4
4.0
Jan 9, 2021
01/21
by
b_cfm (b_cfm)
data
eye 4
favorite 0
comment 0
***"32-30/70mm E3v2 SH"*** ***A 30mm by 70mm Spool Holder for Ender 3 v2*** --- First, I made the [73mm outer 32mm inner Ender 3 Spool Adapter SUNLU](https://www.thingiverse.com/thing:3416290) *by GrassRootz* Then, guess what, the Ender 3 v2 spool holder has an end piece with diameter of 36mm... I couldn't slide my spools. Furthermore, I think that default 90mm is too long to have a good balance, so I reduce length to 70mm. I designed this spool holder with a start diameter of 32mm +...
Topics: Ender3v2, thingiverse, ender3_v2, filament_spool_holder, stl, spool_mount, 3D Printer Parts,...
4
4.0
Mar 16, 2021
03/21
by
Martin STEFFEN (tiphedor)
data
eye 4
favorite 0
comment 0
To fit the all metal extuder (the red one) onto the MDD 1.3 from PrinterMods, with the stock cooling system.
Topics: mdd_v13, allmetal, thingiverse, printermods, Creality, Ender_3, Ender3, stl, 3D Printer Parts,...
4
4.0
Mar 18, 2021
03/21
by
Eduardo Cruz (eduardofcr)
data
eye 4
favorite 0
comment 0
Simple endoscope support for ender 3 (using octoprint)
Topics: endoscope, Ender3, ender 3, simple, support, thingiverse, endoscopio, 3D Printer Parts, stl
4
4.0
Mar 15, 2021
03/21
by
Sven Erik Janz (xseven7)
data
eye 4
favorite 0
comment 0
Der Filamenthalter ist 12mm breiter als das Original somit passen auch Spuhlen mit 80mm breite darauf. Die Mutter geht etwas stram über der Seitenschneider Halter, mit etwas Kraft lässt sie sich gut darüber drehen. The filament holder is 12mm wider than the original, so spools 80mm wide also fit on it. The nut goes a little tight over the side cutter holder, with a little force it can be turned over it well.
Topics: ender3, thingiverse, filament, filament_holder, Creality, filament_spool_holder, Ender,...
4
4.0
Jan 7, 2021
01/21
by
qurvento qurvento (qurvento)
data
eye 4
favorite 0
comment 0
Hidden but handy. Tight fit in V-slot regardless of the printer calibration. Fast print.
Topics: Ender-3 tool holder, stl, fingers tool holder, holder, tool, Ender-3, Ender_3, 3D Printer Parts,...
4
4.0
Mar 15, 2021
03/21
by
Rafael Sandrini (rsandrini)
data
eye 4
favorite 0
comment 0
I did this split on .stl to be able to print in my ender 3 since was large than my print area. I uploaded two versions, one with 4 parts and another with 2 parts. I used the bottom with 4 parts and then I realize that I could print this in 2 parts, so I split the top part in two and worked well. Sending both versions to ensure that you can choose the better for you. I used LuBan (https://www.luban3d.com/) to split the parts, but I warn you that will be necessary some sanding in the connectors...
Topics: 3D Printing, bass, thingiverse, subwoofer, hexibox, Ender3, stl, hexibase
5
5.0
Mar 5, 2021
03/21
by
Michael Lange (lange23)
data
eye 5
favorite 0
comment 0
Dual Hoatend Mount with connector panel/board/plate-holder, it looks like the King's Crown Inclusive Lamps/ Diodes Addon Set this by typing in the terminal: M218 T0 X0.0 Y0.0 M218 T1 X-36.1 Y0.0 M500 (to save the settings) Start printing and adjust the settings if they don't fit on your mount (also works on the fly and don't forget to save with command M500)
Topics: Creality_CR-10, stl, CR10, dual_color, dual_material, heavy_duty, CR10s, Ender3, 3D Printer...
3
3.0
May 1, 2021
05/21
by
b_cfm (b_cfm)
data
eye 3
favorite 0
comment 0
***"Micro USB Fist Hanger"*** ***Connector Protection (Ender 3 v2)*** --- A simple mix of : *- [USB Cable Holder Fist](https://www.thingiverse.com/thing:4293411) by blackguest* *- [Ender 3 v2 USB Port Protector](https://www.thingiverse.com/thing:4567825) by MrWraith2* Thanks for their great job ! --- *Enjoy !*
Topics: stl, Ender3_USB, microusb_hole, Ender3v2, 3D Printer Parts, ender3_v2, thingiverse, ender3_upgrade
4
4.0
May 1, 2021
05/21
by
b_cfm (b_cfm)
data
eye 4
favorite 0
comment 0
***"Reversible Spool Holder"*** ***A fun 30mm by 70mm Spool Holder for Ender 3 v2*** --- Same as my previous design but threading at end makes it stronger and the spool is better blocked in the holder. Reversible property is useless by the way but fun ! --- *Enjoy !*
Topics: stl, Ender3_Spool_Adapter, ender_3_v2, ender_3_upgrade, Ender3v2, 3D Printer Accessories,...
3
3.0
Apr 27, 2021
04/21
by
Robert Lorincz (lorinczroby)
data
eye 3
favorite 0
comment 0
Hi everyone! This is my latest design, a direct extruder using a planetary gearbox plus the big (12mm diameter) dual drive bondtech style gear-set. Short spek: - Gear ratio - 7.5 - Filament pushing force 120Ncm - 12.4 Kg - Filament acceleration up to 660mm/s^2 - Retraction speed: 60mm/s - Overall weight is about 140g The extruder is driven by a small round nema 14 stepper (86g, 1.88A 13Ncm). The orbiter printing @ 200mm/s on my MachCube 2.1: https://youtu.be/aZolOWtBbME In the last months I...
Topics: Bondtech_extruder, Direct_extruder, planetary, Orbiter, thingiverse, bondtech_bmg, Ender_3_Pro, the...
3
3.0
Mar 19, 2021
03/21
by
3Diy project (3DiyProject)
data
eye 3
favorite 0
comment 0
https://youtu.be/1NOeZQipoK0 If you want support us on Patreon: https://www.patreon.com/3diyproject Follow us on Instagram: https://www.instagram.com/3diyproject/?hl=it And don't forget to subscribe to our youtube channel!! Link to Banggood: XANES 1102 L2 5Modes 1600 Lumens USB Rechargeable Camping Hunting LED Flashlight 18650 Flashlight Led Flashlight 18650 Flashlight Torch Flashlight from Lights & Lighting on banggood.com https://banggood.app.link/xX2SHjRRl5 IF THE “DOWNLOAD ALL”...
Topics: PLA, 3dprintable, lightning_mcqueen, helmet, Ender3, DIY, thingiverse, Survival, technology, guide,...
6
6.0
Mar 2, 2021
03/21
by
3D Maker (Shine75)
data
eye 6
favorite 0
comment 0
I enjoy a lot the bearings that scarpantes has designed (https://www.thingiverse.com/thing:3019490), but they have to be removed each time from the spool to be put onto a new spool, and are not easy to be kept on the new spool while inserting it on the spool holder. So I made this "add-on" to be able to make all of this easier, allowing to easily remove the spool while letting the bearings on the spool holder, and make it easier to insert the new spool. The 2 files : -...
Topics: Creality_CR-10, Ender_3, creality_ender_3, thingiverse, stl, CR10, CR-10, 3D Printer Accessories,...
3
3.0
Jun 6, 2021
06/21
by
Aden P. (Ploopus)
data
eye 3
favorite 0
comment 0
All I did was make the hole 2mm in diameter rather than the size of a PTFE tube. The only reason to use this instead of the original is if you don't have any PTFE tube laying around.
Topics: Creality, creality_ender_3, filament_guide, thingiverse, CR-10, Ender, stl, CR10, Ender3, Ender_3,...
4
4.0
Apr 1, 2021
04/21
by
TOSHIHIKO KIJIMA (Tommykijima)
data
eye 4
favorite 0
comment 0
Remixed from: Ender 2 cooling fan 5015 https://www.thingiverse.com/thing:2780652 Added a hole for the fixing bolt. Added a hole for the M3 nut when fixing the fan. Ducts are made a little smaller, and a problem that the duct may be lower than the nozzle is corrected. A step file has been added, please make corrections if necessary.
Topics: cooling_duct, 5015, 5015_fan_duct, thingiverse, 3D Printer Parts, Ender3, stl, 5015s
4
4.0
Jun 10, 2021
06/21
by
Rob Fulcher (roefoo)
data
eye 4
favorite 0
comment 0
**UPDATE (04 Apr 2020)** A year later, the open-ended feet are still holding up well on my Ender 3. Not surprised, since they're not *that* springy, but it's good to know a design's stable before putting your printer on it! * * * **UPDATE (13 Apr 2019):** Attached photos are of the 25 mm version fitted to my Ender 3 after printing in Orange SainSmart TPU using some unconventional settings. See Print Settings below for further details. * * * Originally designed by...
Topics: creality_ender_3, 4040_extrusion, 2040_extrusion, Ender_3, feet, printer_feet, 3D Printer Parts,...
4
4.0
Apr 20, 2021
04/21
by
Steven Lawson (StevenMLawson)
data
eye 4
favorite 0
comment 0
This is (yet another) BLTouch mount for the Ender 3. Included is a version that also has a mount on the other side for attaching an [IL series Keyence laser micrometer](https://www.keyence.com/products/measure/laser-1d/il/models/index.jsp). X and Y Offsets --------------------- #define X_PROBE_OFFSET_FROM_EXTRUDER -40 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -12 // Y offset: -front +behind [the nozzle] Probe Z Offset --------------------- I've been been...
Topics: thingiverse, 3D Printer Parts, stl, Ender_3, bltouch_mount, BLTouch, Ender3
3
3.0
Apr 2, 2021
04/21
by
Alan (AlanWhereAreyou)
data
eye 3
favorite 0
comment 0
Remix of "(Yet Another) Ender 3 BLTouch Mount by StevenMLawson" [here](https://www.thingiverse.com/thing:3584158) Added sleeves to make the fan-shroud-screws somewhat captive. I always hated having to remove the fan shroud because those screws were impossible to not-drop, and nearly impossible to preposition for install. This solves that problem. You can still remove them completely, but the sleeve keeps them from falling down as you install/remove the guard and fan shroud. Works with...
Topics: creality_ender_3, Ender_3, BLTouch, thingiverse, openscad, 3D Printer Parts, Ender3, bltouch_mount,...
4
4.0
Mar 22, 2021
03/21
by
kynam (kyNam)
data
eye 4
favorite 0
comment 0
기록을 남기고자 합니다. I want to keep only a record. ender 3 용 인클로저를 만들었다. I made an enclosure for the ender 3. 실제로 출력할때는, 조명이 너무 뜨거워 출력물의 모양이 제대로 되지 않았다. At the time of actual printing, the lighting was too hot and the printout did not look right. 그래서 난 다른 미니 전등을 분해하여 5V LED 부품을 얻고, 인터넷에서 DC-DC 컨버터를 구입하였다. So I disassemble another mini...
Topics: stl, 3D Printer Accessories, Ender3, ender_3_accessories, creality_ender_3, Ender_3, thingiverse
4
4.0
Mar 22, 2021
03/21
by
kynam (kyNam)
data
eye 4
favorite 0
comment 0
이것은 단지 기록용입니다. This is for only record. 3d 프린터를 사용하면서 항상 소음에 시달렸습니다. I was always struggling with noise while using the 3D printer. 제가 아니고 제 마누라가요 Not me, but my wife. 마누라를 위해, 마누라의 잔소리를 듣지 않기 위해, 인클로저를 만들게 되었습니다. For my wife, I decided to create an enclosure to avoid listening to my wife's nagging. 만드는 과정보다는 무엇이...
Topics: ender3, stl, 3d_printer_enclosure, 3D Printer Accessories, thingiverse, enclosure, ender_3
3
3.0
Jun 11, 2021
06/21
by
(squirrelf)
data
eye 3
favorite 0
comment 0
Please consider donating if you find it useful (use the buy me a coffee at the bottom or "tip designer" button), thank you! two options: - one with an extra vertical support that slides on the side Y beam. not sure if needed but I made it anyway. it will keep the motor elevated, not touching the side Y beam, uses 2x m4 screws and nuts. (slots in the support part are for the m4 nuts). The initial idea behind it was to use it as a way to do minor vertical alignment adjustment, for...
Topics: Creality, creality_ender_3, Ender_3, ender_3_dual_z, t_nut, dual_z_axis, Dual_Z_Axis_Ender_3, 3D...
5
5.0
Mar 10, 2021
03/21
by
Michał Schlieske (MichalSch)
data
eye 5
favorite 0
comment 0
Filament spool with 1-4 sections. You need to print a base and 1-4 separators (one for each section).
Topics: ender3, ender_3, stl, thingiverse, 3D Printer Accessories, creality_ender_3, filament_spool
4
4.0
Mar 13, 2021
03/21
by
James Corprew (SHENKOE)
data
eye 4
favorite 0
comment 0
Well it's been awhile but I wanted to share this remix, converting the standard hotend mounting to a more versatile setup...... magnetic holder for hotend. I never planned on making changes to all the files for the ender 3 setup.... but thats what happened in the end. Still the same design and construction, and still operates and mounts to the Ender 3 as the original. Only changes small changes were made extended the bmg mount the extruder to the hotend as it is now 6-10mm in the +direction for...
Topics: 3d_printer, 3D Printer Parts, thingiverse, ENDER3, Ender_3, ENDER, creality_ender_3, stl,...
3
3.0
Mar 19, 2021
03/21
by
CJ Se (Iron_Scorpion)
data
eye 3
favorite 0
comment 0
Lithophane calibration wheel specifically for 0.12mm (magic number) step size. All of the other lithophane calibration prints I could find on thingiverse were on a 0.1 step size. But on a printer like the Ender3, which has a 0.04 z-step, means that some layers get rounded up or down to the closest step interval. Using 0.04mm steps you only occasionally hit even 0.1mm multiple layer heights (yes 0.2 and 0.4, but not 0.1 or 0.3, etc). Printing using magic numbers on an Ender3 means that most...
Topics: Ender3, numbers, calibration, Ender, litho, 3D Printing Tests, thingiverse, Lithophane, picture, stl
4
4.0
May 1, 2021
05/21
by
mr pink (pengupanda)
data
eye 4
favorite 0
comment 0
made the spool and holder fit up to 100mm spools.
Topics: stl, spool_holder, Ender3, filament_spool_holder, Ender3v2, 3D Printer Accessories, thingiverse
4
4.0
Mar 22, 2021
03/21
by
Angus Lo (rainbow_star)
data
eye 4
favorite 0
comment 0
The small 20x20 XYZ cube really doesn't work well for a print bed larger than 100x100 so I design this 100x100 XY ruler for printer that have a larger print bed.
Topics: calibration, stl, calibration_test, printer_calibration, Ender3, creality_ender_3, 3D Printing...
9
9.0
Jan 16, 2021
01/21
by
Jean-Marie Astruc (J-Max)
data
eye 9
favorite 0
comment 0
(Very) fast printing led strip rail for 2020 aluminium profile (6mm groove). The led strip is mounted at a 30° angle for full area coverage from two corners (leds usualy opens at 60°). Tested and approved. Same principle and same printing speed as my 10mn cable clip for 2020 profile : https://www.thingiverse.com/thing:2645563 and as my loop (open or closed) cable guide : https://www.thingiverse.com/thing:2666871
Topics: Creality, Led_Holder, led_strip, Creality_CR-10, 2020, cr-10, stl, LEDs, thingiverse,...
3
3.0
Apr 2, 2021
04/21
by
Aaron Ward (award0586)
data
eye 3
favorite 0
comment 0
This is a way to wire LED strips to and Ender 3 if you only have 12 LED strips and don't want to buy more. Like in my case i only needed a couple lights for a light to go on my bullseye. Having to put the lights side by side does limit your options of where you could put them but i have included a file that will print you a bracket that will hold them side by side really nice you can make it longer in your slicer or shorter. Also included a picture of how to wire the 12v lights up so they will...
Topics: LED_light, thingiverse, Hotend_LED, 3D Printer Accessories, Ender3, stl, Bullseye_Duct
3
3.0
Jan 6, 2021
01/21
by
Jo Kr (Andun)
data
eye 3
favorite 0
comment 0
This is a laptop stand for my 15" laptop. The other laptop stands I found were made for 13" laptops or were to big for my ender 3 print bed. Therefore I designed this laptop stand with seperate parts to fit my ender 3 v2 print bed. The upright parts slide into each other like puzzle tiles. The horizontal beams stabilize it. I added some hooks at the back for future accessories to hold e.g. cables. A Din A4 page fits between two horizontal stands.
Topics: laptop, stl, nosupport, Office, laptop_stand, thingiverse, 15inch, Ender3, stand
5
5.0
Mar 4, 2021
03/21
by
Imran Zachajew (Exmantion)
data
eye 5
favorite 0
comment 0
This is Spool holder designed for 18mm spools (spool's mounting hole). It is 15mm in diameter so can easily manage smaller spools. Designed for Ender 3 mounting, so you can just replace original one with this, the same way like you did during ender 3 assembling. Designed for 200g spools, but i think it can handle 1kg as well, especially with 100% infill, i used 50% and it came really strong. Main mounting is M30x1.5 (Fusion360) thread. At the end it has little end stop so the spool is nocked...
Topics: spool_holder, 3D Printer Parts, thingiverse, Ender3, upgrade_ender3, stl
5
5.0
Jun 11, 2021
06/21
by
(netooweb)
data
eye 5
favorite 0
comment 0
Summary This is a decorative cover for a 180mm plant pot. The low cost of injection moulded black polypropylene pots makes them a far better choice than 3D printing pots. They are however generally unattractive and not idea for indoor plants for that reason. The model is a thin, low plastic, cover that improved the look of these black pots. The model is in two part and either can be printed as a full model or in spiral (vase) mode. A good functional project for beginners. Print Settings Printer...
Topics: plant, flower_pot, plant_pot, creality_ender_3, Ender_3, indoor_garden, beginners, thingiverse,...
1
1.0
Apr 20, 2022
04/22
by
Northern Maker (NorthernMaker123)
data
eye 1
favorite 0
comment 0
Thank you for your interest in my model! If you download my design please consider leaving a tip. I am a high school student trying to earn money for college, and I love to work on making new designs. Thanks! Description (2-in-1 air motor/pump working model) Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 50-100% Hardware: 8X m4 or m5 Bolts water/pneumatic fittings water/pneumatic tubing 4 standard skate bearings sandpaper 1X motor body 2X shaft 3X pistons...
Topics: tool, air_engine, all_ages, diy, FunctonalDesign, new, 3d_printed, Kids_Toys, customized, prusa,...
3
3.0
Mar 24, 2021
03/21
by
David (ironman517)
data
eye 3
favorite 0
comment 0
I had problems with the sability of the original clip. It broke on me twice while printing. This new clip has longer arm and the holes are filled in. Donate filament A little bit $1.00 USDA few prints $3.00 USDA quarter roll $5.00 USDHalf a roll $10.00 USDAn entire roll $20.00 USD
Topics: stl, creality_ender_3, thingiverse, Ender3, 2020, Ender_3, 3D Printer Parts
5
5.0
Mar 5, 2021
03/21
by
Belin Fieldson (thebelin)
data
eye 5
favorite 0
comment 0
I like having a filament guide, but I wanted it to also act as a filament runout detector and put some tension on the filament so I don't get backups on my spool, which can cause tangling. I started with this: https://www.thingiverse.com/thing:2917932 Print this thing so the hole is on z, standing up, and the arm lays flat. I designed it so that it doesn't need supports to print. You might have to drill out the filament hole, particularly if you get a lot of elephant foot or overextrusion on...
Topics: octoprint, stl, Ender_3, 3d_printer, Ender3, runout, creality_ender_3, vslot, 3D Printer Parts,...
2
2.0
Apr 20, 2022
04/22
by
Kyle Garrity (boby171555)
data
eye 2
favorite 0
comment 0
Box designed for the Ender3
Topics: 3D Printer Parts, thingiverse, BTT, 2020, stl, Ender3
5
5.0
Mar 22, 2021
03/21
by
Furio Prints (FurioPrints)
data
eye 5
favorite 0
comment 0
Don't use this one. The mount is weak. Use this one: https://www.thingiverse.com/thing:3685710 2020 Ender 3 filament guide and cleaner all in 1. It really helps to prevent nozzle clogs by removing dust prior to filament entering extruder. Simply insert a piece of foam and load filament. Clean foam every week or so.
Topics: spool, stl, 3D Printer Accessories, Ender3, creality_ender_3, Ender_3, thingiverse, filament_guide,...
2
2.0
Jan 18, 2022
01/22
by
Joseph Gonzalez (Another_averagejoe)
data
eye 2
favorite 0
comment 0
My cell phone needed a little bump up to get a better viewing angle so I made this little spacer since I couldn't find one already Added a 4 bolt as well
Topics: thingiverse, ender3pro, 2020extrusion, Ender3v2, 2020_extrusion, stl, 3D Printer Parts, Ender3
3
3.0
Jun 7, 2021
06/21
by
Justin Goodson (Goodsons_Hobbies)
data
eye 3
favorite 0
comment 0
About I finally got around to mounting some lighting above my printers, I designed this mounting for 7.5-8mm wide strips of LED lights like you can find here (this is not an affiliate link): https://www.amazon.com/gp/product/B075RYSHQQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I could probably make this fit other widths of lights, comment me and I'll see what I can do. The LED strips slide in from either end. Printing It prints with no support, I designed in a couple of helper...
Topics: creality_ender_3, LED, 2020_extrusion, ender3, 3dprint, thingiverse, creality, stl, ender, 3D...
5
5.0
Mar 31, 2021
03/21
by
Justin Haglund (checkerbomb)
data
eye 5
favorite 0
comment 0
Mini Maglite flashlight holder for 2020 extrusion.
Topics: 2020, thingiverse, maglite, 3D Printer Accessories, flashlight, stl, ender3
3
3.0
Apr 27, 2021
04/21
by
Ty (Blazin64)
data
eye 3
favorite 0
comment 0
I liked RogueGeek's design and chose to re-purpose it for my 18mm U-channel LED strips. Along with nearly any other printer with 2020 V-slots, it works with the Ender 3 and Ender 3 Pro.
Topics: Ender_3, thingiverse, LEDs, 2020_V-Slot_Extrusion, v-slot, led_strip, Ender_3_Pro, Ender3, LED,...
2
2.0
Nov 30, 2021
11/21
by
Τσιτσιμπίκος Βαγγέλης (tsivagg)
data
eye 2
favorite 0
comment 0
Use this thingy to store your remote Mutant plate on the top bar of your printer.
Topics: Ender3, Wham_Bam_Mutant, thingiverse, mutant, 3D Printer Accessories, stl, Wham_Bam
3
3.0
Jan 6, 2021
01/21
by
Drake Snider (TriPunk)
data
eye 3
favorite 0
comment 0
a light strip holder to mount on 2020 extrusion of my CR-10s Pro. It should work on anything with a similar gantry.
Topics: stl, Led_Holder, led_strip, CR-10, led_mount, LED, thingiverse, Creality, Creality_CR-10, Ender3,...
4
4.0
Jan 5, 2021
01/21
by
Krzysztof Domoradzki (DaVinci2000)
data
eye 4
favorite 0
comment 0
Handle or grip for 2020 aluminium profile to carry over printer with ease and no pain from profile edges burying into finders. Print two identical halves and mount with M3x6 or M3x5 bolts and T-nuts. If you miss T-nuts print adapters for M3 nuts: https://www.thingiverse.com/thing:3050607 Print settings: * Filament: PETG, HIPS, alternatively PLA * Layer Height: 0.3 * Line Width: 0.45 * Wall Line Count: 2 * Top/Bottom Layers: 3 * Infill: 15% Check out my other designs:...
Topics: handle, grip, stl, creality_ender_3, 2020, Ender, 3D Printer Parts, Ender_3, 2020_extrusion,...
6
6.0
Mar 17, 2021
03/21
by
Brad Totaro (SafetyCaptain)
data
eye 6
favorite 0
comment 0
A twist in t nut , stl is a clockwise tnut, in the freecad file there is also a counter clockwise tnut. Use these as a base to build on!
Topics: freecad, Created_with_FreeCAD, 3D Printing, stl, tnut, thingiverse, Ender3
4
4.0
Jan 9, 2021
01/21
by
Kamil Stasik (kamilstasik)
data
eye 4
favorite 0
comment 0
Couldn't find a filament guide that would suit my needs, so I decided to make my own in Sketchup. It features a 608 bearing that makes sure the filament runs smoothly to the extruder. Bearing fits snugly but I recommend adding a screw and nut just to make sure. If there's something to improve please let me know, and also tips would be greatly appreciated.
Topics: thingiverse, 2020_extrusion, 2040, stl, filament_guide, 3D Printer Parts, creality_ender_3, Ender3,...
6
6.0
Mar 3, 2021
03/21
by
(Bobslee)
data
eye 6
favorite 0
comment 0
Since my filament kept sliding out of the loop due to my high retraction, I decided to modify it and move the opening in the loop to the other side. I use this 2020 connector, since the longer extrusions make it sturdier: https://www.thingiverse.com/thing:2994822.
Topics: thingiverse, 3D Printer Accessories, Ender3, stl
2
2.0
Jan 18, 2022
01/22
by
Mamadou BA (naedioba1)
data
eye 2
favorite 0
comment 0
This is designed for the Ender-3 Pro. https://youtu.be/S_tLH1NmqwE
Topics: Ender_3_Pro, LCD_Mount, creality_ender_3, Ender, christmas, thingiverse, christmas_ornament, lcd,...
3
3.0
Jun 10, 2021
06/21
by
James A (DiyProJames)
data
eye 3
favorite 0
comment 0
Tool Mount for 20mm rails. It works with CR10sPro. Ender 3. Fits all creality printers with 20mm rails. It fits the spatula, cutter, and hex keys that come with the printers. You do not need any support. Just print in the direction this print was saved. Leave a comment and let me know if it fits your rails. Thanks. Visit me on: youtube - https://www.youtube.com/diyprojames instagram - https://www.instagram.com/diyprojames/
Topics: 3D Printer Accessories, creality_ender_3, thingiverse, CR10S_PRO, tool_holder, Ender3, stl
2
2.0
Jan 18, 2022
01/22
by
Rohin P (rohinp)
data
eye 2
favorite 0
comment 0
**NOT TESTED BUT IT SHOULD WORK** Made to hold single or double 5mm width LED strip. Can also hold a single 10mm width LED strip. Angled 5° inwards to shine the light towards the print bed. 260mm overall LED length. Use tape backing of LED strip or other adhesive to attach. Press-fit this mount into the aluminum extrusion. For a single 5mm strip, use a thin COB LED strip (brighter than SMD LED, and diffused). https://www.aliexpress.com/item/1005002701379459.html (select 24v) For more details...
Topics: Creality, Ender, thingiverse, Ender_3, LED, stl, Led_Holder, 3D Printer Accessories, Ender3
1
1.0
Apr 19, 2022
04/22
by
Douglas Bowie (Kizan)
data
eye 1
favorite 0
comment 0
This is a RasPi 4 project box designed to fix on the end of a 20x20 rail. For my use with my Ender 3's it's either a front left or back right project box. The lid fits "ok" and has space for a 40mx10mm fan to tightly fit.
Topics: Ender, thingiverse, 3D Printer Accessories, Ender_3_Pro, creality_ender_3, stl, Ender3, Ender_3
1
1.0
Dec 13, 2021
12/21
by
Johan Jonsson (jojon80)
data
eye 1
favorite 0
comment 0
Plz read instruction before printing! If "download all files" isn't working download them one by one instead under "thing files". A really nice bird feeder that looks like a real house that I designed in solid works. A little bit different compared to all the other ones out there. This model consist of four parts. The bottom, the mid section with all the windows, the roof, and the chimney where you can fill the seeds. (i've used a cut off pet bottle to fill the seeds) No...
Topics: Ender, Ender5, Ender3, birdhouse, bird_feeder, ender_5, Models, stl, bird, Birds, thingiverse,...
