11
11
Apr 30, 2021
04/21
by
ALBERT LORR (mxvris)
data
eye 11
favorite 0
comment 0
This is my first 3d designed thing! Anyway, I wanted a mount for my microphone to keep it off the desk and there wasn't much out there :)
Topics: stl, Audio, yeti_microphone, blue_yeti, thingiverse, yeti
3
3.0
Oct 14, 2021
10/21
by
Ben Naylor (b_n)
data
eye 3
favorite 0
comment 0
I saw a bunch of the other microphone mounts, but I wanted one that was going to be as compact as possible - and thus I redesigned it from scratch (e.g. no remix, but inspiration from many). This is designed to be mounted on the IKEA Lamp stand, with an additional locking hole to stop drooping (you will need to drill this yourself). Parts list: - 1x HolderRing - 2x LeftLoopHolder - 2x RightLoopHolder - 2x BodyMount - 4x M4 nut - 4x M4 10mm hex bolts (6.9mm head diameter) - ~50cm elastic cord (I...
Topics: microphone_holder, thingiverse, Microphone, stl, yeti, Audio, yeti_holder, blue_yeti,...
11
11
Apr 17, 2021
04/21
by
Marc Spess (Animateclay)
data
eye 11
favorite 0
comment 0
Here is a remix of the Phone Mount by doctriam. The arms are surprisingly strong. Strong enough to hold up the Yeti Blue microphone! Make sure you use at least 85% infill on parts nearest the desk connector and use supports. I originally used 24% infill PLA and one of the threaded rods broke. 85% held up great! The desk connector part needs 4 small common wood screws. The holes are off-set and the width between the two side pieces matched the MDF on my particular desk. Make sure to print it...
Topics: thingiverse, stl, blue_yeti, Audio, usb microphone
7
7.0
Jun 20, 2021
06/21
by
Dmitry Rodetsky (dmitryr117)
data
eye 7
favorite 0
comment 0
Recommend the use of PETG for this thing. Will require elastic, screws and the same type of attachment screw as the one used to attach yeti directly to mic stand.
Topics: Audio, shock, thingiverse, stl, Yeti, blue_yeti, absorber
5
5.0
Apr 20, 2021
04/21
by
The Thing (CuriousConstruction)
data
eye 5
favorite 0
comment 0
This is a custom mount I created for my Blue Yeti Microphone. It comes in three pieces with an option 4th piece. It is designed and oriented so that it should not need any supports. Print the base, upper and inner rings. The upper ring attaches to the base with your glue of choice. Use elastic cord, rubber bands or possibly string/para cord of some kind by looping it back and forth through the provided holes in the upper and inner rings. See photo if that doesn't make sense. This design is...
Topics: thingiverse, Yeti, stl, Microphone Base, Yeti Microphone, Electronics, Blue Yeti, Microphone Stand,...
