4
4.0
Jan 9, 2021
01/21
by
b_cfm (b_cfm)
data
eye 4
favorite 0
comment 0
***"32-30/70mm E3v2 SH"*** ***A 30mm by 70mm Spool Holder for Ender 3 v2*** --- First, I made the [73mm outer 32mm inner Ender 3 Spool Adapter SUNLU](https://www.thingiverse.com/thing:3416290) *by GrassRootz* Then, guess what, the Ender 3 v2 spool holder has an end piece with diameter of 36mm... I couldn't slide my spools. Furthermore, I think that default 90mm is too long to have a good balance, so I reduce length to 70mm. I designed this spool holder with a start diameter of 32mm +...
Topics: Ender3v2, thingiverse, ender3_v2, filament_spool_holder, stl, spool_mount, 3D Printer Parts,...
4
4.0
Mar 16, 2021
03/21
by
Martin STEFFEN (tiphedor)
data
eye 4
favorite 0
comment 0
To fit the all metal extuder (the red one) onto the MDD 1.3 from PrinterMods, with the stock cooling system.
Topics: mdd_v13, allmetal, thingiverse, printermods, Creality, Ender_3, Ender3, stl, 3D Printer Parts,...
4
4.0
Mar 15, 2021
03/21
by
Sven Erik Janz (xseven7)
data
eye 4
favorite 0
comment 0
Der Filamenthalter ist 12mm breiter als das Original somit passen auch Spuhlen mit 80mm breite darauf. Die Mutter geht etwas stram über der Seitenschneider Halter, mit etwas Kraft lässt sie sich gut darüber drehen. The filament holder is 12mm wider than the original, so spools 80mm wide also fit on it. The nut goes a little tight over the side cutter holder, with a little force it can be turned over it well.
Topics: ender3, thingiverse, filament, filament_holder, Creality, filament_spool_holder, Ender,...
4
4.0
Mar 15, 2021
03/21
by
Rafael Sandrini (rsandrini)
data
eye 4
favorite 0
comment 0
I did this split on .stl to be able to print in my ender 3 since was large than my print area. I uploaded two versions, one with 4 parts and another with 2 parts. I used the bottom with 4 parts and then I realize that I could print this in 2 parts, so I split the top part in two and worked well. Sending both versions to ensure that you can choose the better for you. I used LuBan (https://www.luban3d.com/) to split the parts, but I warn you that will be necessary some sanding in the connectors...
Topics: 3D Printing, bass, thingiverse, subwoofer, hexibox, Ender3, stl, hexibase
4
4.0
May 1, 2021
05/21
by
b_cfm (b_cfm)
data
eye 4
favorite 0
comment 0
***"Micro USB Fist Hanger"*** ***Connector Protection (Ender 3 v2)*** --- A simple mix of : *- [USB Cable Holder Fist](https://www.thingiverse.com/thing:4293411) by blackguest* *- [Ender 3 v2 USB Port Protector](https://www.thingiverse.com/thing:4567825) by MrWraith2* Thanks for their great job ! --- *Enjoy !*
Topics: stl, Ender3_USB, microusb_hole, Ender3v2, 3D Printer Parts, ender3_v2, thingiverse, ender3_upgrade
5
5.0
May 1, 2021
05/21
by
b_cfm (b_cfm)
data
eye 5
favorite 0
comment 0
***"Reversible Spool Holder"*** ***A fun 30mm by 70mm Spool Holder for Ender 3 v2*** --- Same as my previous design but threading at end makes it stronger and the spool is better blocked in the holder. Reversible property is useless by the way but fun ! --- *Enjoy !*
Topics: stl, Ender3_Spool_Adapter, ender_3_v2, ender_3_upgrade, Ender3v2, 3D Printer Accessories,...
3
3.0
Jun 11, 2021
06/21
by
(squirrelf)
data
eye 3
favorite 0
comment 0
Please consider donating if you find it useful (use the buy me a coffee at the bottom or "tip designer" button), thank you! two options: - one with an extra vertical support that slides on the side Y beam. not sure if needed but I made it anyway. it will keep the motor elevated, not touching the side Y beam, uses 2x m4 screws and nuts. (slots in the support part are for the m4 nuts). The initial idea behind it was to use it as a way to do minor vertical alignment adjustment, for...
Topics: Creality, creality_ender_3, Ender_3, ender_3_dual_z, t_nut, dual_z_axis, Dual_Z_Axis_Ender_3, 3D...
5
5.0
May 1, 2021
05/21
by
mr pink (pengupanda)
data
eye 5
favorite 0
comment 0
made the spool and holder fit up to 100mm spools.
Topics: stl, spool_holder, Ender3, filament_spool_holder, Ender3v2, 3D Printer Accessories, thingiverse
2
2.0
Jan 18, 2022
01/22
by
Joseph Gonzalez (Another_averagejoe)
data
eye 2
favorite 0
comment 0
My cell phone needed a little bump up to get a better viewing angle so I made this little spacer since I couldn't find one already Added a 4 bolt as well
Topics: thingiverse, ender3pro, 2020extrusion, Ender3v2, 2020_extrusion, stl, 3D Printer Parts, Ender3
2
2.0
Nov 30, 2021
11/21
by
Τσιτσιμπίκος Βαγγέλης (tsivagg)
data
eye 2
favorite 0
comment 0
Use this thingy to store your remote Mutant plate on the top bar of your printer.
Topics: Ender3, Wham_Bam_Mutant, thingiverse, mutant, 3D Printer Accessories, stl, Wham_Bam
4
4.0
Jan 9, 2021
01/21
by
Kamil Stasik (kamilstasik)
data
eye 4
favorite 0
comment 0
Couldn't find a filament guide that would suit my needs, so I decided to make my own in Sketchup. It features a 608 bearing that makes sure the filament runs smoothly to the extruder. Bearing fits snugly but I recommend adding a screw and nut just to make sure. If there's something to improve please let me know, and also tips would be greatly appreciated.
Topics: thingiverse, 2020_extrusion, 2040, stl, filament_guide, 3D Printer Parts, creality_ender_3, Ender3,...
2
2.0
Jan 18, 2022
01/22
by
Mamadou BA (naedioba1)
data
eye 2
favorite 0
comment 0
This is designed for the Ender-3 Pro. https://youtu.be/S_tLH1NmqwE
Topics: Ender_3_Pro, LCD_Mount, creality_ender_3, Ender, christmas, thingiverse, christmas_ornament, lcd,...
2
2.0
Jan 18, 2022
01/22
by
Rohin P (rohinp)
data
eye 2
favorite 0
comment 0
**NOT TESTED BUT IT SHOULD WORK** Made to hold single or double 5mm width LED strip. Can also hold a single 10mm width LED strip. Angled 5° inwards to shine the light towards the print bed. 260mm overall LED length. Use tape backing of LED strip or other adhesive to attach. Press-fit this mount into the aluminum extrusion. For a single 5mm strip, use a thin COB LED strip (brighter than SMD LED, and diffused). https://www.aliexpress.com/item/1005002701379459.html (select 24v) For more details...
Topics: Creality, Ender, thingiverse, Ender_3, LED, stl, Led_Holder, 3D Printer Accessories, Ender3
1
1.0
Dec 13, 2021
12/21
by
Johan Jonsson (jojon80)
data
eye 1
favorite 0
comment 0
Plz read instruction before printing! If "download all files" isn't working download them one by one instead under "thing files". A really nice bird feeder that looks like a real house that I designed in solid works. A little bit different compared to all the other ones out there. This model consist of four parts. The bottom, the mid section with all the windows, the roof, and the chimney where you can fill the seeds. (i've used a cut off pet bottle to fill the seeds) No...
Topics: Ender, Ender5, Ender3, birdhouse, bird_feeder, ender_5, Models, stl, bird, Birds, thingiverse,...
4
4.0
May 1, 2021
05/21
by
Alexandre Rodmann Guiss (aleguiss)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:4636707 was designed to use 20mm springs, so I expanded the feet to fit 25mm ones. Just print 4 of each file. Silicone feet not required, but nice to have!
Topics: stl, Vibration_dampening, creality_ender_3, Ender3, yellow_springs, Ender_3, upgrade, 3D Printer...
3
3.0
May 1, 2021
05/21
by
Patric Buehr (PapaX2819)
data
eye 3
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, Ender, spool_holder, Ender3, filament_spool_holder, Ender_3, spoolholder, 3D Printer Parts,...
4
4.0
Mar 15, 2021
03/21
by
Adrian West (The_West_Lab)
data
eye 4
favorite 0
comment 0
This is a simple desk organizer for all of the tools and supplies I use regularly for bed preparation, changing filament, and coarse post-processing of prints. It doesn't have room for every single tool, for every single maintenance task - just the important things that always seem to funk up my workspace, or are dangerous if left lying within reach of toddlers and pets! The organizer is designed to hold: 2 x 250 mL wash bottles (58 mm diameter) for IPA and ddH2O 1 x box Kimwipes 4 x glue...
Topics: thingiverse, organization, Desk_organizer, organizer, bed, Ender3, Ender_3, creality_ender_3,...
2
2.0
Aug 22, 2021
08/21
by
Anoop K R (anoopkr)
data
eye 2
favorite 0
comment 0
The part is designed as a general hook for the 4040 profile with M5x16 bolts (just because I had them lying around) and M5 T-nuts. Designed in Fusion 360. No support is required to print. Dimensions are provided in the images so that you can add a custom dovetail to your part to be mounted. I am also adding the raspberry pi 4 case (base part) separately for reference. {Note: I gave a tolerance of 0.2mm between my Pi case and this mount, which was a little bit on the loose side.} Using it to...
Topics: 3D Printer Accessories, creality_ender_3, octoprint_accessories, Raspberry_Pi, 3D_Printer_Parts,...
4
4.0
Mar 15, 2021
03/21
by
Guilherme Nobrega (gna13495)
data
eye 4
favorite 0
comment 0
-- ENGLISH First of all, I made this to learn Arduino, there is another ways to have the same results for your printer. 3DPInfo - A display made to keep you up with your printer status, showing informations about your filament. Description on images. The Arduino circuit picture is missing one temperature sensor, just replicate the scheme, I installed the other sensor inside my filament dry box. SD card reader and temperature sensor doesn't need the resistor. To control screen brightness use a...
Topics: temperature, thingiverse, arduino, 3dpinfo, extruder, Ender_3, creality_ender_3, Ender3, stl,...
4
4.0
May 1, 2021
05/21
by
above ego (APEgo)
data
eye 4
favorite 0
comment 0
-this is bisiness card idea for represent your 3d printing comission ,i try to design in minimal concept. -you can modify logoname, contect name and other in master solid works file. -have a good print!!!!
Topics: stl, Signs & Logos, card, Ender3, business_card, modify, diy, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Dan (ubergeeknz)
data
eye 4
favorite 0
comment 0
Want to use the Hero Me Gen. 5 system but with your 40mm axial fans? I did, and so I designed an adapter to use 40mm Axial fans with the 4020 radial nozzle (4020_Dual_Radial_Fans_Dual_Ducts is the one I used, should work for single duct as well or other types of nozzle which use a 4020 radial fan) There's a left and a right version, accordingly. They're mirror images. You'll need supports from the build plate for the mounting ears. The rest of it should print fine without support. The holes in...
Topics: Noctua_Fan_40mm, Herome_gen5, thingiverse, 40mm, Axial, fan_adapter, hero_me, Ender3, stl, 3D...
3
3.0
May 1, 2021
05/21
by
Alan Cortizo (Acortizo)
data
eye 3
favorite 0
comment 0
Adapter to bolt 40mm fan as replacement for 60mm fan or viceversa
Topics: stl, Ender3, thingiverse, power_supply, PSU, Ender_3, 60mm, fan, 3D Printer Accessories, 40mm
3
3.0
Aug 9, 2021
08/21
by
Kamino KGY (KaminoKGY)
data
eye 3
favorite 0
comment 0
Here is the video about the project to print 5 colors with the Ender 3: https://youtu.be/filE_a6XXpo
Topics: Multicolor, thingiverse, Ender_3, 3D Printer Parts, mmu, creality_ender_3, Ender3, stl
Some old friends of JB join Alex to discuss 3D printing.Special Guests: chzbacon and Drew DeVore.Sponsored By:Linode: Receive a $100 60-day credit towards your new account. Promo Code: linode.com/sshSupport Self-HostedLinks:Octoprint — The snappy web interface for your 3D printer.Thingiverse — A collection of freely available 3d models to print out.Prusa Research — Maker of the Prusa 3d printers.Ender 3 — The Creality Ender 3 is one of the cheapest ways to get started with 3d...
Topics: Podcast, Self-Hosting, DIY, Linux, open source, encryption, privacy, on premise, hybrid cloud,...
3
3.0
Oct 14, 2021
10/21
by
Giri Santi (TontoTraveler)
data
eye 3
favorite 0
comment 0
Let me first give credit to the designs that inspired mine. I drew this one from scratch but I originally liked the idea from TerraVestra's design (https://www.thingiverse.com/thing:4548187) as well as CyberwareDK's remix (https://www.thingiverse.com/thing:4601320). In fact, I originally remixed that design myself, (https://www.thingiverse.com/thing:4830172) but this one is a new creation. **Why the change?** -------------------------- The original concept had to be printed with lots of...
Topics: cover, Ender3, power_supply_cover, ender_3_v2, 3D Printer Parts, quieter, Voxelab_aquila,...
4
4.0
Jan 16, 2021
01/21
by
Dovydas Cesna (Omdoyas)
data
eye 4
favorite 0
comment 0
I adjusted the openings for the fans to fit noctua 40mm fans, as they have sharper corners. I also added mounting holes for securing the fans with M3 screws.
Topics: hotend_cooling, Petsfang, fan_duct, fan, herome, hotend, thingiverse, Ender3, creality_ender_3,...
4
4.0
Mar 15, 2021
03/21
by
Andrey Tsapov (atsapov)
data
eye 4
favorite 0
comment 0
I have decided to upgrade my hotend to Trianglelab CR10 heatsink ALL METAL Hotend (https://www.aliexpress.com/item/32909386487.html?spm=a2g0s.9042311.0.0.6afe4c4dQbM199). I had to re-design the fan duct to fit the new heatsink demensions. I am hoping to print nylon with it (wish me luck as I have some concerns on the properly chosen hotend set up. May need to go with another hotend after I try this one - another remake duct to go=)))). Once installed, I will post the working model. So far still...
Topics: fanduct, thingiverse, Ender3, Fan_mount, fan_duct, cooling_fan, stl, 3D Printer Parts, 40mm_fan,...
5
5.0
May 1, 2021
05/21
by
Antoine Waikiki (WaikikiProd)
data
eye 5
favorite 0
comment 0
_____________________________________________________________________ Français (description in English below) _____________________________________________________________________ Dérouleur de bobines de filaments universel avec roulements à billes, plus silencieux avec un bon déroulement sans inertie (pas de déroulement intempestif). Test Bobines inférieures ou égales à 3,5kg validé Imprimer à plat : -2x ChassisINT -2x ChassisEXT -4x Roue 4 roulements à billes 8 mm x 22 mm x 7 mm...
Topics: universal_stand, geeetech_A20M, neofil3d, prinsfil, cr6se, flashforge_finder, CR6-SE, pla_filament,...
3
3.0
May 1, 2021
05/21
by
Ammar Faridi (ammaryasir)
data
eye 3
favorite 0
comment 0
Maximum visibility for hot end. 5015 and 4010 fan ducts One piece stock screws
Topics: stl, Ender, creality_ender_3, Ender3, 4010_blower, 5015_fang, Creality, Ender_3, 3D Printer Parts,...
4
4.0
Mar 15, 2021
03/21
by
Ammar Faridi (ammaryasir)
data
eye 4
favorite 0
comment 0
AYF minimal duct for 5015 fan needs now M4 screw for 5015 fan rest M3 stock will work
Topics: 5015_fang, thingiverse, 5015, 5015_blower, 5015_fan_duct, Ender3, Creality, creality_ender_2,...
4
4.0
Mar 15, 2021
03/21
by
Ammar Faridi (ammaryasir)
data
eye 4
favorite 0
comment 0
5015 Single duct for CR-10
Topics: 5015_fang, fanduct, thingiverse, 5015, 5015_blower, 5015_fan_duct, Ender3, Creality, duct, Ender_3,...
3
3.0
Oct 15, 2021
10/21
by
Victor Alvarez (shokerman)
data
eye 3
favorite 0
comment 0
Este es un adaptador para la bobina de filamento PLA de la marca Sunlu, que como saben viene bastante amplio en el centro (7 cm) y cuando la impresora lo consume provoca que quede en un movimiento de péndulo que afecta la impresión por el movimiento, además de que estresa al extrusor ya que necesita mas fuerza para jalar el filamento por el peso de la bobina al tener un centro de gravedad mas bajo. Ya que todos los que encontré requerían de ensamble con tornillos, tubos o rodamientos,...
Topics: thingiverse, sunlu, stl, soporte, 3D Printer Accessories, Ender3, sunlu_filament, Ender, Ender_3,...
5
5.0
Mar 16, 2021
03/21
by
Patric Buehr (PapaX2819)
data
eye 5
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: 3D Printing, thingiverse, adapter, Ender3, stl
3
3.0
Jun 11, 2021
06/21
by
Kevin (yaikou)
data
eye 3
favorite 0
comment 0
I wanted to reclaim space on my X-Axis, so I figured a 40mm BL Touch fan mount was needed. However, after a few iterations of a static mount, I felt it pertinent to redesign it from the ground up so there was at least some level (no pun intended) of Z-Axis adjustment. I printed with ASA, but you can use PLA. The design was created in a way to reduce supports needed, though YMMV. Printing: 1. Spacer isn't necessary, but I'd recommend printing it at the same time a. due to the proximity of the BL...
Topics: Ender5, Adjustable, 40mm, 3D Printer Parts, thingiverse, ender5pro, BLTouch, Ender3, stl
2
2.0
Aug 9, 2021
08/21
by
LZ Printing (LZ3D)
data
eye 2
favorite 0
comment 0
A simple adjustable BL Touch mount for Ender 3 Max. Found the other mounts on thingiverse made my bl touch too near to the nozzle which occasionally hits my print. Already broke one needle, not gonna break another. Print it laying flat with any material you like. PLA works okay but i printed mine in ABS cause I was too lazy to change filaments Offsets: x: +47 y: -8 z: 0.5 (for mine, adjust yours accordingly) Prints in 17 minutes :D Provided SDLPRT if you need to edit anything Have fun and keep...
Topics: BLTouch, thingiverse, 3D Printer Accessories, Ender3Max, Ender3, stl
4
4.0
Jun 10, 2021
06/21
by
Sebastiaan Dammann (Sebazzz)
data
eye 4
favorite 0
comment 0
A touch screen stand so your DWIN touch screen may stand alone from the printer itself. I printed this because I have a CR-6 DWIN touch screen on my [Creality CR-10 Smart with BTT SKR board](https://damsteen.nl/blog/2021/04/25/creality-cr10-smartening-up-with-btt-skr-cr6-motherboard) and I like the touch screen better when it is separate from the printer. Features: - Stand is adjustable - There is an extrusion to allow easy firmware updating using a microSD card (well... [easy, with a DWIN...
Topics: 3D Printer Accessories, thingiverse, cr6se, Ender3v2, dwin, Ender3, stl
4
4.0
Mar 15, 2021
03/21
by
Household Maker (householdmaker)
data
eye 4
favorite 0
comment 0
This design is approximate recreation of design made by [ross_k](https://www.thingiverse.com/ross_k/designs) https://www.thingiverse.com/thing:2752080 https://www.thingiverse.com/ross_k/designs and his uploaded file: Ender_Z-Axis_Motor_Mount.stl This is not the long screws version. I have recreated it because I needed a design with better options for customizing. Mainly I needed thinner spacer than 0.5 mm. What's more community could benefit from releasing complete design so everyone can...
Topics: Ender3v2, thingiverse, upgrade_ender3, Ender_3, creality_ender_3, Ender3, stl, 3D Printer Parts,...
5
5.0
May 1, 2021
05/21
by
Rafael Oliveira (Rafoliver_Official)
data
eye 5
favorite 0
comment 0
This is a adjustable leveling feet for machines that use 2040/4040 aluminium extrusions as frame. This was designed for a CR10 style machine that stays in an uneven floor. Will serve any commercial printers that are builded in 2040/4040 configuration. Printed on a ender 3. PLA Volcano 0.6mm Nozzle 0.16mm Layer Height 30% infill 4 shell lines No supports Coasting enabled Adaptative Layers I hope this serves you. :)
Topics: stl, ender3_feet, 2040_v_slot, Tronxy, tornado, Adjustable_Feet, 2040_extrusion, printer_feet,...
4
4.0
May 1, 2021
05/21
by
Rudi Strydom (rudis1261)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:4614384 Remix using captive nuts instead of heat inserts. And added BLTouch mount. With spacers in-case your sensor doesn't trigger.
Topics: stl, ender3, ender3pro, mount, 3D Printer Parts, thingiverse, afterburner
3
3.0
Jun 11, 2021
06/21
by
Josh Kay (MrBuild)
data
eye 3
favorite 0
comment 0
Parts for an Arduino-based alarm clock.
Topics: creality_ender_3, Ender_3, MadeWithTinkercad, TinkerCAD, thingiverse, Other, Ender3, stl
3
3.0
Nov 8, 2021
11/21
by
Brendan BT (b_render)
data
eye 3
favorite 0
comment 0
I remixed the zip tie mount because I wanted to personalize my printer and the original pieces connection goes on and off so nicely so it just makes sense.
Topics: stl, 3dprinter, 3D Printer Accessories, ender3, thingiverse, 2020, accessory
2
2.0
Dec 1, 2021
12/21
by
Matt Appleton (tatersalad1999)
data
eye 2
favorite 0
comment 0
Got tired of having to use my phone to do things on my printer while using Octoprint. Kids had an old Amazon Fire 7 that they hadn't used in years. Put Google play store on it and downloaded the OctoRemote App. Now I have dedicated touchscreen control for my Ender3. This mount was designed to work with the 4th generation Amazon Kindle Fire 7. This snaps into the top 20x20 extrusion. I did use a little mounting tap to just get a little tighter fit.
Topics: Ender3, Amazon, amazon_fire, Octoprint, thingiverse, Raspberry_Pi, stl, 3D Printer Parts
2
2.0
Dec 14, 2021
12/21
by
Андрей Макеев (Dr_Grapes)
data
eye 2
favorite 0
comment 0
Another version of MGN15H upgrade kit for Ender3. Lightest version of conversion i presume. you will need this little part list: 1 - M5x30 2pcs 2 - M5x20 1pcs 3 - M5 nut 3pcs 4 - M3x8 12pcs 5 - T-nut M3 12pcs (or ordinary nuts with V-slot shell) And maybe some washers. And, ofcourse, printed parts.
Topics: MGN15H, upgrade_ender3, Ender3, stl, thingiverse, 3D Printer Parts
4
4.0
Mar 15, 2021
03/21
by
Daan de Willigen (daandw94)
data
eye 4
favorite 0
comment 0
A Pi Cam v1.3 holder for the Y axis. Was looking for something like this, could not find it. It goes into the v slot on the bottom and snaps onto the metal part that holds the roller for the belt. It is supposed to bend a little at the bottom where it connects to the printer, so it is flexible enough to overcome all differences in printers. There is enough clearance for the bed to go all the way. Also sturdy enough to not really notice vibrations. Last picture is PoV. Hardware needed: 1x...
Topics: thingiverse, 3D Printer Accessories, mount, raspberry_pi_camera, Ender_3, creality_ender_3, Ender3,...
5
5.0
May 1, 2021
05/21
by
James May (madwrench)
data
eye 5
favorite 0
comment 0
similar to my other ps relocate (https://www.thingiverse.com/thing:4816227) except with the cord and switch facing rearward instead of the side.
Topics: stl, Ender_3_Pro, creality_ender_3, Ender3, power_supply, Ender_3, relocate, thingiverse, 3D...
4
4.0
May 1, 2021
05/21
by
Axel Kiersten (xl_bk)
data
eye 4
favorite 0
comment 0
As I put a light on back side of the x-axis, I was looking for a Raspberry Pi Cam holder for the backside of the printer. I could not find a easy to print holder, so created a mount for the screws of the power supply. A M4 screw and a nut is required. Case is for following Camera: https://www.amazon.de/gp/product/B07CMXJLXR/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Topics: stl, Ender3, Raspberry_pi_3, Raspberry_Pi, raspberry_pi_camera, 3D Printer Accessories, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Beau Dwyer (Wob76)
data
eye 4
favorite 0
comment 0
I have been using these cheap "Whites 50 x 50 x 12mm Anti Vibration Squares" from hammerbarn (Bunnings) for a few months to help isolate the fan noise from my enclosure\desk, I just had my printer sitting on them but it was a pain when moving the printer, I found a heap of feet but nothing to match the 50x50 squares and I didn't want to cut them up. With my prints these fit snug in the slots without needing to ram them in, they don't move on there own once in place. Hopefully anyone...
Topics: thingiverse, Ender_3, Ender, Ender3, stl, Ender_3_Pro, 4040_extrusion, 4040, 3D Printer Accessories
4
4.0
May 1, 2021
05/21
by
(foureight84)
data
eye 4
favorite 0
comment 0
I did not include an extruder mount in the design since I am trying to reduce the weight on the gantry as well as the Z Axis. My extruder has been moved to the top using this piece: https://www.thingiverse.com/thing:3248350 The idea behind this is to get rid of the wheels on the Mega Zero (should work with Ender 3 as well) for the Z-axis and use LM8UU bearings and rods instead. The linear rods will be sitting to the side of the motors held in place by the motor mounts and top end-caps that also...
Topics: stl, creality_ender_3, Ender3, DIY, Ender_3, Anycubic, anycubic_mega_zero, thingiverse
3
3.0
May 1, 2021
05/21
by
Michele Dicati (michele_dicati)
data
eye 3
favorite 0
comment 0
This tool is what you need to test if your axis have 90° angle.
Topics: stl, calibration, Ender3, 3D Printing Tests, axis, thingiverse
3
3.0
Jun 21, 2021
06/21
by
Daniel Luu (cpxazn)
data
eye 3
favorite 0
comment 0
This was designed to eliminate threads catching when stowing/deploying. It uses a short M3 screw, either 6mm or 10mm, which screws into the probe extender. Instruction for Ender 3 v2 https://www.reddit.com/r/ender3v2/comments/nxm865/guide_for_bfptouch_on_ender_3_v2/
Topics: creality_ender_3, thingiverse, 3D Printer Accessories, Ender3, BFPTouch, stl, BLTouch, Ender,...
