm
Topics: thingiverse, 3D printed ideas, Ideas, 3d printed generator, 3d printed motor, perpetuum mobile,...
6
6.0
Apr 17, 2021
04/21
by
rbain machado (Zink_)
data
eye 6
favorite 0
comment 0
Using my past Omni Wheel design, I created an X-Drive robot with 12 - 130 Size motors so nearly anyone can build this for cheap. Simply print all the parts, get 12 motors, wire it up and you are good to go!
Topics: x drive, wheel, thingiverse, omni, 100% 3D Printed, Robotics, stl, 100%, printable, robot, 100% 3D,...
4
4.0
Mar 5, 2021
03/21
by
Iván Teruel (ivant_electronics)
data
eye 4
favorite 0
comment 0
This design is about a replica of a real dulzaina. The final object is fully 3D printed (excepting the reed and tudel) and fully functional. It consists in 3 separated parts which have to be glued, preferably, with cyanoacrylate, at least in this first version.
Topics: stl, 3D_printing, musical_instrument, Spain, Music, reed_instrument, pipe, 3d_printed, prusa_i3,...
3
3.0
Jun 10, 2021
06/21
by
Nathaniel Anderson (nath1981)
data
eye 3
favorite 0
comment 0
This stand is designed to hold a small DC/DC converter to adjust the fan speed. 120mm fan makes a great desk top fan. Got the fan grill from thing:377600
Topics: 120mm_fan, 120mm_fan_stand, box, Office, Variable_Speed_Controller, Fan, fan_stand, create,...
3
3.0
May 1, 2021
05/21
by
Brent Lemon (22lemonbr)
data
eye 3
favorite 0
comment 0
This Nerf Elite dart magazine is an extended version. It should hold 14 darts, but it might only do 13 depending on the spring materiel. All of the parts are possible to print in a 220x220x250 print volume. This design requires 2 M3 nuts and bolts, but it can be held together with other screws. Just find one you think might work, and maybe widen the holes with a drill to accommodate. The magazine will run a little bit smoother if you print the shuttle and body at a lower layer height. To...
Topics: Nerf_Mod, nerf_caliburn, Toy & Game Accessories, Nerf_Magazine, bullets, replacement, prusa,...
7
7.0
Jan 18, 2021
01/21
by
Drew Kraebel (Drew_Kraebel)
data
eye 7
favorite 0
comment 0
This a reversible hinge designed to be used as part of a post-curing cabinet for SLA UV active resin. The hinge prints in place as one piece but is held together with detents so in order to use it you need to separate the two parts then put it back in the other way so it sits flush to the OpenBeam. The hinge was initially meant for gluing to a 3mm sheet of Lexan (hence the notch) but you could glue it to just about anything. This part was designed for use with M3 screws. It was printed on a...
Topics: 3d_printed, Engineering, thingiverse, openbeam, hinge, openbeam1515, stl
9
9.0
Jan 12, 2021
01/21
by
Cooper Lytle (CooperLytle)
data
eye 9
favorite 0
comment 0
I made this spinner because I was too lazy to go buy bearings so here you can print them yourself! IMPORTANT: In order to have a good experience you must put pennies in the spinner and lubricate it with something. I used Silicone spray and it spins great, not as well as a real bearing spinner but pretty good for being 3d printed. Also! i would recommend printing the balls separate in case they come off the bed and destroy the print.
Topics: Mechanical Toys, spinner, thingiverse, no_bearings, stl, zortrax, featured, penny, fidget spinner,...
4
4.0
Jan 17, 2021
01/21
by
rhys davey (Radex141)
data
eye 4
favorite 0
comment 0
remixed for someone but they didnt want it in the end so im uploading them. 1911 airsoft grips
Topics: 3D_printed_grips, airsoft grips, grips, airsoft_accesories, airsoft, thingiverse,...
2
2.0
Mar 21, 2021
03/21
by
Andrew Masse (PartsDesigner)
data
eye 2
favorite 0
comment 0
This is my re-envisioned 1946 Delage DS6 I will be modeling its sister car in the near future. I believe this will be one of my best models but then I have put more than 72 hours into its modeling in SolidWorks. When finished I will post it here so that it can be downloaded. If there is a model of car you would like to see designed, please feel free to contact me at: drafting@ramdesign.on.ca My other work is posted on my web site: http://www.ramdesign.on.ca/3D%20Models.htm To keep up to date...
Topics: strombecker, 3d_printed, 3D_Printed_Car, stl, 3dprintable, 3D_printing, scalextric, eldon, slot,...
7
7.0
Mar 19, 2021
03/21
by
Brian Cramer (carbonbased)
data
eye 7
favorite 0
comment 0
These are a set of replacement panels for the stock interior panels that cover the tail light bulbs. The STLs are for both sides, the source file is for the left panel only - just mirror it for the right side.
Topics: 3d_printed, ultimaker, Automotive, thingiverse, automotive, crx, stl
10
10.0
Apr 5, 2021
04/21
by
Maxim St-Pierre (maxsteel333)
data
eye 10
favorite 0
comment 0
ideal for winter and deep sand because of the thread pattern please let me know if you print it i would like to get some feedback
Topics: thingiverse, RC_cars, spikes, R/C Vehicles, wheels, Rc_car, drift, stl, RC, 3D_printed,...
5
5.0
Mar 18, 2021
03/21
by
The BMX Biker (The_BMX_Biker)
data
eye 5
favorite 0
comment 0
This is a RC car drift wheel. I printed both the rims in PLA and both the Wheels with TPU. This print is a great way to start learning how to drift. I had a lot of fun with this and I think you should have a lot of fun with this too!! I recommend you print this. The wall thickness on the rims are 3 mm thick. This wheel is for 1/10th scale RC cars only. The wheels stick out more than the stock ones. I printed this with 50% infill for the rims and 20% infill for the wheels.
Topics: #RC, #Drift Wheels, R/C Vehicles, #Wheels, thingiverse, #RC Cars, Traxxas Rally, #Traxxas Drift...
0
0.0
Apr 20, 2022
04/22
by
Northern Maker (NorthernMaker123)
data
eye 0
favorite 0
comment 0
Thank you for your interest in my model! If you download my design please consider leaving a tip. I am a high school student trying to earn money for college, and I love to work on making new designs. Thanks! Description (2-in-1 air motor/pump working model) Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 50-100% Hardware: 8X m4 or m5 Bolts water/pneumatic fittings water/pneumatic tubing 4 standard skate bearings sandpaper 1X motor body 2X shaft 3X pistons...
Topics: tool, air_engine, all_ages, diy, FunctonalDesign, new, 3d_printed, Kids_Toys, customized, prusa,...
6
6.0
Jan 19, 2021
01/21
by
Jindrich Solar (Gophy)
data
eye 6
favorite 0
comment 0
# Be careful ! Props are bit lower than normal 20xx props, don't short your motor wires ! - I've tried to print it with PLA, durability was pretty good. They very also pretty solid and don't explode on crash. - 3 Blades PRO is difficult do print, maybe try to print it on SLA printer
Topics: 3 holes, props, prop, stl, 1103, brushless, 6 blades, motors, outdoor, thingiverse, spare, 110x,...
2
2.0
Mar 10, 2021
03/21
by
Chris Mower (kintekobo)
data
eye 2
favorite 0
comment 0
I designed and built this as a means to keep an eye on the state of my 3D Printer bed level. To use it, once the bed has been set up and levelled in the usual way the 2-Axis level is placed on the bed and the X and Y screws are adjusted so that the bubbles are centered. The screws are then locked down. If at any time you need to confirm that the bed has not altered simply place the level tester on the bed and observe the bubble. If it is in the center in each then the bed is the same as before....
Topics: 2-Axis Spirit Level, Spirit Level, stl, thingiverse, 3D Printed, 3D Printer Accessories, Tools,...
7
7.0
Jan 18, 2021
01/21
by
Amal Mathew (AmalMathew)
data
eye 7
favorite 0
comment 0
Using 3D Printing to replace or build plug body for 2 pin plug. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1QoPp2UJlr0
Topics: 3d printed plug case, thingiverse, 2 pin plug body, 3D Printing, stl
8
8.0
Jan 16, 2021
01/21
by
Andrew Barney (BioLumo)
data
eye 8
favorite 0
comment 0
This is a remix of my earlier 2.5" External Hard Drive Stand inspired by a stand that came with my old nettop computer. Here is a great way to hold your external 2.5" portable HDD when at home! Great for backing up your files! It is designed so you can turn it sideways and place two of them side-by-side no problem. Enjoy! Let me know if it works! p.s. let me know if the dimensions are ok. This test piece was slightly loose so i modified the CAD file just a bit....
Topics: nettop, USB 2.0, HDD case, external case, stl, external case stand, External_HDD_Dock, thingiverse,...
6
6.0
Jan 16, 2021
01/21
by
Ricky Cheung (chpola33)
data
eye 6
favorite 0
comment 0
Turn your old 2.5" speaker into fashionable. Printed body in one piece and a cover. For more information please visit us http://maxvantageasia.com/max3dPrints/index.html Check out this https://youtu.be/Dl1no7GAJv8
Topics: Audio, 3d_printed, thingiverse, speaker, Speakers, stl
4
4.0
Jun 11, 2021
06/21
by
Martin Lawson (BotLawson)
data
eye 4
favorite 0
comment 0
This print demonstrates a diferental harmonic reducer. It is a two stage strain wave gear train that subtracts the reduction of the two stages resulting in a 2015:1 gear reduction. (and 31:1 for v1b) It uses 17x 6mm spheres for the eliptical ball bearing. Airsoft pellets work well as would 6mm glass, nylon, Delrin, or steel balls. Tolerances are tight so print the included "tolerance check" file first. It's a circular ball bearing that prints quickly, uses 19x 6mm spheres, and should...
Topics: 3D_Printed_Bearing, Engineering, thingiverse, diferential_gear, eliptical_bearing,...
31
31
Oct 8, 2018
10/18
by
wehiird
movies
eye 31
favorite 0
comment 0
Exii Hand Make nashville WEHII R&D East Tower Design Bryan Overby and GarbagePlay Fusion 360 CAD Model Downloaded from Github Some of the 3D-printed parts are explored
Topic: Exii Hand Make nashville WEHII R&D East Tower Design Bryan Overby and GarbagePlay Fusion 360...
8
8.0
Apr 21, 2021
04/21
by
Mohamed AL-ameen (ameen005)
data
eye 8
favorite 0
comment 0
these are 3d printed joints fit 2020 aluminum extrusion profile
Topics: thingiverse, 3D Printer Parts, stl, jointed, 3d_printed
2
2.0
Apr 8, 2021
04/21
by
Phill (Phill_Luland_3D_Printed_Art)
data
eye 2
favorite 0
comment 0
This is the next versions of my face mask saga if you have watched the previous vids you can see my design technique is changing this is still not a practical solution but I am discovering a lot about fusion 360 and hope it inspires you to try out your own ideas
Topics: 3D Printing, 3d printed art, phill luland, stl, thingiverse, Autodesk_Fusion_360, coronavirus, art...
2
2.0
Apr 8, 2021
04/21
by
Phill (Phill_Luland_3D_Printed_Art)
data
eye 2
favorite 0
comment 0
Summary This is the next versions of my face mask saga if you have watched the previous vids you can see my design technique is changing this is still not a practical solution but I am discovering a lot about fusion 360 and hope it inspires you to try out your own ideas
Topics: 3D Printing, 3d printed art, art, design, stl, thingiverse, Autodesk_Fusion_360, Facemask,...
4
4.0
Mar 18, 2021
03/21
by
Dennis Wilson (klnk1up)
data
eye 4
favorite 0
comment 0
Didn't like the fabric sheath and kept getting cut with sword. Designed this one on the fly and shouldn't need supports to print. Prints in 4 pieces that are connectable with an adhesive. Feel free to ask any questions and i'm still printing mine so I will also keep you updated.
Topics: 3d printed tactical, Sword sheat, tactical sword sheath, 3d printed sheath, 3dprinted sword, 3d...
3
3.0
Apr 5, 2021
04/21
by
Ashley (Pink_Iguanas)
data
eye 3
favorite 0
comment 0
A butterfly knife, with a comb for a blade. For those who don't know what a butterfly knife is, you can flip it around. Now with super-thin teeth.
Topics: thingiverse, comb, Household, butterfly_knife, stl, 3d_printed
8
8.0
Apr 30, 2021
04/21
by
Andrew Barney (BioLumo)
data
eye 8
favorite 0
comment 0
I'm not sure really what to call this. This is a stabalizing base for the Dynex brand 3.5" Usb 3.0 external hard drive enclosure. I'm pretty sure i got mine from Best Buy, though they have the same exact model now with the brand name Insignia. I modeled this design off the base for my old [Barebones Foxconn Netttop](https://www.google.com/search?noj=1&site=imghp&tbm=isch&source=hp&biw=1301&bih=654&q=foxconn+nettop+base). The Foxconn Nettop base was super handy and...
Topics: stl, foxconn, Stand, 3d printed stand, Insignia, Computer, nettop, Base, Hard Drive Enclosure, Base...
2
2.0
Jun 10, 2021
06/21
by
Duncan Brown (3DPRINTSANDSTUFF)
data
eye 2
favorite 0
comment 0
I designed another wrench for a 3/8 Hex Nut it works well! If you are looking for a 3/8 wrench I suggest you print this! In the picture It says 5/16 wrench I just accidently put the wrong label on it. IT IS STILL A 3/8 HEX NUT WRENCH!
Topics: wrench, 3d printed tools, thingiverse, handtools, Hand Tools, stl
8
8.0
Apr 30, 2021
04/21
by
Anton Mustermann (anton610)
data
eye 8
favorite 0
comment 0
85mm micro brushless 3d printed quad The idea i got here: http://www.quattrovolante.com/Fabry/product-category/q-carbon85/ This parts http://www.banggood.com/Racerstar-Racing-Edition-1103-BR1103-8000KV-1S-Brushless-Motor-RS6A-V2-BB2-Blheli_S-6A-1-2S-ESC-p-1096932.html?rmmds=myorder&p=J802191191640201502F http://www.banggood.com/Tiny-Frsky-8CH-Receiver-Compatible-With-FRSKY-X9D-Plus-DJT-DFT-DHT-For-QX90-DIY-Micro-Quadcopter-p-1079963.html?rmmds=myorder&p=J802191191640201502F...
Topics: 3D_printed_quadcopter, quadcopter 85, R/C Vehicles, mini_racing_quad, brushless, miniquad,...
6
6.0
Mar 16, 2021
03/21
by
ricardo de koning (giek2000)
data
eye 6
favorite 0
comment 0
I made this watch in 2016 when my partners trusted Casio MQ24 broke and needed a replacement. 2 Years later the watch is still running fine. How is it made? Pretty simple. The guts of the MQ24 fit snug in the case, and the 'glass' is friction fit up front. There are a few protruding 'bumps' on the back of the MQ24s guts which you'll need to push back for the back cover of the watch to fit. I ran a bit of hot glue all around the edges of the back of the watch and pressed the back plate in. The...
Topics: mq24, Jewelry, watch, 3d printed watch, 3d watch, casio watch, clasp, working watch, strap, stl,...
2
2.0
Jan 6, 2021
01/21
by
Gonzalo Chomón (GonzaloChomon)
data
eye 2
favorite 0
comment 0
- INTRODUCTION The Jellybean3D is a fully DIY Open Source 3D printed electric vehicle. Designed to be made with standard FDM hobby printers and easy to find/work PLA, and/or maybe PETG plastic, some small parts printed with PA (Nylon), and some off the shelf components. In order to create the big parts like the body and door, they have been strategically cut on small easy printable pieces that will be glued/welded afterwards. - More info here: https://youtu.be/umWhtFFmUe0 More information...
Topics: stl, Automotive, 3D printed car, thingiverse, 3Dprinted car, Jellybean, 3Dprintedcar
2
2.0
Jan 7, 2021
01/21
by
Gonzalo Chomón (GonzaloChomon)
data
eye 2
favorite 0
comment 0
- INTRODUCTION The Jellybean3D is a fully DIY Open Source 3D printed electric vehicle. Designed to be made with standard FDM hobby printers and easy to find/work PLA, and/or maybe PETG plastic, some small parts printed with PA (Nylon), and some off the shelf components. In order to create the big parts like the body and door, they have been strategically cut on small easy printable pieces that will be glued/welded afterwards. - More info here: https://youtu.be/umWhtFFmUe0 More information...
Topics: stl, JellyBean, printed car, Automotive, thingiverse, 3d printed car, 3dprinted car
3
3.0
Jan 7, 2021
01/21
by
Gonzalo Chomón (GonzaloChomon)
data
eye 3
favorite 0
comment 0
- THIS IS A 1/10 SCALE MODEL OF THE REAL JELLYBEAN 3D The Jellybean3D is a fully DIY Open Source 3D printed electric vehicle. Designed to be made with standard FDM hobby printers and easy to find/work PLA, and/or maybe PETG plastic, some small parts printed with PA (Nylon), and some off the shelf components. Links to the 1/1 Jellybean3D: https://www.thingiverse.com/thing:4667329 https://www.prusaprinters.org/prints/46729 This is a non commercial project borne with my own time and money and with...
Topics: 3D Printed Car, stl, JellyBean, printed car, Automotive, 3Dprinted car, thingiverse
4
4.0
Mar 22, 2021
03/21
by
CHIPER GABRIEL (CNC_EVOLUTION)
data
eye 4
favorite 0
comment 0
THIS IS STEP BY STEP INSTRUCTIONS HOW TO DOWNLOAD AND 3D PRINT A VISE. https://www.youtube.com/watch?v=VNGCw_8lsSA FOR MORE INFORMATION PLEASE SUSCRIBE TO MY CHANNEL http://www.youtube.com/channel/UCDmJjHjKhrH2NYIg21H5f-Q
Topics: homemade, stl, 3D Printing, vise, vice, vise_jaws, bench_vise, 3d printed, bench vice, diy,...
6
6.0
Apr 19, 2021
04/21
by
prashant kumar (3diest)
data
eye 6
favorite 0
comment 0
3D printed Aluminium extrusion profile for Prusa I3 Mk3 3D printer. Two sizes : 1) 120 mm 2) 205 mm Tolerance : +- 0.15mm in length Material used : ABS plastic
Topics: thingiverse, 3d_printer, 3D_printing, stl, prusa, tevo_3d_printer, tevo_tarantula, diy, 3D PRINTED...
3
3.0
Mar 18, 2021
03/21
by
Sofus Arevad (__E36__)
data
eye 3
favorite 0
comment 0
This is a work in progress. Instructables and parts list will be added later on.
Topics: DIY, Ebike, Vesc, thingiverse, 3d printed ebike, Electric bike, stl
I 3D print a new enclosure for my Creality CR-100, on my Creality CR-10S Pro! Buy the Creality CR-100 3D Printer: http://bit.ly/2TgK28q Buy the Creality CR-10S Pro: http://bit.ly/2VtnT4V Hire Serhii, the Ukrainian CAD guy: http://bit.ly/2U8pfEy PolyMaker PolyMax PLA: http://bit.ly/2uqS4NZ Download the STLs: http://bit.ly/2VjvWRz Sponsor me, get early access and support my work (but only if you can without hardship)😘: ►SubscribeStar: https://www.subscribestar.com/naomi-wu (working again!)...
Topics: Youtube, video, Science & Technology, sexycyborg, shenzhen, China, Maker, Naomi Wu, Hardware,...
2
2.0
Mar 13, 2021
03/21
by
Drew Brew (drewbrewchan)
data
eye 2
favorite 0
comment 0
Remix of my 608 Bearing design with no logo. Printer must be dialed in, separates by only 0.2mm so it will be tight. https://youtu.be/iNzo9rq7fnw https://youtu.be/DqDdznp2iDY https://youtu.be/wwlw3RK31zY
Topics: thingiverse, 3d printed bearing, Engineering, print in place, 608 bearing, stl, skate bearing, 608
7
7.0
Apr 17, 2021
04/21
by
Alexander Korolov (fastfox)
data
eye 7
favorite 0
comment 0
Perfectly printable from ABS, small footprint parts minimum support. Use mini-BGC controller to drive the gimbal and finger LiFe batteries (3) or LiPo (2) to power the unit. Watch this video for more info: https://youtu.be/76f3wvhL92g
Topics: Customisation, action, modification, thingiverse, ABS, camera, aluminum, Brushless_Gimbal, adaptor,...
7
7.0
Mar 19, 2021
03/21
by
(ethanhayon)
data
eye 7
favorite 0
comment 0
##3D Printable Hexacopter This is a fully 3D printable hexacopter! All parts were printed on a Makerbot Replicator 2. Many of the parts max out the build volume of the rep2. More details will be posted soon, specifically parts lists and assembly instructions. UPDATE: Do not use the feet currently uploaded; they will break off on even a smooth landing. New feet are currently being designed and will be uploaded after testing.
Topics: 3dprinter, multicopter, Robotics, stl, makerbot, quadcopter, thingiverse, replicator2, 3d-printed,...
3
3.0
Mar 2, 2021
03/21
by
Jefferson Sanchez (mrjefferson105)
data
eye 3
favorite 0
comment 0
I love to keep sharing my projects with all of you. If you enjoy my designs, I invite you to subscribe to my Youtube Channel for more 3d printing content. The chain was made using my favorite shape the hexagon. Soon I will add more designs ***** I hope you find them useful. Any recommendations or feedback would be appreciated. If you want to invite me for a cup of coffee: yoyo12345@live.co.uk - Paypal Other than that enjoy MrJefferson105 - Youtube
Topics: tela 3d, tela espacial, Costume, chain mail, thingiverse, stl, 3d textile, keychain, tela 3d...
2
2.0
Jun 20, 2021
06/21
by
ok MOK (okMOK)
data
eye 2
favorite 0
comment 0
Shell ejection for bolt action mechanism. So I have finally decided to upload this design. It took a lot of work and filament to finally get to a point where I feel satisfied with the design and confident about uploading the finished model. I am still ironing out some minor issues with the model and have started a new print for an assembly guide for this model. Do subscribe to my channel for updates as to when this will release and also help support my work by becoming a patreon. Youtube link:...
Topics: PUBG, gun, thingiverse, awsome, ejecting, long, Ender_3, Props, CSGO, 3D_printed, bolt_action,...
