8
8.0
Apr 18, 2021
04/21
by
Matt Rosenthal (Rosynthal)
data
eye 8
favorite 0
comment 0
This is the Mechanical Shears model from 507 Mechanical Movements: http://507movements.com/mm_130.html You will need a 5/16" dowel, 4x 5/8" #6 screws, 2x 1/4" #6 screws, and a rubber band. The crank, nut, and cams all have a flat on one side so shave or sand off a bit of that dowel. Try to make it fit as snug as possible. It is best to assemble everything on the dowel, pilot drill through handle, nut, and base, screw screws in, and cut the dowel ends flush. See my blog post about...
Topics: Mechanical Toys, shears, mechanism, thingiverse, stl, 507_movements
24
24
Jan 19, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 24
favorite 0
comment 0
This is the ratchet model from 507 Mechanical Movements: http://507movements.com/mm_075.html You will need a 3/8" dowel and 2x 1" #6 sheet metal screws. It is best to assemble everything on the dowel, pilot drill through handle and moving pawls hole, screw screws in, and cut the dowel ends flush. Some filing will be necessary to get the stop pawl to fit. See my blog post about this here: http://artofrandomness.net/blogs/matts-blog/ratchet-model-maychanisms-1/...
Topics: Mechanical Toys, Mechansim, thingiverse, ratchet, stl, 507_movements
10
10.0
Jan 19, 2021
01/21
by
Matt Rosenthal (Rosynthal)
data
eye 10
favorite 0
comment 0
This is the level winding mechanism model from 507 Mechanical Movements: http://507movements.com/mm_108.html You will need a 5/16" dowel, a 3/8" dowel, and 6x short #8 machine screws. It is best to assemble everything on the dowel, pilot drill through handle and base, screw screws in, and cut the dowel ends flush. See my blog post about this here: http://artofrandomness.net/blogs/matts-blog/level-winding-mechanism-maychanisms-2/ https://youtu.be/ZjTXvZKW1RA
Topics: Level_Winding, Mechanical Toys, mechanism, thingiverse, stl, 507_movements
8
8.0
Apr 18, 2021
04/21
by
Matt Rosenthal (Rosynthal)
data
eye 8
favorite 0
comment 0
This is the Chinese Windlass model from 507 Mechanical Movements: http://507movements.com/mm_129.html and http://507movements.com/mm_352.html You will need a 3/8" dowel, 2x 1/2" #6 sheet metal screws and 1 3/4" #8 machine screw and nut. It is best to assemble everything on the dowel, pilot drill through handle and spool, screw screws in, and cut the dowel ends flush. See my blog post about this here: http://artofrandomness.net/blogs/matts-blog/chinese-windlass-maychanisms-3/ ...
Topics: Mechanical Toys, mechanism, thingiverse, Chinese_Windlass, stl, 507_movements
3
3.0
Mar 22, 2021
03/21
by
Matthew Di Giovanni (mdigiscout)
data
eye 3
favorite 0
comment 0
This is mechanism 276 from the book "507 Mechanical Movements". It is simple and satisfying to play with.
Topics: Mechanical Toys, stl, movement, 276, toy, mechanism, thingiverse, mechanical, 507_movements
3
3.0
Mar 10, 2021
03/21
by
Scorch (scorch)
data
eye 3
favorite 0
comment 0
This is a model of a mechanism I have seen a couple of times. The mechanism also appears in the book "Five Hundred and Seven Mechanical Movements". In the book it is listed as #027 and called "Multiple Gearing". The design was created in OpenSCAD. The OpenSCAD model is parameterized so that the number of arms on the small wheel can be changed easily. I have included SVG files for laser cutting models with 2,3,4,5 and 6 arms. the other parts are common between the designs....
Topics: desk_toy, lasercut, stl, thingiverse, 507_movements, mechanism, Mechanical Toys, Gear
5
5.0
Apr 13, 2021
04/21
by
(cn145912)
data
eye 5
favorite 0
comment 0
I made a 3D model of mechanical movement #505 from the site and book http://507movements.com/mm_505.html .
Topics: thingiverse, gear, 505, crank, stl, gears, Parts, Crank_shaft, 507_movements
8
8.0
Mar 9, 2021
03/21
by
Matthew Di Giovanni (mdigiscout)
data
eye 8
favorite 0
comment 0
This is mechanism 276 from the book 507 Mechanical Movements. It is fully 3D printed and is pretty satisfying to use.
Topics: 2way, 3dprint, 3dprinter, stl, thingiverse, 507_movements, mechanism, 507, Mechanical Toys,...
10
10.0
Apr 21, 2021
04/21
by
(mgg942)
data
eye 10
favorite 0
comment 0
This is a reworked update of Things 614962 and 652717. The geometry has been corrected to give a more truly linear output, and some fixing points have been enlarged for greater robustness. A complete set of stl file have been uploaded here. The model is based on mechanism 329 from 507movements.com. Designed in Moi and made in PLA on an Ultimaker 1. An animation created in Blender is available here: https://youtu.be/T4Nh_J__8oU A video of the printed model is available here:...
Topics: STEAM, thingiverse, stl, Technology, MOI, High_School, Engineering, STEM, Rotary piston drive, TVY,...
5
5.0
Jun 11, 2021
06/21
by
J M (Whale50)
data
eye 5
favorite 0
comment 0
#Mechanical Movement 123 ###What is it? -This is a device that is designed to turn rotary motion into linear motion. It does this by having to drive gears engage with the rack at opposite times, in turn pulling the rack back and forth. The Description from the book 507 Mechanical Movements "Intended as a substitute for the crank. Reciprocating rectilinear motion of the double rack gives a continuous rotary motion to the center gear. The teeth on the rack act upon those of the two...
Topics: mechanical, Rotary_to_linear, 507_movements, mechanism, thingiverse, 3D Printing, trinket, Gear,...
