3
3.0
May 1, 2021
05/21
by
Martin Strohmayer (Smirgold)
data
eye 3
favorite 0
comment 0
Ich habe eine Halter mit Filament sensor für den Anycubic Predator für die Mosaic Palette 2 erstellt.
Topics: stl, thingiverse, 3D Printers, Anycubic_Predator
4
4.0
Mar 15, 2021
03/21
by
Konstantin Anonimous (Alpenstock)
data
eye 4
favorite 0
comment 0
Remixed from https://www.thingiverse.com/thing:3995663 And you need use front plate from https://www.thingiverse.com/thing:2368534
Topics: thingiverse, LCD12864, Anycubic_Predator, stl, 3D Printers
3
3.0
May 1, 2021
05/21
by
Christopher Grimm (Kookaburra88)
data
eye 3
favorite 0
comment 0
Here is my take on an effector for the Anycubic Predator running with Magballs. The effector is designed to allow two 5015 radial fans pushing air directly towards the part, without any airflow directing mechanism. I've milled the upper & lower plate from 5mm aluminium. Used CAD models: 5015 fan: https://grabcad.com/library/radial-cooling-5015-fan-50mm-dc12v-1 4040 fan: https://grabcad.com/library/40mm-dc-fan-1 Threaded heatsink:...
Topics: stl, thingiverse, Anycubic_Predator, 3D Printer Parts
3
3.0
May 20, 2021
05/21
by
minchun Tsai (minchun)
data
eye 3
favorite 0
comment 0
This is a Remix spooler holder for Anycubic predator 3D printer.
Topics: Anycubic_Predator, thingiverse, stl, 3D Printer Parts
3
3.0
Jun 7, 2021
06/21
by
Mikhail Bozhnev (Jazzroutine)
data
eye 3
favorite 0
comment 0
Just small cover. Use super-glue or thermal glue to hold it in place
Topics: Anycubic_Predator, 3D Printer Parts, stl, thingiverse
4
4.0
Mar 21, 2021
03/21
by
Brendan O'Reilly (ThinkAndBuild)
data
eye 4
favorite 0
comment 0
Hi as they send tools out with the printer i had to come up with a idea on where to keep them that would be easy access so in a bit of a rush i came up with this. So far has done well i have used the no tabs version as i added tabs at a later date as a remix of 2portUsbSwitch's tool holder. I hope will come of use to someone and HAPPY PRINTING!!
Topics: stl, 3D Printing, Anycubic, Anycubic_Predator, thingiverse
3
3.0
Jun 7, 2021
06/21
by
Martti Korhonen (MAK2019)
data
eye 3
favorite 0
comment 0
Work in Progress. The printed parts are now ready, well just about anyway. I will divide the parts into smaller groups..(done). The purpose is to route the wires more neatly and probably also the filament. For 13mm wire harness (outer diameter). Assemble: M4 Nuts 9 pcs. M4 Washers 10 pcs. Screws, M4x12 5 pcs, M4x16 4 pcs, 1 x M5x 38 + M5 nut & washer. + a couple of suitable springs. To frame: M5x12 4 pcs and M5 T Slot Nuts pcs. -Parts 1-3, no parts for rerouting the filament, only the wires...
Topics: 3D Printers, thingiverse, Anycubic Predator, stl, project
3
3.0
Jun 6, 2021
06/21
by
Mikhail Bozhnev (Jazzroutine)
data
eye 3
favorite 0
comment 0
Modified internal sensor guide. Added "neck" for better placement and little slope.
Topics: Anycubic_Predator, 3D Printer Parts, stl, thingiverse
2
2.0
Nov 8, 2021
11/21
by
Vladimir Harkonnen (VladimirHarkonnen)
data
eye 2
favorite 0
comment 0
Device to align an arm that has come unglued. I discovered that one of my arms had come unglued, and designed this jig to effectuate a repair. This perfectly aligns an unglued one to a good one so that you can glue it back without fault.
Topics: 3D Printer Accessories, stl, Anycubic_Predator, thingiverse
4
4.0
Mar 31, 2021
03/21
by
Sophie Dupont (Sofille)
data
eye 4
favorite 0
comment 0
Anti vibration foot for Anycubic Predator. Insert a Golf Ball. I stick it with a piece of double face tape
Topics: 3D Printer Accessories, stl, Anycubic_Predator, thingiverse
3
3.0
Jan 6, 2021
01/21
by
crissi wild (coltttaurus)
data
eye 3
favorite 0
comment 0
This is a Pushrod fitting for the Anycubic Predator, it is stronger than the original one, that brokes me off in similar occasions. And its so difficult to get this piece without buying the entire Rod. So I decided to make one on my own. After the Print is done, you only have to put in a Brass Knurl Nut M4 in the Fitting Then cut out a Screw M4, that can fit in the Brass and in the original Fish eye. That´s it.
Topics: 3D Printer Parts, Anycubic_Predator, stl, thingiverse
4
4.0
Mar 22, 2021
03/21
by
Martti Korhonen (MAK2019)
data
eye 4
favorite 0
comment 0
This thing was made with Tinkercad. Replacing the Predator stock board-fan with a 60mm fan. Fasten with original screws or double sided tape. Edit it online https://www.tinkercad.com/things/dYY7R1h3Fdj
Topics: stl, 3D Printing, Anycubic Predator, thingiverse, Fan_mount
3
3.0
Jan 6, 2021
01/21
by
Nick Johnson (hhafq)
data
eye 3
favorite 0
comment 0
clip-on hanger for the Predator hex wrenches, with a slot for a small screwdriver
Topics: stl, predator, thingiverse, Anycubic_Predator, 3D Printer Accessories
3
3.0
Apr 2, 2021
04/21
by
Johny Mattsson (johny_3d)
data
eye 3
favorite 0
comment 0
This is a slight modification to ThinkAndBuild / everyon987's excellent Tool Holder for the Anycubic Predator. This version extends the tops of the tool holder slightly and adds a couple of knobs on the back which hook into the screw holes in the frame, allowing the tool holder to be hung (and removed) easily. To save on filament and not to have to print a lot of supports I've put the knobs separately. Simply glue them (I used CA / superglue) into the provided notches in the back of the tool...
Topics: thingiverse, Anycubic, 3D Printer Accessories, stl, Anycubic_Predator
3
3.0
Mar 19, 2021
03/21
by
Johny Mattsson (johny_3d)
data
eye 3
favorite 0
comment 0
The spool holder arm on the Predator is nice and sturdy, but it isn't exactly low friction for the feeder. This little gadget is a small adapter to sit on top of the regular arm, and when fitted with some spare wheels or ball bearings provides really smooth feeding of filament. In my case I used a spare set of Predator wheels, but similar size ball bearings would work as well. In the absence of either, it would probably still be a significant upgrade to just print some wheels. As you can see, I...
Topics: thingiverse, Anycubic_Predator, Anycubic, 3D Printer Accessories, stl
3
3.0
Apr 5, 2021
04/21
by
Viktor Ovchinnikov (utnpsys)
data
eye 3
favorite 0
comment 0
Topics: thingiverse, Anycubic_Predator, skr_13, stl, 3D Printers
2
2.0
Mar 10, 2021
03/21
by
steffen adamski (ltcdrdata)
data
eye 2
favorite 0
comment 0
Mod of the fanduct
Topics: stl, thingiverse, volcano, Anycubic_Predator, 3D Printer Parts
3
3.0
May 20, 2021
05/21
by
minchun Tsai (minchun)
data
eye 3
favorite 0
comment 0
This is a clip designed to create a box for the Anycubic predator 3D printer. You can directly use the carton board or pearl board to separate the print of Anycubic predator from the outside temperature change, so that a certain printing quality can be maintained during printing.
Topics: 3D Printer Parts, thingiverse, Anycubic_Predator, stl, enclosure
3
3.0
Jan 3, 2021
01/21
by
Duck Dogers (Dckdgrs)
data
eye 3
favorite 0
comment 0
Due to the stock roll stand on the Anycubic Predator being metal, the roll makes an awful sound everytime the spool advances (at first I thought there was something wrong with the printer). Here is a quick drop in sleeve to eliminate the noise and allow the spool to spin a little easier.
Topics: stl, predator, thingiverse, Anycubic_Predator, 3D Printer Accessories
4
4.0
Mar 18, 2021
03/21
by
Julian Chu (seilgu)
data
eye 4
favorite 0
comment 0
as title.
Topics: thingiverse, Anycubic_Predator, fan_duct, 3D Printing, stl
3
3.0
Mar 10, 2021
03/21
by
Kai Andersen (Kaidk)
data
eye 3
favorite 0
comment 0
Increases height for letting you use 2kg rools. Made for ø50 centerholes Printed in PETG, with support from bed only.
Topics: Anycubic, stl, thingiverse, Anycubic_Predator, 3D Printer Parts
3
3.0
Apr 1, 2021
04/21
by
b w (n9jcv)
data
eye 3
favorite 0
comment 0
This is a simple bracket that fits the anycubic Predator. Remove the existing horizontal holder and screw this in its place. Then insert a 5/16 threaded rod. Use with these; https://www.thingiverse.com/thing:767317 Use the Scad to customize for spool sizes.
Topics: anycubic, predator, thingiverse, 3D Printing, stl, Anycubic_Predator
3
3.0
Apr 1, 2021
04/21
by
Josh More (melophat)
data
eye 3
favorite 0
comment 0
This is a pretty simple modification to the Predator Internal Filament Sensor by NexxCat. I simply rounded the edges of the filament entrance hole and the outer edges of the cap. Instructions from NexxCat's design are the same for this, with the exception that I removed the length of bowden tube entirely in step 10 as it wasn't really needed.: Installation instructions are as follows: 1. Print PredatorFilamentGuide.stl, PLA is fine. make sure to orient the print so that the widest round area is...
Topics: 3D Printer Parts, thingiverse, Anycubic, stl, Anycubic_Predator
4
4.0
Jul 22, 2021
07/21
by
Luo Jianxiao (Luo52)
data
eye 4
favorite 0
comment 0
The bracket can be clamped directly to the belt tensioning bracket position as shown in the diagram
Topics: C270, stl, anycubic predator, 3D Printer Parts, thingiverse
2
2.0
Oct 29, 2021
10/21
by
Tobias Kem (tobit6795)
data
eye 2
favorite 0
comment 0
i used this effector: https://www.thingiverse.com/thing:3498613
Topics: thingiverse, 3D Printer Parts, stl, Anycubic_Predator, magball
3
3.0
Jan 3, 2021
01/21
by
Duck Dogers (Dckdgrs)
data
eye 3
favorite 0
comment 0
A clip in channel cover with 30° Bevel for LED lighting strips. The bevel directs the light inward, while the outer lip helps reduce the glare. The STL file is 100mm long, but the user can scale that axis to the desired length.
Topics: stl, predator, thingiverse, Anycubic_Predator, 3D Printer Accessories
4
4.0
Mar 15, 2021
03/21
by
Christopher Grimm (Kookaburra88)
data
eye 4
favorite 0
comment 0
Created a new holder for the flying extruder spings. Attached 2 springs to the printed plate and 1 spring to the front of the extruder. Used it with BMG aero, however it might be also work with other extruder types. Compared to the stock extruder holder, it is significantly lighter and centers the extruder over the hotend, thus the PTFE tube is mostly straight. Added the Fusion360 deign file for customization.
Topics: thingiverse, BMG, Anycubic_Predator, stl, 3D Printer Parts
3
3.0
Mar 24, 2021
03/21
by
Martti Korhonen (MAK2019)
data
eye 3
favorite 0
comment 0
For led lights and other stuff like for example fan controller... and a step or two closer to full enclosure. The last adjustments to those parts have been made now, so they should fit just fine. (Corner pieces and filament holder to go along with them is on the do list). I'm going to move the power switch and probably also the card reader to it, so they are more "collected" in the front (right side),=C. C: at least MUSCCCM On/Off Rocker Switch fits the 3 cut outs (1.8cm x 1.15cm)....
Topics: stl, thingiverse, Predator Enclosure, Anycubic_Predator, 3D Printing
3
3.0
Jan 8, 2021
01/21
by
K Sihota (ksihota)
data
eye 3
favorite 0
comment 0
Here is a quick replacement design for the feed insert on the Predator stock extruder. Updates 22/12/2020 just uploaded a less accurate (relaxed) version that is slightly smaller on the outside and larger on the inside. It may print better with less adjustments in your slicer. SUMMARY I have not tested this as I still have my original and I have replaced my extruder with a BMG clone. It will probably need to be sanded slightly to fit properly If you use it, leave me a comment to indicate if it...
Topics: stl, 3D Printer Parts, Anycubic, thingiverse, Anycubic_Predator
6
6.0
Mar 9, 2021
03/21
by
Gael Sainson (2portUsbSwitch)
data
eye 6
favorite 0
comment 0
I was used to put my tools on the top of the predator Like Newton, I had the idea when I received one on my pliers on the nose :-) This is more a quick an dirty 1st solution but it does the work I have solder the two part and fixed the low part to the predator with a loop of tape.
Topics: stl, thingiverse, anycubic_predator, 3D Printer Accessories, predator
3
3.0
Apr 1, 2021
04/21
by
Gael Sainson (2portUsbSwitch)
data
eye 3
favorite 0
comment 0
Remix of this excellent Anycubic Predator Fan Duct to embed a led ring Warning : I've done a lot of change on my predator. This one works great for me but no guaranty it would still work fine with the stock one .... see here for electronic details : https://www.thingiverse.com/thing:3672535 Beta tester welcome
Topics: predator, 3D Printer Parts, thingiverse, stl, Anycubic_Predator
4
4.0
Jan 3, 2021
01/21
by
Duck Dogers (Dckdgrs)
data
eye 4
favorite 0
comment 0
A clip in channel cover with 30° bevel to mount LED strip lighting on the inside of the arms of the Anycubic Predator. The 30° bevel directs the light toward the centre of the printer, and the outer lip helps shield the user from the brightness of the LEDs. The STL model is 100mm long, but the user can change that axis scale to get the desired length. I used 5V LED strip, with a USB connector run up into the top electronics compartement to a USB hub that also provides power for the Octopi...
Topics: stl, predator, thingiverse, Anycubic_Predator, 3D Printer Accessories
3
3.0
May 1, 2021
05/21
by
Veli Prehti (velluu)
data
eye 3
favorite 0
comment 0
Print this for all 3 rails of Anycubic Predator, glue some magnets and no more your nozzle hits the prints. This is a remix from someones model but I was unable to find the original. Thanks to him anyway. I changed the model to fit widely used neodymium magnets 10 x 5 x 3 mm (these: https://www.aliexpress.com/item/1005001615160677.html?spm=a2g0s.9042311.0.0.47e44c4doJCaD6 ) I also made the structure weaker and made thin line where it would break if something goes between it and the printers...
Topics: stl, Anycubic_Predator, Anycubic, 3D Printer Parts, thingiverse
3
3.0
Jan 8, 2021
01/21
by
Miles M (angrycannibal)
data
eye 3
favorite 0
comment 0
Removed the text, replaced the threaded holes with straight holes(threads that small on an FDM printer don't really work), corrected the hole spacing for and modified the stand offs for the Duet board so the can be printed correctly with up to a 1mm nozzle. Removing the text in particular significantly reduces the print time at least according to my slicer. The the hole spacing was off by about a mm which makes it harder to install, and I found the stand offs were too short if you print it with...
Topics: DuetWifi, stl, 3D Printer Parts, thingiverse, Anycubic_Predator
1
1.0
Apr 19, 2022
04/22
by
Michael Greene (Commod0re)
data
eye 1
favorite 0
comment 0
I got some 20x10x2mm bar magnets off Amazon for this effector, but they don't quite fit on the included probe mount, and it was giving me problems with probing consistency, so I made this alternate version that holds this size bar magnet really nicely, at the right depth for the anycubic probe
Topics: 3D Printer Parts, Anycubic_Predator, thingiverse, predator, stl
3
3.0
Mar 13, 2021
03/21
by
Benjamin Costello (jrockis)
data
eye 3
favorite 0
comment 0
I really wanted to use the Filler filament spool holder for my Anycubic Predator but there was no compatible connector, so I made one. This connects directly to the vertical post that comes stock, replacing the attachment part -- same screws. And it holds it nice and secure. I hope someone else can use this -- it has made a big difference. There is actual friction marks on the stock thing I took off from the spool spinning on it -- that can't be great for my prints. This is smooooooth. Enjoy.
Topics: 3D Printer Parts, thingiverse, Anycubic, Anycubic_Predator, stl
3
3.0
May 20, 2021
05/21
by
Chad Dyke (Waankel)
data
eye 3
favorite 0
comment 0
I widened the clip-in portion to accommodate the Predator, then extruded the shape of some leftover RGB wire I had from a project which can be found here - https://www.amazon.com/gp/product/B06Y4716V7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The wire paths nicely along the aluminum extrusion however at the top there is no route, my next project will be to create a spacer so the wire can be sandwiched between the top corner plates. For anyone who wishes to mimic my setup here are the...
Topics: thingiverse, DIY, Anycubic_Predator, Anycubic_Delta, Anycubic, stl
3
3.0
Apr 5, 2021
04/21
by
Viktor Ovchinnikov (utnpsys)
data
eye 3
favorite 0
comment 0
Topics: thingiverse, Anycubic_Predator, stl, 3D Printers, wire_clip
3
3.0
Apr 2, 2021
04/21
by
KijoT Maker (KijoT)
data
eye 3
favorite 0
comment 0
For change filament 1.75mm to 3mm in extruder titan anycubic
Topics: 3D Printer Parts, thingiverse, Anycubic, stl, Anycubic_Predator
4
4.0
Jan 6, 2021
01/21
by
Veli Prehti (velluu)
data
eye 4
favorite 0
comment 0
Created legs with adjustable height to level the machine and to give ability to get the whole printer up and down. What you need: Rivet nut 3 pcs: https://www.aliexpress.com/item/33051814058.html?spm=a2g0s.9042311.0.0.27424c4dUipLXr Size is M10 Leveling feet 3pcs: https://www.aliexpress.com/item/32968187876.html?spm=a2g0s.9042311.0.0.27424c4dUipLXr Size is M10 I'm thinking of changing the feets to rollers. For example these:...
Topics: stl, Anycubic, thingiverse, Anycubic_Predator, 3D Printer Accessories
3
3.0
Jan 18, 2022
01/22
by
Daniel Costello (zeheeba)
data
eye 3
favorite 0
comment 0
Like many, I either had to strip the paint off of my Predator rails or buy some anodized rails. I decided to go the cheaper method, but your fingers pay the price! After stripping one rail using my fingers and anything I could find that would hit the right spot, I designed this tool to use. This tool will fit right inside the rail and hit the right contact points where the carriages hit. The two large holes are for your fingers to apply pressure with a towel under it. Please wear gloves. :) **...
Topics: thingiverse, tool, Anycubic_Predator, stl, rail, 3D Printer Accessories
3
3.0
Mar 31, 2021
03/21
by
Miles M (angrycannibal)
data
eye 3
favorite 0
comment 0
This is a replacement top mount for Seafax's version 2 cable tidy which can be found here: https://www.thingiverse.com/thing:3624495/ Just felt that the mounting mechanism was a bit lacking, so I made a new one that is a bit sturdier and easier to mount IMO. Can be mounted to either side of the extruder simply by mirroring it. 1. loosen the screws holding the springs to the extruder plate far enough that the tips of the screws are flush with the plate 2. Find a way to clamp the mount to the...
Topics: 3D Printer Parts, thingiverse, cable_management, stl, Anycubic_Predator
4
4.0
Jan 4, 2021
01/21
by
Daniel Gonzalez (Daniv)
data
eye 4
favorite 0
comment 0
This piece is needed, made by gzawahra https://www.thingiverse.com/download:6761811 You need 8 screws of at least M3x12, (I used some that had 3x16) It is a very simple design created to be able to put the panel quickly and that is practical, do not expect a beautiful design ...
Topics: stl, Duet_panel, 3D Printer Parts, thingiverse, Anycubic_Predator
3
3.0
Mar 22, 2021
03/21
by
Martti Korhonen (MAK2019)
data
eye 3
favorite 0
comment 0
Ball size 65mm What you need: Self Tapping Screws (12), 4.1 x 8 - 12mm. M5 (5mm) Flat Washer (6). 2 last pictures: An ongoing project. The purpose is to re-route the wires as well as the filament. the prototype is finally ready. About 15 different parts to print .. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4HTgZ2gKV9g
Topics: stl, 3D Printing, Anycubic Predator, Vibration_dampening, thingiverse, Damper
4
4.0
Mar 15, 2021
03/21
by
Stikka Design (StikkaDesign)
data
eye 4
favorite 0
comment 0
MGN12H for Predator necessary material: 3x 800mm MGN12H to attach the adapter to the linear guide carriage: 12x M3x25mm 12x 15mm spacers 12x M3 washers (optional) to fix the rod holder on the adapter: 3x 2 nuts M4 original M4 screws to fix the linear guide to the upright: TOT M3x20mm (in picture M3x35) TOT M3 nuts (self-locking nuts in the picture) 3x 2 meters of GT2 6mm (optional. reinforced type, in the picture) drill with 3.25mm bit procedure - remove the uprights (pay attention to the motor...
Topics: 3D Printing, linear_rail, thingiverse, MGN12H, Anycubic_Predator, stl
4
4.0
Mar 9, 2021
03/21
by
3D Cáceres Impresionado (Caceres_Impresionado)
data
eye 4
favorite 0
comment 0
New look
Topics: stl, thingiverse, Anycubic_Predator, LED_light, 3D Printer Parts
4
4.0
Mar 8, 2021
03/21
by
Jay (jay_s_uk)
data
eye 4
favorite 0
comment 0
Smart Effector Mount for the Anycubic Predator. I printed in PLA at 0.1mm Layer Height and 50% infill. You can decide how many fans you want. It will fit both the V1.3 and V2 smart effector Update to V2 I've added nut slots to the converter plate as I was getting issues with threads stripping and arms becoming loose. I've also thickened up the ducts as I had a couple drop off. This has required a change to the fan adaptor plates which hold the ducts on. Basically, all the parts have changed....
Topics: Anycubic, stl, thingiverse, predator, Anycubic_Predator, 3D Printer Parts
5
5.0
Mar 31, 2021
03/21
by
DAMIEN bodin (ledams1)
data
eye 5
favorite 0
comment 0
Raise the original fan to accommodate the height added by the Duet 2 Wifi adapter. support for duet 2 wifi https://www.thingiverse.com/thing:4097641
Topics: predator, thingiverse, Anycubic, 3D Printer Accessories, stl, Anycubic_Predator
3
3.0
Jan 7, 2021
01/21
by
Nick Johnson (hhafq)
data
eye 3
favorite 0
comment 0
simple predator corner clip - this just clips on. This is meant to be used to make clip-on attachments with. Make custom tool hangers, etc.
Topics: stl, predator, parts, thingiverse, Anycubic_Predator, 3D Printer Accessories
3
3.0
Mar 26, 2021
03/21
by
Gael Sainson (2portUsbSwitch)
data
eye 3
favorite 0
comment 0
A very simple addon to the predator I was just upset every time the filament was tearing off the cable from the filament detector when the head was going down to start printing This stuff just print simply with support (up side down) and just clips on the filament detector.
Topics: stl, predator, Anycubic, thingiverse, Anycubic_Predator, 3D Printer Parts
