8
8.0
Jun 20, 2021
06/21
by
R M (FDMBot)
data
eye 8
favorite 0
comment 0
Original AC relocation frame cost a lot, compared to the price and age of the car.But for a fraction of that price, you can print and install this "AC relocation frame" model. Made for and tested on LHD car. Frame model isn't free. PM me if you inetersted. Some clips and Caps for BMW E46 Touring for free. https://www.youtube.com/watch?v=iLDkzfAxrDA
Topics: BMW, Automotive, AC Frame BMW E46, Relocation BMW E46, thingiverse, BMW E46 AC, E46, stl, BMW E46,...
1
1.0
Aug 8, 2021
08/21
by
Aapo Saarni (fmn4)
data
eye 1
favorite 0
comment 0
remix of Korino's e46 cup holder to fit my 316i. I also made a reinforced one that should hold better against sun deforming the print I suggest this one if you're printing in PLA.
Topics: bmw e46 316i, thingiverse, e46, bmw e46 cup holder, bmw e46, stl, Vehicles, bmw e46 316, bmw
Topics: manualzz, manuals, BMW E46, Bavarian Soundwerks user manuals, Bavarian Soundwerks service manuals,...
3
3.0
May 1, 2021
05/21
by
Jason Hornberger (jasonhornberger)
data
eye 3
favorite 0
comment 0
Cupholder insert for the rear armrest of BMW E46. The backing is inserted under the leather. Use the backing to mark the location for your cuts. A single slit in the center "web" is also needed to get the backing into the armrest. Carve out the foam as needed to clear the cupholder. Insert the backing, insert the cupholder and use 6 wood screws to hold them together. The screws I used have 4mm outer thread.
Topics: stl, thingiverse, BMW_E46, Automotive
Topics: manualzz, manuals, Bavarian Soundwerks BMW E46 manual, BMW E46 pdf download, BMW E46 Owner`s...
2
2.0
Apr 24, 2021
04/21
by
Charles Benjamin (Chaz2k)
data
eye 2
favorite 0
comment 0
Replacement hood and trunk emblem
Topics: Automotive, stl, BMW_E46, thingiverse
4
4.0
Jun 11, 2021
06/21
by
(sandreezy)
data
eye 4
favorite 0
comment 0
Summary Designed and printed a sunroof handle for my e46 325xi because it was missing one. Found a single listing on eBay for a used one selling for $20 - um..no. hah. So I modeled one based on the pics - couple of prototypes later it was right. This friction fits, no gluing required, and is thin enough to allow the sunroof cover to fully retract when the glass opens all the way:) 2 STL files - one is blank, the other was for myself, it has the 325xi on it which i designed from scratch with...
Topics: sunroof, bmw, BMW_E46, thingiverse, stl
11
11
Mar 18, 2021
03/21
by
Razvan Costel Vladu (spider2077)
data
eye 11
favorite 0
comment 0
Scanned the outline of the original Right Hand to crate a Left Hand, after 2 hours on modeling and measuring and 6 hours on printing finally have the best result. Perfect fit UPDATE ADD 7 more hours in in the left hand one witch after final print when i took it to the car it did not fit, so i had to go back to modifying it now both Right and Left Hand drive fit perfectly. Sorry if anyone had trouble with it
Topics: BMW, Automotive, stl, BMW_E46, thingiverse
11
11
Jan 14, 2021
01/21
by
Alex Lait (_ZincBoy_)
data
eye 11
favorite 0
comment 0
This is a 3d printable connector that allows you to replace the rear amplifier in a E46 BMW Harman Kardon system. No need to cut off the connector or splice wires, just plug and go. The factory retention and eject system for the connector is retained. This connector also applies to other cars (BMW) with the same audio system. I used a dual row 0.1" pitch header with some pins removed for the electrical contacts. The header was soldered to a carrier PCB and the wiring was then fanned out to...
Topics: thingiverse, Automotive, BMW_E46, stl, BMW
5
5.0
Mar 4, 2021
03/21
by
Aleksandar Delic (delke93)
data
eye 5
favorite 0
comment 0
Join all parts and stick with super glue.
Topics: thingiverse, BMW_E46, Vehicles, stl, clip
9
9.0
Jan 14, 2021
01/21
by
Alex Lait (_ZincBoy_)
data
eye 9
favorite 0
comment 0
These are speaker adapter mounts for BMW E46 front doors. There is a mount for both the tweeter and woofer. The mounts are designed for a JL Audio C3-525 component set but I have included generic .stp files for the mounts to adapt the design for your speakers. The woofers are screwed into the printed adapter rings and then the factory mounting screws are used to fix them to the door card. The tweeters clip into the mount with a twist and are held with integrated springs. The tweeter mounts also...
Topics: thingiverse, Automotive, BMW_E46, stl, BMW
2
2.0
Mar 25, 2021
03/21
by
Quinn Casey (qcasey1)
data
eye 2
favorite 0
comment 0
My wind screen mounts got old and broke off, and I don't have a wind screen. These are designed to cover up the gaping hole. Not a perfect fit but definitely good enough - it won't fall out. PETG or ABS required for a hot car.
Topics: stl, BMW, thingiverse, Automotive, BMW_E46
2
2.0
Apr 5, 2021
04/21
by
Razvan Costel Vladu (spider2077)
data
eye 2
favorite 0
comment 0
BMW e46 M3 Paddles
Topics: thingiverse, BMW_E46, stl, Automotive, BMW
4
4.0
Mar 15, 2021
03/21
by
Angel Colón (usernamemio)
data
eye 4
favorite 0
comment 0
Angular to fix e46 subwoofer broken tabs.
Topics: e46, coupe, thingiverse, BMW_E46, Harman_Kardon, subwoofer, BMW, subwoofer_grill, Automotive, stl,...
4
4.0
Jun 10, 2021
06/21
by
Sandro Surabischwili (sandreezy)
data
eye 4
favorite 0
comment 0
UPDATE 5/14/2020: Thinned and shallowed the dimensions slightly to eliminate risk of it catching on on roof trim as the cover retracts. Should be fine now! Designed and printed a sunroof handle for my e46 325xi because it was missing one. Found a single listing on eBay for a used one selling for $20 - um..no. hah. So I modeled one based on the pics - couple of prototypes later it was right. This friction fits, no gluing required, and is thin enough to allow the sunroof cover to fully retract...
Topics: Automotive, bmw, BMW_E46, thingiverse, stl
3
3.0
Apr 1, 2021
04/21
by
tom fischer (tomfischer777)
data
eye 3
favorite 0
comment 0
this is an cover for the screws in the door panel of an BMW E46 (Compact)
Topics: BMW_E46, bmw, thingiverse, e46, Parts, stl
8
8.0
Jan 16, 2021
01/21
by
Ivan Kopic (kokss3)
data
eye 8
favorite 0
comment 0
This is 6,5in (165mm) speaker adapter for BMW E46. Provided two variants with ring around speaker or bare 4mm height. I use later and works fine. I have put infill 20% and layer height 0,2mm.
Topics: speaker, thingiverse, Automotive, BMW_E46, stl, BMW
2
2.0
Mar 31, 2021
03/21
by
Practical Prints (PracticalPrints)
data
eye 2
favorite 0
comment 0
This is a plug for the headlight washers on an E46, my pump was leaking and I decided to just blank it off rather than replacing it.
Topics: E46, Automotive, BMW_E46, thingiverse, BMW, stl
3
3.0
Aug 22, 2021
08/21
by
Adam Swidzinski (adamswid)
data
eye 3
favorite 0
comment 0
Designed to connect m54 DBW throttle with older M50 manifold. Can be used in few ways. To add to older engine DBW throttle or to mount to M54 engine better flowing manifold.
Topics: BMW_E46, BMW, m54b30, Automotive, stl, thingiverse
3
3.0
Mar 25, 2021
03/21
by
Lennard Dohrmann (l_d)
data
eye 3
favorite 0
comment 0
The holes in my floormats for the stock pins wore out over the years and the original pins started slipping through. I also lost a few, and knowing that not every mat had all its pins kept scratching at my brain stem so I designed these. Just print how ever many you like and glue them together with superglue. Since this is a simple part print settings shouldnt matter that much. Have fun!
Topics: stl, car, thingiverse, floormat, Automotive, BMW_E46
8
8.0
Apr 16, 2021
04/21
by
Alex Lait (_ZincBoy_)
data
eye 8
favorite 0
comment 0
Do you have an CD53 BMW with a radio that has a broken volume knob? This is a part to fix that. The CD53 radio has a volume knob that you push to power on/off the radio. It seems common for this to get broken with too hard a push and you will no longer be able to turn the radio on or off. The cause is the white plastic support for the knob encoder that breaks where the knob back screws in. The part is a duplicate of the factory one with stronger bosses where the screws thread into the plastic....
Topics: bmw, e46, bmw_e46, thingiverse, stl, Automotive
6
6.0
Mar 16, 2021
03/21
by
ignacio anzola (Peditosuruguay)
data
eye 6
favorite 0
comment 0
Impreso en anet A8 con PLA, lleva un remache o tornillo pasante para la sujeción, yo imprimi 5 y le va un buen soporte. Printed on Anet A8 with PLA, it has a rivet or through screw for fastening, I print 5 and it goes a good support.
Topics: BMW, bumper, Automotive, stl, BMW_E46, thingiverse
6
6.0
Apr 20, 2021
04/21
by
Petr Hlavatý (VIRUSX)
data
eye 6
favorite 0
comment 0
This thing can fix the problem with part nr. 54 13 8 246 027 Instead of buying the "kinda expensive" set for sunroof fix, i have decided to print the broken piece and fix it on my own. Not perfect, without rubber ends, but it somehow fixes the problem with sunroof sliding of the rails. Use PET or ABS because of high temperature exposure. I just used the broken part, got rid of all the plastic part with pliers and replaced it with this print. Test fit it and before use, add a drop of...
Topics: thingiverse, e46, BMW, stl, Automotive, BMW_E46
3
3.0
Mar 9, 2021
03/21
by
Edvard Ehiloo (EEdvard)
data
eye 3
favorite 0
comment 0
When I bought a E46 Compact it had broken rear shelf retaining clip. So whenever I opened the trunk the shelf would hang randomly in the air. Also it made closing the trunk hard, as it jammed between the trunk lid and the body of the car. So I decided to make a model of the broken shelf clip, that came with the car. It may need some sanding or filing to achieve a better fitment in the shelf steel tube.
Topics: BMW, BMW_E46, stl, thingiverse, Automotive, e46
5
5.0
Jan 21, 2021
01/21
by
adam dow (CarnageGraphics)
data
eye 5
favorite 0
comment 0
Fixes the third brake light from falling off the glass. replaces the usually broken clips.
Topics: BMW_E46, Automotive, thingiverse, e46, BMW, stl
3
3.0
Mar 5, 2021
03/21
by
Vladimir Rodman (wqwerty)
data
eye 3
favorite 0
comment 0
+ Repair part for windows regulator on bmw e46 and e53. + Original part costs 5,20€ or 10 min 3d printing. + 10 NM stable. + No rust. - Need a screw-thread tool to add M6 thread. Please be sure to use a high temperature resistant filament or try annealing for PLA. PLA isn´t stable enough to resist summer sunshine. One of printed parts at my car was broken by very hot weather.
Topics: Automotive, stl, BMW_E46, repair_part, thingiverse
1
1.0
Apr 19, 2022
04/22
by
Casey Relkin (eggyvevo)
data
eye 1
favorite 0
comment 0
Print standing vertically, Coat with a clear Just glue on your trim and push it on
Topics: thingiverse, BMW_E46, e46, Other, repair, stl
1
1.0
Jan 6, 2021
01/21
by
Vaclav Subert (v4sek)
data
eye 1
favorite 0
comment 0
Just a simple plug for the hole after idle control valve delete on the m54 engine. Made according to the template on the MS4x wiki. Printed from TPU and PC. Prints without any supports. Not tested yet on the engine!
Topics: stl, e46, Automotive, BMW_E46, M54, thingiverse, plug
2
2.0
Jan 14, 2021
01/21
by
matt roche (archbid)
data
eye 2
favorite 0
comment 0
The carpeted panel on the interior of the E46 touring hatch is tricky to remove, and often the retaining clips are broken. I have created these two clips which can be epoxied in place to return normal function. In order to use them, completely cut the broken part of the clips out as shown in the photo then, use an epoxy like JB Weld liberally - the holes provide a mechanical bond for the epoxy. Note there are a right and a left. I did not create the center clip.
Topics: thingiverse, Automotive, BMW_E46, stl, e46, bmw_325i
2
2.0
Apr 1, 2021
04/21
by
tom fischer (tomfischer777)
data
eye 2
favorite 0
comment 0
This is an cover, that goes over the blank screws on the driverside of an BMW E46 (Compact).
Topics: BMW_E46, bmw, thingiverse, car, e46, Parts, stl
1
1.0
Apr 19, 2022
04/22
by
Wout Niet (woutnieuw93)
data
eye 1
favorite 0
comment 0
Adapter to mate the TB of your M52TU or M54 engine to a M50B25 intake swap.
Topics: thingiverse, BMW_E39, BMW_E46, Tools, BMW, stl
2
2.0
Mar 15, 2021
03/21
by
Vitezslav Castka (Vincentpartman)
data
eye 2
favorite 0
comment 0
Its just a cover repair.
Topics: e46, thingiverse, BMW_E46, Automotive, stl, bmw, repair
4
4.0
Jan 4, 2021
01/21
by
Pedro Pereira (carecaz)
data
eye 4
favorite 0
comment 0
12v lighter cap for BMW E46 M Style
Topics: stl, Automotive, BMW_E46, BMW, thingiverse, BMW_M
3
3.0
Mar 5, 2021
03/21
by
adam scott (commanderkeen)
data
eye 3
favorite 0
comment 0
This is something I designed for the headlights on my car. I wanted to convert to xenon so I bought projector inserts whose clips didn't hold the bulbs very well. I haven't figured out how to seal them yet but they seem to hold. I printed it oriented as it is, manually supported the 'wings' as they are slightly higher than the 'pressure' face.
Topics: Automotive, stl, e46, BMW_E46, headlight, BMW, thingiverse
2
2.0
Apr 24, 2021
04/21
by
Juan Medina (youngjc)
data
eye 2
favorite 0
comment 0
Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with PETG, can be printed with TPU to remain flexible. 1999-2001 BMW Inlet Duct 13-71-1-438-768
Topics: Hose, Automotive, BMW_E46, stl, e46, Tube, thingiverse
4
4.0
Jan 7, 2021
01/21
by
Henri Huhta (Henutin)
data
eye 4
favorite 0
comment 0
BMW original part number: 51-16-2-239-737. One side is originally straightened up. 1:1 replica from original clip.
Topics: stl, E34, Vehicles, BMW_E46, BMW, thingiverse, E30
1
1.0
Jul 22, 2021
07/21
by
William Lindfors (RaZtar)
data
eye 1
favorite 0
comment 0
Designed this "bolt" for my BMW E46 and it fits like a glove. Printing: Whatever really, I used a Flashforge Adventure 3 and used the standard settings but chose the low (fast) selection since it started as a prototype but it worked out just fine the way it was. Used PLA Feel free to use however you wish.
Topics: e46, Automotive, e46_bmw, BMW_E46, stl, thingiverse
3
3.0
Mar 5, 2021
03/21
by
Angel Colón (usernamemio)
data
eye 3
favorite 0
comment 0
This will replace the BMW E46 Headlight horizontal/vertical adjustment screw that goes inside the headlight housing. I accidentally broke mine when adjusting them. These are hard to find on the internet so I decided to design a new one. **V3 is ready, better if printed with Alloy 910 filament or similar.**
Topics: stl, adjuster, Parts, BMW_E46, headlight, BMW, thingiverse
3
3.0
Apr 13, 2021
04/21
by
Aaron (sutekh)
data
eye 3
favorite 0
comment 0
When upgrading to a higher flow pump (e.g., Walbro, TRE, etc.), or simply replacing the expensive stock pump with any of the myriad of cheap alternatives, you'll likely need a spacing sleeve to adapt the stock pump carrier to the smaller diameter universal pumps and locate it at the proper height. There are several machined aluminum parts available online, but they're quite expensive for what they are (enough to buy 2-3 spools of nylon filament). 3D printing to the rescue! This sleeve should...
Topics: thingiverse, fuel, walbro, Automotive, stl, BMW_E46, bmw, pump
2
2.0
Mar 16, 2021
03/21
by
Timothy Vermeersch (Mr_Sham033001)
data
eye 2
favorite 0
comment 0
A 52mm gauge pod meant to fit into the driver side air vent. Fits into the factory vent fin mounting holes.
Topics: thingiverse, BMW_E46, BMW, Automotive, gauge, stl, Vent, 52mm
0
0.0
Apr 20, 2022
04/22
by
Victor Reyes (vreyes7)
data
eye 0
favorite 0
comment 0
e46 sunroof handle, not 100% accurate, in case you broke yours when refurbishing the cover
Topics: thingiverse, Vehicles, BMW_E46, e46, BMW, stl, handle, sunroof
4
4.0
Jan 6, 2021
01/21
by
Emmanouil Fylladitakis (Zinoberrot)
data
eye 4
favorite 0
comment 0
BMW M43 engine throttle covers tend to break easily and the dealership wants $120 for it. Instead of leaving the engine without a cover, I simply designed my own iteration of it.
Topics: stl, Automotive, BMW_E46, car, BMW, thingiverse, car_parts
4
4.0
Mar 25, 2021
03/21
by
Clemens Roß (Barbarossi)
data
eye 4
favorite 0
comment 0
A Friend of mine lost one of the adjustment Knobs of his E46 Cabrio, you can buy it for the bargain of 180€, after 1h of modeling in Fusion360 the cost sank to 50ct a piece
Topics: stl, knob, car, BMW, thingiverse, seat, Automotive, BMW_E46
8
8.0
Jan 20, 2021
01/21
by
Sid Micious (sidmicious)
data
eye 8
favorite 0
comment 0
Jack stand pad for BMW (E46) The thing I made 2 years ago had broken, added some improvement and remade it. Dividing the upper part and the lower part, it is possible to make the thing easily, strong, and beautiful . Printing the lower part in the direction such as the photo, it prevent to break easily. Please glue two parts together by acetone etc. It is good for modeling the lower part to fit your own jack stand. (My jack stand: EMERSON EM-25) https://jibundeyarou.com/umablock2/
Topics: jack, BMW_E46, Automotive, thingiverse, BMW, stl, jack_stand
4
4.0
Mar 25, 2021
03/21
by
Very Possible (Very_Possible)
data
eye 4
favorite 0
comment 0
This is a fully adjustable rear lower control arm for the BMW E46. Not exact specs to fit on the car, more of a concept of design.
Topics: stl, e46, BMW, car_parts, thingiverse, Automotive, BMW_E46
1
1.0
Jan 19, 2022
01/22
by
Justin Memmesheimer (Justinmemme23)
data
eye 1
favorite 0
comment 0
Fix your sloppy shifter with this bushing for inside the shift rod selector joint
Topics: BMW, PLA, thingiverse, BMW_E46, Bushing, 3D Printing, stl
4
4.0
Jan 6, 2021
01/21
by
Jörgen Raja (JorKsX)
data
eye 4
favorite 0
comment 0
e46 52mm gauge panel. There is no way back to stock with this part. I think this was best solution for 52mm gauges. I did not want to block any of the AC vents with holes or gauges and there was no other place to put these so I improvisied. !!!!!!!!!!! Requires to cut out ash tray and cigarette lighter part. !!!!!!!!!! I did mine with torch and knife.
Topics: stl, e46, 52mm, Automotive, BMW_E46, BMW, thingiverse, gauge
3
3.0
Apr 5, 2021
04/21
by
upen do (eezeh)
data
eye 3
favorite 0
comment 0
Seal driver printed for installing output shaft seals on the rear differential of a BMW E46 Printed in PETG.
Topics: thingiverse, BMW_E46, SEAL DRIVER, differential, stl, BMW, Automotive
5
5.0
Jun 11, 2021
06/21
by
(FDMBot)
data
eye 5
favorite 0
comment 0
Summary BMW E46 Double Din AC Relocation Bezel. You don't need to buy a 160+USD special frame for A/C relocation after Double Din Head unit installation. You can use yours. If you interested in this bezel, contact me by PM. Model isn't free, but it will cost you multiple times less than original frame. https://youtu.be/iLDkzfAxrDA Print Settings Printer: Ender 3 Direct Drive Mode Supports: Yes Resolution: 0.2 Infill: 35+ Filament: Devil Disign PETG ABS
Topics: bezel, AC Relocation, Double Din, thingiverse, BMW E46, stl
4
4.0
May 1, 2021
05/21
by
Zsolt Hévizi (Hevizizs81)
data
eye 4
favorite 0
comment 0
The mirror adjuster on my E39 stopped moving the mirror in left-right direction, however I could still hear the small motor working. After removing the mirror plate, I found a small plastic component broken. Of course you can't buy this part, only the whole assembly (the one where I marked the pins with red arrows) for 100 USD :). Based on the broken component, I copied the part and printed it. It works perfectly!! Please note that if you need this for up-down motion, you will need to mirror...
Topics: stl, BMW, BMW_E46, mirror, thingiverse, Other, BMW_E39
