5
5.0
Mar 5, 2021
03/21
by
Evgeniy Lapin (Shaman_2010)
data
eye 5
favorite 0
comment 0
My version of the frame for the eachine E013 drone. Original frame weight is 3.89g, my (without battery frame) version is 4.00g. The idea of fixing gum is honestly borrowed from this model - https://www.thingiverse.com/thing:2753175 (good idea!). Two versions: with a frame for the battery and without it. Optional - motor shields. ------------------------------- Parts of the frame for the battery are printed and glued with Abs plastic, which must first be dissolved in acetone....
Topics: stl, R/C Vehicles, Eachine, eachine_e013_whoop, E013, eachine_e013, drone, thingiverse
3
3.0
Jun 22, 2021
06/21
by
jasper stomps (jappie46)
data
eye 3
favorite 0
comment 0
print on 35 % infill 0,2mm layer hight 100mm/s skirt will do the trick just fine support put at touching build plate and 90 degrees because only the pillar needs support.
Topics: stl, thingiverse, eachine_e013, Eachine_E010, Hobby, eachine_e013_whoop, eachine
6
6.0
Jan 21, 2021
01/21
by
mich kor (ugsugs)
data
eye 6
favorite 0
comment 0
I remade the Nico_FPV's frame design. My Eachine E013 model had connectors, which makes life much easier, but might be heavier. I had to re-solder and push the battery connector to stick out from the top. This allows connecting it the other way around so be careful if you decide to do this mod. This thing (PCB and camera) is quite resistant - I drowned it once already. I hit maaany trees and the ground countless times and it still lives. One motor connector fell off, so I had to solder it again...
Topics: quad, thingiverse, fpv_racing, eachine_e013, Quadcopter, R/C Vehicles, E013, stl
9
9.0
Jan 16, 2021
01/21
by
(Tig3rch3n)
data
eye 9
favorite 0
comment 0
Like all the other Stick Extensions, I rebuilded this one for the E013 Remote :) Printed on my i3 MK2 they fit a bit tight and need be heated up and pressed onto the Metal tip and the small plastic nob located on the Remote. If you need any changes, just ask
Topics: R/C Vehicles, E013, stl, thingiverse
7
7.0
Apr 20, 2021
04/21
by
Th Goltz (ThGoltz)
data
eye 7
favorite 0
comment 0
Parts: Eachine_E010_Frame_v1.stl Eachine_E013_Frame_v1.stl
Topics: Drone_Frame_E010_E013, thingiverse, Toys & Games, drone, stl, Frame, fpv, Eachine, fun, e010,...
12
12
Jan 18, 2021
01/21
by
Joseph Casha (3dMakernoob)
data
eye 12
favorite 0
comment 0
a little remix to fit the screws better and also tidy up the last layers of the rotator shields https://youtu.be/3E45V77O-zk
Topics: thingiverse, Eachine, eachine_e013, drone, R/C Vehicles, stl
9
9.0
Jan 17, 2021
01/21
by
Junior Maker (junior_maker)
data
eye 9
favorite 0
comment 0
This is a model of the hood for the Eachine E013 or like frames with a camera. I have added the 3rd hole on the front right of the hood for the receiver antenna to come through. This hole allows for a range boost on the drone. Final weight is around 2 grams with PLA. This is heavier than the stock cover but is stronger. The drone has no problems flying with it. I see no battery life changes between the covers. I have included the Fusion 360 file for the hood too for modification. You can make...
Topics: fpv, protective cover, e013, tiny whoop canopy, thingiverse, canopy, eachine, tiny whoop, hood,...
8
8.0
Jan 20, 2021
01/21
by
Miguel Ángel Torrubia Moya (matm89)
data
eye 8
favorite 0
comment 0
I just made a 10X battery holder for my E013 Drone. It can be better? yes... but it is my first one so don´t be so hard on me :) It is no so stable? yes i know but it is only first version and when it is broke then i made the next one feel free to make a better remix ;) Pues eso un portabaterias para el dron E013 con capacidad para 10 se puede mejorar y mucho pero por ahora hasta que no se rompa se va ha quedar así sois libres de modificarlo al gusto
Topics: Portabaterias, battery_holder, thingiverse, Akku_Halter, Eachine, drone, R/C Vehicles, E013, stl
10
10.0
Jan 18, 2021
01/21
by
Sawyer Mielke (Sawdog)
data
eye 10
favorite 0
comment 0
Antenna protectors for the E013 and FPV modified E010. Elegant design that protects the most vulnerable part of the entire drone; the antennas. Adds almost no weight to the drone and goes into the pre-existing screw holes.
Topics: fpv, quad, antenna, thingiverse, Eachine_E010_Whoop, Eachine, eachine_e013, e010, Quadcopter,...
9
9.0
Jan 17, 2021
01/21
by
Joel Vande Hey (jvhaerial)
data
eye 9
favorite 0
comment 0
Case for Eachine Tiny Whoop drones with storage for remote, 5 extra batteries and spare parts. Latching lid stays in place for transport
Topics: thingiverse, Eachine_E010_Whoop, Eachine, Eachine_E010, R/C Vehicles, eachine e013, stl
9
9.0
Jan 19, 2021
01/21
by
Raul Gonzalez (Ragoboo)
data
eye 9
favorite 0
comment 0
Just an alternative frame for the Eachine E013 components, in my case i broke the original frame so i came up with this to avoid waiting to a new frame from china. Printed in PLA Bed Temp: 60ºC Extruder Temp: 200ºC Designed for 6mm brushed motors
Topics: miniquad_frame, 6mm, brushed_motor, brushed_quad, thingiverse, Eachine, eachine_e013, miniquad,...
6
6.0
Apr 20, 2021
04/21
by
nico hartmeier (nicohardy)
data
eye 6
favorite 0
comment 0
This is a remix of this case : https://www.thingiverse.com/thing:2512703 I only added tabs on the sides to fit some 5mm x 10mm magnets to hold the case shut in my backpack. It also fits the 3d printed frame from ugsugs! It should print fine without supports.
Topics: thingiverse, stl, R/C Vehicles, fpv_racer, E10, tiny_whoop_case, tiny_whoop, Quadcopter, fpv,...
8
8.0
Apr 17, 2021
04/21
by
morgan piercey (makermorgan)
data
eye 8
favorite 0
comment 0
Created using blender, in order to be used as a wall mounted display for: inductrix, tiny whoop, e010, e013, and f36. material: blue hatchbox ppla layer height: 0.2 speed 80mm/s temperature 210c
Topics: thingiverse, Eachine, tinywhoop, display, Furibee F36, stand, e011, Blade_Inductrix, stl, jjrc,...
9
9.0
Apr 17, 2021
04/21
by
Jindrich Solar (Gophy)
data
eye 9
favorite 0
comment 0
- V2.1 : More durable, less flexible ! - V2 : Lighter and smaller ! - Somebody should help me to make top plate and add it to remixes :) - Alien copy frame for 6x15mm motors - screw holes for Furibee F36 main board (Should also fits E010, E011, H36, H67, Inductrix )
Topics: thingiverse, clone, frame, indcutrix, f36, nano, motors, e011, super, blade, e012, tiny, best, stl,...
10
10.0
Jan 18, 2021
01/21
by
Jindrich Solar (Gophy)
data
eye 10
favorite 0
comment 0
- V2 - More durable (+0.1g) - Weight 0.4g ! - PETG - Low rider Tiny whoop camera mount - 10° Tilt - Version with cut for camera wires (if they are on top) - Designed for E011 (could fit also on E010, H36, F36, E013, Iductrix) - Mount thru last hole to front screw as on picture
Topics: e013, camera, light, low, hanger, stl, easy, e011, aio, simple, fount, thingiverse, tx02s, e010,...
6
6.0
Mar 3, 2021
03/21
by
Jindrich Solar (Gophy)
data
eye 6
favorite 0
comment 0
- 30% Lighter - Better fit - Fits most of Eachine E010 and E011 style quadcopters - check tags - For Tiny Whoop / Newbee drone / GNB whoop batteries - 3.7V / 4.35V - Only thing you need to do is cut end of the battery holder to fit it trough
Topics: holder, upgrade, 1S_LIPO, long, e011, insert, micro, thingiverse, dron, eachine, tiny, case, fit,...
