5
5.0
Mar 17, 2021
03/21
by
Anton Dudochkin (DrGatling)
data
eye 5
favorite 0
comment 0
Eachine pro58 case for Eachine ev100 SLA print recommend
Topics: eachine_ev100, stl, eachine_pro58, thingiverse, Eachine, Hobby
3
3.0
Jun 22, 2021
06/21
by
jasper stomps (jappie46)
data
eye 3
favorite 0
comment 0
print on 35 % infill 0,2mm layer hight 100mm/s skirt will do the trick just fine support put at touching build plate and 90 degrees because only the pillar needs support.
Topics: stl, thingiverse, eachine_e013, Eachine_E010, Hobby, eachine_e013_whoop, eachine
10
10.0
Jan 18, 2021
01/21
by
Christian Steffes (Hazyhaze420FPV)
data
eye 10
favorite 0
comment 0
PLA 1,75mm 100% Infill Extruder Temp: 205°C Heatbed Temp: 60°C
Topics: drone arm, Eachine arm, thingiverse, Eachine, Eachine Falcon, Other, stl
9
9.0
Jan 17, 2021
01/21
by
Joel Vande Hey (jvhaerial)
data
eye 9
favorite 0
comment 0
Case for Eachine Tiny Whoop drones with storage for remote, 5 extra batteries and spare parts. Latching lid stays in place for transport
Topics: thingiverse, Eachine_E010_Whoop, Eachine, Eachine_E010, R/C Vehicles, eachine e013, stl
8
8.0
Jun 11, 2021
06/21
by
(TheTobby)
data
eye 8
favorite 0
comment 0
Summary Custom enclosure to convert a Eachine Googles Two over to monitor. Works great, but be adviced that it the screen is to small to use for flying. Perfect for spectating. Can be improved, but works good enough for now. No additional parts needed. Print Settings Printer: Anycubic i3 Mega
Topics: fpv, eachine_goggles, eachine_goggles_2, thingiverse, FPV_monitor, eachine_goggles_two, eachine, stl
10
10.0
Jan 12, 2021
01/21
by
Glen Miller (Kingmiwok)
data
eye 10
favorite 0
comment 0
This is highly inspired by KDan's Eachine Racer 250 Battery Tray http://www.thingiverse.com/thing:1289398 Great design but unfortunately it will not work for my quad since it came with the SPRacing F3 Flight Controller. One of the support legs of KDan's battery tray was blocking the USB port of the controller. I modeled this entirely from scratch, verified all dimensions on the quad itself, printed prototypes, and ultimately changed a few things (like the mounting legs). I did duplicate one...
Topics: R/C Vehicles, thingiverse, stl, Eachine, eachine_250, Eachine_Racer_250
5
5.0
Mar 3, 2021
03/21
by
David Hesprich (darkgrue)
data
eye 5
favorite 0
comment 0
This is an extension for [babar121's Tiny whoop Inductrix Case](https://www.thingiverse.com/thing:1580567). This adds to the box an additional 10mm to leave internal space for an antenna guard or other modifications that increase the height of the model.
Topics: Eachine QX90, Tiny Whoop, Inductrix, Eachine E010S, Eachine E010C, thingiverse, R/C Vehicles, stl,...
4
4.0
Jun 20, 2021
06/21
by
Laurent Den (Lauden)
data
eye 4
favorite 0
comment 0
External 3800mah 2S Gens ace lithium battery mount for EV800D goggle system. Double or triple your battery life! Works like Fatshark Goggles now and one less charger to drag around! The stock battery is 2 cell and has no balance tab, causing short battery life. Add a 3800mah 2S lithium polymer battery and strap it to the goggles using this battery mount. The mount can be ziptied to the goggle strap. Enjoy!
Topics: Hobby, Eachine_EV800D, thingiverse, stl, ev800d, Eachine
5
5.0
Jan 21, 2021
01/21
by
Clement ORTIZ (DF4ze)
data
eye 5
favorite 0
comment 0
As printed part are too weak. Every time the quad crash on the back, battery broke the plate. So i decided to split it in 2 to allow back part to be close to the FC stack. As this, when crash on the back, plate touch the FC stack and doesn't break (... doesn't break easily ;) ) You'll need some nylon brace! Deported VTX antenna... and tiny RX ! Have fun!
Topics: eachine_x220, wizard, thingiverse, wizard_x220, Eachine, x220, R/C Vehicles, eachine_wizard,...
3
3.0
Apr 4, 2021
04/21
by
Marco Heinze (MMH91)
data
eye 3
favorite 0
comment 0
Eachine Wizard X220HV Landing Pad in original Arm Design!
Topics: thingiverse, eachine_wizard_x220, 3D Printing, stl, Eachine_wizard_x220hv, Eachine
8
8.0
Jan 15, 2021
01/21
by
Yohann Bonamy (Welbior)
data
eye 8
favorite 0
comment 0
I build this thing to have an unbreakable frame QX95 style. AFter many test this is the most resistant frame i builded. Here is a video of flying : https://www.youtube.com/watch?v=mlWxu_0sWrg Motors are Racerstars 8520 8.5x20mm https://goo.gl/zrN44o For the camera and vtx i use the Eachine TX02 NTSC AIO 5.8G 40CH 200mW combo : https://goo.gl/LeIrPG The board is F3 Brushed Flight Control Board : https://goo.gl/v0kDz6 Now i use Realacc F3 V1.0 Betaflight Flight Control Board Integrated OSD :...
Topics: Eachine_TX02, QX90, R/C Vehicles, thingiverse, stl, nano_qx, eachine_tx03, eachine_tx01,...
6
6.0
Apr 20, 2021
04/21
by
Tomas Lamberto (tomaslamberto)
data
eye 6
favorite 0
comment 0
100% INFILL 0.15 or 0.2 Layer Height PLA or ABS
Topics: x220s, thingiverse, wizard_x220, eachine_wizard_x220, stl, eachine_x220, Hobby, Eachine, x220,...
9
9.0
Apr 28, 2021
04/21
by
John Cutburth (JCPhlux)
data
eye 9
favorite 0
comment 0
Sticks extender for the original Eachine e010 remote. Just remove the "hat" of the sticks and add the print part then add the "hat" back on top. I have added a shorter stick so they don't touch. So there is a 27mm stick and a 20mm stick.
Topics: thingiverse, Eachine, stl, Eachine_E010_Whoop, e010, R/C Vehicles, Eachine_E010
3
3.0
Apr 28, 2021
04/21
by
(Gillfish)
data
eye 3
favorite 0
comment 0
EACHINE Wizard X220 Micro Camera Adapter. I've designed a micro camera adapter for my EACHINE Wizard X220, it currently holds a Runcam Eagle Micro but it should hold other micro-cameras as well. It attaches to the front 2 M3 holes of the quad and replaces the carbon fibre camera holder, it protects the front of the camera as the print protrudes further than the lens. The max angle is about 35 degrees. The fixings which you would need: (2x) M3 square nut (2x) M2x12mm bolt (2x) M2 washer (2x)...
Topics: thingiverse, Eachine, stl, R/C Vehicles, EACHINE Wizard, eachine_wizard_x220
3
3.0
Mar 25, 2021
03/21
by
Elefterios (Lefty) Karakostas (Lefty9)
data
eye 3
favorite 0
comment 0
Whoop/Toothpick mount for the eachine tx06 aio cam Around 2.5 grams with 30% infill
Topics: stl, R/C Vehicles, whoop, eachine_tx06, thingiverse, eachine_wizard_x220, toothpick, Eachine
3
3.0
Apr 28, 2021
04/21
by
(Gillfish)
data
eye 3
favorite 0
comment 0
EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw spacing is 16MM Dia. So should fit other 16mm motors fine, please let me know if they fit your drone and ill add it to a list in this description for other people. I printed in orange PETG, but I recommend printing in TPU. DRONE: EACHINE X220 WIZARD.
Topics: thingiverse, drone, Eachine, drone_racing, stl, eachine_wizard_x220s, Hobby, eachine_wizard_x220
9
9.0
Jan 19, 2021
01/21
by
zoltan bzman (rgbskills)
data
eye 9
favorite 0
comment 0
Print with 100% infill and use flexible filament :)
Topics: fsi6s, thingiverse, Eachine, Hobby, eachine_wizard_x220, stl
9
9.0
Jan 14, 2021
01/21
by
Chris Fraser (thegwa)
data
eye 9
favorite 0
comment 0
Spanner for Eachine Wizard 220 motors. Specifically MN2205 motors, but should work with 2204 and 2206. Stops the finger death while trying to loosen or tighten the Nylock nuts. It is reversible for CW and CCW motors. Works with: * [Eachine-2205-MN2205](https://www.banggood.com/Eachine-2205-MN2205-2300KV-2-4S-Motor-For-Eachine-Wizard-X220-X210-250-280-FPV-Racing-Frame-p-1106611.html?p=7L15231635284201505P) *...
Topics: R/C Vehicles, thingiverse, stl, eachine_wizard, MN2205, spanner, Eachine, eachine_wizard_x220
11
11
Jan 10, 2021
01/21
by
Tony Rillieux (HoneyBaadger)
data
eye 11
favorite 0
comment 0
Opened a hole on the bottom to swap channels Flipped the Antenna outlet Moved the FC to VTX port this is my 4th version i'll prob update as needed
Topics: R/C Vehicles, thingiverse, stl, Eachine, eachine_wizard_x220, eachine_x220, wizard_x220
10
10.0
Jan 18, 2021
01/21
by
Christian Steffes (Hazyhaze420FPV)
data
eye 10
favorite 0
comment 0
To Be Printed With Nylon X Filament This is the lowe bottom plate for the eachine wizard x220 . Now you can give your qwad an extra arm stabilisation with this 4mm Lower bottom plate
Topics: thingiverse, Eachine, eachine_wizard_x220, Other, stl
5
5.0
Mar 15, 2021
03/21
by
Lorent Den (Lorent_Den)
data
eye 5
favorite 0
comment 0
Eachine ROTG02 Box
Topics: thingiverse, Eachine, Electronics, stl, eachine_rotg02, ROTG02
9
9.0
Apr 24, 2021
04/21
by
Geza Kovacs (sechuan)
data
eye 9
favorite 0
comment 0
Eachine 250 GoPro mount 15°
Topics: eachine 250, eachine, Eachine_Racer_250, GoPro_Mount, stl, eachine racer, R/C Vehicles,...
9
9.0
Mar 10, 2021
03/21
by
DeeJay (Kurtsteiner)
data
eye 9
favorite 0
comment 0
Transportbox für den Eachine Tiny QX90 mit Fach für Probeller und genaug Platz für die Prob Guards. Transport box for the Eachine Tiny QX90 with compartment for propeller and enough space for the Prob Guards.
Topics: eachine_qx90, stl, thingiverse, qx90, eachine, Hobby
9
9.0
Mar 20, 2021
03/21
by
Toby Matters (FatCnt)
data
eye 9
favorite 0
comment 0
This is a simple scanned copy of the frame and still a work in progress. Enjoy Added V2 Which is all beefed up where it counts, Hopefully stronger than the original but still keeping light.
Topics: QX90, Hobby, thingiverse, Eachine, eachine_qx90, stl
10
10.0
Apr 18, 2021
04/21
by
Markus Bart (markusbart)
data
eye 10
favorite 0
comment 0
I needed camera mounts, so I designed them for the TX04 and TX05 cameras. The two clips go behind the PCB and the tubes go over the vertical aluminium spacers of the frame. Side panels of the frame are not used with this camera mount, neither is the aluminium square part. Use flexible material for printing. I used NinjaTek Semiflex because it is less wobbly but still flexible enough. There are parameters for camera angle and printer tolerances. You might want to change these to match your needs...
Topics: eachine_tx05, eachine_tx04, eachine_firer_110, thingiverse, stl, R/C Vehicles
10
10.0
Jan 10, 2021
01/21
by
Tony Rillieux (HoneyBaadger)
data
eye 10
favorite 0
comment 0
i broke my adjustment screws on the sides so this mount takes the place of the rear plate to screw in. there is no adjustment but i may add a few differnt degrees and a different adjustable model. this fits the stock Eachine X220 camera and frame 3.9.2017 V3 removed some material from the standoffs to better clear the props, moved the mater fwd a tad for a bumper This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ageGbnDOBpl
Topics: thingiverse, 3D Printing, stl, eachine_700TVL, eachine_wizard_x220, 700tvl, eachine_x220,...
7
7.0
Apr 18, 2021
04/21
by
Clint Kingston (iClint)
data
eye 7
favorite 0
comment 0
Are you sick of your battery popping out of the head strap the moment you put the goggles on? This simple Battery holder will ensure your battery never pops out of the head strap unwanted again Look around on Thingsverse and many have come up with different solutions but most are very complicated, over engineered, require supports, will take forever to print. uuughh! BUT! not mine it prints in around 10 mins flat and installs on the battery even quicker! using some 3M double sided tape and...
Topics: thingiverse, Eachine, stl, R/C Vehicles, eachine_ev100
5
5.0
Mar 5, 2021
03/21
by
Evgeniy Lapin (Shaman_2010)
data
eye 5
favorite 0
comment 0
My version of the frame for the eachine E013 drone. Original frame weight is 3.89g, my (without battery frame) version is 4.00g. The idea of fixing gum is honestly borrowed from this model - https://www.thingiverse.com/thing:2753175 (good idea!). Two versions: with a frame for the battery and without it. Optional - motor shields. ------------------------------- Parts of the frame for the battery are printed and glued with Abs plastic, which must first be dissolved in acetone....
Topics: stl, R/C Vehicles, Eachine, eachine_e013_whoop, E013, eachine_e013, drone, thingiverse
4
4.0
Apr 1, 2021
04/21
by
Olivier Halfman (Olivarius)
data
eye 4
favorite 0
comment 0
This is a housing/case for the internal components of the Eachine EV800D FPV freestyle drone/drone racing googles. You can take out the screen and mainboard and put them in this housing to use as a separate screen. This way you friends can also watch your FPV feed. Take out the 4 screws from the housing and transfer the components, be care full not to snag of brake wires. To close the housing/case you can re-use the original screws. All can be printed with Cura's default (standard quality)...
Topics: Eachine, thingiverse, fpv, Eachine EV800D, Hobby, stl, drone
10
10.0
Jan 19, 2021
01/21
by
haydar sahin (baskm)
data
eye 10
favorite 0
comment 0
mounting rod/stick for eachine
Topics: thingiverse, eachine_wizard, eachine_wizard_x220, Other, stl
10
10.0
Jan 18, 2021
01/21
by
Aurélien Bouron (xyz_print)
data
eye 10
favorite 0
comment 0
Led protector for eachine x220s
Topics: x220s, thingiverse, Eachine, R/C Vehicles, eachine_wizard, stl
6
6.0
Apr 20, 2021
04/21
by
(sunsetvette)
data
eye 6
favorite 0
comment 0
I took Tommy 1972 xt60 holder and bonded it to my 220S top plate.
Topics: thingiverse, eachine_wizard_x220s, stl, R/C Vehicles, Eachine
8
8.0
Apr 17, 2021
04/21
by
Thomas Buck (xythobuz)
data
eye 8
favorite 0
comment 0
This little customizable angled case perfectly fits the Eachine TX03 AIO camera. You may have to slightly change some parameters in the OpenSCAD file to match your printer tolerances. The cut on the back-right-side is for the video-in and video-out cables for use with an OSD, it can also be disabled in the OpenSCAD file. For use with other quadcopter frames, the bottom 'slots' can be removed. That way, you can also print without supports.
Topics: aurora100, eachine_aurora_100, eachine_tx03, thingiverse, Eachine, stl, R/C Vehicles, AIO,...
5
5.0
Mar 4, 2021
03/21
by
Jim McCoy (RotoRanger)
data
eye 5
favorite 0
comment 0
battery holder for the Eachine Trashcan it holds 2 450mah 1s lipos.
Topics: battery_holder, stl, eachine_cinecan, R/C Vehicles, Eachine, 450mah, eachine_trashcan, thingiverse
2
2.0
Jan 18, 2022
01/22
by
Mike Korn (Skyline89)
data
eye 2
favorite 0
comment 0
Moved to: https://www.prusaprinters.org/prints/99984-eachine-wizard-x220s-frame-protection Print in TPU or PETG for best protection
Topics: eachine_wizard_x220s, fpv, wizard_x220, x220, thingiverse, R/C Vehicles, eachine_wizard_x220,...
3
3.0
Jan 4, 2021
01/21
by
Andrew Lintz (ATXcloud)
data
eye 3
favorite 0
comment 0
This is a Remix of [Jakezilla3's thing:4316407](https://www.thingiverse.com/thing:4316407). #UVUAV-v2: * Added vents * Access port to the power switch. #Eachine Pro58: * Expanded dial port - This is b/c the jakezilla3's design had it lip underhanging the dial, but the Eaching Pro58 cover & Uvuav base case so tightly that removal is requires a fair amount of force risking the underhang lip to snag the dial. * Expanded SMA port - Maybe this is just my SMA's connectors issue, but I needed to...
Topics: R/C Vehicles, stl, Eachine, thingiverse, eachine_pro58
2
2.0
Jan 18, 2022
01/22
by
Mike Korn (Skyline89)
data
eye 2
favorite 0
comment 0
Moved to: https://www.prusaprinters.org/prints/99997-eachine-wizard-x220s-antenna-relocation Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS
Topics: eachine_wizard, eachine_wizard_x220s, fpv, wizard_x220, thingiverse, R/C Vehicles,...
10
10.0
Jan 18, 2021
01/21
by
Daniel Ha (DH111)
data
eye 10
favorite 0
comment 0
This is a tiny, lightweight and fast to print protection for a camera on a Tiny Whoop frames. It clamps right and left at the original pints on the Frame.
Topics: screwless, thingiverse, tiny_whoop, Eachine, Eachine_E010, R/C Vehicles, Eachine_E011, stl,...
7
7.0
Jan 20, 2021
01/21
by
(sunsetvette)
data
eye 7
favorite 0
comment 0
This is a remix of my Wizard 220 top plate. The screw holes are positioned a little different and there are extra slots on the tail end for the rear lights. I printed at 100% fill and 3.5 mm thick for those enthusiastic crashes.
Topics: Eachine wizard 220S, stl, thingiverse, Radio_Control, Eachine, R/C Vehicles, eachine_wizard_x220s
9
9.0
Mar 18, 2021
03/21
by
Michael Heacock (Diymik)
data
eye 9
favorite 0
comment 0
This is a mini fpv mount for the E010: http://www.banggood.com/Eachine-E010-Mini-2_4G-4CH-6-Axis-Headless-Mode-RC-Quadcopter-RTF-p-1066972.html?rmmds=myorder And the Eachine mini fpv set: http://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?rmmds=myorder All of these mini fpv sets are slightly different, so i made one to suit the one i got. This has a 15deg tilt. The hoop is a little bit of a loose fit, so you don't have to trim it...
Topics: e010, Eachine_E010, fpv, Eachine_E010_Whoop, Quadcopter, stl, thingiverse, R/C Vehicles, Eachine
1
1.0
Apr 20, 2022
04/22
by
Benjamín Vajda (B-Cinematic)
data
eye 1
favorite 0
comment 0
Case for VRX Eachine 58proTX modeled by myself is designed to a bit loose fit because you need to add a bit of glue from a hot glue gun (i did it like that) on that side where are connectors, to hold both parts in place. Or you can leave it like that but there is a chance that it started falling out over time.
Topics: cyan, eachine_pro58, thingiverse, ev800d, Eachine_EV800D, fpv, drone, eachine, R/C Vehicles, stl
3
3.0
Mar 13, 2021
03/21
by
R K (Eleventy3)
data
eye 3
favorite 0
comment 0
Take 27 mins to print at 0.2. Designed this as my original top broke and the camera angle keep changing anyway by itself. The Eachine QX65 uses the Beecore V2 so anything that has the V2 should work with this. Weight is the same as original 2grm :) Witch hat style top takes the beating instead of the camera. Camera angle is 15 degrees. Printed from TPU. Hope this helps someone :)
Topics: thingiverse, Eachine_QX65, QX65, Eachine, R/C Vehicles, stl
6
6.0
Mar 5, 2021
03/21
by
Nicolas DOS SANTOS (Afterhender)
data
eye 6
favorite 0
comment 0
Hi printers, here a a shape I designe to fit a case I have for my X220S Eachine. For the moment it is done with foam but with the usage the foam starts to be a bit weak. In PLA this will be perfect. This case will fit: - 1 x Eachine X220S - 5 x 4S batteries 1300 - 1500mAh - 1 x Q6 lite charger - 1 x power supply (made of laptop charger) - 1 x tool for the propellers - 1 x usb cable - 1 x spare space
Topics: stl, R/C Vehicles, wizzardx220, Eachine, eachine_wizard_x220, x220s, eachine_wizard_x220s, drone,...
3
3.0
Mar 25, 2021
03/21
by
Aleksander (AleksanderFPV)
data
eye 3
favorite 0
comment 0
Made a simple tripod mount for my old eachine fpv screen. Only tested on the (2016) version.
Topics: stl, R/C Vehicles, eachine screen, 7 monitor, thingiverse, Eachine 7 inch, tripod mount eachine
2
2.0
Apr 5, 2021
04/21
by
Loïc Goffinet (loicgoff)
data
eye 2
favorite 0
comment 0
Amélioration de ma clé de serrage pour les hélices de mon drone. il est imprimé en PLA.
Topics: thingiverse, helice, quad, drone_racing, drone, eachine_wizard_x220, eachine_x220s, stl, Hobby,...
1
1.0
Apr 20, 2022
04/22
by
Maks Samson (MakSsYT)
data
eye 1
favorite 0
comment 0
Hi guys, the original dorn sticks are crap and not very precise so I decided to change it and design my new sticks.
Topics: thingiverse, eachine_e52, Joystick, e52, stl, Eachine, Hobby
6
6.0
Mar 5, 2021
03/21
by
JR Roxx (Elemmacil)
data
eye 6
favorite 0
comment 0
Designed for the eachine X220HV Print in TPU with support
Topics: wizard_X220HV, Eachine_wizard_x220hv, stl, R/C Vehicles, Eachine, eachine_wizard_x220,...
4
4.0
Apr 1, 2021
04/21
by
eric (EELL)
data
eye 4
favorite 0
comment 0
Got bored the other day and decided that my mobula 6 1s lipo charger needed some clothing. Other than not having to use the charger with the board exposed it also helps you identify if its charging in “High” or “Low” voltage mode (my senile brain needs that). I used some garden wire to hold mine together, easy enough. Printed mine in PLA. Tried sanding it for the photos above, not overly satisfied with the result. But whatever it still does what its supposed to. I think that the ur65...
Topics: Eachine, eachine_trashcan, uk65, thingiverse, R/C Vehicles, us65, lipo_charger, eachine_uk65,...
6
6.0
Jun 21, 2021
06/21
by
Kyle L (Kylellrc)
data
eye 6
favorite 0
comment 0
This is a compact alternative to the case that comes with the Eachine Trashcan that can hold way too many batteries and spare props. There are multiple configurations that you can make alongside with the top lids being able to connect to the bottom for more storage.
Topics: R/C Vehicles, eachine, thingiverse, stl, eachine_trashcan
3
3.0
Mar 19, 2021
03/21
by
Mike Korn (Skyline89)
data
eye 3
favorite 0
comment 0
Print in TPU or PETG, replaces the LEDs
Topics: wizard_x220, R/C Vehicles, Protection, drone, eachine_wizard_x220s, thingiverse, eachine_x220s,...
