8
8.0
Mar 22, 2021
03/21
by
Johnny Härtell (jhartell)
data
eye 8
favorite 0
comment 0
Anycubic Kossel Trigorilla mount inspired by https://www.thingiverse.com/thing:2747843 This allows mounting the Trigorilla board lower inside the frame of the Anycubic Kossel, which creates a bit more clearance when installing stepper drivers that require active fan cooling (TMC2208 in my case). It also makes cable management a bit easier. The support pieces mount to the opposite sides of the frame, and make the assembly more solid. Since the USB cable is difficult to plug into the board with...
Topics: Anycubic_Delta, stl, Anycubic, 3D Printer Accessories, Anycubic_Kossel_Plus, thingiverse,...
4
4.0
Mar 22, 2021
03/21
by
Hampus Olsson (hampisch)
data
eye 4
favorite 0
comment 0
Google Nest Hub Wall Mount Prototype 3 is out, and working. Prototype 5 is out, and modded. Prototype 6 is out, and modded. Prototype 7.1 is out, and modded.
Topics: google, hub, stl, anycubic, wall hub, google home, nest, wall mount, DIY, google hub, diy,...
8
8.0
Mar 22, 2021
03/21
by
F. Behrens (layershifter)
data
eye 8
favorite 0
comment 0
Since 2017, hundreds of i3 Mega owners downloaded and used my [cable guide version 1](https://www.thingiverse.com/thing:2634402) which worked well and looked good - but came with one flaw: The maximum build height was reduced to about 198mm. Now, finally, I redesigned the guide, trying to keep all the goodness it stands for but eliminating the flaws. The result is **smoother, slicker and fits even better** than its predecessor. Also, the holding force for the cable has been optimized, allowing...
Topics: stl, Anycubic, cable_holder, improved, 3D Printer Parts, cable_guide, thingiverse, Anycubic_I3_Mega
4
4.0
Mar 22, 2021
03/21
by
Maker Matrix (MakerMatrix)
data
eye 4
favorite 0
comment 0
Some LCD-based resin printers have uneven light distribution across the screen, due to the way the LED light source is placed underneath, manufacturer's design of the LED array, etc. Some firmwares for these printers have a function that allows you to define a mask that slightly dims the brighter areas of the screen in order to give a more uniform illumination and hopefully enable more consistent dimensional accuracy across the build plate. This thing consists of a grid that installs in place...
Topics: stl, resin_printer, anycubic_photon, Elegoo_Mars, 3D Printing Tests, thingiverse, EPAX
8
8.0
Jun 6, 2021
06/21
by
Balthasar von Graffenried (Morpheus82)
data
eye 8
favorite 0
comment 0
!!!!!!!!!!!!!!!-!!!!!!!!!!!!!!!!!!!!!!!!!!! 07.07.2019 I have optimized the holder I have 2 wedges fitted these holding holders even better. Important is a high infill (I have chosen 75%) the holder B has to be printed twice With my settings, the pressure lasted a little 5 1/2 hours
Topics: Anycubic_I3_Mega, thingiverse, hotend, stl, 3D Printer Accessories, Nozzle, disassembly
4
4.0
Jun 6, 2021
06/21
by
Pavel (drbit)
data
eye 4
favorite 0
comment 0
Anycubic Predator 150 mm LED ring holder https://aliexpress.com/item/32898343325.html
Topics: 150 mm, thingiverse, Anycubic Predator, stl, 3D Printer Accessories, Predator, LED ring holder
8
8.0
Mar 12, 2021
03/21
by
Julia Mono (gibbon_)
data
eye 8
favorite 0
comment 0
Newer version available here: [thing:45402959](https://www.thingiverse.com/thing:45402959) I have my extruder motors control voltage set quite high to cope with skipping issues and I am already actively cooling my extruder motor using a 50mm fan attached to its housing. The extruder feed side however, especially the transport wheel and the lever with the press on wheel still get very warm. I want to use a printed extruder bowden attachment that is TPU capable and for that I need that side of...
Topics: 3D Printer Accessories, thingiverse, extruder, Fan holder, stl, Anycubic_I3_Mega
5
5.0
Mar 22, 2021
03/21
by
Michael Breit (exmen)
data
eye 5
favorite 0
comment 0
Anycubic Chiron Extruder Threading Aid (Spare) DE Anycubic Chiron Extruder Einfädelhilfe (Ersatzteil) Wer die Einfädelhilfe vom Anycubic Chiron Extruder verloren hat, kann sich hiermit ein Ersatzteil drucken. EN Anycubic Chiron Extruder Threading Aid (Spare) Anyone who has lost the threading aid of the Anycubic Chiron extruder can print a spare part here.
Topics: ersatzteil, chiron, stl, spare, anycubic, extruder, einfä, delhilfe, trichter, 3D Printer...
12
12
Mar 22, 2021
03/21
by
Jef Daems (daesm)
data
eye 12
favorite 0
comment 0
LED strip holder with optional bowden guide for the Anycubic i3 Mega. The design consists off 15 cm parts that can be press-fitted on the metal frame of the printer. There is an 8 mm slot to slide in LED strips. No tape or glue required, so they won't come loose in time. The slot will fit most 8mm LED strips without waterproofing coating. Search for "2835" LED strips for suitable types. There is a small cover at the front side to prevent being blinded while looking at your print. I...
Topics: LED, bowden_guide, stl, led_mount, 3D Printer Accessories, led_2835, thingiverse, Led_Holder,...
6
6.0
Mar 22, 2021
03/21
by
Ryan Mast (RyanTheMast)
data
eye 6
favorite 0
comment 0
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. Preferably completely assembled, with in-process photos and if you can please note any issues or alternative parts used to help others. Thank you This is a great way to cure prints without breaking the bank. In most cases I can fully cure items in about 3-10 minutes depending on size,...
Topics: resin, inkspire, elegoomars, thingiverse, Prusa_SL1, cureing, qudi, fep, prusa cw1, curing_station,...
3
3.0
Mar 22, 2021
03/21
by
T Ruck (Trucker2215)
data
eye 3
favorite 0
comment 0
This is a full size wash station and strainer I use for the Elegoo Mars to wash my parts but its large enough for the build platform and the vat or any that are similarly size. It uses cheap dollar tree 13.56 cup containers. The link is attached below for the container there is also a picture included above. it should be easy to find at any local dollar tree or online. Please print with supports I printed the stand at 17% infill with 3 shells and the strainer at 25% with 3 shells Container with...
Topics: stl, resin, anycubic_photon, 3D Printer Accessories, SLA, Elegoo_Mars, thingiverse
7
7.0
Jun 6, 2021
06/21
by
Caedo (Caedo)
data
eye 7
favorite 0
comment 0
The ultrabase is an awesome surface to print on, but its technology also causes some problems. It works by using a material with micropores that open up when the plate is heated, and which closes shut when the plate is cooled, detaching the print. Over time, micropores grab onto dust, and don't let go of it during normal plate cleaning. In fact, they tend to grab on to fibres from the cloth or paper towel used in the process. For casual personal-use prints, that isn't really a problem. For...
Topics: Anycubic_I3_Mega, thingiverse, Bed_cleaner, stl, 3D Printer Accessories, ultrabase
8
8.0
Mar 22, 2021
03/21
by
Oleg Petrov (Chepiga)
data
eye 8
favorite 0
comment 0
Я не несу никакой ответственности, если вам не подойдет такой дизайн. Это крышка блока питания для Anycubic i3 Mega, чтобы заменить стоковый кулер на вентилятор размером 100х15мм. I do not carry any responsibility if the thing doesn't work for you. This is a PSU cover for Anycubic i3 Mega to replace the default fan with a 100x15mm fan. It appeared to be a tight fit...
Topics: PSU_Cover, stl, power_supply_cover, 3D Printer Accessories, thingiverse, Anycubic_I3_Mega
8
8.0
Jun 7, 2021
06/21
by
cosimo marzolla (xsiriusx)
data
eye 8
favorite 0
comment 0
Dopo un anno di vari case stampati dai risultati che non mi soddisfavano e decine di ore di stampa buttate, ho deciso di disegnarmelo da solo un supporto comodo facile ed affidabile. Ho preso spunto dal progetto https://www.thingiverse.com/thing:922740/files. Si può montate su entrambi i lati se si vuole anche in testa. Basta inserire la staffa, prima il lato lungo e e poi premere sul corto per sentire il classico CLAP! dopo di che basta agganciare il case del raspberry nella direzione che si...
Topics: Anycubic_I3_Mega, raspberry_pi_case, Anycubic, thingiverse, stl, 3D Printer Accessories,...
8
8.0
Mar 19, 2021
03/21
by
Thomas Fürst (Act7)
data
eye 8
favorite 0
comment 0
2 teilige aufklippbare Halterung für einen digitalen Messschieber beim Anycubic i3 Mega
Topics: Messschieber, Anycubic_I3_Mega, Schiebelehre, thingiverse, caliper_holder, 3D Printer Accessories,...
3
3.0
Mar 31, 2021
03/21
by
Edwin Richter (Xardasteo)
data
eye 3
favorite 0
comment 0
Recently I printed a resin strainer holder for the well known metal strainer (Just look for metal strainer on Aliexpress). I found it here on Thingiverse but cannot seem to find it now... Still, the diameter of the strainer holder is the same as the bottle's.... quite pointless and unusable. So to not create waste, I designed an adapter for the brown and black bottle's necks. It fits on there real nice and snug! This adapter will work with all funnels / strainer holders, even the rubber ones...
Topics: thingiverse, strainer, Resin_Strainer, Elegoo_Mars, anycubic_photon, 3D Printer Accessories, resin,...
7
7.0
Mar 31, 2021
03/21
by
Mark Macherey (MMach)
data
eye 7
favorite 0
comment 0
anycubic I3 Mega Bed leveling wheel no supports needed print from any material print 4 wheels and place on thumb screws for easy adjustments of bed height also check out my other wheels https://www.thingiverse.com/thing:3791392 *********************************************************************************************** *** If you download any of my designs please consider clicking that "like" button. ***...
Topics: thingiverse, anycubic, Anycubic_I3_Mega, 3D Printer Accessories, stl, thumb wheel
7
7.0
Mar 21, 2021
03/21
by
Simon (OE_Maker)
data
eye 7
favorite 0
comment 0
### Idea After I've printed my first fan duct https://www.thingiverse.com/thing:4168105 I have noticed some problems, so I designed my own. (I measured it just to get the rough dimension and started from scratch.) ______________________________________________________________________ ### Problem 1: The first annoying thing was the assembly. (same problem with the most other fan ducts) The standard fan comes with two little tubes, acting as spacers, to assure there is a gap between the fan an...
Topics: mega, stl, Anycubic, fan, fan_duct, 3D_Printer_Accessory, Mega_s, 3D Printer Parts, 3d_printer,...
9
9.0
Mar 10, 2021
03/21
by
Anton Thambrin (astha2)
data
eye 9
favorite 0
comment 0
A simple installation clip for the heat/hot bed cable of Anycubic i3 Mega. 1. Print out the part. 2. Take off the rear right bed leveling knob. 3. Insert the bed leveling knob to the part. 4. Install the bed leveling knob back to the bed frame. 5. Clip the dangling cable to the part. Bob's your uncle!
Topics: simple, Anycubic, cable_management, stl, thingiverse, 3D Printer Accessories, cable_holder,...
1
1.0
Apr 20, 2022
04/22
by
Claus Terjung (CHTer)
data
eye 1
favorite 0
comment 0
Hier ein Halter für die beliebten Logitech Cams, Die Teile werden einfach zusammen gesteckt (oder zusammen geklebt) und neben den Schrittmotor für die Z-Achse eingeklemmt (oder angeschraubt bzw. geklebt). weitere Bilder folgen noch
Topics: thingiverse, anycubic_vyper, 3D Printer Accessories, Logitech_C270, stl
11
11
Mar 5, 2021
03/21
by
Bu We (Merikisseli)
data
eye 11
favorite 0
comment 0
For more Printspeed !!
Topics: filament spool holder, Anycubic, stl, spool holder, Endcap, spool_mount, upgrade, PETG, 3D Printer...
7
7.0
Jan 3, 2021
01/21
by
Paul S. (Paul_GD)
data
eye 7
favorite 0
comment 0
I took Kotze101's Cover and edited printaway's back cover to be slimmer and have holes so it kinda replicated the way the original power supply was mounted on the Kossel. Additionally, I made a 2020 mount inspired by jbanion's. Yea that's it basically.
Topics: stl, MeanWell_LRS_350-12, 3D Printer Parts, kossel, anycubic, thingiverse, MeanWell_LRS_350,...
11
11
Jan 4, 2021
01/21
by
Amy Gamble (AmyTheBun)
data
eye 11
favorite 0
comment 0
I made this to reduce the vibration transfer and rattle of my extruder to the base. it works okay. you slide it in and screw it back. I use the "dummy thicc" version and it needed longer screws. only a bit longer. so I made a thinner version as this one looked unnecessarily thick. hopefully the thinner one might make you be able to use the stock screws and therefore also a thin Allen. if you wanna use a thicc philips screw driver what you can do is to only slightly unscrew the...
Topics: Anycubic_I3_Mega, TPU, stl, Anycubic, extruder, thingiverse, vibration_dampener, 3D Printer...
8
8.0
Apr 21, 2021
04/21
by
Kot 0005 (Ryxxi)
data
eye 8
favorite 0
comment 0
New model Is V4.1 and V4.2 4.2 has mesh built into the scoop. Resin scouper. has a cutout to fix a nylon filter. https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313.TR11.TRC1.A0.H0.Xnylon+filter.TRS0&_nkw=nylon+filter&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=filter
Topics: thingiverse, 3D Printer Parts, stl, Anycubic, Resin_Vat, Phrozen, resin
8
8.0
Mar 31, 2021
03/21
by
Devin Fritz (StaticRed)
data
eye 8
favorite 0
comment 0
This is a short remix of the bmg durect drive by MT2. His design was really nice, but there was no bltouch mount. So designed one, the real offset would be y: +2 and x+40. But the i3 mega is not compatible with a 40mm bltouch offset, so you have to use 30mm for x. But it works really good in my case. Also the pcb-holder did not fit in my case, so i extended it and now it works fine. Also the part cooler was not working for me. So i made it a little bit bigger on the fan mount. For last i also...
Topics: BLTouch, thingiverse, Anycubic_I3_Mega, Anycubic, 3D Printer Extruders, E3D_v6, bondtech_bmg, stl,...
8
8.0
Apr 2, 2021
04/21
by
Peter Motzko (pmoscode)
data
eye 8
favorite 0
comment 0
I made this remix of prodals Raspi holder because the perspective of the pi cam was too steep from the side (for me). So I took the bed mount of nobikko and mounted the pi cam holder joint onto it. You need the pi cam holder from: https://www.thingiverse.com/thing:3950698
Topics: thingiverse, Anycubic_I3_Mega, Heated_Bed, raspberry_pi_camera, 3D Printer Accessories, stl,...
6
6.0
Apr 2, 2021
04/21
by
Rico Kirsten (Kallisto87)
data
eye 6
favorite 0
comment 0
Since I had the webcam lying around and it works great with the Raspberry Pi via Plug&Play (ideal for OctoPi), I was looking for a way to attach it to my I3 Mega S. The model S comes standard with a holder for the filament, which is perfect for it. This metal holder can also be easily retrofitted to the I3 Mega (I think you can get it on Amazon). I took the template from JoaquinDillen, adapted and improved the arm for the Anycubic. No other screws are needed. [Optional] Additionally I...
Topics: Octoprint, anycubic_i3_Mega_S, Octoprint_Camera, webcam, thingiverse, 3D Printer Parts,...
10
10.0
Mar 19, 2021
03/21
by
Pil June Pak (yulian99)
data
eye 10
favorite 0
comment 0
Source Code for Arduino - https://github.com/yulian/maker-projects/blob/master/sketch_gamepad/sketch_gamepad.ino Basic Info - Nozzle size : 0.4mm - Filament diameter : 1.75mm Detail Settings - Layer Height : 0.2mm - Wall Thickness : 1.2mm - Infill Density : 100% - Print Speed : 60mm/s - Build Plate Adhesion Type : Skirt - Printing Time for GamePad_Cover : 1h 58m - Printing Time for GamePad_Bottom : 2h 21m Other - Slicing Software : Cura4.2.1 - 3D Printer : Anycubic i3 Mega
Topics: fusion360, Anycubic_I3_Mega, controller, Gamepad, ToyMakers, Video Games, Autodesk_Fusion_360,...
7
7.0
Apr 3, 2021
04/21
by
Pil June Pak (yulian99)
data
eye 7
favorite 0
comment 0
Basic Info - Nozzle size : 0.4mm - Filament diameter : 1.75mm Detail Settings - Layer Height : 0.2mm - Wall Thickness : 1.2mm - Infill Density : 100% - Print Speed : 60mm/s - Build Plate Adhesion Type : Skirt - Printing Time : 37m Other - Slicing Software : Cura4.2.1 - 3D Printer : Anycubic i3 Mega
Topics: thingiverse, Anycubic_I3_Mega, dice_box, ToyMakers, stl, dice, TinkerCAD, Puzzles, numbers,...
7
7.0
Apr 3, 2021
04/21
by
Pil June Pak (yulian99)
data
eye 7
favorite 0
comment 0
asic Info - Nozzle size : 0.4mm - Filament diameter : 1.75mm Detail Settings - Layer Height : 0.2mm - Wall Thickness : 1.2mm - Infill Density : 50% - Print Speed : 60mm/s - Build Plate Adhesion Type : Skirt - Printing Time : 5h 26m Other - Slicing Software : Cura4.2.1 - 3D Printer : Anycubic i3 Mega
Topics: thingiverse, Anycubic_I3_Mega, Flowerpots, ToyMakers, stl, Outdoor & Garden, MadeWithTinkercad,...
7
7.0
Apr 3, 2021
04/21
by
André Pietsch (PietschDesign)
data
eye 7
favorite 0
comment 0
So I made a quick design to fit these rubber stripes without holes on the Prusa Face Shields
Topics: thingiverse, Anycubic_I3_Mega, Corona_Faceshield, prusa_face_shield, prusa, stl, Gadgets,...
7
7.0
Apr 4, 2021
04/21
by
Tommaso Giovanzana (TomGio88)
data
eye 7
favorite 0
comment 0
I re-project this simple filament cleaner with a bigger structure and larger wall. V1 - the big one V2 - medium V3 - the little one I print V1. This is a remix of: https://www.thingiverse.com/thing:492067
Topics: thingiverse, Anycubic_I3_Mega, 3D Printer Accessories, i3Mega, filament_guide, stl,...
3
3.0
Mar 10, 2021
03/21
by
Alex (axill)
data
eye 3
favorite 0
comment 0
I'm using https://www.thingiverse.com/thing:2070272 You will need: bearings as described on spool holder link M8 screw 160mm length 3XM8 nuts 4XM4X10mm screw with T nuts
Topics: 3D Printer Accessories, stl, thingiverse, Anycubic_Chiron
7
7.0
Apr 28, 2021
04/21
by
Shane Chrisp (cwispy)
data
eye 7
favorite 0
comment 0
This is a cablechain holder that fits where the old extruder stepper motor used to be after upgrading to the Titan Aero on the AnyCubic i3 Mega.
Topics: thingiverse, Anycubic_I3_Mega, E3D_Titan_Aero, 3D Printer Parts, stl, cable_chain
3
3.0
Apr 17, 2021
04/21
by
Craig Phillips (iwonbigbro)
data
eye 3
favorite 0
comment 0
Created this PCB to aid in the design of Hotend Mounts with integrated PCB holder, or extension for the PCB. I see a lot of designs for holding the PCB, but most aren't clip in. I am using this to design a clip in PCB holder. If requested, I can provide a printable version of this model. Let me know in the comments if you need such a thing.
Topics: 3D Printers, thingiverse, stl, Anycubic_Chiron, Anycubic, pcb, electronics
7
7.0
Jan 16, 2021
01/21
by
Max Kat (MaxKat)
data
eye 7
favorite 0
comment 0
Combined p30 lite Case and dripping VW logo Furthermore I made the case thicker and stronger So this is my recreation of the heavy p30 lite case with dripping VW logo. Hope you enjoy ;)
Topics: case, Anycubic, i3 mega, Anycubic_I3_Mega, thingiverse, cool, handy vw case, p30 lite, p30 lite...
7
7.0
Jan 16, 2021
01/21
by
Alexey Ai (DNKROZRU)
data
eye 7
favorite 0
comment 0
Volcano e3dv6 volcano adapted frontplate, fan mount and BlTouch mount.
Topics: 3D Printer Parts, E3D_v6, Anycubic_I3_Mega, thingiverse, volcano, x-carriage, stl
2
2.0
Apr 20, 2022
04/22
by
Christian Kvasny (ckvsoft)
data
eye 2
favorite 0
comment 0
Mounting bracket with accessories for the Biqu H2 extruder on an Anycubic Chiron
Topics: thingiverse, extruder, Anycubic_Chiron, bltouch_mount, Anycubic, chiron, pcb_holder, 3D Printer...
2
2.0
Apr 19, 2022
04/22
by
Todd Cecil (ToddsWorld)
data
eye 2
favorite 0
comment 0
I wanted to create a simple Infinity Mirror that was printed from my 3D printers. I use an ANYCUBIC Delta as well as an ANYCUBIC Chiron. You will need to have at least a 300mm print base.
Topics: tabletop mirror, thingiverse, mirror_holder, LED infinity mirror, lighted mirror, anycubic, stl,...
2
2.0
Apr 19, 2022
04/22
by
christoph Kralits (AlienAntiChris)
data
eye 2
favorite 0
comment 0
print it up side to Bed , maybe on an Glass surface. Enjoy
Topics: anycubic_vyper, stl, 3D Printer Accessories, thingiverse
7
7.0
Mar 22, 2021
03/21
by
Yannick Persigoux (Kyosuke)
data
eye 7
favorite 0
comment 0
Support for Kossel Linear Plus and Meanwell LRS.
Topics: MeanWell, stl, power_supply, 3D Printer Parts, kossel, thingiverse, Anycubic_Kossel
11
11
Mar 22, 2021
03/21
by
Max (MaXx0r)
data
eye 11
favorite 0
comment 0
It requires taking apart the bottom of the printer and removing the PSU for mounting the case. This modification will not damage your printer. Screws needed: for mounting the RPI to the mounting base: 4x M2.5x10 for the case top and back: 4x M3x10 for mounting it to the printer: 2x M3x15 2xM3 nuts
Topics: stl, Anycubic, case, raspberry_pi_case, 3D Printer Accessories, Ai3M, mount, rpi, Raspberry_Pi,...
11
11
Mar 22, 2021
03/21
by
Jens A. Czaplo (jacun)
data
eye 11
favorite 0
comment 0
Holds 2 40x40x(thickness doesn't matter) fans for cooling board and driver. It also holds the wiring and fits in the original position. The baseplate fits, and doesn't need to be turned for better cooling.
Topics: stl, fan, cooler, i3_mega, 3D Printer Parts, trigorilla, thingiverse, Anycubic_I3_Mega
5
5.0
Mar 22, 2021
03/21
by
Randy S (randy_s)
data
eye 5
favorite 0
comment 0
The original fan shroud mounting arms for the fan were just too flimsy for my taste so I whipped this up. Using a 4mmx30mm screw with washers and nut for the fan mounting, and 2: 3mmx15mm screws with washer for mounting it to the photon. Optional are 2: 3mmx5mm with washer for the other two corners (there is a carbon sponge filter mount underneath that plate that you're mounting to which uses 2 of the four holes, so these were not used for the factory fan.) The original model and this one are...
Topics: 5015_fan_duct, stl, anycubic_photon, 5015_blower, 3D Printer Parts, thingiverse
6
6.0
Mar 22, 2021
03/21
by
Diego Gonzalez (dgTECH3D)
data
eye 6
favorite 0
comment 0
Remix from Ermai to hold the part in the anycubic knob
Topics: dlp, stl, Anycubic, resin_printer, anycubic_photon, resin, 3D Printer Accessories, DLP_SLA,...
4
4.0
Mar 18, 2021
03/21
by
Greg Theron (Eggythetech)
data
eye 4
favorite 0
comment 0
Remix with 120mm fan and new vents Added Bigger Pattern
Topics: fan, 120mm_fan, thingiverse, Anycubic_Chiron, Anycubic, 120mm, chiron, 3D Printing, stl
5
5.0
Jun 21, 2021
06/21
by
Erkan Colak (G3m1n1S3rv3r)
data
eye 5
favorite 0
comment 0
# Marlin 2.0.x for the classic 4MAX ## Attention: Not for '4MAX Pro' version! ## You can find the Marlin 2.0.x for Anycubic 4MAX here: #### Latest release - https://github.com/GeminiServer/GeminiServer-Marlin/tree/4MAX-2.0.5-Release Release files (pre compiled hex files with Lang DE and EN) are now Located in Release Folder. #### Previous release - https://github.com/GeminiServer/GeminiServer-Marlin/tree/4MAX-2.0.4-Release #### Bugfix 2.0.x -...
Topics: thingiverse, 3D Printer Accessories, Anycubic_4max, stl, 4max
5
5.0
Mar 22, 2021
03/21
by
Martti Korhonen (MAK2019)
data
eye 5
favorite 0
comment 0
80mm fan adapter for Predator (D) PSU. Not tested yet, but should do the trick. . 2nd version has holes for anti-vibration fan mounts (work in progress). This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iHC2vzhvOw4
Topics: stl, 3D Printing, Fan adapter, Anycubic Predator, thingiverse, Fan_mount
8
8.0
Mar 31, 2021
03/21
by
Bruno C (dsrq)
data
eye 8
favorite 0
comment 0
Z-axis Camera Mount , for Raspberry Camera V2 Bolts to the Z-axis , You will need 2x M4x12 bolts + washer and Nuts. You may have to Tweak the Camera Housing, tolerances are tight. Bracket Need Support Links and Camera Housing are printed without supports
Topics: thingiverse, anycubic, Anycubic_I3_Mega, i3mega, raspicam, 3D Printer Accessories, support, camera,...
7
7.0
Jun 6, 2021
06/21
by
asdo asda (Morpheu)
data
eye 7
favorite 0
comment 0
Filament guide for Anycubic i3 MEGA
Topics: Anycubic_I3_Mega, filament, i3 mega, pla, mega, thingiverse, 3D Printer Parts, stl, guide
