0
0.0
Aug 13, 2022
08/22
by
maker 4fun (maker4fun)
data
eye 0
favorite 0
comment 0
I always wanted sth to shut my printer down after long prints, especially if I leave it running over night. I did get the inspiration from Swarti's design, but I made erverything from scratch. I even rebuild my own front switch completely to make it sturdier and with better grip. #Advantages of my design * no use of octoprint * no smart-plug required * disconnects the printer completely from power (phase and neutral are disconnected; better than original switch) * no complicated using of free...
Topics: Auto_shutdown, Voxelab_aquila, Ender_3_Pro, ender_3_v2, auto_power_off, Aquila, power_switch,...
4
4.0
Jan 6, 2021
01/21
by
Morten Petersen (CyberwareDK)
data
eye 4
favorite 0
comment 0
Remix of another cover, but made for a bigger fan 80x80x25 since they are more silent than the slim fan. This will require you to raise the printer. I made these legs for my Ender 3 v2. https://www.thingiverse.com/thing:4603075 The fan I used was the Arctic F8: https://www.amazon.com/ARCTIC-Silent-Ultra-Quiet-inaudible-Configuration/dp/B0119SLG18/ but any 80x80x25 will work :)
Topics: Ender3v2, stl, PSU_Cover, creality_ender_3, fan, silent_fan, 3D Printer Parts, Ender 3,...
3
3.0
Jan 6, 2021
01/21
by
Saara Van Rijzeghem (SaaraVanR)
data
eye 3
favorite 0
comment 0
I was looking foor a SD card holder to fit on my Ender 3v2 but i dit not found something i liked. So i created something that should fit in the place where the end cap is. It fits perfectly in the foor holes.
Topics: stl, micro_SD, End Cap, thingiverse, 3D Printer Accessories, Ender 3v2
3
3.0
Jan 6, 2021
01/21
by
Adam Lambert (Veshraine)
data
eye 3
favorite 0
comment 0
I found that if you have to remove the end caps for any reason they are easy to break if not careful, so I decided to recreate them in fusion 360 to be an exact fit so they can be printed in any color of your choice and if you so choose you can emboss text or images on the surfaces.
Topics: stl, Ender3V2, 3D Printer Parts, Ender, ender3 v2, thingiverse, ender 3 v2, ender 3v2
4
4.0
Jan 8, 2021
01/21
by
Maker Smith (MakerSmitty)
data
eye 4
favorite 0
comment 0
This is based on the fang duct by The_Benz_Master. Uses 2 Sunon MF40202V2-1000U-A99 40x20mm fans. I printed this out of PLA. You have to use 6 M3x25 bolts and 2 M3x22 to mount the fans. I ran an M3 tap through the mounting holes to attach the fans. The main body can be printed without supports, but the covers should be printed with supports. You'll also have to solder the wires to the existing fan wiring after removing the stock cover and fans. I modelled this in Fusion 360. Source files are...
Topics: Fan Duct, stl, 3D Printer Parts, Ender, Ender 3, Fang, thingiverse, Ender 3V2
4
4.0
Jan 9, 2021
01/21
by
Michael Mills (michaelmills09)
data
eye 4
favorite 0
comment 0
I remixed this to have different spacer thicknesses at 0.75mm, 1mm, 1.25mm and 1.5mm. The 0.5mm is already created, so if you need that it is what I based the remix off. That was from @Ross_k thing:2752080.
Topics: thingiverse, stl, Ender_3v2, zmotor, 3D Printer Parts, Ender_3, shim, spacer, ender
2
2.0
Oct 30, 2021
10/21
by
Business User (BusinessUser)
data
eye 2
favorite 0
comment 0
Whew. Well, I've finally done it, thank bujeezus I have an extra printer to make this. This is a working replica of the tensioner housing (not the inner tensioner, just the outer shell that surrounds it). I dropped my Ender 3 v2 on the floor like a potato, so I thought I'd punish myself by painstakingly measuring the broken one with a caliper and re-creating it in TinkerCAD. I thought when they say to try power cycling it, it meant drop on floor aggressively? Well, there ya go folks! Hope the...
Topics: thingiverse, Ender_3, Ender3v2, 3D Printer Parts, stl, Ender_3v2, Creality_Ender_3V2
1
1.0
Apr 19, 2022
04/22
by
diego silva (MartyFierro)
data
eye 1
favorite 0
comment 0
Wire holder slider for Creality printers when you have direct drive easy print, turn up the fill on the bolts.
Topics: thingiverse, Ender_3v2, 3D Printer Accessories, creality_ender_3, stl, wire_management, Ender_3
3
3.0
May 1, 2021
05/21
by
Jetel Diraipas (Jetel73)
data
eye 3
favorite 0
comment 0
Hello, You just need a little washer to fix this annoying pneumatic locker. It is easy to dismantle the lock, insert the washer behind the o'ring to increase the grip, reassemble and firmly reengage the bowden tube in place. Here is a tutorial illustrated to follow the steps. It is in french, use Google translator module if necessary. Enjoy !
Topics: stl, locker, Ender_3, Ender 3v2, Pneumatic lock, 3D Printer Accessories, thingiverse
3
3.0
Jun 11, 2021
06/21
by
pedro Celso Inacio (PCPAI)
data
eye 3
favorite 0
comment 0
A mix of the Ender 3 v2 dial gauge holder and Laser plate for Ender 3 V2 from Eli Liu on https://forums.creality3dofficial.com/download/3d-models/ compatible bl-touch
Topics: ender_3_v2, thingiverse, Ender_3v2, 3D Printer Accessories, stl
4
4.0
Mar 15, 2021
03/21
by
Wood Cat (Woodcat64)
data
eye 4
favorite 0
comment 0
Remix to keep both the bed and gantry cables away from rubbing or getting caught on the PSU. Works best with low socket or button socket head M5 screws. This is part of my attempt for better cable management of the Ender3 V2 https://www.thingiverse.com/thing:4761365 https://www.thingiverse.com/thing:4769940
Topics: Ender_3v2, thingiverse, cable_guide, Creality_Ender_3V2, ender_3_v2, stl, 3D Printer Parts,...
4
4.0
May 1, 2021
05/21
by
Douglas LeRoy (GeoStork)
data
eye 4
favorite 0
comment 0
The Ender 3 v2 has the power supply mounted to the bottom of the unit. The squash ball mount file that I "remixed" this from was too large for Tinkercad so I whipped up this set of shims. For the feet that mount at the rear of the unit, use the two shims that are "L" shaped. The other two are provided for those (like me) who felt bothered by the fact that the rear of the unit would sit 1mm higher than the front. LOL.
Topics: stl, Vibration_dampening, ender_3_v2, Ender_3v2, anti_vibration, 3D Printer Accessories, spacer,...
2
2.0
Apr 19, 2022
04/22
by
Emiro Guerrero (emguepo)
data
eye 2
favorite 0
comment 0
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
Topics: thingiverse, ender 3v2, CR6-SE, fusion_360, 3D Printer Accessories, Creality_CR6-SE, Ender_3_Pro,...
1
1.0
Apr 20, 2022
04/22
by
K2 Kevin (K2DesignLab)
data
eye 1
favorite 0
comment 0
Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for release. PLEASE POST YOUR MAKES! P R I N T S: - K2 Satsana Dual Fan Duct - Wire Hide press fit L-cover (Top) - Fan grills (Optional) F E A T U R E S: - Stock Fan size 4010 Fans (Link below) - Dual Parts Fan Ducting - CRTouch/BLTouch Mount (reinforced) - Mounting...
Topics: thingiverse, Stock Fans, Ender 3v2, Satsana Grill, Satsana, Dual Fan Duct, 3D Printer Extruders,...
5
5.0
Mar 15, 2021
03/21
by
Wood Cat (Woodcat64)
data
eye 5
favorite 0
comment 0
Cover over PSU wire terminal. Needed after removing Creality guard, which was blocking PSU air vents. This is part of my attempt for better cable management of the Ender3 V2 https://www.thingiverse.com/thing:4761365 https://www.thingiverse.com/thing:4768402
Topics: Ender_3v2, Ender3v2, thingiverse, Creality_Ender_3V2, ender_3_v2, stl, 3D Printer Parts
4
4.0
Mar 15, 2021
03/21
by
Wood Cat (Woodcat64)
data
eye 4
favorite 0
comment 0
A guard over the PSU wire terminal .
Topics: Ender_3v2, Ender3v2, thingiverse, Creality_Ender_3V2, ender_3_v2, stl, 3D Printer Parts
5
5.0
May 1, 2021
05/21
by
Sam Harford (KingSam1st)
data
eye 5
favorite 0
comment 0
Important Please Read! The vid has assembly instructions (The hovering gear and mount is *duh* Where the stepper goes) every part except stepper is printed If you do not want to buy a new stepper, Use the stepper from your Extruder (Gear Part) cos u don't need it for this. u can always re-attach later You can print things that are pastes *duh*... like clay, thick cookie dough. stuff like that I can't be bothered writing things at the moment. I will do a proper desc after I have tested... Post...
Topics: school, fully_printable, pizza sause, wow, ice cream, Nema, Test, Smush, printer_calibration, x...
3
3.0
Jun 11, 2021
06/21
by
pedro Celso Inacio (PCPAI)
data
eye 3
favorite 0
comment 0
this work in progress is a mix of https://www.thingiverse.com/thing:4559133 and https://www.thingiverse.com/thing:4545252 as I have the bl-touch original plate installed so I had to adapt the pen holder
Topics: Pen_Plotter_Holder, thingiverse, Creality_Ender_3V2, 3D Printer Accessories, stl
4
4.0
Jun 10, 2021
06/21
by
Dan Joerr (JanD_204)
data
eye 4
favorite 0
comment 0
This is a simple replacement part for the Ender 3 V2 (V1?). There is a small difference in comparison to the original part. The "knob" is a little longer, so that the nozzle is higher above the hotbed. The reason is that my springs for the hotbed are much longer than the original and i needed more clearence for bedleveling. I printed at: - 0.2mm layer height - 30-40% infill (?) - 3 Perimeters - "DAS Filament" PLA, but PETG should be fine.. YOU PROBABLY NEED TO SCALE ABOUT...
Topics: Ender_3, ender_3_v2, replacement, 3D Printer Parts, thingiverse, Ender_3v2, stl
3
3.0
Jan 19, 2022
01/22
by
Vincent Commandeur (vcom)
data
eye 3
favorite 0
comment 0
Remixed the Ender 3 Max dual z height sync spacer from scratch to fit the Ender 3V2. So basically I took the idea and made a new version to fit my needs. Clears the endstop nicely. You need to print two.
Topics: spacer, thingiverse, level, Ender 3v2, x-axis, z-axis, Ender_3, stl, 3D Printer Accessories, dual z
0
0.0
Aug 14, 2022
08/22
by
Ro Ma (romamz)
data
eye 0
favorite 0
comment 0
v1 (don't use for Ender 3v2) [v2](https://www.thingiverse.com/download:11779692) (works, but maybe not the finest design) My first try with meshmixer kinda failed, now i tried tinkercad (ez pz lemon squeezy) [v1 test result] - I need to make a hole for a screw that's on the backside of the hotend-plate - the receiving end on top needs to be more to the side, because in the center it gets in the way with the z-axis [v2 test result] - it does work - but I am not perfectly happy with the result...
Topics: 3D Printer Accessories, chain, ender 3v2, Ender_3, stl, thingiverse, holder, dragchain, cable
0
0.0
Aug 15, 2022
08/22
by
Penitent Hollow (PenitentHollow)
data
eye 0
favorite 0
comment 0
I want to start by saying that this is not an improvement to the filament path and may actually raise issues for you but if you are more concerned with saving space, I got you. You will need a filament guide before the extruder but that does not guarantee flawless performance and I would have some kind of desk-top back up handy for troublesome spools and filaments. I have found that even the first 100g of a new spool may be at risk for tangling. You should also load the spool so that the...
Topics: 3D Printer Accessories, spool_holder, left_side_mounting, ender_3_v2, creality_ender_3_v2,...
1
1.0
Apr 20, 2022
04/22
by
anthony reffelt (anmire)
data
eye 1
favorite 0
comment 0
This is a universal-fit spool holder that attaches directly into the original Ender 3 V2 spool holder bracket, with option supports and no external components! The thread is a 1 inch thread and has 3 start locations for the cones to slide along, and then tighten at various distances for different effects. If you tighten the spool between the two "cones", then the entire spool & holder assembly will rotate within the holder bracket. If you rest the spool on both cones but don't...
Topics: Spool, screw, Universal_spool, filament_spool_holder, easy_print, stl, Creality_ender_3_v2,...
3
3.0
Jan 19, 2022
01/22
by
David Ruff (DAR01)
data
eye 3
favorite 0
comment 0
Made just for the fun of it. This is a simplified model [loosely] based on an Ender 3 v2 to be used as a desktop organiser or tool caddy for the true 3D printing fanboi! Can be scaled as required in your slicer to suit your needs.
Topics: 3d_printer, simplified, Ender, model, thingiverse, tool_holder, Ender 3v2, Ender_3, Desk_organizer,...
3
3.0
Apr 1, 2021
04/21
by
Simon Love (enly1)
data
eye 3
favorite 0
comment 0
**TINMORRY FILAMENT SPOOL ADAPTER - 31/54** Customised using openSCAD as thingiverse is just plain broken. This is a customised print for a loose fit on a standard ender 3v2 spool holder, but nice and tight in the Tinmorry spool. > **IMPORTANT NOTE:** Due to the design of the spindle on the v2, you cannot simply slide these on !!!! > > To make these work, I cut the end off the back of the tube at the cuff. I drilled a single hole through the tube to allow me to fit a split pin or...
Topics: creality_ender_3, Ender_3, thingiverse, spool_adapter, adapter, 3D Printer Parts, ender 3v2,...
4
4.0
Mar 15, 2021
03/21
by
Tommy Christiansen (Sympotonic)
data
eye 4
favorite 0
comment 0
If you can use the print, please feel free to add a tip I spent tons of hours and material to get it right in the sweet spot =) I will appreciate it. This is a remix from Zenith77 Tool Holder. I saw some possibilities in his design to make a topshelf, for our loose stuff we keep around the printer, like glue stick, nozzles, tools etc. And i must say, this combined with my Bottom Tool Holder you can find under my designs, its a perfect match! I made the shelf to fit exactly from outside the...
Topics: Frame rail, thingiverse, Ender_3, Ender 3v2, stl, Mount, Shelf, 3D Printer Accessories
4
4.0
Mar 15, 2021
03/21
by
Robert Makes (robertd33)
data
eye 4
favorite 0
comment 0
changes from original: -added space to use a nylock nut to prevent any slippage -moved nut closer to mating flange to give more range -loosened tolerance so nut doesn't have to be hammered in -tightened tolerance on plug so it stays in -changed some corners to print better -nut dimensions 6.94w x 4.94h tip: to seat the nut, pull the nut in by tightening a screw in from the flange side. matching design with M4 Knurled Nylock Bed Leveling Knob for Ender 3 https://www.thingiverse.com/thing:4770097
Topics: 3vw, thingiverse, 3D Printer Parts, belt tensioner, ender 3, ender 3 v2, knob, 3 v2, Ender, stl,...
4
4.0
Jan 6, 2021
01/21
by
Jan Köhler (Jan23r0)
data
eye 4
favorite 0
comment 0
I´ve made a dial holder for the Ender 3 v2 based on the awesome Dial-Indicator from Turbo_SunShine. Works exactly as the original holder for Ender 3. https://www.thingiverse.com/thing:4524389 I've added a little space (0.1mm) between the holder and the dial indicator because mine was so tight that it prevented the needle from moving. So leave a comment and like if you found it helpful. Some details about my print (see picture): * Because I've forgotten to reset my settings before printing, the...
Topics: Ender3v2, stl, ender3_v2, bed_leveling, thingiverse, Ender_3v2, bedleveling, 3D Printer Accessories
4
4.0
Mar 16, 2021
03/21
by
Flow Tox (FloxTox)
data
eye 4
favorite 0
comment 0
Füße für den / Feet for Ender 3v2 und alle anderen / and other 4040 V-Slot Profile
Topics: thingiverse, Creality Ender 3V2, Feet, ENDER3V2, 4040 Feet, Ender 3v2, creality_ender_3, Ender3,...
4
4.0
Mar 16, 2021
03/21
by
Robert Makes (robertd33)
data
eye 4
favorite 0
comment 0
panel for switches/knobs/power/etc. -end cap snaps in -openings on the back to give access to the whole length -slot below the rail to remove panel w/o unhooking wires -enough room to put controls on top/side/both
Topics: ender, Ender3v2, thingiverse, switch panel, switch, ender 3, ender 3 v2, switches, 3v2, stl, 3D...
3
3.0
Jul 3, 2021
07/21
by
Rogério Pedro (Fuzzo)
data
eye 3
favorite 0
comment 0
Simple and efective organizer for spare nozzles, fiting the Ender 3 v2 Drawer.
Topics: creality, drawer, Ender_3, nozzle_holder, ender, 3D Printer Accessories, ender 3v2, thingiverse, stl
5
5.0
Mar 16, 2021
03/21
by
thierry cools (blacksmuggler)
data
eye 5
favorite 0
comment 0
If you have an Creality Ender 3 v2 and you don't have enough of space in the width, this could be a solution. The Screen of the Ender 3v2 is moved to the top of the rail. You gain approximately 7 cm of width. This design is my first creation, it is light to print, no extra parts. No need to extend the genuine cable. Only need 3 screws and bolts to attach the genuine support to the adapter. This design has been improved since by this design: https://www.thingiverse.com/thing:4705966 The new...
Topics: Ender_3v2, Ender3v2, thingiverse, Creality, ender_3_v2, creality_ender_3, Ender, stl, holder,...
5
5.0
May 1, 2021
05/21
by
Sam Harford (KingSam1st)
data
eye 5
favorite 0
comment 0
3D Printable Rubber Band Deagle I mean... Idk but u may be able to CNC it aswell. UNTESTED But look at the photos. It SHOULD work in theory. It is printing now but it takes 24 hours to print all pieces but shorter if not together. No Screws needed. All you need is a 3D Printer and glue. Glue each side together. (Not the moving parts) Slot in the dowels. Load a band on the back, and shoot! I made this cos my old rubber band gun broke and I wanted to make something :D IT IS 2 DIFFERENT PARTS COS...
Topics: Spindle, Drill, rubber, 3D Printed, Game, Mechanical Toys, Dowel, cnc, CNC_Machine, Gun, long live...
2
2.0
Jan 18, 2022
01/22
by
Kevin Kohn (K2DesignLab)
data
eye 2
favorite 0
comment 0
This is a Remix of the knob COVER for the X / Y axis belt tensioner on your Ender 3v2 and others using the same OEM blue knob. The original was WAY TO TIGHT, so I made this one. Its larger in every way!
Topics: cover, thingiverse, Ender 3v2, Ender_3, knob, Belt_Tensioner, stl, 3D Printer Parts
2
2.0
Jan 18, 2022
01/22
by
Conner Wallace (conman330)
data
eye 2
favorite 0
comment 0
Couldn't find a filament guide that didn't require the removal of the z-rod screws or anything that helped hold the hotend cable in place, especially after upgrading to a metal extruder (or any aftermarket extruder).
Topics: Ender_3_Pro, 3D Printer Parts, bowden_extruder, thingiverse, z_rod, Ender_3, cable_holder,...
5
5.0
Mar 16, 2021
03/21
by
Wood Cat (Woodcat64)
data
eye 5
favorite 0
comment 0
Small remix to adjust dimensions to fit Ender3 V2
Topics: Ender_3v2, Ender3v2, thingiverse, Creality_Ender_3V2, stl, 3D Printer Parts, cable_management
4
4.0
Mar 15, 2021
03/21
by
Wood Cat (Woodcat64)
data
eye 4
favorite 0
comment 0
Remix to adjust dimensions to fit Ender3 V2 (This is re_upload, since the original just vanished from Thingiverse)
Topics: Ender_3v2, thingiverse, Creality_Ender_3V2, ender_3_v2, stl, 3D Printer Parts, cable_management
3
3.0
May 1, 2021
05/21
by
Terra Vestra (TerraVestra)
data
eye 3
favorite 0
comment 0
PERFECTO! Why? Because it's absolutely perfect in every way! Slim down your printer's profile. I squeezed every bit of clearance that I could out of the screen's mount so that it would not interfere with any aftermarket hotend assemblies. This snazzy screen mount has 15 degrees of tilt and I must say, it looks damn good on the printer. Slides in easy and locks in to place with an M4 screw; the screw hole is pre-threaded for M4. Prints at .2mm layer height and can use various M4 screw lengths (I...
Topics: stl, Screen Mount, Ender 3v2 Screen, LCD Mount, Ender 3v2 Mount, Ender 3v2, 3D Printer Parts, Ender...
4
4.0
Mar 16, 2021
03/21
by
Jetel Diraipas (Jetel73)
data
eye 4
favorite 0
comment 0
Z axis Antibacklash, provides a great stability to the Z axis. On an idea from my brother and I, The 3 springs softly tighten the PLA threads on the Z screw to avoid any unwanted movement. The E3v2 is a great printer, this item doesn't change the result by an important ammount but my prints look smother and it was really fun to design and fit, so I'm very happy with this. 1. Mount the 3 circulars springs (Ressorts) on the anti-backlash (Rattrapage jeu) 2. Screw and unscrew the anti-backlash on...
Topics: thingiverse, antivibration, anti-backlash, Z-Axis, vibration, Ender 3 v2, Ender 3v2, Ender, axe_z,...
3
3.0
May 1, 2021
05/21
by
Fredrik Aa (FredrikA)
data
eye 3
favorite 0
comment 0
ENDER 3 V2 SCREEN CASE This is a remix from https://www.thingiverse.com/thing:4625496 by Pugwash I liked the look of the screen case from Pugwash. But the OCD in me had to fix the right side and frame to cover the metal shield, so I did, and also adjusted some other things ;) The changes made compared to the original: Front 1. The bezel width are now the same on the sides. 2. The front bezel now covers the metal bezel on the LCD. 3. Added ridges to keep the cover from moving back slightly when...
Topics: stl, Ender3v2, Ender 3v2, 3D Printer Accessories, Screen Case, thingiverse, ender 3 v2
2
2.0
Sep 14, 2021
09/21
by
Cristian Herrera (cristianwh)
data
eye 2
favorite 0
comment 0
Es un soporte para montar el sensor de filamento de la cr-10s en una Ender 3 y además sirve de guía de filamento a la salida del carretel. Yo lo usé en una Ender 3v2. Como opcional, para disminuir el rozamiento, agrandé el orificio de entrada con una mecha de 4,25mm, unos 8 mm de profundidad e inserté un pedacito de teflón, que pegué con adhesivo de silicona para que no se salga. Para montarlo al perfil superior de la impresora usé unas t-nuts que descargué acá:...
Topics: runout cr-10, stl, thingiverse, filament runout, sensor runout, runout, sensor, ender3, filament...
2
2.0
Jul 22, 2021
07/21
by
Gabe Graber (gsgraber92)
data
eye 2
favorite 0
comment 0
I remixed this to fit to my Ender 3v2 with PrinterMods 1.3v plate, added BLTouch bracket, and tried to keep it as compact and light as possible. I really appreciate all the work of Eric Anastas and Edgar Noice. It works great and my bridges turn out amazing. The prints are coming out so smooth. Original: https://www.thingiverse.com/thing:4369859 Dual 4010 I Remixed: https://www.thingiverse.com/thing:4611837 I moved the left fan out to miss the left roller bolt head and added more mounting...
Topics: BL_Touch, 3D Printing, 4010_blower, stl, Ender_3v2, satsana_remix, thingiverse
2
2.0
Jul 22, 2021
07/21
by
Eugene Leafty (leaftye)
data
eye 2
favorite 0
comment 0
Strengthened zip tie attachment points and added ramps where the cables transition onto and off the part, and it's slightly thicker.
Topics: VOXELAB, Aquila, Voxelab_aquila, stl, Ender_3v2, ender_3_v2, 3D Printer Parts, thingiverse, Ender3v2
2
2.0
Oct 26, 2021
10/21
by
Silent Stray (SilentStray)
data
eye 2
favorite 0
comment 0
I liked the concept of the original, but I wanted something that was slimmer. This not done, holes don't line up properly, considering some horizontal alignment. If using ferrules, your going to want to put them in before putting the board in.
Topics: BTT, octopus, Ender3v2, 3D Printer Accessories, VOXELAB, btt octopus v1.1, v1.1, v1.0, big tree...
4
4.0
Mar 15, 2021
03/21
by
thierry cools (blacksmuggler)
data
eye 4
favorite 0
comment 0
** THIS IS AN EXTENSION MODULE FOR THIS https://www.thingiverse.com/thing:4705966** (NEW DESIGN 10/2/21 ONLY) This extension module is made to be included with "Ender 3 V2 Screen Holder (reduce space)". Designed to add a Raspberry pi 3 B+ (or older) under the TFT screen. Absolute invisible, easy to add, minimalist design, no screw needed. On the pictures, the module is in red. The raspberry can be inserted or removed easily into the module, you don't need to remove the module. Quick...
Topics: Ender3v2, upgrade_ender3v2, thingiverse, ender_3_v2_upgrades, 3D Printer Accessories, Creality,...
4
4.0
Mar 15, 2021
03/21
by
Robert Makes (robertd33)
data
eye 4
favorite 0
comment 0
I really loved the original, but I wanted to just print in 2 different filaments & not mess with paint. Will need to be glued together. The chain & cap I printed in transparent, which kinda glistens under normal light, and silver for the hub/spokes. Changes from the original: - chain split from spokes - added .5mm to increase spoke-to-chain tension - added a bottom half of spoke ends to help hold chain
Topics: lowrider, thingiverse, z knob, z wheel, ender 3 pro, z-axis, ender 3 v2, 3 v2, 3v2, stl, 3D Printer...
5
5.0
Mar 16, 2021
03/21
by
Tommy Christiansen (Sympotonic)
data
eye 5
favorite 0
comment 0
If you can use the print, please feel free to add a tip I spent tons of hours and material to get it right in the sweet spot =) I will appreciate it. This is a remix of DJ_Hammys simple sideholder for the spartel and clipper. I wanted to make one fitting all my standard and most used tools. Hex keys, precision knife, nozzle remover and even a little top tray/storage space for ekstra nozzles etc. i did not implement the wrench keys, because i allmost never use them. Source:...
Topics: thingiverse, Tool Holder, Creality, Ender 3v2, stl, Ender 3, 3D Printer Accessories
0
0.0
Aug 12, 2022
08/22
by
Mamadou BA (naedioba1)
data
eye 0
favorite 0
comment 0
This an auto power off system base on Arduino. I am using micro-switches connected to an Arduino Nano board and relays. Let Your Dreams Come True With the CR-Scan Liza Valentine's Day Custom Package.Support the project here: https://creality-cr-scan-lizard.kckb.st/b4c3a362
Topics: Ender_3, micro switch, Ender_3_Pro, 3d_printer, ender 3 s1, ender 3s1, switch, ender-3 v2, power...
0
0.0
Aug 13, 2022
08/22
by
Edward Towers (edddddd)
data
eye 0
favorite 0
comment 0
a few versions of the screen cover for the ender 3 V2. I printed mine using inland Twinkling gold and then swapped filaments at like 85% to black to let less light through. printed with no supports 35% infill
Topics: 3D Printer Accessories, 3v2, stl, thingiverse, Ender_3v2
0
0.0
Aug 13, 2022
08/22
by
Alexander Rasputin (Tavelkyosoba)
data
eye 0
favorite 0
comment 0
Aligns the creality runout sensor with the taller bondtech dual gear extruder and uses a bowden tube coupler to guide filament. Alignment isn't perfect but is good enough.
Topics: runout sensor, stl, extruder, 3D Printer Parts, thingiverse, bondetch, dual gear, Ender_3v2
