3
3.0
Mar 5, 2021
03/21
by
Taylor Kraus (tekraus87)
data
eye 3
favorite 0
comment 0
I printed these for my kids' bedrooms which included sizes 2-1/2"(63.5mm), 3"(76.2mm), & 3-13/16"(~97mm)(Center to center(Assuming everyone knows how to measure drawer pulls)). I also created a drawer knob based on the same design. All pull holes are 3.8mm(perfect fit for typical drawer pull screws). All pull heights are 7/8"(22.2mm). This design was a ton of fun and they spruced up my kids' rooms nicely. Hope you enjoy.
Topics: drawer_pull, stl, drawer_knob, drawer_handle, drawer, Decor, thingiverse
4
4.0
Jan 9, 2021
01/21
by
Maker's End Info (makersendinfo)
data
eye 4
favorite 0
comment 0
Blog article regarding design, the pros and cons of these particular drawers, and direct links to the drawer units: [Print drawer inserts for the IRIS USA storage drawer units](https://blog.makersend.com/2021/01/print-storage-drawer-inserts/) We purchased a bunch of stackable drawer units from Amazon after making some price/performance tradeoff decisions. These drawers are significantly cheaper than some alternatives, with a few design snafus that made the drawer inserts more annoying than was...
Topics: Drawer_Dividers, thingiverse, stl, drawer_organizer, drawer_insert, drawer_organization,...
3
3.0
Mar 15, 2021
03/21
by
John Mulac (3DPRINTINGWORLD)
data
eye 3
favorite 0
comment 0
Under Desk Pencil Drawer This is a pencil drawer I designed for under my sons desk to hold his things. There are some micro and SD slots along with a area to hold erasers. There is a natural handle built into the understand of the drawer for opening. I printed it on the Muldex with Atomic PETG and its virtually indestructible! You will need need 235mm x 300mm of build volume.
Topics: drawer, under desk drawer, thingiverse, desk drawer, pencil drawer, stl, Office
6
6.0
Jan 17, 2021
01/21
by
Geoff Cohen (geoff_cohen)
data
eye 6
favorite 0
comment 0
Moved house and lost some of the drawers & dividers for my Electronic parts. If your drawers also go missing, now you can just print some more, with the added option of 1/2/3 divider(s). I made a few different wall thicknesses, so they should print on most 3D printers Alternatively, if those pesky drawers turn up without dividers, just print a few dividers, it's a lot quicker than a whole drawer too
Topics: drawer divider, Electronics, thingiverse, parts drawer, electronics drawer, drawer, stl
2
2.0
Mar 16, 2021
03/21
by
Pertti Tolonen (petolone)
data
eye 2
favorite 0
comment 0
IMPORTANT: Please give your suggestions on what kind of customized compartments you would like to see in this drawer box set. I may well add those this set. This WIP project is my sting at organizing misc stuff in a drawer. Status: - V1 set: Started and WIP using Fusion360 * coin box 100x80mm (printed already and found working) * credit card box with a divider 100mmx60mm (1st version printed & working) * box 100mmx184mm * box 100mmx184mm with divider - V2: Likely to be re-created as a...
Topics: Drawer_Dividers, drawer, thingiverse, drawer_organizer, drawer_organization, stl, Organization
4
4.0
Mar 3, 2021
03/21
by
Matthew Blome (mblome)
data
eye 4
favorite 0
comment 0
I couldn't find this exact style of replacement part online, so I designed one from the original, printed it out, and works great.
Topics: drawer_bracket, drawer_rail_support, Replacement Parts, Drawer_Slide, thingiverse, Drawer_socket,...
6
6.0
Apr 18, 2021
04/21
by
Steven Fayers (stevenfayers)
data
eye 6
favorite 0
comment 0
Drawer organiser system that can be adjusted and extended as needed. Rails ===== These can be stretched to the required length in your slicer. I printed these on-end, in vase (or spiralizer) mode with a 0.4mm nozzle. The rails have a 3mm groove running through one face. This is to enable a printed tray to be placed underneath with the lip of the tray sitting in the grooves. Trays ===== At the moment one example tray is included in this 'thing'. The example is 100x200 meaning a box with internal...
Topics: Drawer_Dividers, drawer_organizer, thingiverse, stl, drawer_organiser, drawer, Kitchen & Dining
2
2.0
Apr 19, 2021
04/21
by
Jason Tira (Xs4eyes)
data
eye 2
favorite 0
comment 0
Slide for drawer I printed these with heavy infill due to the originals breaking
Topics: Household, thingiverse, drawer_slides, stl, Drawer_Slide, drawer
2
2.0
Jan 19, 2022
01/22
by
Sandy Wrestler (Boomerjo)
data
eye 2
favorite 0
comment 0
Drawer Organizer for 153 mm (~6 inch) wide Drawer. Print is 110mm tall.
Topics: drawer, Organization, thingiverse, drawer_organizer, Drawer_Dividers, stl
5
5.0
Mar 22, 2021
03/21
by
Klaus Heiland (Klaus_750)
data
eye 5
favorite 0
comment 0
This is my fist Thing created in FreeCAD, it is a very simple drawer pull
Topics: stl, Household, drawer pull, drawer knob, drawer, thingiverse
9
9.0
Jan 9, 2021
01/21
by
Teresa Brady (Grafixgirl)
data
eye 9
favorite 0
comment 0
I made this to be able to replace some missing drawer knobs in the kitchen of the small unit my Mum is renting. I made this Thing with Tinkercad. Edit it online https://www.tinkercad.com/things/0FgbicH4NVx
Topics: thingiverse, stl, drawer_handle, Kitchen & Dining, drawer_pull, drawer_knob
2
2.0
Jan 19, 2022
01/22
by
Sandy Wrestler (Boomerjo)
data
eye 2
favorite 0
comment 0
Drawer Organizer for 153 mm (~6 inch) wide Drawer. Print is 110mm tall.
Topics: drawer, Organization, thingiverse, drawer_organizer, Drawer_Dividers, stl
7
7.0
Jul 21, 2020
07/20
by
Center for Accessible Technology in Sign
movies
eye 7
favorite 0
comment 0
ASL vocabulary
Topic: drawer
1
1.0
Apr 20, 2022
04/22
by
Justin Masse (Webtron18)
data
eye 1
favorite 0
comment 0
I really like GoToTheWall's original, but I wanted it to fit flush with the desk so I removed the handle and added a small hole in the front. Original: https://www.thingiverse.com/thing:4667782
Topics: thingiverse, drawer, Underdesk_drawer, desk, Organization, stl, desk_drawer
2
2.0
Mar 25, 2021
03/21
by
Joshua Page (nickodemous)
data
eye 2
favorite 0
comment 0
Drawer separator for old metal drawers. The existing separators I had measured 134mm x 45mm. These are pretty simple with ridges down the edges to hold them in the slots
Topics: stl, thingiverse, drawer_divider, Drawer_Dividers, Containers, drawer, separator
6
6.0
Jan 17, 2021
01/21
by
Garrett Dickson (garrettreed)
data
eye 6
favorite 0
comment 0
This is a simple desk drawer designed for plank style desktop. The drawer is made of four printed sections that are glued together. Each drawer section is a 160mm square and is 50mm tall. Print one front left, one front right, and two back sections. Print four of the slide supports. Works best with a 12in drawer slide like [this one](https://www.amazon.com/gp/product/B0000DD4A6/ref=oh_aui_detailpage_o05_s00).
Topics: thingiverse, Office, Drawer_Slide, drawer, stl, desk_drawer
9
9.0
Jan 18, 2021
01/21
by
Brian Watt (bwatt)
data
eye 9
favorite 0
comment 0
The Drawer Divider Construction Set helps you organize your world. Whether for kitchen, office, or workshop you can create a custom divider for any drawer you have. You assemble standardized components into any size you want from a single section paper-clip holder to a multi-section full-drawer divider. Measure your space, design your divider, print your components, assemble your divider, and get organized today. The components are based upon an 86mm length and width, a 51mm height, and a 3 mm...
Topics: thingiverse, divider, Containers, Drawer_Dividers, drawer, drawer_divider, dividers, stl, drawers
6
6.0
Jan 19, 2021
01/21
by
Daniel Patterson (The_Great_Dano)
data
eye 6
favorite 0
comment 0
Kitchen drawer support. As you can see from the pics the installer was not lacking in ingenuity. I've also included a test piece for fitting.
Topics: Drawer Support, thingiverse, Household, drawer_bracket, drawer, stl, drawers
7
7.0
Jan 18, 2021
01/21
by
Geoff Cohen (geoff_cohen)
data
eye 7
favorite 0
comment 0
Similar to my earlier parts drawers, same length but higher and wider 144mm X 98mm X 44mm vs. 144mm X 72mm X 33mm for the smaller drawers
Topics: Electronics, thingiverse, parts drawer, electronics drawer, drawer, stl, drawers
3
3.0
Apr 24, 2021
04/21
by
Claude Theroux (ctheroux)
data
eye 3
favorite 0
comment 0
These are small drawer dividers. There are 2 models. One for the drawer cabinet sold by Canadian Tire. The other one is for drawer cabinet sold by Home Depot. They can be printed without support. This object main web page is: http://www.ctheroux.com/drawer-dividers-for-small-parts-cabinet/. You can request the source files on the page listed above.
Topics: Drawer Dividers, Component Drawer, Component Cabinet, Drawer Separators, stl, Tool Holders &...
2
2.0
Jun 10, 2021
06/21
by
luis gancedo romero (lugaro72)
data
eye 2
favorite 0
comment 0
Small drawer for hanging on kitchen door, various hooks and drawer options.
Topics: drawer kitchen, Kitchen & Dining, kitchen, thingiverse, drawer, hanging_drawer, hanging drawer...
3
3.0
Apr 8, 2021
04/21
by
(innomind)
data
eye 3
favorite 0
comment 0
Collection of knobs of many different head designs.
Topics: drawer_handle, Replacement Parts, drawer_knob, stl, knobs, drawer_pull, thingiverse, drawer, knob
2
2.0
Jun 10, 2021
06/21
by
Michael Masek (michaelmasek14)
data
eye 2
favorite 0
comment 0
Design credit goes to my dad. CAD files included for custom fit.
Topics: Drawer_Dividers, Bathroom, stl, thingiverse, drawer, divider
1
1.0
Oct 29, 2021
10/21
by
Bert Aarssen (B3rT1979)
data
eye 1
favorite 0
comment 0
This make is based on the basic drawer lock by tontze. I added three edges for better grip.
Topics: thingiverse, Household, drawer, stl, drawer_lock, Lock
6
6.0
Jan 19, 2021
01/21
by
Jan Bassett (jmcbassett)
data
eye 6
favorite 0
comment 0
I created this to make some custom sub-dividers for my small parts drawers; I didn't have enough compartments in the drawers for some of the smaller parts. The drawers I use these in are radiused on both bottom corners of the centre compartment and both sides and front/back corners of the end compartments. This design therefore has a specifiable radii that is used for all 4 sides of the base and the vertical corners. The wall thickness is subtracted from the radius to give the internal radius;...
Topics: thingiverse, divider, small_parts_drawer, Parts_Drawer_Divider, Hobby, Drawer_Dividers, stl,...
2
2.0
May 21, 2021
05/21
by
The Swedish Maker (theswedishmaker)
data
eye 2
favorite 0
comment 0
It was made as a hidden drawer for the coffee table I made in this video: https://youtu.be/QfOrXf1-Qf8
Topics: drawer, hidden_drawer, thingiverse, Household, stl
6
6.0
Jan 17, 2021
01/21
by
Geoff Cohen (geoff_cohen)
data
eye 6
favorite 0
comment 0
nearly identical to my first version at https://www.thingiverse.com/thing:2716317 but the handle is much easier to print - also standardised on 1.2mm thickness - after printing & testing several, it's best IMHO, the 0.8mm are just to flimsy After moving house I lost some of the drawers & dividers for my Electronic parts - here's my solution If your drawers have also gone missing, just print some more, with the added option of 1/2/3 divider(s).
Topics: divider, Electronics, thingiverse, parts drawer, drawer, electronics drawer, stl
2
2.0
Mar 19, 2021
03/21
by
Carl Arney (Cargy)
data
eye 2
favorite 0
comment 0
This design can be used without adding a badge, but it will result in a recessed drawer front. Alternatively, you can use the space for a badge design of your own. After resizing Reactron's HAL9000 badge (Thing 579607) to tart up the front of my ancient PC case, I was in full smug mode. But something was niggling me: There was wasted space behind the blanking plate that could be put to better use in my space-limited environment. In this age of rendundant disc drive bays, I figured that I...
Topics: Drawer Unit, HAL9000, Storage, Drawer, thingiverse, PC Drawer, Computer, stl
2
2.0
Jan 4, 2021
01/21
by
David Mikulik (dmikulik)
data
eye 2
favorite 0
comment 0
Replacement for broken drawer slides
Topics: drawer, stl, Drawer_Slide, drawer_slides, ikea, thingiverse, Replacement Parts
2
2.0
Jul 3, 2021
07/21
by
austin rogers (arog1533)
data
eye 2
favorite 0
comment 0
simple 3 in drawer pull with #8-32 size holes
Topics: drawer, Other, drawer_handle, thingiverse, stl
15
15
Apr 16, 2021
04/21
by
(rice9300)
data
eye 15
favorite 0
comment 0
Telescoping drawer slides. 300mm closed, 690mm open. Includes regular and light duty versions. Print 1 part each of a,b,c and 4 part d and assemble per picture. A little glue will help keep it permanent. Larger parts include built in skirt to keep it from lifting off print bed. Remove before assembly.
Topics: Organization, Drawer_Slide, Drawer, thingiverse, stl
2
2.0
May 1, 2021
05/21
by
Igor Che (igrche)
data
eye 2
favorite 0
comment 0
Remixed for my sizes + added dividers Added F360 file if somebody wants to remix
Topics: stl, Containers, Drawer_Dividers, thingiverse, drawer
5
5.0
Jan 3, 2021
01/21
by
Ronny H. (RonX666)
data
eye 5
favorite 0
comment 0
drawer handle with anchor (Robuster Schubladengriff mit Anker).
Topics: drawer_handle, drawer, stl, Household, thingiverse
1
1.0
Sep 13, 2021
09/21
by
Andrea Baccega (vekexasia)
data
eye 1
favorite 0
comment 0
[](https://youtu.be/5dW284-pWDU) My Drawer was a total mess! Decided to design a modular drawer system to accomodate my stuff that has different size. I already exported most boxes with and without label notch. Some of them has been exported with double height as well. Along with the stl file i also let you customize the fusion project as the project was designed with functional parameters so that you can make some adjustments to match your drawer size. In my case I decided to not create a...
Topics: stl, Drawer_Dividers, thingiverse, drawer, Organization
2
2.0
Apr 5, 2021
04/21
by
Abel Reyes (sajunt4)
data
eye 2
favorite 0
comment 0
Small and simple pieces to organize your Drawers. Modular, adjustable to whatever you need. It requires the use of Plywood or Acrylic of about 1.5~2mm thick to build the walls (you can always 3D print it too, but it would be a quite slow task) You can see full instructions of how to build this by your own in: [Instructables](https://www.instructables.com/id/3D-Print-Drawer-Organizer/) Each part requires less than 2g of material and 6-14 minutes, depending on the part and settings. **And as...
Topics: thingiverse, Organization, Organizer, Desk_organizer, stl, Drawer_Dividers, drawer_divider, Drawer
6
6.0
Jan 17, 2021
01/21
by
Corey Ward (coreyward)
data
eye 6
favorite 0
comment 0
Simple drawer pull / handle with a generous 1" of room for your hand. Holes are ~1mm in diameter, allowing for screw alignment without pre-drilling. Hole spacing is 5" on center.
Topics: drawer_handle, pull, thingiverse, Parts, drawer, drawer_pull, stl, cabinet_handle
6
6.0
Jan 20, 2021
01/21
by
Joshua McCorkle (Nicabus)
data
eye 6
favorite 0
comment 0
This is a replacement drawer guide modeled from the Prime-Line Purple Drawer Guide. It is intended to be used with drawers to help keep them aligned.
Topics: thingiverse, Prime-Line, drawer_guide, Replacement Parts, drawer_slides, drawer, stl
2
2.0
Apr 8, 2021
04/21
by
Ja In (chimeranzl)
data
eye 2
favorite 0
comment 0
IKEA MALM bedside drawer caddys / organizers. Slightly different design for the left and right, and angled on one side of each to mate them up in your drawer. A very simple but effective way to keep your bedside drawers tidy ;-) Each is made to fit in 1/4 area of the Ikea 'MALM' bedside drawers, so feel free to print 1, 2, 3 or 4 of them per bedside drawer. Personally I just printed a left and right to sit at the front of the drawer, however you could orient them anyway around you like. Made...
Topics: drawer organizer, drawer dividers, Containers, stl, thingiverse, drawer caddy, ikea malm
3
3.0
Apr 12, 2021
04/21
by
Karen Walters (Karen5R)
data
eye 3
favorite 0
comment 0
These are dove-tailed drawer dividers that are somewhat customizable because the walls can be placed in a joint at either 90 or 180 degrees. The walls included are a 4 inch long wall and an 8 inch long wall (both are 3.25 inches tall). If you have a program to modify the .stl files, you can make the walls any length/width you want.
Topics: thingiverse, dividers, divider, drawer, stl, drawers, drawer_divider, Drawer_Dividers, Organization
9
9.0
Mar 12, 2021
03/21
by
An De (KFix)
data
eye 9
favorite 0
comment 0
Thanks to loidolt for its inspirational design of Twisted Cabinet Knob ! I just wanted to make my own, smaller, larger and slightly smoother. Will look great on my recycled bed table.
Topics: thingiverse, knob, drawer_handle, cabinet, Household, drawer_knob, stl, door, drawer
8
8.0
Apr 2, 2021
04/21
by
(19200baud)
data
eye 8
favorite 0
comment 0
This was designed to replace a broken plastic drawer guide.
Topics: Replacement Parts, guide, thingiverse, Drawer_Slide, drawer_guide, slide, stl, drawer
2
2.0
Apr 8, 2021
04/21
by
Domenic Acosta (BostonBowser)
data
eye 2
favorite 0
comment 0
Drawer divider for Akro Mils small drawers.
Topics: Organization, Drawer_Dividers, stl, thingiverse, Akro-Mils, drawer
6
6.0
Jan 17, 2021
01/21
by
Don Minca (donminca)
data
eye 6
favorite 0
comment 0
I was willing to throw away this cd door because now it had become just a draw to dust to be able to put in its place of drawers to be printed. when suddenly a flash of genius! and here it is, using the hard case of the CDs as the basis of the drawers, I only printed the dividers and through the use of glue I glued the whole thing. I've also uploaded the original file if you need to modify it
Topics: box_with_drawers, thingiverse, Containers, Drawer_Dividers, drawer, drawer_divider, stl, drawers
2
2.0
Apr 4, 2021
04/21
by
Michael Pagel (Floppy_MV)
data
eye 2
favorite 0
comment 0
First of all, thank you to @MarcElbichon for the nice design. As you wrote: "If someone have time to export to individual stl, don't hesitate ! ;)" Separated with Autodesk Meshmixer, here you can find the objects in single files for the 1U drawer. Naming of the files is depth_x_width.stl, but see the attached image. 1x.zip = first row 2x.zip = second row ... ALL_1x1-12x12.zip = all in one file
Topics: thingiverse, stl, Containers, Ultimate_Drawer, drawer, organizer
2
2.0
Jan 19, 2022
01/22
by
Matt Wilson (wilsonmd4)
data
eye 2
favorite 0
comment 0
A simple drawer stop. I made this as a replacement for one that broke and could not find a similar style anywhere. The nightstand this was designed for had a shallow lip that the notch in the stop sat on. You can easily attach this flush if your drawer case top is flat; just remove the notch in the model. I printed the model on its side so that the print lines ran the length of the stopper. This made it flexible but also quite strong. My PLA version has held up well for several months and no...
Topics: drawer, thingiverse, drawer_stop, Replacement Parts, stl
8
8.0
Mar 9, 2021
03/21
by
Thor Johnson (ThorMJ)
data
eye 8
favorite 0
comment 0
So, the home improvement store sells guides... but they don't sell the moulding that goes with it. This one slides closed to fit a 1 1/2" x 1/4" strip (which they do sell), and if you have an issue with it coming open, there is a 2mm hole so you can drop a locking pin (or bit of filament) in. Eh... I added a latch so it will just snap shut. Pop it back open with a screwdriver.
Topics: stl, thingiverse, drawer_slides, drawer, Replacement Parts
5
5.0
Jan 19, 2021
01/21
by
Ronald Chinn (RCC1)
data
eye 5
favorite 0
comment 0
A friend of mine broke the plastic slide that is on the back of the drawer. This is the part which keeps the drawer from tipping down on the front when the drawer is pull out. I looked through thingiverse, and did find quite a few, but none exactly like the one he had (there were plenty that were close)
Topics: thingiverse, Replacement Parts, Drawer_Slide, drawer, stl
1
1.0
Nov 30, 2021
11/21
by
(jakrabit)
data
eye 1
favorite 0
comment 0
One of the drawers in our house (40 years old) would just fall down. the track backplate was shattered... designed, printed, installed... works great.
Topics: thingiverse, drawer, drawer_track, stl, Household, kitchen
3
3.0
Apr 16, 2021
04/21
by
Dejan Cvetanovic (cdejan)
data
eye 3
favorite 0
comment 0
Fusion 360. Holes are 4mm
Topics: Organization, thingiverse, stl, drawer_handle, drawer_knob
1
1.0
Nov 30, 2021
11/21
by
Jonathon Taylor (JonathonT)
data
eye 1
favorite 0
comment 0
Here is a simple solution for drawer organization. Using 1/4" board and a 3D printer you can quickly and simply arrange your drawers with dividers to keep them organized! Full instructions on Instructables: https://www.instructables.com/Simple-Drawer-Dividers-With-3D-Printed-Connectors/ Or for Sale on Etsy: https://www.etsy.com/shop/TaylorMadeCustom3D
Topics: Organization, Dividers, thingiverse, Drawer_Dividers, Drawer, stl
