4
4.0
Mar 15, 2021
03/21
by
Scott Opsahl (24scotto)
data
eye 4
favorite 0
comment 0
This is a housing for converting the Eachine EV800D box goggles to a stand alone monitor. To simplify the assembly, the screen and the buttons are held in place with a bit of hot glue or a flexible adhesive (E6000 or similar). Put a bit of adhesive between the screen support and the back of the screen. Bend the connecting tab on the three-button set to 90 deg. and secure to the housing with a bit of adhesive. The battery can be secured to either the CCA or the rear housing using double sided...
Topics: 3D Printing, ev800d, thingiverse, Eachine_EV800D, stl
4
4.0
Jun 20, 2021
06/21
by
Laurent Den (Lauden)
data
eye 4
favorite 0
comment 0
External 3800mah 2S Gens ace lithium battery mount for EV800D goggle system. Double or triple your battery life! Works like Fatshark Goggles now and one less charger to drag around! The stock battery is 2 cell and has no balance tab, causing short battery life. Add a 3800mah 2S lithium polymer battery and strap it to the goggles using this battery mount. The mount can be ziptied to the goggle strap. Enjoy!
Topics: Hobby, Eachine_EV800D, thingiverse, stl, ev800d, Eachine
4
4.0
Apr 1, 2021
04/21
by
Olivier Halfman (Olivarius)
data
eye 4
favorite 0
comment 0
This is a housing/case for the internal components of the Eachine EV800D FPV freestyle drone/drone racing googles. You can take out the screen and mainboard and put them in this housing to use as a separate screen. This way you friends can also watch your FPV feed. Take out the 4 screws from the housing and transfer the components, be care full not to snag of brake wires. To close the housing/case you can re-use the original screws. All can be printed with Cura's default (standard quality)...
Topics: Eachine, thingiverse, fpv, Eachine EV800D, Hobby, stl, drone
0
0.0
Aug 14, 2022
08/22
by
Bastian Kolb (Basti13)
data
eye 0
favorite 0
comment 0
Case tu turn your EV800DM into a base station. U can use the original button covers. You'll need: 4 pcs M3*12-16mm countersunk bolt 2 pcs M3 nut (optinal) 1 pcs XT30 1 pcs buck-converter 1 pcs USB C Breakout ( https://tinyurl.com/yckvmzaj ) 1-2 pcs Diode to prevent backfeeding through the USB port and XT30 port (this is optional for extra protection) There are two srew holes in the back to mount attachments. Hole spacing: 25 mm (M3)
Topics: EV800DM, Eachine_EV800D, stl, Electronics, thingiverse, fpv, eachine_ev800, ev800d, Eachine,...
0
0.0
Aug 15, 2022
08/22
by
Gabor Varga (vgabor99)
data
eye 0
favorite 0
comment 0
Magnifier lens adapter for the Eachine EV800D FPV goggles. Allows mounting 107x50x4mm welder lens. Mounting: Glue or screw the adapter to the googles. Cut the lens to fit you nose. Trim the top corners of the lens to fit inside the goggles.
Topics: magnifier, Eachine_EV800D, diopter, stl, thingiverse, fpv, ev800d, Eachine, R/C Vehicles
1
1.0
Apr 20, 2022
04/22
by
Benjamín Vajda (B-Cinematic)
data
eye 1
favorite 0
comment 0
Case for VRX Eachine 58proTX modeled by myself is designed to a bit loose fit because you need to add a bit of glue from a hot glue gun (i did it like that) on that side where are connectors, to hold both parts in place. Or you can leave it like that but there is a chance that it started falling out over time.
Topics: cyan, eachine_pro58, thingiverse, ev800d, Eachine_EV800D, fpv, drone, eachine, R/C Vehicles, stl
4
4.0
May 1, 2021
05/21
by
Jacob Baron (barontechnologies)
data
eye 4
favorite 0
comment 0
Simple benchtop holder for the EV800D monitor. Contoured to conform to the curvature and angles of the back of the screen. Easily rest the monitor on your workbench or share with friends while you fly.
Topics: stl, ev800d, Eachine_EV800D, Eachine, fpv, fpv_monitor_mount, thingiverse, R/C Vehicles, ev800
