4
4.0
Jun 6, 2021
06/21
by
Alan Alencar da Silva (benparvar)
data
eye 4
favorite 0
comment 0
9mm Bullet
Topics: Other, bullet, thingiverse, 9x19mm_bullet, stl
7
7.0
Mar 5, 2021
03/21
by
Dan Laffas (OzShooter)
data
eye 7
favorite 0
comment 0
Just a quick design of the 9mm hollowpoint
Topics: stl, Sport & Outdoors, 9x19mm_bullet, bullet, thingiverse
9
9.0
Apr 28, 2021
04/21
by
Andy Snider (Snidera)
data
eye 9
favorite 0
comment 0
Spacer for the UpLULA to keep 9mm single-stack mags from wobbling & annoying the hell out of you. Works with Sig P938 (7rnd) and Kahr K9(7 & 8rnd) most likely others. The .stl is 55mm tall. Might be too tall for 6rnd mags, but haven't tried it yet. You can z-scale it. PETG is a slip fit, the ABS I printed 5mm off was a little bit tight but worked fine. It could be shorter, it could have holes to make it lighter & use less plastic. I don't think it could be simpler to work up in CAD...
Topics: thingiverse, magazine, 9x19mm_bullet, stl, Sport & Outdoors
5
5.0
Jun 21, 2021
06/21
by
Rene J. (bednoob)
data
eye 5
favorite 0
comment 0
Ammo Box for 9mm about 20 rounds.
Topics: Tools, thingiverse, 9x19mm_bullet, stl, ammo_box
3
3.0
Jun 22, 2021
06/21
by
Sherman Karcher (skarcher85)
data
eye 3
favorite 0
comment 0
WORK IN PROGRESS. JUST MOCKED THIS UP & HAVE NOT HAD A CHANCE TO PRINT YET. HOLDS 50 RDS OF 9MM WITH A SLIDE LID. Printing: 2X2X2 (WALLS/TOP/BOTTOM) 15% INFIL 230 HOTEND / 60 BED
Topics: stl, thingiverse, 9x19mm_bullet, Sport & Outdoors, 9mm
4
4.0
Jun 11, 2021
06/21
by
(Luc064)
data
eye 4
favorite 0
comment 0
Summary Support balle 9mm neutralisée pour bracelet paracorde. Print Settings Printer Brand: Creality Printer: CR-10S Supports: Yes Filament: 1.75 PolyMax PLA Noir Noir
Topics: bracelet, thingiverse, bijoux, 9x19mm_bullet, balle, stl
7
7.0
Apr 18, 2021
04/21
by
Marlon Mendoza (mmendoza21)
data
eye 7
favorite 0
comment 0
I used Creality CR-8, the vignette is quite easy to print. I will upload the tip soon, I made a mistake in the measurements.
Topics: bullet, 3D Printing, thingiverse, bullets, stl, 9x19mm_bullet
4
4.0
Jan 4, 2021
01/21
by
joe wells (joe_wells)
data
eye 4
favorite 0
comment 0
my first project with using tinkercad to design my own model. it holds 100 rounds of 9mm and is modular and stackable
Topics: stl, 9x19mm_bullet, organizer, Sport & Outdoors, thingiverse, ammo, 9mm
17
17
Jan 10, 2021
01/21
by
things maker (evilthingsmaker)
data
eye 17
favorite 0
comment 0
- Bullet for .38/.357 or 9mm - actual caliber is 8.8mm, because hot PLA adds small amount, just print on your printer and push through barrel with wooden stick to test. If be too easy, just resize the base cylinder in FreeCAD. - rifling engages - used 1.5gn N310 on deep seated (35mm OAL) .357 case, maybe needs some cotton to keep powder at rear of case (tested 6" barrel seems 2 work) I'm not responsible for reloading, make your own calculations. Yes, I know this is extremely easy to draw,...
Topics: thingiverse, Sport & Outdoors, bullet, stl, 9mm, 9x19mm_bullet
3
3.0
Jan 6, 2021
01/21
by
Morton Upshot (mupshot)
data
eye 3
favorite 0
comment 0
9mm bullet box multiple versions. small. - primary large - can be used as a hand reload tray when stacked on their rim
Topics: stl, bullet box, 9x19mm_bullet, 9mm, Sport & Outdoors, thingiverse
2
2.0
Jan 18, 2022
01/22
by
Muhamed Mujicic (bouwser74)
data
eye 2
favorite 0
comment 0
simple 9mm bullet
Topics: 9x19mm_bullet, 9mm_Parabellum, thingiverse, 9mm, 3D Printing, stl
2
2.0
Apr 20, 2022
04/22
by
Erik Haugland (Waffelz25)
data
eye 2
favorite 0
comment 0
this is a batch of assorted ammunition i made for myself and freinds to use as snapcaps or to have on display. all are printed whitout support and whitout a raft. i printed it on my ender 3 v2, whit standard prusa QUALITY settings.
Topics: thingiverse, ammo, snapcap, bullet, 45ACP, Props, stl, 9x19mm_bullet
4
4.0
Mar 31, 2021
03/21
by
Ragnar Ulvestad (ragulves)
data
eye 4
favorite 0
comment 0
Bullet tray for Lee Pro 1000 reloading press. Made for 9mm setup but will also work for other calibers. Fits 30 9mm bullets.
Topics: 9mm_Parabellum, 9x19mm_bullet, reloading_press, thingiverse, Lee, Parts, reloading, stl
11
11
Apr 5, 2021
04/21
by
Dominik (clydefrog)
data
eye 11
favorite 0
comment 0
A simple Dummy, created by the dimensions found on wikipedia
Topics: thingiverse, nato, 9x19_bullet, 9x19mm_bullet, bullet, dummy, stl, Other
3
3.0
Aug 22, 2021
08/21
by
Mike Tong (BigMrTong)
data
eye 3
favorite 0
comment 0
Scan of a 9mm Brass case with a sculpted skull. No real purpose, just created for fun . .enjoy ! ------------------------------------------------- If you want to say thanks, check out my patreon Below .... Support Patreon : https://www.patreon.com/bigmrtong Patreon Preview : https://tinyurl.com/bigmrtong Everything included to everyone no monthly packs Thingiverse "Things" : https://www.thingiverse.com/bigmrtong/designs Some of my models sets are available via CGI Trader :...
Topics: 9mm, scan, 9x19mm_bullet, brass, skull, Sculptures, bullet, shell, stl, thingiverse
6
6.0
Apr 18, 2021
04/21
by
Nicolas CAQUERET (xcrabe)
data
eye 6
favorite 0
comment 0
A gun safety marker for 9x19 hangun. the hole is for any attachement you want like "remove before flight" flame or paracord
Topics: gun_safety, thingiverse, stl, 9mm_para, 9x19mm_bullet, 9mm_Parabellum, Other
5
5.0
Apr 1, 2021
04/21
by
Maciej Szulc (maciejs20)
data
eye 5
favorite 0
comment 0
No supports required, designed for 0.2mm layer width with 10-15% infill. It's made to accommodate the plastic tray that can be found in 9x19mm S&B ammo. This tray is not a part of this project, You need to get it from the stock ammo box! Just get the plastic out of the S&B paper ammo box, put inside the lower printout and enjoy. The latch that holds two halves closed is a tight fit - just lubricate it lightly before use.
Topics: 9x19mm_bullet, ammo_box, thingiverse, box, 9mm, Other, ammo, stl, S&B
6
6.0
Aug 9, 2021
08/21
by
Danny Hoogesteger (Untangle)
data
eye 6
favorite 0
comment 0
I used ESUN PLA PLUS for this model and it gives enough flex to the detents this way. but other materials might work fine as well.
Topics: 9x19mm_bullet, stripper_clip, thingiverse, 9mm, 9mm_Parabellum, Sport & Outdoors, stl
9
9.0
Apr 24, 2021
04/21
by
Duang Chan (eraviaam)
data
eye 9
favorite 0
comment 0
Just for Fun! :D
Topics: 3D Printing, nato, firearms, stl, thingiverse, bullet, 9mm, luger, 9x19mm_bullet
3
3.0
Jan 11, 2021
01/21
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
there are 3 sizes one 27mm, 27.50mm and 28mm in length. I kept away form the 26mm and 29mm size those where on the outer spectrum from the tolerances. but the idea is that this part is printed completely solid and is used wile pressing in the bullet in the casing in one of this 3 molds so they are all consistent and speed up the progress they have not been tested so make sure to do some quality control on the tool and what you make is correct in size.
Topics: thingiverse, Sport & Outdoors, stl, 9mm, 9mm_Parabellum, BWA, ammo, 9x19mm_bullet, tool
8
8.0
Mar 2, 2021
03/21
by
Theo Proulx (gaming_geko)
data
eye 8
favorite 0
comment 0
Holds 25 rounds of 9mm Parabellum ammo. Minimum layer height: ~3mm
Topics: 9mm_Parabellum, holder, 9mm, gun, bullet, 9x19mm_bullet, Organization, thingiverse, stl
6
6.0
Mar 25, 2021
03/21
by
Vil Coyote (Vilcoyote77)
data
eye 6
favorite 0
comment 0
9mm version of my thing https://www.thingiverse.com/thing:3875973 Slightly modified vs the "work in progress" to add stability to the rounds while carrying the box. 45ACP and 10mm will follow soon.
Topics: stl, ammo_box, thingiverse, 9x19mm_bullet, Sport & Outdoors, 9mm, 9x19, 9mm_Parabellum
5
5.0
Mar 15, 2021
03/21
by
Douglas Kautzman (kautzmad)
data
eye 5
favorite 0
comment 0
this is a Skull Chamber Flag for 9mm pistol
Topics: Barrel_Flag, thingiverse, 9mm_Parabellum, chamber_flag, 9x19mm_bullet, 9mm, skull, stl, Tools
10
10.0
Jan 14, 2021
01/21
by
Juan Maverick (jpmaverick)
data
eye 10
favorite 0
comment 0
This is a 9mm x100 ammo box, with the Molon Labe logo and text in greek on top. It´s also stacking capable using 8 pieces of... "things...." (I don´t know how to call them), that you need to glue to the bottom part (as shown on the last pic). Hope you find it usefull
Topics: shooting, thingiverse, Sport & Outdoors, ammo_box, stl, target_shooting, shooting_sports, ammo,...
4
4.0
Mar 10, 2021
03/21
by
Kai Dannath (soeselheinin)
data
eye 4
favorite 0
comment 0
Dimensional accurate 9mm round as per SAAMI
Topics: 9mm_Luger, 9mm, stl, thingiverse, Dummy_round, snapcap, 9mm_Parabellum, 9x19mm_bullet, Hobby
1
1.0
Apr 20, 2022
04/22
by
helen splitt (Helen_Splitt)
data
eye 1
favorite 0
comment 0
Bullet Shell stand for 25mm tanks.
Topics: vape, shell, thingiverse, stand, vape_stand, bullet, tank, Organization, stl, collection,...
2
2.0
Jan 18, 2022
01/22
by
Duvan Bence (Dmed911)
data
eye 2
favorite 0
comment 0
A 100 hole reloading tray designed to hold 9mm brass during reloading Hole sizes based on the No: 3 Frankfort Arsenal Perfect Fit Reloading Trays: Hole Diameter: 0.401" / 10.2 mm Hole Depth: 0.400" / 10.15 mm
Topics: 9x19mm_bullet, 9mm_Parabellum, reloading, thingiverse, 9mm, stl, Reloading_Tray, Sport &...
12
12
Jan 11, 2021
01/21
by
J. L. (skyddancer)
data
eye 12
favorite 0
comment 0
Hereby you can take the ammunition better from the Tray. Hiermit könnt ihr die Munition besser aus dem Original halter entnehmen
Topics: gun, thingiverse, Hobby, stl, tray, pistol, weapon, guns, ammunition, 9x19mm_bullet, luger,...
8
8.0
Mar 3, 2021
03/21
by
Alex Schwarz (TASPP)
data
eye 8
favorite 0
comment 0
In addition to my makes I created the next caliber for pistols. Feel free to edit and share!
Topics: gun, props, bullet, 9x19mm_bullet, pistol, thingiverse, stl, 9x19mm, prop, cosplay_prop, Video Games
6
6.0
Jun 20, 2021
06/21
by
FFFTechnology (FFFTechnology)
data
eye 6
favorite 0
comment 0
Some 3D printed 9mm snap caps for dry fire training, safety, anything really... Tested in my 9mm subcompact pistol. Depending on the machine's printing capabilities, it's highly recommended you lightly sand each snap cap round semi smooth before function testing. After the sanding process, my pistol was able to strip each round from it's mag, chamber, and extract each round just as if it were a live, unfired round. The firing pin makes solid contact with the plastic round when the trigger is...
Topics: 9mm, 9mm Pistol, ammo, thingiverse, 9x19mm_bullet, Other, stl, 9x19, Snap Caps, training
2
2.0
Dec 14, 2021
12/21
by
Clif Prager (cprager51)
data
eye 2
favorite 0
comment 0
I really liked the magazine that myshadeofgray created, but felt that it was missing the retention plate that prevents the base plate from sliding off without first depressing the button. The only one that I could find was in the Glock 26 Mag Package by NCSquirll99Maker but it was slightly too wide to fit into the G17 mag created by myshadeofgray. Further, it didn't actually secure under the force of the spring since the backside was flat. Because of these factors, I took the G26 Mag retention...
Topics: 9mm, Glock_17, DIY, stl, thingiverse, 9mm_Parabellum, glock_magazine, glock, 9x19mm_bullet
11
11
Apr 17, 2021
04/21
by
Jody Stout (Stoutone)
data
eye 11
favorite 0
comment 0
For use on the Hornady Bullet feed dies. I ordered RCBS clear tubes. They fit down in the 45 acp feed die wouldn't fit in the 9mm die. Until now ;) Fill your die up with bullets, so you know where to drill the hole for the clip. (See the 40cal Version) I'm out of 9mm lead. Sorry.
Topics: hornady_LNL, 9mm, thingiverse, stl, Sport & Outdoors, 9x19mm_bullet, Reloading, hornady,...
5
5.0
Mar 26, 2021
03/21
by
Christian Steinbach (steini2k)
data
eye 5
favorite 0
comment 0
9x19mm Dummy zum Waffentraining
Topics: stl, thingiverse, Sport & Outdoors, 9mm, Polizei, police, bullet, training, dummy_model, dummy,...
4
4.0
Apr 5, 2021
04/21
by
Ice Bison (IceBison)
data
eye 4
favorite 0
comment 0
Thank you to u04601 for designing this 9mm snap cap insert. I have simply arranged these in 10, 20, 30, 40, and 50 unit count iterations for ease of of use.
Topics: thingiverse, snap_cap, 9mm, 9x19mm_bullet, bullet, Sport & Outdoors, cartridge, stl,...
4
4.0
Jun 6, 2021
06/21
by
jc jc (jeanou)
data
eye 4
favorite 0
comment 0
I needed a small ammo box, for 15 rounds of 9mm. It's pretty tight, so you may need to print it at 101%. Design inspired of https://www.thingiverse.com/thing:1499579 2021-02-19 : box for 38 special / 357 magnum added. -- Boites pour 15 balles de 9mm, 38 spécial, 357 magnum... Ajustement assez serré, peut être à imprimer à 101%.
Topics: thingiverse, Sport & Outdoors, 357_magnum, 9x19mm_bullet, ammo, ammo_box, 9mm, 38_special, stl
4
4.0
Mar 13, 2021
03/21
by
Ruben Frantzen (Rompeltutt)
data
eye 4
favorite 0
comment 0
This is a Ammo box for 9mm that dispences 6 rounds at the time. I find this usefull in competitions requiering 6 rounds per time. Realy annoying to pull out 6 rounds of a box with 5 in a row from the factory :) and the rounds are pre counted so you dont need to do that beore start. Nozzle: 205 Bed: 50 Fillment: PLA Printer: Creality CR10s Feel free to comment if you have any questions or ideas for inprovment :) Enjoy! :D
Topics: thingiverse, felt, Sport & Outdoors, Tanfoglio, ammo_box, 6rnd ammo box, CZ75, stl,...
3
3.0
Jan 19, 2022
01/22
by
Duvan Bence (Dmed911)
data
eye 3
favorite 0
comment 0
Another attempt at a 9mm ammo box to hold 50 rounds. I have not printed it yet and therefor not quite sure of all the tolerances and how well it will fit together.. Once I get back home, I will print, test and make the necessary adjustments as needed, but in theory everything should be ok. For the hinge, I plan on using a piece of 1.75mm pla filament as a hinge pin and heating the ends to secure in place, as I have seen done on other similar box designs.
Topics: 9x19mm_bullet, ammo_box, thingiverse, pistol, Storage_Box, 9mm, bullet, stl, Sport & Outdoors,...
7
7.0
Jan 20, 2021
01/21
by
Norberto Torres (Ntorresreyes94)
data
eye 7
favorite 0
comment 0
Various bullet props. Bullets are made to exact specification for that given bullet. More to be added later, but I have included 3 very common bullets to begin with.
Topics: 45ACP, bullet, 40_SW, prop_bullets, bullets, thingiverse, magazine, 9x19mm_bullet, Props, stl,...
3
3.0
Jan 18, 2022
01/22
by
Duvan Bence (Dmed911)
data
eye 3
favorite 0
comment 0
A 50 round ammo box designed to hold 50 x 9mm bullets. I have not printed it yet, but should print relatively easy without supports and no assembly required.
Topics: 9x19mm_bullet, cartridge_reloading, 9mm_Parabellum, reloading, ammo_box, thingiverse, 9mm, bullet,...
4
4.0
Jun 7, 2021
06/21
by
Torsten Schuhböck (optibit)
data
eye 4
favorite 0
comment 0
This is a ammo-box designed to carry the original GECO cartridge holder. I use it as a replacement for bulk packs
Topics: Sport & Outdoors, 9mm, munition, ammo, ammo box, thingiverse, 9mm box, patronen, 9 mm, stl,...
5
5.0
Mar 26, 2021
03/21
by
Martin Garcia (marospe77)
data
eye 5
favorite 0
comment 0
Caja porta municion 9 mm, con separadores internos y tapa corrediza superior
Topics: stl, 19x19mm, ammo, ammo_box, bullet box, thingiverse, Sport & Outdoors, ammo_holder, 9x19,...
15
15
Jan 18, 2021
01/21
by
Joonas Lehti (AvaruusTurri)
data
eye 15
favorite 0
comment 0
As a person living in a country with strict gun laws i wanted to print some ammo in real scale just to get a better idea how big bullets and different type of ammo really is. I made few of the more commonly known bullet types using as close as possible measures to the real world counterparts to make these as accurate as possible. Includes: 5.56x45 NATO 7.62x39 7.92x57 Mauser 7.65×21 Parabellum 9x19 Parabellum 10mm AUTO 30-06 Springfield 40 S&W 45 ACP 308 Winchester 338 Lapua Magnum 500...
Topics: 30-06, bullet, mauser, 7.62, thingiverse, 338_lapua, 5.56, 9x19mm_bullet, 50_bmg, ammo, Other, stl,...
3
3.0
Jan 19, 2022
01/22
by
Duvan Bence (Dmed911)
data
eye 3
favorite 0
comment 0
Another attempt at a 50 hole reloading tray for 9mm bullets, playing around with a bit of a non standard / low poly design. Hole sizes is standard 10.4mm (0.41") diameter with a depth of 10mm (0.4") No supports needed
Topics: 9x19mm_bullet, cartridge_reloading, 9mm_Parabellum, reloading, thingiverse, pistol, 9mm, stl,...
3
3.0
Jan 19, 2022
01/22
by
Duvan Bence (Dmed911)
data
eye 3
favorite 0
comment 0
A small, compact 50 hole reloading tray in caliber specific sizes. I have a very small space in which I do reloading and I therefor designed the reloading trays to take up minimal desk space and to be stackable when not in use. The spacing between rounds might be a bit tight for some folks... Tray length and width: 120mm x 120mm, Height: 13mm, Hole depth: 11.5mm Designs included for calibers that I reload, but if there is requests then I can customize and upload for most other pistol and rifle...
Topics: 9x19mm_bullet, cartridge_reloading, reloading, thingiverse, 308_win, Reloading_Tray, 9mm, 7x57,...
4
4.0
Apr 23, 2021
04/21
by
Jacob Weigand (abnoba12)
data
eye 4
favorite 0
comment 0
These are great for testing the function of a firearm. You can work your firearm by loading, cycling, and dry firing it. These caps fit very tight into spent casings and will not fall out. No glue is necessary.
Topics: firearm, training, snap-cap, Sport & Outdoors, cap, dummy, gun, test, casing, stl, thingiverse,...
5
5.0
Mar 19, 2021
03/21
by
Martin Heim (Ghost-AR15)
data
eye 5
favorite 0
comment 0
Hallo, habe diese Box unter folgenden Gesichtspunkten erstellt: - Robust ohne "Sollbruchstellen" - Einfache Handhabung - Ausdruck ohne Verlust durch Stützstrukturen - Geringer Materialaufwand und zügiger Druck (72 Gramm) bei 0,3 mm Druckzeit 8 Stunden Ihr nutzt einfach die Originalen Trays die bei der Fabrikmunition dabei sind (ich nutze die von Fiocchi) Besonders cool sieht es aus, wenn ihr die Box noch mit eurem Namen oder "Logos" verziert ;-)
Topics: ammo, 9mm, 9x19mm_bullet, reloading_tools, ammunition_box, Sport & Outdoors, reloading,...
17
17
Jan 13, 2021
01/21
by
Martin Doubek (ArnieX)
data
eye 17
favorite 0
comment 0
Hi, just very simple 9mm luger dry fire round. Happy printing!
Topics: gun, thingiverse, dry fire, stl, 9mm_Parabellum, weapon, Gadgets, firearm, ammo, guns, ammunition,...
4
4.0
May 1, 2021
05/21
by
David Gerhard (Jogurtek)
data
eye 4
favorite 0
comment 0
9mm Bullet feeder 7/8 Die. Integrated with droptube and mount for Tom_Pens lightsensor for Ammo_Mikes Bullet Collator. (Both unfornutaly unavailable here on thingiverse) Slightly modified version of (https://www.thingiverse.com/thing:4599062) to be able to use two 13/64 x 13/16 extension springs as well as rubberbands. Inner part of feeder die is integrated into one piece with the droptube, which makes it much stronger. Droptube have quick-detach adapter modified for 14mm outer diameter...
Topics: stl, Dillon, openBulletFeeder, 9mm_Luger, 9mm, 9x19mm_bullet, reloading_dies, Sport & Outdoors,...
10
10.0
Jun 10, 2021
06/21
by
DWAIN COUFAL (dacinator)
data
eye 10
favorite 0
comment 0
This is a spacer/adapter for the UpLULA when using it to load the S&W M&P Shield 9mm and .40cal magazines. Without this spacer/adapter, the Shield's single-stack magazine shifts/wobbles while loading - making it annoying and cumbersome compared to loading the Shield magazines with the spacer/adapter in place. The spacer/adapter was created in Fusion360 and supports the full length of the magazine inside the UpLULA. It has a nice friction fit that stays in place while loading, yet it's...
Topics: maglula, 9x19, m&p, s&w, uplula, adapter, speedloader, Sport & Outdoors, 40_cal,...
10
10.0
Jan 14, 2021
01/21
by
Steve Ouklama (stonecoldfx)
data
eye 10
favorite 0
comment 0
This is my first Design here on Thingiverse! It spins with the right bearings (using 608 Hybrid Ceramic Bearings) like 3:30 min just by using your hands no air pressure!! Here's a Video on Youtube: https://youtu.be/myZWS3RKuaU I hope you enjoy it!! >##### _UPDATE1 / 15.3.18 :_ Added a Support Free Redesigned Model and new Bearing Caps ("BulletSpinnerNoSupport_V2.stl", "SpinnerCap2_V2.stl", "SpinnerCap1_V2.stl")
Topics: 608 bearing, thingiverse, spinner, stl, Toys & Games, 9mm, bullet_spinner, gadget, toy,...
