4
4.0
Mar 9, 2021
03/21
by
Oliver R. (terrorhai)
data
eye 4
favorite 0
comment 0
Hey from rainy germany, that's my custom made control box for the MKS Gen L + 3D Freunde MOSFET V2. You should use 2x 40mm fans in the front to get enough cooling.
Topics: MKS_Gen_L, control_box_cover, stl, thingiverse, ender3_control_box, MKS_Gen, MKS_Control_Box,...
5
5.0
Mar 3, 2021
03/21
by
Alexandro D'Amore (alexdam92)
data
eye 5
favorite 0
comment 0
I designed this control box case, because i wanted to reduce the control box fan noise replacing all stock fan with noctua fan. The original 60mm fan is 15 mm thick, but the noctua fan (A6X25 PWM) is 25 mm thick, so it's impossible to close the control box correctly and you need to print this control box case. You don't need any new screw, because everything is designed to fit with the original screws + screws in noctua package. With this download you'll have: - control box case - little feet...
Topics: 3D Printer Parts, control box, CR10, thingiverse, cr10s, control box cr10 fan, control box leg,...
5
5.0
Mar 17, 2021
03/21
by
yamil corco (yamilongianops)
data
eye 5
favorite 0
comment 0
Inventor files... archivos inventor. Hi! I call this design “La Bota” is perfect for the ones that want to make an improvement in your Creality Ender 3 and want to move all the electronics in this Control Box. You can save in this Control Box the next stuff: • Arduino board • 3 Tl Smoothers • 1 Raspberry • 1 Stock motherboard of Creality Ender 3 • 1 Fan 3010 of 5v • 1 Fan 4010 (stock) • This control box have acces to all the ports of the boards • Acces for the SDcard of...
Topics: caja electronica, enclouser, 3D Printer Accessories, creality_ender_3, Ender_3,...
9
9.0
Jun 20, 2021
06/21
by
Anthony Harmon (ShadowWeaver2067)
data
eye 9
favorite 0
comment 0
This Control Box is a simple mod on the Black Widow control box that uses exiting Black Widow Control box parts of the Sides and the Smoked Clear Top panel. As this is a first run edition there may be some modifications you need to make to have it work for you. At this time I added 8 larger 4mm hex cap screws than the ones that came with the Black Widow Control box. If you have assembled the Black Widow Control box adding these parts will not be an issue. This is a work in progress, I currently...
Topics: black_widow, thingiverse, 3D Printer Accessories, MKS Control Box, stl, control_box_cover,...
6
6.0
Jan 19, 2021
01/21
by
John Doe (pregananant)
data
eye 6
favorite 0
comment 0
Originally the control box of my Wanhao Duplicator i3 V2.1 was standing on its M3 screw heads. This led to very low grip between the table and the control box. So, I made this flexible feet that can be stuck on the screw heads. I used NinjaFlex filament.
Topics: Control_box, 3D Printer Accessories, thingiverse, control_box_feet, Wanhao_Duplicator_I3,...
3
3.0
Jun 21, 2021
06/21
by
PicoPlanet Developing (PicoPlanetDev)
data
eye 3
favorite 0
comment 0
This is a replacement for *base.stl* in https://www.thingiverse.com/thing:1957761/ that includes cutouts to reduce printing time and adds a spot for a marine screw terminal to be connected. It reduces the print time on my Black Widow from 24 hours to about 12. I recommend printing it in a strong PETG filament because it will not have as much inherent strength in the design. Will upload photos once it is printed.
Topics: control, tevo_upgrade, tevo, tevo_3d_printer, thingiverse, MKS_Control_Box, stl, control_box_cover,...
11
11
Jan 18, 2021
01/21
by
Bryan Gill (BG32940)
data
eye 11
favorite 0
comment 0
I needed a new housing for my MKS v1.4, Power Supply, and 3.2" Touch Screen and landed on this. I'm printing it in Hatchbox White 1.75mm PLA. I have designed it to be either glued or drilled and screwed together. I"ll be doing the latter.
Topics: 3D Printer Accessories, Control_box, stl, thingiverse
3
3.0
Mar 9, 2021
03/21
by
Weytjens Bjorn (BjornWeytjens)
data
eye 3
favorite 0
comment 0
- Ender 3 control box cover - left or right model - over extrusion placement with original screws - fully closed - with SD card reader No support needed for printing, support is build in and can be broken away after print
Topics: control_box_cover, stl, thingiverse, Creality, Ender, Ender_3, creality_ender_3, Control_box, 3D...
3
3.0
May 20, 2021
05/21
by
Dennis S. Jacobsen (Anarasha)
data
eye 3
favorite 0
comment 0
**Update:** I am currently working on V2! V2 will feature hinges, magnet close instead of screw close, much easier access and an external LCD platform. I am gonna leave this one up, but I think V2 will be much more exciting ------------------------------ Yes, another one. I was moving my electronics out of my enclosure and got tired of having the electronics and the LCD as seperate parts. Furthermore, I wanted it all to rest on top of the PSU so I could cool mainboard, Pi and PSU with a single...
Topics: ender_3, 3D Printer Parts, control, controlbox, thingiverse, control_box, controlbox_ender3, ender,...
13
13
Jan 18, 2021
01/21
by
Matthew Lisewski (Lisewskimas)
data
eye 13
favorite 0
comment 0
This is my second stab at an integrated control board to sit under the TronXY X1. First version you can find here: https://www.thingiverse.com/thing:2347275 For version 2 I wanted something that was A) easier to print B) easier to assemble C) looked nicer D) had a smaller footprint It now prints cleaner, needing less supports, and will take fewer total prints to finish. I widened the tolerance on the dovetails to make them snap together easier. There is also much more space behind the display...
Topics: 3D Printer Parts, case, TRONXY, 3d_printer, Control_box, thingiverse, TronXY_X1, Control_Board,...
11
11
Jan 10, 2021
01/21
by
Steve Allen (thephatmaster)
data
eye 11
favorite 0
comment 0
Designed to allow you to mount the control box to the right hand side of your printer frame. Stops it being all annoying and hard to carry. To fit simply drill 2x holes in your frame (check your hardware clears the z axis moving parts). Ignore the MASSIVE holes in my picture - a littel confusion between radius and diameter! they are 5mm in the .stl file supplied. I have designed it to fix onto control box via the factory holes for the spool holder (I have these on my v1 duplicator). I've...
Topics: thingiverse, Control_box, Wanhao_Duplicator, stl, Wanhao_Duplicator_I3, 3D Printer Parts,...
2
2.0
Dec 1, 2021
12/21
by
Ban Dare (Wickedsin)
data
eye 2
favorite 0
comment 0
Works for Free
Topics: Control box, 3D Printing, thingiverse, lightsaber, stl, Saberforge
2
2.0
Sep 13, 2021
09/21
by
Joshua May (Joshuam19)
data
eye 2
favorite 0
comment 0
This a custom design for the openBulletFeeder control box. The controller I used is the CCM5D with a power switch and a PWM dial. I have not installed this on to the feeder yet so the screw holes may not be aligned correctly. Print with TREE supports so you can remove them easily.
Topics: stl, thingiverse, 3D Printing, openBulletFeeder, CCM5D, Control Box
3
3.0
May 1, 2021
05/21
by
Thomas Kekeisen (thomaskekeisen)
data
eye 3
favorite 0
comment 0
So i bought that eBike tandem and the control box was mounted in a way it scratches agains the chain. Then I mentioned that it just was attached in a very bad way and the screws on the top can be used to mount the control box save in place. This fits a frame with a diameter of about 25mm.
Topics: stl, ebike, bike, control box, Sport & Outdoors, thingiverse, outdoor
3
3.0
Mar 19, 2021
03/21
by
Özkan Kaçan (ozkankacan)
data
eye 3
favorite 0
comment 0
I 've used Tevo Tarantula Control Box by rebeltaz as the base. I have changed these things for my personel useage: >>> I added to TEVO logo and Tevo Tarantula text at the front panel. >>> I added to hole for 80 mm fan at the top panel, and I deleted fan hole from the right panel. >>> I added to switch button hole at the right panel. >>> I added to extra cable holes at the back panel.
Topics: tevo_tarantula, tevo_upgrade, display_case, tevo, MKS_Base, mks_gen_v14, control box, tarabtula...
9
9.0
Jan 17, 2021
01/21
by
Errol Aguinsatan (RobFlip)
data
eye 9
favorite 0
comment 0
This is an optional board enclosure for Tevo Tarantula. This enclosure can house the motherboard, a cooling fan from 40mm to 60mm and a mosfet as shown in photos. other mosfet dont fit. Also, you need a large bed to print this enclosure (at least 200x220). There are two version for the enclosure, one with Tevo logo and the other don't have, your choice. You will need: - Hand tap m3x.5 - Flat head M3 90 degree countersunk screw for the cover Step files are included so remix/share/modify etc I...
Topics: 3D Printer Parts, Control_box, thingiverse, tevo_tarantula, stl
4
4.0
Jan 5, 2021
01/21
by
Kaa Kee (Kallee)
data
eye 4
favorite 0
comment 0
This is a remix from the left side of the Tevo Tarantula Control Box by rebeltaz. https://www.thingiverse.com/thing:2285617 In this Remiix i deleted the opening for the SD-Card, because i only print from my raspberry.
Topics: tevo_tarantula, Control_box, stl, 3D Printer Parts, thingiverse
8
8.0
Jan 20, 2021
01/21
by
TonyP (shk1d29)
data
eye 8
favorite 0
comment 0
Work in progress. I was tired of the 90 degree front of the control box of my Geeetech i3 A Pro so I made an adapter to make it 50 degrees. Makes it easier to see the screen and adjust/use the control knob.
Topics: 3D Printer Parts, aluminum pro, control box face, Control Box, thingiverse, i3 A pro, aluminum,...
6
6.0
Mar 18, 2021
03/21
by
Kyle Griffiths (DirtyWhiteBoy)
data
eye 6
favorite 0
comment 0
The Ender_5 control Box offers mounting for the MeanWell_LRS_350_24 Power Supply, Mainboard controller, Fan, LCD, and an optional shelf for TL Smoothers, while at the same time utilising all the stock hardware. 12 hour print time (THERES AN ERROR REGARDING SHELF SIZE ) WILL BE FIXED/UPDATED WHEN I GET THE CHANCE.)
Topics: Ender_5, MeanWell_LRS_350_24, LCD_Mount, 3D Printer Parts, power_supply, stl, Ender_5_Control_Box,...
7
7.0
Jan 19, 2021
01/21
by
Oleg Starostin (OstinStar)
data
eye 7
favorite 0
comment 0
Tevo Tarantula is an excellent 3D printer, but the power system is too simplistic and because of this the printer is difficult to move. First I made a box with two switches - power and an additional fan, but then I set the backlight of the nozzle and the buttons became three. Power goes through the HT60 connection. Fastening of a cover and a clip ХТ60 is carried out by screws 2.5 mm diameter. Spacer Plate needs to divide Control Box from bolts of Z axis wheels.
Topics: Control_box, 3D Printer Accessories, control, thingiverse, tevo_tarantula, stl
3
3.0
Mar 13, 2021
03/21
by
victor rodriguez (VRMAKER)
data
eye 3
favorite 0
comment 0
I have designed this lifting legs for my control box and give better air circulation for the power source fan
Topics: 3D Printer Accessories, thingiverse, Creality, CR10, CR10S5, stl, Control_box
5
5.0
Mar 3, 2021
03/21
by
remote coderz (remotecoderz)
data
eye 5
favorite 0
comment 0
I originally printed these legs for the control box of my CR-10S S4: https://www.thingiverse.com/thing:3178556 but once you install them, it's best not to move it around because the legs are wobbly. So I created a bracket that can screw onto the legs (some drilling with a 2.5mm drill bit required) and reinforce everything. It's a simple bracket so please don't get too excited. You must use a 300x300 print volume printer as these supports are 275mm wide.
Topics: 3D Printer Parts, Control box, thingiverse, supports, stl, CR-10
8
8.0
Apr 17, 2021
04/21
by
(TwistedIdeas)
data
eye 8
favorite 0
comment 0
Now that the MPCNC has progressed to having independently controlled X and Y stepper pairs I wanted to adjust this to take my new configuration rather than try to split out the cables on the existing plugs.
Topics: MPCNC_Add-On, MPCNC control box, MPCNC, thingiverse, stl, DIY
10
10.0
Jan 12, 2021
01/21
by
David Mottram (Dimwit-Dave)
data
eye 10
favorite 0
comment 0
Size - (Pole Version = 80mm x 49mm x 36.5mm) and (Wall Version = 80mm x 69mm x 30.5mm) Project box that can be either wall or post mounted. Although it's not totally sealed it could be used outdoors for low voltage projects. Ideal for weather sensors, outdoor lighting or ornamental features. The case uses 6off No2 6.5mm screws, 4 for the PCB and 2 for the case. Also 2off No4 9.5mm for the cable strain relief.
Topics: outdoor_lighting, thingiverse, Electronics, Control_box, stl, project_box, ESP8266
4
4.0
May 1, 2021
05/21
by
Preston King (Pdogman)
data
eye 4
favorite 0
comment 0
My CR-10 Control Box does not sit level on my shelf and wobbles every time I hit the button, so I designed a shim to put under one of the feet. It should account for a ~0.75mm distance, and almost perfectly levels my printer control box. I printed it with the opening at the bottom and the point at the top. This allows it to not use any support. Finer layer height, smoother surface, better fit (I used .12mm). Depending on your overhangs, I had a little bit of filament that I needed to take off...
Topics: stl, Control_box, Creality_CR-10, 3D Printer Accessories, thingiverse
8
8.0
Jan 18, 2021
01/21
by
Emmanouil Fylladitakis (Zinoberrot)
data
eye 8
favorite 0
comment 0
Edit : I've uploaded Fusion 360 files of the two boxes (lost the file of the third). Feel free to remix them as you see fit. I am not particularly fond of tight spaces and I particularly hate noise whenever I can avoid it. Things got especially tricky when I wanted to replace the PSU and the board, as I would have to mod the living hell out of the small control box. Since space next to the printer is not a problem for me, I decided to design a new, much larger control box for the Tevo Tornado....
Topics: tevo, Control_box, 3D Printer Accessories, thingiverse, tevo_tornado, stl
4
4.0
Apr 8, 2021
04/21
by
Bowman (bbo)
data
eye 4
favorite 0
comment 0
PID control box houses the PID controller, Fotek Solid State Relay (SSR), round toggle switch and computer power cord plugin in the back. Print the two parts separately to minimize delamination. filament extruder temperature controller
Topics: heater_control_box, temperature_controller, PID_control_box, PID_controller, Relay, stl, PID_box,...
4
4.0
Jan 9, 2021
01/21
by
Levicus Williams (Veak47)
data
eye 4
favorite 0
comment 0
This Ender 3 control box cover was my change to another design I printed. I wanted to be able to add a Pin 27 / EZOut board without making it a tight fit or bending pins and wires. There is a raised area over the location of the Pin 27 / EZOut board location to avoid any interference with the cover. With this part, there is not need to bend pins or cables to aid in or force safe fit. This part also aids in the longevity of your boards, connections, and cables by not placing any additional...
Topics: Noctua_fan, thingiverse, ender_3_fan, stl, ender_3_upgrade, custom, DIY, Ender_3, EZOut, pin,...
11
11
Jan 18, 2021
01/21
by
Brian Ong (BrianTheCookie)
data
eye 11
favorite 0
comment 0
IMPORTANT: READ THE END OF THIS FOR SAFETY INFORMATION. Modification for the original Creality CR-10 control box; replaces the three loud fans inside with either one or two 120mm fans. Print 2 of these stands and fit either one or both with 120mm fans (no screws required). If you only fit one fan, I would recommend you fit the front stand with a fan blowing inwards so the air cools the power supply and goes up the box and cools both the circuit boards. Open the control box, remove the power...
Topics: Control_box, 3D Printer Accessories, fan, thingiverse, Creality_CR-10, stl
5
5.0
Mar 9, 2021
03/21
by
Adam Adams (Ftheriachab)
data
eye 5
favorite 0
comment 0
Control Box for CamTool CNC v3.3 board. I bought a cheap CNC kit on Amazon and while it works great and is extremely compact, I don't like having exposed electronics. This box features a snap-on lid and 15mm grommet holes that are perfect for fitting small corrugated tubing. More pictures to come. Link to CNC: https://www.amazon.com/gp/product/B0778KCLS7/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Topics: stl, thingiverse, CNC_Machine, CAMTool_CNC, Control_box, cnc, Machine Tools
10
10.0
Jan 18, 2021
01/21
by
Aren Bracknall (PredatorVKC)
data
eye 10
favorite 0
comment 0
Made this to make a square tube box to enclose the 3d printer (CR-10s). Infill 30+ ( more to make stronger) Raft not needed Support low depending on how good the printer and support is. resize to needs. for donations:- BTC (Bitcoin) - 1EqnaW2F7aLWxaj2KV2cAALVnK4z7hiSiT ETH (Ethereum) - 0x4636ceee62a31e14862b802d67c88dfbf507e03d LTC (Litecoin) - LQhmo3xbNFLXbc4aaJZSDosxauw4Xz6AQ6 DSH (Dash) - Xfp7jhn3qJTV58h84Toae7c8EbyKzU3f25 BTC (Bitcoin Cash) - 162KPy4AAnXVRuq4sZX8fhwXqP11AFDNjN Paypal -...
Topics: Control_box, 3D Printer Accessories, fans, thingiverse, stand, stl, Cr-10s
7
7.0
Jan 19, 2021
01/21
by
Nathan Rittenhouse (natronics)
data
eye 7
favorite 0
comment 0
A bracket to mount the control on top of the Pxmalion core i3. Uses the existing screws to secure the bracket to the printer then the hexagonal standoffs snap into the rear protrusions. Allows for easy removal for service, etc.
Topics: Control_panel, 3D Printer Parts, 3d_printer, Control_box, thingiverse, stl
4
4.0
Mar 4, 2021
03/21
by
Derrick Aquino (vampyrex13)
data
eye 4
favorite 0
comment 0
I recently upgraded to the SKR v1.1 control board and needed a cover that allowed the wires to come out the side for my direct drive setup. I added an opening to thisiskeithb's original design and removed the z-endstop opening since I use a BLTouch. Also, it was too loud using two 40mm fans so I modified the cover to use a single 24V 60x60x10mm fan instead. Updates ----------- • 2019.03.22: Updated the fan covers with the correct ones (only 4 mounting holes instead of the accidental 6). •...
Topics: stl, bigtreetech_skr, 3D Printer Parts, control_box, Ender_3, thingiverse
4
4.0
Jun 21, 2021
06/21
by
David Harmon (Elstorm)
data
eye 4
favorite 0
comment 0
This control box moves the Control Board out from underneath the Ender 3 or Ender 3 pro. I specifically designed this because any time I wanted to work on the controller I had to either tip the machine or rest it of a table and crawl under. This Model uses original mounting screws for the Creality Control board and can house a MKS genl v1.0 or the SKR 1.3. it proves cooling via a 120mm fan blowing into the box mounted with m3 screws and nuts. The screen mounts with the screws you take out as...
Topics: Ender 3 pro, 3D Printers, thingiverse, stl, ender 3, Control Box
7
7.0
Mar 5, 2021
03/21
by
Juanjo Rodríguez (alienboyxp)
data
eye 7
favorite 0
comment 0
I was searching for a control box to fit my MKS GEN L, TL-Smoothers, MOSFET and Pi Zero. Plus, I wanted to be able to still easily connect a usb cable to both the MKS GEN L. It replaces the cableChain_40MountSide from the cable chain at https://www.thingiverse.com/thing:2920060. You can now connect the cable chain directly to the control box. This is the result. Have printed and fitted it myself. All fits snugly. Some Ender-3's have the connection for the stepper motor cable on the bottom, in...
Topics: 3D Printing, stl, Control_box, MKS_Gen_L, Ender_3, thingiverse
7
7.0
Jan 20, 2021
01/21
by
Bosco Baracus (Bosco_Barracuda)
data
eye 7
favorite 0
comment 0
Français : Support de Boitier de Contrôle pour Creality CR-10(S) et Anet E10. Il peut être équipé d'un ventilo de 120mm (non obligatoire). Avant/Arrière, intervertisable. English : Support of Case of Control for Creality CR-10 ( S ) and Anet E10. He can be equipped with a ventilo of 120mm (not compulsory). Front / back, intervertisable. Timelapse : https://youtu.be/hqBexGnBw6M
Topics: Control_box, 3D Printer Accessories, 120mm, thingiverse, CR10, stl, CR-10
6
6.0
Jan 21, 2021
01/21
by
Lewis Brown (LewisHashbrown)
data
eye 6
favorite 0
comment 0
Extended it so the Anet E12 control box fits. Its not snug, has a few mm movement
Topics: thingiverse, Control box, anet e12, 3D Printing, anet, Ikea Lack, stl
3
3.0
Jan 7, 2021
01/21
by
Damian Bridge (new_two3D)
data
eye 3
favorite 0
comment 0
The original THING was for a ramps 1.4 board and I am using an arduino uno and cnc shield so I modified the faceplate for my board and accessories. I added a hole for an Estop, some buttons and a switch. I plan to make the rest of the box out of wood or plywood.
Topics: 3D Printing, Control_box, stl, MPCNC_Add-On, thingiverse, faceplate, MPCNC
2
2.0
Jan 18, 2022
01/22
by
(MakeItMakeItMakeIt)
data
eye 2
favorite 0
comment 0
If you've printed the Control Box from my Maker Mods thing https://www.thingiverse.com/thing:4086006 you've realized that to replace a component in the Nose section you had to pretty much take all the guts out of everything to take the Nose off. And cursing me as well..... No more. Now the Nose is held on with 2 M3 x 10mm screws and hinges/lifts off for easy access. Additionally, the Arctic F9 fan that was in it was too loud and a bit overkill, so I've changed it out to a Noctua 4010 with a new...
Topics: Maker Mods, thingiverse, Easy Access, Hinged, Control Box, 3D Printing, stl
10
10.0
Jan 18, 2021
01/21
by
ışık (isiks_tech)
data
eye 10
favorite 0
comment 0
*The pictures don't include the door yet, otherwise the they are correct. I still need to do some wiring to finish the control box, but the design works fine.* If you want to see this get developed, and installed, watch my Tevo Black Widow Mods Playlist here: (I will work on this over the next few weeks as well, so subscribe if you want to see them as the videos come out) https://www.youtube.com/playlist?list=PLJKGITN8zPugVZEqNA1bqYd4eg7A3Cfdw This is a control box design that I made for my...
Topics: 3D Printer Parts, tevo_black_widow, Control_box, stl, thingiverse, MeanWell
10
10.0
Apr 5, 2021
04/21
by
Maarten Beniers (MBeniers)
data
eye 10
favorite 0
comment 0
Control box cover for the Rapman 3.2 3D printer. This is an acrylic plate cut out work cutted out with a laser cutter. used thickness is 4 mm. You need glue to to fasten all parts together to one piece. Share thoughts in the comments!
Topics: thingiverse, cover, 3D Printer Accessories, control, control_box_cover, stl, rapman_32_3d_printer,...
7
7.0
Jan 19, 2021
01/21
by
Rikard Andersson (SweFinMek)
data
eye 7
favorite 0
comment 0
Updated! I added the LCD on the right side with an angle for better view BoxCV3LCDr BoxSV3LCDrPart1-2 Here comes another control box for TronXY X1 The box is in two versions, one with a fastener, so that you can screw X1 into the box Available as splitted and complete. Splitted version is for anyone who wants to print the box on its X1 See pictures..
Topics: TRONXY, Control_box, 3D Printer Accessories, thingiverse, TronXY_X1, box, stl
5
5.0
Mar 5, 2021
03/21
by
Andrew Thomas (DrAndrewThomas)
data
eye 5
favorite 0
comment 0
I decided to design a control box to mount the main power switch for my CNC together with a small automotive voltage and current meter. I also wanted to add an automotive 24V to 12V regulator inside it so I can use one power source to do that and supply my 5W LASER module, a PC fan and some lights, as well as switching the power to my spindle motor. So I included switch cutouts for those too. The design here is what I came up with. The main box body is printed on its side to reduce support...
Topics: control box, stl, voltage meter, Machine Tools, current meter, switches, CNC, thingiverse
10
10.0
Jan 14, 2021
01/21
by
Matt DeGraw (Zaytas)
data
eye 10
favorite 0
comment 0
My control box would tip over occasionally when the filament would be wedged between the edge of the spool and the next layer. I have a standard Ikea office table. You should be able to scale it up or down if you table has similar dimensions.
Topics: Creality, thingiverse, Creality_CR-10, Control_box, stl, 3D Printer Accessories, clamp
4
4.0
May 1, 2021
05/21
by
Hong Seung il (cynahsy)
data
eye 4
favorite 0
comment 0
PLA nozzle 0.4mm resolution 0.2mm infill 20% control box video 09:25 ~
Topics: stl, controller, Radio_Control, control box, Remote_control, thingiverse, R/C Vehicles
11
11
Jan 18, 2021
01/21
by
Peter Solomon (psdesign)
data
eye 11
favorite 0
comment 0
here is a mount for a 40 x 40 x 10 Fan for the Ender 2 Control Box. I didn't like the mount provided by Creality, this is more stable and doesnt vibrate. I prefer Noctua for the silence and quality. http://a.co/iQrL63Z If you make please upload your photos! Comments always welcome.
Topics: creality_ender_2, Control_box, 3D Printer Accessories, Fan_mount, thingiverse, stl
11
11
Jan 18, 2021
01/21
by
pablo haubet six (pablo91)
data
eye 11
favorite 0
comment 0
Designed this originally for my FLSUN i3 as I only had the 3.2" mks touch screen and got annoyed that I could not change details settings such as extruder steps or Z offset without connecting a PC. After some research, i found out the Maker base L1.0 board and most other boards that I know of support both screens running simultaneously. I designed this control box so both screens can be used. I like using the touchscreen for its ease of use and wifi capability and the LCD for fine-tuning...
Topics: LCD12864, MKS_TFT32, Control_box, 3D Printer Accessories, thingiverse, flsun_i3, stl
4
4.0
Mar 22, 2021
03/21
by
Patrick Hebauf (dabauf)
data
eye 4
favorite 0
comment 0
This is a simple gusseted wall mount for the control box that comes with most Creality printers. It is sized to fit the box somewhat snugly, although I used double sided tape to hold the box in place. You will need 2 of these, mounted at whatever distance apart you feel appropriate. The box is fairly light, so these should be more than robust enough. I can always modify the file and re-upload if anyone wants thicker gussets. They're currently .25" x .25" or 6.35x6.35mm. If the holes...
Topics: stl, 3D Printer Accessories, Control box mount, Creality, Creality CR10, thingiverse, CR10
3
3.0
Mar 18, 2021
03/21
by
JUAN DELGADO (Jake_meister)
data
eye 3
favorite 0
comment 0
Created new Standoffs for the Stock Board. Added a Smoother Holder for 4 TL_Smoothers Using: https://www.thingiverse.com/thing:3351822 Added Stock Display to Front Top Panel Using: https://www.thingiverse.com/thing:3498745 Adjusted Front Bottom Panel for new Parts. Added A new Back Panel to tidy-up cables with GX-16 Aviation Connectors https://smile.amazon.com/gp/product/B07L1Q69R5/ref=ox_sc_act_title_8?smid=A18HI9P9LIZCZS&psc=1
Topics: Control_box, Ender_3, thingiverse, Ender_3_Pro, 3D Printer Parts, stl
11
11
Apr 17, 2021
04/21
by
Cri Ba (CriBa)
data
eye 11
favorite 0
comment 0
Remix of spaxi's CR-10 Fan Mod with feet. Because I needed just the feet (for better PSU airflow) I changed the STL to fit my needs. How is it mounted? 1. Remove the base plate. 2. Unscrew the rubber feet 3. Put the base plate together with a pair of the feet (front and back) on. 4. Screw them gently (eventually you will need washers in order to not crack the plastics). 5. Take the rubber feet and put them in the provided space. 6. Have fun!
Topics: Foot, Stand, thingiverse, stl, Feet, CR-10, Control Box, 3D Printer Accessories
