0
0.0
Mar 9, 2022
03/22
Mar 9, 2022
by
Justin Gutzman (jgutz20)
data
eye 0
favorite 0
comment 0
So i started printing this a while back. I've essentially not soldered prior much to this so i held on to the parts until i had a chance to practice with other things. So i finally got around to figuring this out, slowly i attached one strip at a time, testing along the way until i got all the strips wired up properly. Now came connecting an ESP-8266/NodeMCU, the base of this lamp is very minimalistic so at first, i simply ran the wire out of the base of the lamp into a separate case to house...
Topics: ESP-8266, thingiverse, LED_light, NodeMCU_ESP8266, lamp, Twisted, Electronics, light, WS2812,...
0
0.0
Mar 8, 2022
03/22
Mar 8, 2022
by
Muh Sabri Rahman (jimmylpx)
data
eye 0
favorite 0
comment 0
What you need: WS2812b 38 led 5.5 x 2.1mm DC Power Supply Female Jack Socket Nodemcu amica WS2812b cable like 15 cm soldering iron glue gun
Topics: WLED, thingiverse, Electronics, ESP8266, WS2812b, stl
0
0.0
Mar 8, 2022
03/22
Mar 8, 2022
by
Giorgi Giorgadze (psyfreak)
data
eye 0
favorite 0
comment 0
Wifi Led Lamp can be controlled from local network web browser or android device. It uses ESP8266 board and individually controlled leds, 77 in total (i've used ws2812b 144 per meter version) https://photos.app.goo.gl/5H1aMbvL31J4rDKf7 https://install.wled.me/ install WLED on you esp8266 board Required Parts: 1. ESP8266 wifi module 2. LED Strip WS2812B (144/per meter) 3. Small breadboard (400 pin) will fit perfectly 4. Jumper Wires 22AWG Female-Male 5. Jumper Wires 22AWG Male-Male 6. 5v power
Topics: LED_light, thingiverse, WLED, led_strip, ESP8266, WS2812b, smarthome, stl, Decor
0
0.0
Mar 7, 2022
03/22
Mar 7, 2022
by
Peter Knoesel (Hawkeye0815)
data
eye 0
favorite 0
comment 0
Thanks for this great idea to renevandeneertwegh! Changed backside of dino-1 and dino-2 to install powerswitch and microusb port for powersupply.
Topics: thingiverse, night_light, NodeMCU_ESP8266, dinosaur, 3D Printing, light, LED, stl
0
0.0
Mar 7, 2022
03/22
Mar 7, 2022
by
Celil Türkmen (Celil27)
data
eye 0
favorite 0
comment 0
Here you can find a cheaf NFC holder for youre Tags. Just print it and glue youre slef sticking Tag on it and youre ready to go NFC Tags: https://www.amazon.de/gp/product/B06XH2R5ZP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Topics: ESPRFID, Parts, thingiverse, NFC, ESP8266, Wiegand, NFC_tag, stl, NFC_Tags
0
0.0
Mar 4, 2022
03/22
Mar 4, 2022
by
David Stabinsky (Binsky734)
data
eye 0
favorite 0
comment 0
This is a housing for a smart thermometer as part of a smart thermostat project. I created one for each room of my house that has an HVAC vent, and imprinted the room name on the bottom to keep track of them. I also included a blank one so you can customize as needed. Parts List: * 6x M3x8 screws * 2x M2.5x5 screws * [1x Wemos D1 Mini](https://www.amazon.com/dp/B081PX9YFV) * [1x DHT-22 Temperature/Humidity Sensor](https://www.amazon.com/dp/B0795F19W6) * [1x USB A Male Plug to DIP...
Topics: DHT-22, thingiverse, humidity, temperature_humidity, Wemos_D1_mini_case, temperature_sensor,...
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
dapenson cy (dapenson)
data
eye 0
favorite 0
comment 0
ESP8266外壳，内置nodemcu、红外发射LED，可通过mqtt控制电视开关等功能，自动配网
Topics: 3D Printer Parts, box, thingiverse, ESP8266, nodemcu, stl
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Mario Fr (DaBen)
data
eye 0
favorite 0
comment 0
This remix provides more internal Space for integrated circuit
Topics: thingiverse, case, ESP8266, stl, DIY
0
0.0
Feb 28, 2022
02/22
Feb 28, 2022
by
Thiemo Schuff (Starwhooper)
data
eye 0
favorite 0
comment 0
* removed hole out of cover * add switch My CH340 Adapter: https://de.aliexpress.com/item/32971337222.html
Topics: thingiverse, ch340, ESP01S, programmer, usb, ESP01, ESP8266, stl, Hobby
0
0.0
Feb 28, 2022
02/22
Feb 28, 2022
by
Hans Eendebak (npyl)
data
eye 0
favorite 0
comment 0
Designed for the ESP8266 V3 to be mounted vertically on a IN rail. The pins of the ESP8266 are protected and the width of the base makes it possible to push multiple ESP8266's against each other without them touching. The screwholes are for self tapping M3 screws into.
Topics: thingiverse, dinrailholder, Electronics, ESP8266, Dinrail, stl
0
0.0
Feb 28, 2022
02/22
Feb 28, 2022
by
Thiemo Schuff (Starwhooper)
data
eye 0
favorite 0
comment 0
Adapter: https://de.aliexpress.com/item/32971337222.html
Topics: thingiverse, ch340, programmer, Electronics, ESP01, ESP8266, stl
0
0.0
Feb 27, 2022
02/22
Feb 27, 2022
by
Jean-Charles Mammana (Psykokwak)
data
eye 0
favorite 0
comment 0
Case for this product (two relays) : https://fr.aliexpress.com/item/1005003597044488.html The 4 ears in the 4 corners are used to avoid wrapping during printing. You can cut them with a cutter.
Topics: thingiverse, Relay_Case, relay, Electronics, ESP8266, RobotDyn, stl
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
Burgess G (BurgessG)
data
eye 0
favorite 0
comment 0
I had a need for a giant button on my desk and I came across Adafruit's "Big Key Switches Macro Pad" design and it just about fit my needs. I redesigned both pieces for an ESP8266 and changed it to a single button design, no attachment handles I used one of Adafruit's giant keyboard keys and also added one of their 10mm diffused red LEDs. A few bits of wire, a 68ohm resistor, some solder and we're done! My button uses the ESP8266 to run automation through Home Assistant. I didn't want...
Topics: mechanical_keyboard, big, thingiverse, switch, keyboard, Electronics, ESP8266, large, LED, button,...
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
Atanas Yanev (ayanev)
data
eye 0
favorite 0
comment 0
# ESP8266 D1 Mini triple base board stand A stand for D1 mini with triple base pcb board WIP: Should design a holder for the ``d1mini-stand-panel-front``, the stand/holder should be 45 deg from base
Topics: thingiverse, Electronics, WeMos_D1_Mini, ESP8266, stl
0
0.0
Feb 23, 2022
02/22
Feb 23, 2022
by
Juan de Dios Garcia (jdgarcia99)
data
eye 0
favorite 0
comment 0
This is a custom enclosure that I made to automate my Mitsubishi AC into Home Assistant by using the Swicago project (https://github.com/SwiCago/HeatPump) I have used the implementation shown in this project through ESPHome, https://github.com/geoffdavis/esphome-mitsubishiheatpump, which works pretty well with the ESP8266 In my case, I'm using a TTL Shift Level Converter to deal with the logic signals from the Mitsubishi AC at 5V, but some others prefer to use resistors as shown in the project....
Topics: thingiverse, swicago, mitsubishi, esphome, case, enclosure, ESP8266, TTL, level shifter, stl, DIY
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
(Fabianurban)
data
eye 0
favorite 0
comment 0
"It will open your window slowly but surely"" This is a simple smart-home window opener which is low cost and easy to build. This design needs to be screwed to the top of your window, the intention was to leave no visible screw holes when removed in the future. The main target for construction was to use old parts laying around, the motor is quite slow with the m6 rod. I also recommend to use a modern stepper driver that is less noisy then the old A4988. Parts needed: -Printed...
Topics: thingiverse, esphome, window, nema17, ESP8266, opener, window_blinds, stl, DIY, lasercut
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
Giuseppe Lutri (LutriTech)
data
eye 0
favorite 0
comment 0
Ho realizzato un mini pc con un questo modello https://www.thingiverse.com/thing:2526480 utilizzando un wemos d1 mini e un display oled 0.96" Presto un articolo sul mio sito da stampare al 120%
Topics: thingiverse, WeMos_D1_Mini, minipc, ESP8266, Gadgets, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
Antonio Asaro (antonio_asaro)
data
eye 0
favorite 0
comment 0
Automatic shutters (for 63mm blade) using an esp8266 + mg90s servo esp8266 is connected to my Pi4 running HomeAssistant HomeAssistant is running ESPHOME. HomeAssistant is connected to GoogleAssistant. Servoholder is attached via hinge screw - FreeCAD file attached Note: you'll need to fidget with the min (closed) + max (opened) settings See it in action: https://www.youtube.com/watch?v=6-KS-gj4_vs&ab_channel=AntonioAsaro Formatting of YAML HomeAssistant YAML: input_number: blinds_servo:...
Topics: thingiverse, mg90s, esphome, Electronics, ESP8266, motorized, stl, home_automation, Homeassistant
0
0.0
Feb 20, 2022
02/22
Feb 20, 2022
by
Jonathan Caes (JonathanCaes)
data
eye 0
favorite 0
comment 0
IoT RGB LED Controller v2 This enclosure is designed to be used in combination with IoT RGB LED Controller v2 available on my Tindie store. Click here if you are interested to buy the controller. There are three versions of the enclosure. One which has no touch button. One which has the touch button inside the enclosure and makes it possible to touch the ring on top to activate the touch button. And one with the touch button outside the enclosure so you can place the button where you want.
Topics: Touch, thingiverse, RGB, Electronics, LED Strip, ESP12F, ESP8266, IoT, LED, LED Light, stl,...
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
Martin Hilcher (mhilcher)
data
eye 0
favorite 0
comment 0
The author of the original automatic tea machine does not allow remixes so I post this as a thing and I refer to https://www.thingiverse.com/thing:5211902. I created a plate for the case for closing the bottom. I also splitted the servo case into 2 parts that can be printed without support and can be glued together after printing. It's easier to get the servo cable into the case, too. I also rewrote the arduino code to work with the more current library for the TM1637 fom bremme,...
Topics: thingiverse, sg90, tea, servo, nodemcu_v2, esp8266_case, Kitchen & Dining, nodemcu, tea...
0
0.0
Feb 14, 2022
02/22
Feb 14, 2022
by
3d print nz (3d_print_nz)
data
eye 0
favorite 0
comment 0
I made this case to enclose a d1 mini with mini laptop cooling fan (cooling fan is not required for these chips as they don't produce much heat but i thought it would be cool). The design is still in development and the tolerance is quite low so some sanding may be required to fit the lid to base. the large opening on the end is there as i was planning on making an insert with female headers for plugging in external components to the D1 mini.
Topics: thingiverse, Wemos_D1_mini_case, Electronics, esp8266_case, stl, iot, electronics_enclosure
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
Christof Hohmann (TheScrewLooseGuy)
data
eye 0
favorite 0
comment 0
This is a nice wall clock, that can also display weather info and other stuff. It mainly consists of a ESP8266, a HTU21 and a NeoMatrix. It can either be mounted on a wall or set up using stands.
Topics: thingiverse, wall_clock, Electronics, clock, ESP8266, weather_station, stl
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
Jeremy Dix (BadgerJed)
data
eye 0
favorite 0
comment 0
I made this device to show the wind direction and wind speed, whilst I know you can show it on a screen in many different ways I wanted to make something non-screen based. It uses data from Home Assistant (HA) sent to an ESPHome programme. The data is from the local met office integration for wind speed and standard weather integration for wind direction - but you could set it to whatever source you wanted (I am considering as a future project to use a garden based weather station as the data...
Topics: thingiverse, esphome, Electronics, ESP8266, Home Assistant, stl
1
1.0
Feb 10, 2022
02/22
Feb 10, 2022
by
Przemysław Kiełbasa (klimp2)
data
eye 1
favorite 0
comment 0
Case for esp8266 nodemcu v3
Topics: arduino, thingiverse, NodeMCU_ESP8266, NodeMCU_V3, wifi_nodemcu, ESP8266, esp8266_case, Other,...
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Táta Geek (TataGEEK)
data
eye 1
favorite 0
comment 0
This is a remix. I made the hole for the oled display smaller and rounded the corners of the hole. The hole is ready for a 0.91" OLED display. PCB: https://github.com/LaskaKit/ESP-Vindriktning https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/
Topics: Vindriktning, esp32, thingiverse, domoticz, DIY, AirQuality_sensor, home_assistant, Tasmota,...
1
1.0
Feb 9, 2022
02/22
Feb 9, 2022
by
Simon Frost (spafrost)
data
eye 1
favorite 0
comment 0
This is a basic project box with vented lid for Node MCU and clone type devices. It has room above and below the device for activities, and M3-ish (2.8mm ID) posts to screw it down. I used this for a Node MCU, with an RF daughter-board mounted above it using stand-offs and a ribbon cable running around the end for connection.
Topics: box, thingiverse, project, NodeMCU_ESP8266, vented_box, Electronics, enclosure, nodemcu, stl
0
0.0
Feb 8, 2022
02/22
Feb 8, 2022
by
Dion Christensen (Dbrogaard)
data
eye 0
favorite 0
comment 0
Control Box for Raspberry Pi 3B+ & ESP8266 Relay
Topics: thingiverse, Fan_40X40X10mm, Wieland, 3D Printer Accessories, ESP8266, Control_box, Raspberry_pi_3,...
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Jens Kaphingst (_jpk)
data
eye 1
favorite 0
comment 0
Inspired by thing 4693081, I created a parametric version of a wordclock. Initially it was designed to fit for an IKEA Ribba frame of size 23x23, because I already have some of them at home. But it is possible to adapt to other frame sizes. Also the text and the font can be changed easily. The distance between each letter is chosen so that it is suitable for 60 LED/m WS2812 stripes. To print all parts, you need to export the frame, the inlay and the back cover as STLs from OpenSCAD. Each part...
Topics: openscad, thingiverse, DS3231, BH1750, clock, ESP8266, stl, DIY, wordclock
1
1.0
Feb 6, 2022
02/22
Feb 6, 2022
by
Markus Bart (markusbart)
data
eye 1
favorite 0
comment 0
I needed a lamp that doesn't glare into my eyes or onto the projection screen, while still putting some light on the table for my snacks. Lamp is 15cm tall, using RGB+CCD LED Strip, connected to my smart home via Wifi/MQTT, powered with 4x 18650 Li-Ion battery. Change lamp color by publishing a message with content similar to "0,0,0,0,0". It's red, green, blue, warmwhite, coldwhite. Values are 0..255. If any of the R,G,B values are >0, WW and CW are reset to 0 to avoid overcurrent...
Topics: Household, thingiverse, lamp, LED_lamp, smart_home, ESP8266, stl
1
1.0
Feb 4, 2022
02/22
Feb 4, 2022
by
Patrick Bollmann (patrickbollmann)
data
eye 1
favorite 0
comment 0
Case for a DIY SML Reader with Wemos D1 Mini ESP 8266 Parts and software can be found here: https://github.com/mruettgers/SMLReader
Topics: thingiverse, case, WeMos_D1_Mini, SML, ESP8266, smarthome, stl, DIY, iot
0
0.0
Feb 3, 2022
02/22
Feb 3, 2022
by
Rik Wijngaards (Lakloplak)
data
eye 0
favorite 0
comment 0
There is some adapter for the tiny esp07 and esp12 board, but they require you to solder it. I want to use the tiny boards as is, so here is a little clamp adapter that is easily made at home.
Topics: thingiverse, esp07, Electronics, esp12E, ESP12F, ESP8266, esp07s, adapter, stl, esp12
1
1.0
Feb 3, 2022
02/22
Feb 3, 2022
by
hndi müller (hndi)
data
eye 1
favorite 0
comment 0
This is a split flap display with 16 flaps and 3D printable numbers. The only things you additionally need are: A cheap 28BYJ-48 stepper motor and some short and long M3 bolts with hex nuts. And, if you want to control the motor, of course a microcontroller and a driver for the motor. If you want to make things easier, add a magnet with hall effect sensor. I provided a short assembly video with some details: https://www.youtube.com/watch?v=AOesbzHQ7VM Thanks to elefantman for providing the gear...
Topics: 28BJY-48, esp32, arduino, thingiverse, Electronics, display, ESP8266, stepper_motor, Lost,...
0
0.0
Feb 2, 2022
02/22
Feb 2, 2022
by
Evgeniy - (Fox_exe)
data
eye 0
favorite 0
comment 0
**Components:** --------------------- * 2x 2x5mm screws * 1x 2.5x20mm screw * 1x 12x12x3mm button with cap * ESP-01s + [WLED firmware](https://github.com/Aircoookie/WLED/releases) * Charger (TC4056A) + DC-DC boost controller * Custom board with soldered AMS1117-3.3v (ESP power and connections board. I cut from prototype board) * 3x15cm LED strip (WS2812b) * 1x 21700 or 18650 battery * Soldering iron + straight hands ^_^ **WLED tuning:** --------------------- Add presets ("API...
Topics: 21700, thingiverse, ESP01S, Electronics, ESP01, ESP8266, WS2812b, FreeCAD, stl
1
1.0
Jan 31, 2022
01/22
Jan 31, 2022
by
Felix Lenz (mueslirecords)
data
eye 1
favorite 0
comment 0
Ein smarter Desinfektionsmittelspender mit Home Assistant und ESPhome Alles weitere bei Github erklärt: https://github.com/FelixLenz-Code/Smarter-Desinfektionsmittelspender
Topics: thingiverse, ESPhome, Home Assistant, Desinfektionsmittel, Desinfektion, stl, DIY, esp8266
1
1.0
Jan 31, 2022
01/22
Jan 31, 2022
by
Tanner Rutgers (trutgers)
data
eye 1
favorite 0
comment 0
This is a case for a Wemos D1 Mini board that I designed for use with my D1 Minis that I use for custom LED strips. The case includes a few small cutouts for the micro-usb cable and 5v, ground, and DIN wires coming off the board respectively. It also includes a small lever/button for the reset button on the D1 mini. I've printed without supports fine, but the reset button may require them depending on your settings. The D1 mini should fit snugly in the case with no need for adhesive.
Topics: thingiverse, wemos, Wemos_D1_mini_case, 3D Printing, WeMos_D1_Mini, ESP8266, stl
1
1.0
Jan 30, 2022
01/22
Jan 30, 2022
by
Sylvio Schelle (usersylvio)
data
eye 1
favorite 0
comment 0
Thanks to sumfing for the greate designe. In my case i had a "azdelivery d1 mini" and "BME280". You can change the "airrohr_d1min_sds011" in FreeCAD and "airrohr_bottom_ventilation_bme280" under https://www.tinkercad.com/things/bUd51j9hSom . The printersetting is the same as in https://www.thingiverse.com/thing:2516382.
Topics: feinstaub, AzDelivery, thingiverse, D1_mini, luftdateninfo, SDS011, feinstaubsensor, airrohr,...
1
1.0
Jan 29, 2022
01/22
Jan 29, 2022
by
Stephen Bachhuber (AeroSteveO)
data
eye 1
favorite 0
comment 0
This is a part of the EspDeck project, the casing for the ESP8266 Device and keys. https://github.com/AeroSteveO/EspDeck
Topics: macropad_keyboard, thingiverse, macropad, esphome, Electronics, ESP8266, stl
0
0.0
Jan 28, 2022
01/22
Jan 28, 2022
by
Christian Gegg (technik_gegg)
data
eye 0
favorite 0
comment 0
# This is version 2 of my previously published [SMuFF-Ifc](https://www.thingiverse.com/thing:3485114). Originally made to overcome the lack of serial ports on the Duet3D controller board, it turned out that even on never boards like the SKR-2, running RepRap Firmware (RRF), serial ports a precious and rare. Hence, I revived the SMuFF-Ifc project. This time it comes in two flavors, a simple one based on a Wemos D1 module and the more poweful ESP32 DevKit / NodeMCU. For the ESP32 I even created a...
Topics: thingiverse, SMuFF, ESP32, 3D Printer Accessories, Serial-Splitter, ESP8266, RRF, Duet3D, stl
2
2.0
Jan 25, 2022
01/22
Jan 25, 2022
by
Douglas Mauro (douglasmauro)
data
eye 2
favorite 0
comment 0
ACEIRMC ESP32 D1 Mini Sled (case) - Board slides/snaps into bottom. Top then slides on a rail to encase the board. Extra wide USB port Topside extract for antenna area. extra *snap *when sliding on top Mounting holes no supports Note that this sled was designed to work with the ACEIRMC life version of the board. MELIFE version can be found here: https://www.thingiverse.com/thing:5203776 FWIW - I need a bunch of these for my WLED project. Each area needs a board/case that will mount neatly under...
Topics: esp32, thingiverse, 3D Printing, ESP8266, esp32 case, nodemcu, stl
1
1.0
Jan 25, 2022
01/22
Jan 25, 2022
by
David Martin (01Time)
data
eye 1
favorite 0
comment 0
Slightly tweaked the the bottom part of F14V's design by making access points for pins **VIN**, **GND**, and **D4**. Which allows for the easy connection of jumper wires to these pins to control individually addressable LEDs with **WLED**. I also fixed the RESET and FLASH labels on the top side (they were inverted and backwards in the STLs that I downloaded).
Topics: thingiverse, NodeMCU_ESP8266, WLED, Electronics, ESP8266, NodeMCU, stl
1
1.0
Jan 24, 2022
01/22
Jan 24, 2022
by
Miguel Alvarez (Camochu)
data
eye 1
favorite 0
comment 0
# ESP-01F programmer Due to the lucky fact than all pins needed to flash are in the same side of ESP module, I've designed a simply "bed" with all necessary connections. Because of the size of the module connections are too close, so I've decided to split them in "upper horizontal" ones and "lower vertical" others. Each group is in one piece of the model. I've used 1mm pogo pins inserted by pressure in models with enough room for wire soldering. In the floor of the...
Topics: 8285, 8266, thingiverse, flasher, programmer, socket, Electronics, ESP, ESP-01F, ESP8285, ESP8266,...
1
1.0
Jan 23, 2022
01/22
Jan 23, 2022
by
Marcel Forberger (marcel293)
data
eye 1
favorite 0
comment 0
This is a remix of the case by [Lorenz Nimmervoll](https://www.prusaprinters.org/de/prints/1510-wemos-d1-mini-case-with-power-jack) . Thanks to him! My changes: > snap fit case > ventilation in cover > fixation of the Power Jack > simplyfing inside for less supports/material > only one hole for cables
Topics: wled, thingiverse, D1mini, Electronics, ESP8266, esp8266_case, esp32_d1_mini, WS2812b, led, stl
1
1.0
Jan 23, 2022
01/22
Jan 23, 2022
by
(mcer12)
data
eye 1
favorite 0
comment 0
This is an enclosure for my Flora IV-6 VFD clock. It's last of my designs made in Tinkercad so you may have to slightly adjust the X and Y size in your slicer. Choose *IV-6 VFD Main filled.stl* if you want to print the enclosure in white. I personally suggest stone white PLA from Spectrum with particles. It very nicely hides imperfections. If you want to print it in a different color, choose *IV-6 VFD Main.stl*, this one has open holes for the dots. I suggest to print it with some darker...
Topics: thingiverse, esp8285, retro, VFD_clock, clock, nixie_clock, alarm_clock, ESP8266, vfd, stl, DIY
1
1.0
Jan 22, 2022
01/22
Jan 22, 2022
by
Valentin Gisi (V4L3N71N)
data
eye 1
favorite 0
comment 0
The housing for a CO2 measuring device that I constructed as part of a school project. For the building process you will need the following: 1. this case 2. microcontroller (NodeMCU ESP8266) 3. CO2 sensor (MH-Z19C-PH) 4. 4x jumper cable (male-female) 5. small piece of double-sided adhesive tape (⁓ 12 × 20 mm) 6. breadboard with adhesive tape on the back (e.g. SYB-170, size: 47 x 35 x 9 mm)
Topics: thingiverse, Physics & Astronomy, sensor, case, ThingSpeak, ESP8266, electronics, stl, CO2
1
1.0
Jan 21, 2022
01/22
Jan 21, 2022
by
Andreas Loeffler (pizzaani)
data
eye 1
favorite 0
comment 0
# Case for WEMOS Tripler Base for ESP8266 (D1 Mini) - Bottom stl to be screwed - Case stl (will follow)
Topics: thingiverse, wemos_case, Electronics, base, WeMos_D1_Mini, ESP8266, stl, shield
1
1.0
Jan 20, 2022
01/22
Jan 20, 2022
by
Nico Rey (reynico1)
data
eye 1
favorite 0
comment 0
Two-part case for an ESP8266 Deauther with Li-Po battery, using Firebeetle boards.
Topics: Wifi_Deauther, thingiverse, deauther, firebeetle, ESP8266, stl, DIY
1
1.0
Jan 18, 2022
01/22
Jan 18, 2022
by
John Fanjoy (thatguyoverthere42)
data
eye 1
favorite 0
comment 0
I have been looking around for a lamp project that would work for my desk as I desperately needed a lamp so I could work on things outside of daylight hours and have no overhead lighting in the room which is more of a windowed in porch than a real office. The vesa mount lamp by @nnorton00 took desk real estate into consideration, but I am using a tv with larger mounts as a screen and so this was not an option without figuring out how to redesign the complicated mount. This mounting base has...
Topics: thingiverse, lamp, led_strip, office, ESP8266, stl, Office
1
1.0
Jan 15, 2022
01/22
Jan 15, 2022
by
Jovian Dsouza (JoviTech)
data
eye 1
favorite 0
comment 0
Alexa controlled smart light / relay using ESP Controller
Topics: switch, cover, ESP8266, thingiverse, nodemcu, Electronics, Alexa, voice_control, stl, relay, smart
1
1.0
Jan 12, 2022
01/22
Jan 12, 2022
by
Justin Gutzman (jgutz20)
data
eye 1
favorite 0
comment 0
I really liked this design over the others out there, i just wanted a little bit more room within the case itself. I simply added 4mm to the height of the base. You can see the comparison of the original and my remix of this side by side above.
Topics: ESP8266, thingiverse, Case, NodeMCU, Electronics, 8266, NodeMCU_ESP8266, stl
1
1.0
Jan 10, 2022
01/22
Jan 10, 2022
by
Mark McKillen (btechsol)
data
eye 1
favorite 0
comment 0
A DIN rail mounted case for an ESP8266, PZEM-004T and a small 5Vdc PSU I've included the FreeCad model for folk that are interested!
Topics: ESP8266, thingiverse, Powermotor, pzem-004t, homeautomation, Electronics, stl
