4
4.0
Jan 9, 2021
01/21
by
Mitch Pleune (mitchpleune)
data
eye 4
favorite 0
comment 0
I made some 7mm feet extenders, because after flipping my electronics box upside down it hangs out the bottom a bunch. It needs 4x m4x25mm instead of the 20mm that they come with, or 30mm would work too.
Topics: thingiverse, stl, ender_5, 3D Printer Parts, ender_5_pro, ender_5_upgrades, ender_5_plus,...
3
3.0
Apr 2, 2021
04/21
by
MacDerson Louis (macderson)
data
eye 3
favorite 0
comment 0
This version extends the arm back to keep the black cable cover from touching any parts of the y-axis motor, and rods. It also adds support for the Bowden tube. inspired by thing: thing:3872380 Inspired by: https://www.thingiverse.com/thing:3872380
Topics: ender_5_plus, Creality_Ender_5_Plus, ender_5_upgrades, thingiverse, 3D Printers, ender_5_pro,...
4
4.0
Apr 3, 2021
04/21
by
Marc Monlouis (Sh0dan)
data
eye 4
favorite 0
comment 0
Hi If you think that ender 5's visible endstop switchs looks like unfinished you can easilly remedy with that simple cover. Installation takes about 5 mn: ### Print Settings Resolution: 0.2 Infill: 20% or more no support, build plate adhesion printing time : About 20 mn per cover. ### What you need ? - 6 x M3x16mm countersunk head screws =>...
Topics: thingiverse, Creality_Ender_5, ender_5_pro, 3D Printer Accessories, Creality_Ender_5_Plus, ender_5,...
2
2.0
Apr 20, 2022
04/22
by
John Griesbach (handyman20000)
data
eye 2
favorite 0
comment 0
This is a right hand mirrored version of the original. I added V2 file of STL with slightly larger USB CAP storage cutout.
Topics: ender 5 plus, thingiverse, ender 5 upgrades, tool holder, Creality Ender 5, ender 5 pro, Tools,...
4
4.0
Jan 9, 2021
01/21
by
Mark Kom (DiSrUpTeR)
data
eye 4
favorite 0
comment 0
A firm left size display mount for a creality 12864 display on an Ender 5 (pro, plus)
Topics: thingiverse, stl, 3D Printer Parts, ender_5_pro, ender_5_upgrades, ender_5_plus, Ender_5
3
3.0
Mar 21, 2021
03/21
by
Greg Wippler (gwippler)
data
eye 3
favorite 0
comment 0
This is my take on a filament guide for a Direct Drive Conversion on my Ender 5 Pro. It Uses a Bowden Tube mount to keep the original Spool location. It has a removable Tube assembly for the attachment on the Extruder. I made it Mount with a M5 Bolt so you can remove the Guide while still having the block attached with the Cable tie to hold cables. This way it makes feeding in new spools easier to access the extruder arm to feed the filament in straight. To mount the Spool Filament Guide you...
Topics: stl, ender_5_upgrades, 3D Printer Extruders, ender_5, Creality, ender_5_plus, Creality_Ender_5,...
3
3.0
May 1, 2021
05/21
by
Greg Brubaker (gbru316)
data
eye 3
favorite 0
comment 0
Adds an SD card reader to the original LCD relocate part. Existing solution was 2 seperate parts and was designed for a stock mounted control box. This solution is for rear mounted control boxes.
Topics: stl, Ender, ender_5, Creality_Ender_5, Creality, Creality_Ender_5_Plus, ender_5_plus, 3D Printer...
3
3.0
Jan 17, 2021
01/21
by
David Holt (Aremihc)
data
eye 3
favorite 0
comment 0
Remixed tool holder. Holds all the Ender 5 tools plus tweezers and an Xacto knife. Clips into the rail on of a 2020 or 2040 extrusion (such as what's on the Ender 5). It fits VERY tight, but doesn't move once it's there. If mounting on the broad side of the extrusion, put it in the right-hand channel so the flush cutters have room to clear.
Topics: Creality_Ender_5, ender_5_upgrades, 3D Printer Accessories, ender_5_pro, thingiverse, ender_5, stl
3
3.0
Jun 10, 2021
06/21
by
Jared Brodeur (DaBrode)
data
eye 3
favorite 0
comment 0
This is a mount for the Winnsinn Dual Gear Extruder in a direct drive application. I recommend extending all screws to the next length available to install this kit although is seems the originals will catch ok. This pairs well with my Ultimate Filament Spool Holder also on Thingiverse... https://www.thingiverse.com/thing:4377387 Enjoy!
Topics: thingiverse, ender_5_upgrades, ender_5, ender_5_plus, ExoSlide, Creality_Ender_5,...
5
5.0
Jun 12, 2021
06/21
by
(benebrady)
data
eye 5
favorite 0
comment 0
Summary I needed a place to put my metric ruler because I kept losing it under my keyboard. What better place to keep it but with the printer. The post that goes through the hole in the ruler is 7 mm in diameter. Please consider providing a Tip for the Designer as I am on a very limited Social Security income. I do these designs because I have fun doing them and I could use a little money to buy filament to do my test prints. You may also send an Amazon Gift Card to benebrady@gmail.com Print...
Topics: thingiverse, ender_5, Creality_Ender_5, stl
5
5.0
Jun 11, 2021
06/21
by
(benebrady)
data
eye 5
favorite 0
comment 0
Summary Ender 5 fans, here's your tool holder, with extras. Slots for all of the Allen keys, a full-sized SD card or microSD card adapter, a microSD card, the microSD card reader that comes with the Ender 5, a place for your nozzle , 2 screw drivers, the nozzle socket driver and both wrenches as well as the side cutters. As a bonus, there's a shelf to hold your screws and small parts as you're working on your printer OR you can put your Raspberry Pi on it. It attaches to the 20 x 20 extrusion...
Topics: thingiverse, ender_5, Creality_Ender_5, stl
4
4.0
Apr 20, 2021
04/21
by
Jacopo Di Matteo (MadBlackJack)
data
eye 4
favorite 0
comment 0
Even with the anti-black-lash leadscrew, the Ender 5 bed tends to drop once powered off, particularly with mirror or glass beds. One of the major causes for this is the z-axis leadscrew tends to suffer from axial precession (wobble). This add-on fixes the issue, and will also stabilize the bed considerably. In the original model, the hole was undersized (too tight tolerance) and I didn't have a drill to expand the hole, this version of the model doesn't require expansion of the hole. This will...
Topics: thingiverse, 3D Printer Parts, stl, ender_5_bed_support, ender 5, ender_5_upgrades, Creality_Ender_5
2
2.0
Nov 30, 2021
11/21
by
Lorenzo Di Mauro (scippo97)
data
eye 2
favorite 0
comment 0
This is a remix of the Ender 5 Linear Rail Mod but exclusively for the Y Axis. The reasoning behind this remix of mine is that the original thing doesn't account for using longer Linear Rails (350mm or more) which may be useful for some people. In my case I had a 380mm Linear Rail, but the stock setup would not allow me to mount it because a lot of space is occupied by the Y axis Tensioners and the Y rod Supports. This is where the magic comes: I have found absolutely NO replacement Y rod...
Topics: thingiverse, Creality_Ender_5, ender_5, stl, 3D Printer Parts, Ender-5
3
3.0
Jun 22, 2021
06/21
by
Evan Br (eb3d_printing)
data
eye 3
favorite 0
comment 0
Designed some 3D printed Oldham Couplers for my Ender 5 Plus. The ones available didn't match up with the bolt pattern on the 5 Plus' lead screws. Suggest Printing at 100% infill with 0.12 layer height and 4 walls. Uses M3x8mm to attach to brass nut and M3x10/12mm to attach to Z Gantry Bar.
Topics: stl, Ender, ender_5_pro, thingiverse, ender_5, ender_5_upgrades, coupler, ender_5_plus, Creality,...
7
7.0
Jun 11, 2021
06/21
by
(benebrady)
data
eye 7
favorite 0
comment 0
Summary This is a companion model to my 40 x 40 Ruler Hook for the Ender 5 that I posted previously. I figured I might as well do one for my set of digital calipers as well. Please consider providing a Tip for the Designer as I am on a very limited Social Security income. I do these designs because I have fun doing them and I could use a little money to buy filament to do my test prints. You may also send an Amazon Gift Card to benebrady@gmail.com Print Settings Printer Brand: Creality Printer:...
Topics: thingiverse, ender_5, Creality_Ender_5, stl
8
8.0
Jun 12, 2021
06/21
by
(benebrady)
data
eye 8
favorite 0
comment 0
Summary I didn't like the way the stock spool holder mounted on the extrusion for the printer so I modified my Ender 3 spool holder to mount onto the Ender 5 Please consider providing a Tip for the Designer as I am on a very limited Social Security income. I do these designs because I have fun doing them and I could use a little money to buy filament to do my test prints. You may also send an Amazon Gift Card to benebrady@gmail.com Print Settings Rafts: Doesn't Matter Supports: Yes Resolution:...
Topics: thingiverse, ender_5, Creality_Ender_5, stl
3
3.0
Jan 6, 2021
01/21
by
Jiarui Hong (jerryfromearth)
data
eye 3
favorite 0
comment 0
This is a remix from [Dampening Feet for 2020 Extruded Aluminum by rkrammes](https://www.thingiverse.com/thing:1543152). Some changes from the original design: 1. Change the clamp so it fits INSIDE the groove of the rail, instead of clamping outside the rail. This is because my printer (Ender 5) has the motherboard chassis installed in the front, thus there's no way to clamp through it using the original design. 2. Split it into two STL. 3. Fix the initial layer height problem with one of the...
Topics: Creality_Ender_5, stl, ender_5, Creality_Ender_5_Plus, Creality_Ender_5_Pro, thingiverse, 3D...
2
2.0
Nov 30, 2021
11/21
by
Evan Br (eb3d_printing)
data
eye 2
favorite 0
comment 0
Wanted to test out HexOrt inspired wobble wings on the ender 5 plus to see if it would help with layers lines. After about 2 months of testing, I can say they have significantly reduced layers lines on most of my prints. Will Need: 10mm Magnets 3mm Bearings M3 x 8 MM Bolts/Nuts
Topics: ender_5_plus, thingiverse, Creality_Ender_5, ender_5, stl, Creality, 3D Printer Parts,...
4
4.0
Jun 7, 2021
06/21
by
Gait Distortion (TR-909)
data
eye 4
favorite 0
comment 0
Hi, If you download and use this, please give it a like and/or a collect! If you print it, please post a make with pictures of the end result! Thank you!! -------------------------------------------------------------------------------- Update 20 june 2020, I'm busy with a little upgrade, to get the full y axis. This upgrade will work for everyone that did this mod and doesn't need any extra parts other then one extra thing. Stay tuned......
Topics: ender_5_bed_support, Creality_Ender_5, thingiverse, 3D Printer Parts, stl, ender_5_upgrades,...
3
3.0
Apr 24, 2021
04/21
by
Nicola JEAN (nj1337)
data
eye 3
favorite 0
comment 0
This is guide for the filement, for the ender 5 if you use a direct drive. Just use all stock screw and nuts from the extruder.
Topics: Creality_Ender_5, thingiverse, stl, ender_5, ender_5_upgrades, 3D Printer Accessories
3
3.0
Apr 17, 2021
04/21
by
David Holt (Aremihc)
data
eye 3
favorite 0
comment 0
This is a cover for the control screen on the Ender 5. I added a mount for this Pi 4 that I got: https://smile.amazon.com/gp/product/B07XTRFD3Z/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Also slimmed the door down to account for the new mount and changed the tab to the bottom as a result (not shown in pic) For ease, I manually removed supports from the notches in Cura when I printed it and it worked fine.
Topics: Creality_Ender_5, ender_5_pro, thingiverse, stl, ender_5, 3D Printer Accessories
3
3.0
Jan 6, 2021
01/21
by
Jooshua Franssen (maseo)
data
eye 3
favorite 0
comment 0
Added a simple bltouch mount by cutting one from a different model and meshing it up with a dual 5015 version of this mount. Works perfectly fine, needs some tweaking on your end, but so far all prints are flawless. **With stock MK8 offsets are:** Measured X-51 Y-19 Z-4 from nozzle, but double check yourself. In current build for SKR Mini E3 V2: **NOZZLE_TO_PROBE_OFFSET { 49, 32, -4 } ** **Supports:** Board only.
Topics: Creality_Ender_5, stl, ender_5, 3D Printer Parts, ender_5_pro, thingiverse
3
3.0
Apr 24, 2021
04/21
by
john fredin (pax13)
data
eye 3
favorite 0
comment 0
Switching heated bed orientation, needed new strain relief. This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/5x5UBh0PHH6
Topics: ender_5_upgrades, Creality_Ender_5, strain_relief, 3D Printing, ender_5, stl, Creality,...
3
3.0
Oct 26, 2021
10/21
by
Evan Br (eb3d_printing)
data
eye 3
favorite 0
comment 0
These are a remake of the stock corner brackets that come on the Ender 5 Plus. I made these as a temporary replacement. They will not work on the Top Back corners unfortunately without moving the location of the end stop.
Topics: Creality_Ender_5, 3D Printer Accessories, Ender 5 Plus, Ender 5, stl, thingiverse
6
6.0
Mar 9, 2021
03/21
by
Kris Kersey (KerseyFabrications)
data
eye 6
favorite 0
comment 0
Update Nov. 13, 2019: I have decreased the size of the idler holder as much as I can (v23). This means that the total loss of X movements should only be around 13-15mm. While this may be unacceptable to some, this is worth it to me for the rigidity you get for only having plates for connectors instead of large 3D printed pieces. After all, why add rails and then put a lot of plastic parts back between your components? (My opinion. I welcome yours.) I also added the STEP file so others can remix...
Topics: ender_5_linear_rails, stl, thingiverse, Ender5, ender_5, ender_5_upgrades, 3D Printer Parts,...
2
2.0
Jan 5, 2021
01/21
by
Szymon Ochocki (greenmagic)
data
eye 2
favorite 0
comment 0
A simple way to strengthen the printer and attach plexiglass sheets to create a housing that maintains the internal temperature. I am sending three versions: -standard -with holes through which you can screw the mounting screws - the same as above and additionally three M3 holes for attaching plexiglass.
Topics: Creality_Ender_5, stl, 3D Printer Parts, Ender, Creality_Ender_5_Plus, ender_5_pro, thingiverse,...
3
3.0
May 21, 2021
05/21
by
Rob Poulter (zarify)
data
eye 3
favorite 0
comment 0
I didn't like how the filament tube and the cabling sleeve for the hotend were cabled tied together as the tube is quite short and was making some quite tight angles at the far corner of the print bed. After cutting all but the last cable tie however the cable sleeve was in danger of getting caught behind the stepper. I printed up this attachment which bolts to the frame just past the stepper and cable tied the sleeving on top of it, with enough slack to allow the hotend to move to the far X...
Topics: thingiverse, ender_5_upgrades, ender_5, Creality_Ender_5, 3D Printer Accessories, stl
3
3.0
Jan 6, 2021
01/21
by
Paulo Eduardo Godoy (pauloeduardogodoy)
data
eye 3
favorite 0
comment 0
A remix of Dimide thing with some small modifications: 1) Removed some over-material left in the left hand back rail. 2) Removed the BL Touch fixture to save some weight. 3) Added recesses to better seat the nuts in the front rails.
Topics: Creality_Ender_5, stl, ender5pro, ender_5, Ender, ender_5_pro, Ender5, thingiverse,...
2
2.0
Jan 18, 2022
01/22
by
Tyler Schwab (icondrz)
data
eye 2
favorite 0
comment 0
Upgraded my extruder to a dual gear extruder and the existing runout sensor no long lined up with the extruder. instead of just making a spacer i decided to redesign the whole thing as the existing one sucked to get the filament through idea of the design is to push a chunk of capricorn through where the filament feeds through and cut a notch out of it with a razor blade designed to work with existing micro switch and screws printed with pla with no supports
Topics: thingiverse, ender 5 plus, creality, Creality_Ender_5, ender 5, stl, 3D Printer Parts
3
3.0
Mar 25, 2021
03/21
by
John Brooks (Jonnb)
data
eye 3
favorite 0
comment 0
I wanted a light bar for my ender 5 plus but I could not find one that fit my standard led strips so I took xqqqqme's clips and modifies them to fit LilTrublMakr's bar I modified without the v slot and this is what I came up with. the second picture is in complete darkness except the light bar. I hope this helps someone
Topics: stl, thingiverse, ender_5_light, plus, ender_5, led, LED ender 5, 3D Printing
4
4.0
Dec 1, 2021
12/21
by
Jon Harper (jonspaceharper)
data
eye 4
favorite 0
comment 0
This is a set of mods I made to move all of the wiring on an Ender 5 to the left side. I have a Makergadgets Innovator Control enclosure, and the wiring access point is on the back left. To get the electronics outside of the enclosure, I had to make these changes to the Ender 5. **Note that these changes require flashing your firmware.** First is a support brace for the bed wiring with two points for zip ties. You'll need an M4 x 12mm screw to secure this where the stock M4 x 10mm currently on...
Topics: creality_ender_5, creality, thingiverse, ender_5_pro, ender_5, stl, 3D Printer Parts
4
4.0
Jun 12, 2021
06/21
by
Micah Rummler (MicahRummler)
data
eye 4
favorite 0
comment 0
Print Settings: 4 to 5 Walls 4 Top 4 Bottom 20 % infill Use supports. Enjoy !
Topics: Creality, Bowen guide, thingiverse, ender_5_pro, Ender, ender_5, ender_5_upgrades, 3D Printing,...
5
5.0
Mar 9, 2021
03/21
by
Kyle Finnigan (TrigoKlei)
data
eye 5
favorite 0
comment 0
EDIT: Added a GAP version which increases the length of the tool holder so that the spatula does not rest against the frame. It is not tested so print at your own discretion. This is a tool holder for all the stock tools provided with the Creality Ender 5. It snaps on to either sides of the Ender 5 and comes in 2 versions: with and without the Creality Ender logo. It is compact and does not get in the way when handling the printer. Additionally it can be installed and re-positioned without any...
Topics: tool_holder, stl, thingiverse, 3D Printer Accessories, ender_5, ender_5_upgrades,...
5
5.0
Jun 12, 2021
06/21
by
(benebrady)
data
eye 5
favorite 0
comment 0
Summary Today's design of the day is an LED mounting bracket for the Ender 5. Since the belt runs in the front and rear v-slot of the x-axit and the wheels run in the top and bottom v-slot of the x-axis there's really not a good way to mount and LED strip to the Ender 5 that will illuminate the print bed. This model will attach to the bolts that go through the wheels on the X carriage using a couple of M5 nuts, (you may want to use longer bolts) and then the LED rail just slides onto the...
Topics: thingiverse, ender_5, Creality_Ender_5, stl
4
4.0
May 1, 2021
05/21
by
Adrià Cereto i Massagué (ssorgatem)
data
eye 4
favorite 0
comment 0
A mount for the BigTreeTech Filament Smart Sensor for direct drive conversion kits that use the stock (or compatible) extruder of the Ender 5. It should work the same for the Ender 5 Pro and Ender 5 Plus. I guess It will work for an Ender 3 too if the motor has the wires at bottom rather than the side. It's a bit rough since it's the first thing I've ever made with Tinkercad, but it works for me.
Topics: stl, BTT, DirectDrive, ender_5, Creality_Ender_5, Creality_Ender_5_Plus, mount, Filament_Sensor, 3D...
2
2.0
Nov 30, 2021
11/21
by
Kevin Davies (Cortexian)
data
eye 2
favorite 0
comment 0
Designed to work with M3 bolts and T-Nuts. I removed the little bucket for the SD card and USB drive since I use Klipper and a Raspberry Pi 4 on my Ender 5 Plus. Designed this because over time the original I remixed from lost its grip on the 2040 extrusion and started to slide down the post.
Topics: ender_5_plus, thingiverse, 3D Printer Accessories, Creality_Ender_5, ender_5, tool_holder, stl,...
3
3.0
Jan 7, 2021
01/21
by
Flavio Mathys (skyloler)
data
eye 3
favorite 0
comment 0
This is a remix of the SpeedDrive v1. I changed the spacing of the Mounting plate, so i could mount the dual gear extruder. So if you want to change the extruder, heres the link: https://www.banggood.com/Upgraded-Aluminum-Dual-Gear-Pulley-Dual-Drive-Extruder-Kit-For-Creality-CR-10-or-CR-10S-or-CR-10S-Pro-or-Ender-3-or-Ender-3-Pro-3D-Printer-p-1469345.html?rmmds=search&cur_warehouse=USA I can confirm it working on the Ender 5 Pro.
Topics: stl, ender_5, 3D Printer Parts, Ender, ender_5_pro, thingiverse, ender_5_upgrades
8
8.0
Mar 8, 2021
03/21
by
Renaat Grauwels (Taaner)
data
eye 8
favorite 0
comment 0
Make your ender-5 nozzle visible - minimum X-dimension equals to -36 mm, this allows complete bed level sampling. - Increased print volume in the Z-direction with 25 mm Since the X-axis motor is turned upside down, the X-axis motor drive direction has to be inverted. If you are using a Z-endstop switch : in addition you should elevate somehow your switch with 25 mm. My cooling system is from : https://www.thingiverse.com/thing:2751027
Topics: stl, thingiverse, Creality, Ender, Ender5, Ender-5, ender_5_upgrades, Ender 5, 3D Printer Parts,...
3
3.0
Mar 26, 2021
03/21
by
Tianyu Liu (tliu93)
data
eye 3
favorite 0
comment 0
# Ender 5 cable support ## Why make this? The cable and extruder pipe of my ender-5 sometimes hit the circuit board of position limiter of X axis. So I have made a simple accessory to cover on this circuit board, so that the cable can move a little bit smoother. ## Remark This is the first version, after I have made the first printing, I realized several places can be improved. A improved version will be updated soon.
Topics: stl, thingiverse, Creality_Ender_5, Creality, ender_5, 3D Printer Accessories, ender_5_upgrades
4
4.0
Mar 31, 2021
03/21
by
Gait Distortion (TR-909)
data
eye 4
favorite 0
comment 0
Hi, If you download and use this, please give it a like and/or a collect! If you print it, please post a make with pictures of the end result! Thank you! -------------------------------------------------------------------------------- Hi, If you got a ender 5 with dual Z-axis https://www.thingiverse.com/thing:4079052 then here are the Z-rod covers that fit the front assembly of the z axis! -------------------------- little note: I removed the cover arround the stepper motor, so that the motor...
Topics: ender_5_upgrades, thingiverse, 3D Printer Parts, ender_5, Ender5, Creality_Ender_5, stl
4
4.0
Mar 22, 2021
03/21
by
Josh Kendall (k3nd0)
data
eye 4
favorite 0
comment 0
Update: I added the files ungrouped to make it easier to select which ones you want to print I remixed the remix of the cam mount covers to add a cam mount on the left side since that is where I wanted my camera. I included all the original files so you can pick and choose which side you want to print w the cam mount and which you want without. I added files for the covers inverted since I think they will print the best that way, please note the cam mount covers will most likely need support...
Topics: stl, ender_5_upgrades, ender_5_belt_covers, ender_5_wyze_cam, ender_5_camera_mount, 3D Printer...
4
4.0
Mar 15, 2021
03/21
by
Nick Johnson (Peterpiper05)
data
eye 4
favorite 0
comment 0
I took the original design in which the bracket was too large and separated it from the GoPro connection, made it 1mm smaller(that's all it needed), re-aligned the piece that the GoPro connects to because it was off centre and pulled on the entire thing(now it doesn't) and then re-joined the 2 pieces
Topics: GoPro, Creality_Ender_5_Pro, thingiverse, GoPro_Mount, Creality_Ender_5, Ender 5, ender_5_pro, stl,...
3
3.0
Jan 19, 2022
01/22
by
James Hausman (webhaus)
data
eye 3
favorite 0
comment 0
Remixed from: https://www.thingiverse.com/thing:4093687/files Moved the screw over to better align the guide directly over the top of the extruder. This is Bowden tube guide for Ender 5 or Ender 5 Pro. Use the existing Y-Axis pulley screw to mount the clamp over the top of the extruder stepper and it keeps the bowden tube and X axis cabling away from the Y axis rollers.
Topics: bowden, ender_5_pro, thingiverse, Creality_Ender_5, stl, ender_5, 3D Printer Accessories
3
3.0
Jan 6, 2021
01/21
by
Ben Kl (digitalhigh)
data
eye 3
favorite 0
comment 0
Hello, and thanks for checking out my first-ever upload to Thingiverse! I just got an Ender-5, and like many others, noticed the lack of freedom in the length of the power cables. I didn't want to mount the PSU to the back of the model like other mods, as that would potentially cause instability and require supports for the frame, so instead opted to create a clip system that lets me slide it back a few inches, which solve all of my problems. The bottom clips are designed to be just a few mm...
Topics: Creality_Ender_5, stl, ender_5, clips, ender_5_pro, power_supply_mount, thingiverse,...
5
5.0
Mar 15, 2021
03/21
by
Fabian Hauschild (Xerber)
data
eye 5
favorite 0
comment 0
These Are some Holders i designed for the Ender 5 Plus to prevent the Glas Plate from slipping. The Holders for the Front and the Back easily Clip onto the Bed and its supporting Structure. The Holders for the Sides require to unscrew the Bed construction an then easily slide into place.
Topics: ender_5_plus, thingiverse, Creality_Ender_5_Plus, Ender, stl, Ender_5, 3D Printer Accessories
5
5.0
Mar 31, 2021
03/21
by
dave wilson (woodwaker)
data
eye 5
favorite 0
comment 0
UPDATE 02/25/2020: Check out my Ender 5 Plus customization many of the mods for the Ender 5 have been updated or improved, almost all work for an Ender 5. https://www.thingiverse.com/thing:4162889 I have put all of the mods that I have made or used in one place. Many of these can be done independently, others work together. All of the original sources are listed, If I missed any please let me know and I'll correct. Sources https://www.thingiverse.com/thing:4027970 E3D Hemera - Nighthawk Parts...
Topics: 3D Printing, thingiverse, ender 5, ender 5 Plus, stl
3
3.0
Jan 5, 2021
01/21
by
Adrian Bedford (Adieuk)
data
eye 3
favorite 0
comment 0
hello this is my modded led light bar holder for my ender 5 plus but will fit others on the main bracket i used 50% infill and on the led holder i used 100% infill this is to fit the led which was from amazon this is the link https://www.amazon.co.uk/gp/product/B07SM7F7WN/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Topics: Creality_Ender_5, stl, Creality_Ender_5_Plus, thingiverse, ender_5_upgrades, 3D Printer Accessories
2
2.0
Nov 8, 2021
11/21
by
Pedro Sarabando (PSarabando)
data
eye 2
favorite 0
comment 0
REMIX
Topics: stl, ender_5_pro, ender_5, 3D Printer Accessories, Ender, Creality_Ender_5, thingiverse, Creality
4
4.0
Mar 31, 2021
03/21
by
Gait Distortion (TR-909)
data
eye 4
favorite 0
comment 0
Hi, If you download and use this, please give it a like and/or a collect! If you print it, please post a make with pictures of the end result! Thank you! -------------------------------------------------------------------------------- There wheren't any y-axis back covers so i had to make my own, i based them on the Y front covers from D_Jespersen. This cover includes a adjustable silent switch. You can adjust the switch in 3 directions. * Use a long bolt with washers to adjust the endstop of...
Topics: ender_5_upgrades, thingiverse, 3D Printer Parts, ender_5, Ender5, Ender, Creality_Ender_5, stl
3
3.0
Apr 1, 2021
04/21
by
Konstantin Rudoy (krudoy)
data
eye 3
favorite 0
comment 0
Designed to use with Micro Swiss Direct Drive Base for Ender 5. As a bonus - now it is so easy to operate extruder's spring arm. Screwed to the base using 2x m3x12 screws Needed to attach a 3/4 inch [split wire loom tubing](https://www.amazon.com/gp/product/B07RWR4RH6) to the hotend to run all the wires. Based on [thing:4565248](https://www.thingiverse.com/thing:4565248), but the original one was designed to have smaller diameter of tubing and was designed for different hotend.
Topics: ender_5_plus, thingiverse, Micro Swiss, ender_5_pro, ender_5, 3D Printer Accessories, Direct Drive,...
