5
5.0
Mar 15, 2021
03/21
by
(Bog_)
data
eye 5
favorite 0
comment 0
This is a spacer for the Z stepper motor on the Ender 3 V2. This is probably compatible with other Ender 3's, though I don't have any other than my 3v2 to confirm. I was unhappy with other designs that I came across, mostly due to lack of adjustability for correct placement of the stepper in the X and Y direction. There are 3 versions- for M3, M4 and M5 T-nuts. You will need: 4* M3 bolts, 7 - 10mm long ( I used 8mm) 4* M3 washers Additionally: 2* T-nuts suitable for use in 2020 extrusion 2*...
Topics: Ender_3v2, Ender3v2, upgrade_ender3v2, thingiverse, spacer, alignment, Creality, z-axis_alignment,...
3
3.0
Jan 5, 2021
01/21
by
(ma77morris)
data
eye 3
favorite 0
comment 0
#Update - Updated new files listed as v2, v1 needed some tweaks to allow the pi to fit below the lid, i also changed the front air vent to allow for a easier print and also the power cord of the pi to be positioned out of the way of the display wiring i will upload some wiring diagrams in the next update to show the best way to clip in while still being able to pull out the drawer please feel free to message me any of your ideas of holding the wiring also :). happy printing. 27/09/2020 - I have...
Topics: stl, creality_ender_3, 3D Printer Parts, Ender_3, thingiverse, ender_3_v2, Ender_3v2
5
5.0
May 1, 2021
05/21
by
(squirrelf)
data
eye 5
favorite 0
comment 0
Printed and installed the last posted version and works great! So removing the work In progress label Small cleanup from overhang inside the right fan area but otherwise all good. I used support as posted screenshot Material needed: X Grantry mount: Three m3x8 for securing duct to X gantry Orbiter: Two m3 nuts ( for orbiter ) Two m3x12 ( for orbiter ) dragon / v6: Three m3x8 for dragon mount only Two m2.5x8 for dragon mount only ( Extra screws that came with the dragon ) Still unknown...
Topics: stl, creality_ender_3, Orbiter_extruder, part_cooling_duct, dragon, Ender_3, Dragonfly_BMS,...
3
3.0
Jan 7, 2021
01/21
by
Adam Lambert (Veshraine)
data
eye 3
favorite 0
comment 0
A box to house the Z stop circuit board to be re used as a filament runout sensor. this is only a guide component. Since there are a multitude of modifications to include extruder guides, spool holder mounting locations, and filament guides this is only the bare minimum to get you started modeling up a design to be used for your specific setup. This design utilizes and houses the z stop circuit board, micro switch, and mounting screws. I designed 7 different models before arriving at this one....
Topics: Ender3v2, ender 3 v 2, stl, creality_ender_3, 3D Printer Parts, Ender, Ender3, Ender_3,...
3
3.0
Jan 8, 2021
01/21
by
Adam Lambert (Veshraine)
data
eye 3
favorite 0
comment 0
Bracket for Ender 3 V2 y axis stepper motor made to help out individual from facebook group.
Topics: Ender3v2, ender 3 v 2, stl, 3D Printer Parts, Ender, thingiverse, Creality, ender 3 v2, ender 3v2
3
3.0
Jan 7, 2021
01/21
by
Adam Lambert (Veshraine)
data
eye 3
favorite 0
comment 0
A redesign of the Ender 3 v2 attachment for bed and Z chains by wku_wake. This design utilizes the hardware from the z stop mount after adding a bed level like the BL Touch.
Topics: cable_chain, cable_management, stl, Ender3V2, 3D Printer Parts, Ender, cable_guide, Ender 3 v2,...
3
3.0
Jan 6, 2021
01/21
by
Adam Lambert (Veshraine)
data
eye 3
favorite 0
comment 0
I found that if you have to remove the end caps for any reason they are easy to break if not careful, so I decided to recreate them in fusion 360 to be an exact fit so they can be printed in any color of your choice and if you so choose you can emboss text or images on the surfaces.
Topics: stl, Ender3V2, 3D Printer Parts, Ender, ender3 v2, thingiverse, ender 3 v2, ender 3v2
4
4.0
Mar 16, 2021
03/21
by
Alex Dra (Ashendar)
data
eye 4
favorite 0
comment 0
Update: 1. The fan duct fits perfectly and accomplishes what I'd set it out to do, provide a flush fit for the 5015 into the duct. 2. The BLTouch ribbon is on the right side with no way of going onto the left. 3. The X endstop is triggered normally by the gantry and not by the duct. 4. The 5015 screw holes are a bit hit or miss, I didn't have any screws to mount it properly so I used zip ties. 5. The picture is the exact same file with the added symbols of the mythosaur skull on the front and...
Topics: ender, e3v2, thingiverse, satsana, ender3v2, satsana 5015, satsana_5015_bltouch, satsana_bltouch,...
0
0.0
Aug 13, 2022
08/22
by
Alexander Rasputin (Tavelkyosoba)
data
eye 0
favorite 0
comment 0
Aligns the creality runout sensor with the taller bondtech dual gear extruder and uses a bowden tube coupler to guide filament. Alignment isn't perfect but is good enough.
Topics: runout sensor, stl, extruder, 3D Printer Parts, thingiverse, bondetch, dual gear, Ender_3v2
5
5.0
May 1, 2021
05/21
by
Anon Anon (tymbo13)
data
eye 5
favorite 0
comment 0
Remixed this as I am going to only be using the LM2685 Buck converters. Moved them around a little bit to allow for more room for the power wires. Printing now and will have my fans and buck converters in a few days to test, will update with pictures and test fitting results. Used the Buck converter file from: https://www.thingiverse.com/thing:1160062/ See the instructions for https://www.thingiverse.com/thing:4745387
Topics: stl, pi4, LM2685, Rpi4, MOBO, ender 2, Raspberry_Pi, ender 3v2, motherboard, ender 3 v2, 3D Printer...
3
3.0
Mar 15, 2021
03/21
by
Berenyi Andrei-Gabriel (berenyi)
data
eye 3
favorite 0
comment 0
Hello guys, I want to share with you my good-to-go settings for Ender-3 v2 (stock) for Prusa Slicer 2.3.0 Hope you enjoy and wish you a lot of good prints! Please note that maybe you can't use it as is, because every printer need to be calibrated for e-steps, and flow rate. Also every spool of filament has a +/- 5 to 10% difference so use this profiles at your own "risk".
Topics: tpu, thingiverse, pla, ps 2.3.0, config, brn, ender-3v2, creality, profiles, prusa slicer, bundle,...
0
0.0
Aug 13, 2022
08/22
by
Bryan Wilson (DameonX)
data
eye 0
favorite 0
comment 0
This will hold the scrapper that comes with the Ender 3v2 and a 10mm wide tweezer.
Topics: 3D Printer Accessories, Ender 3v2, stl, thingiverse, Tweezer Holder, Scapper Holder, Ender 3
2
2.0
Oct 30, 2021
10/21
by
Business User (BusinessUser)
data
eye 2
favorite 0
comment 0
Whew. Well, I've finally done it, thank bujeezus I have an extra printer to make this. This is a working replica of the tensioner housing (not the inner tensioner, just the outer shell that surrounds it). I dropped my Ender 3 v2 on the floor like a potato, so I thought I'd punish myself by painstakingly measuring the broken one with a caliper and re-creating it in TinkerCAD. I thought when they say to try power cycling it, it meant drop on floor aggressively? Well, there ya go folks! Hope the...
Topics: thingiverse, Ender_3, Ender3v2, 3D Printer Parts, stl, Ender_3v2, Creality_Ender_3V2
2
2.0
Nov 8, 2021
11/21
by
Chomper (ChomperDesigns)
data
eye 2
favorite 0
comment 0
This is a remix of https://github.com/Greg191134/Voron/tree/master/Afterburner%20Optimisation/5015%20fan%20mod to fit with the Orbiter 1.5 on the mount I made. Instructions for installation are with the link as well as the front cover for the fan. Complete setup in photos of hot end consist of: https://www.thingiverse.com/thing:4916389/files for files Body1.stl, Front_Cover2.stl, and Ender_3_v2_Mount_3.stl...
Topics: 5015_blower, stl, 5015_fan_duct, voron, Ender_3, Ender_3v2, 3D Printer Parts, thingiverse,...
2
2.0
Aug 8, 2021
08/21
by
Christian Ramakers (TremorR)
data
eye 2
favorite 0
comment 0
I found a nice design for an Ender 3v2 PSU cover with cable guide. This was the final fan upgrade (Noctua NF-A9x14 PWM fan) for the ultimate silence printing experience. For anyone interested, I followed the instructions written by DonKeulito on reddit. (https://www.reddit.com/r/ender3v2/comments/lto6uq/ender_3_v2_all_noctua_fans_buck_converter/) The PSU cover chilluniverse designed (https://www.thingiverse.com/thing:4567153) looks awesome! One issue, I had to print it sideways due to its...
Topics: thingiverse, 3D Printer Parts, silent_fan, PSU_Cover, Noctua, Ender 3v2, stl
2
2.0
Jan 18, 2022
01/22
by
Conner Wallace (conman330)
data
eye 2
favorite 0
comment 0
Couldn't find a filament guide that didn't require the removal of the z-rod screws or anything that helped hold the hotend cable in place, especially after upgrading to a metal extruder (or any aftermarket extruder).
Topics: Ender_3_Pro, 3D Printer Parts, bowden_extruder, thingiverse, z_rod, Ender_3, cable_holder,...
2
2.0
Sep 14, 2021
09/21
by
Cristian Herrera (cristianwh)
data
eye 2
favorite 0
comment 0
Es un soporte para montar el sensor de filamento de la cr-10s en una Ender 3 y además sirve de guía de filamento a la salida del carretel. Yo lo usé en una Ender 3v2. Como opcional, para disminuir el rozamiento, agrandé el orificio de entrada con una mecha de 4,25mm, unos 8 mm de profundidad e inserté un pedacito de teflón, que pegué con adhesivo de silicona para que no se salga. Para montarlo al perfil superior de la impresora usé unas t-nuts que descargué acá:...
Topics: runout cr-10, stl, thingiverse, filament runout, sensor runout, runout, sensor, ender3, filament...
5
5.0
Mar 16, 2021
03/21
by
D B (Darkwing_Duck)
data
eye 5
favorite 0
comment 0
Was annoyed by residual plastic and dirt falling into the gaps of the frame. Designed strips that close those gaps flush to the frame surface. Length is specific to the Ender 3 V2 and I will add more lengths for the whole frame eventually
Topics: strip, thingiverse, 3d printer frame, frame, flush, Creality, Ender 3V2, creality_ender_3, Ender,...
4
4.0
Jun 10, 2021
06/21
by
Dan Joerr (JanD_204)
data
eye 4
favorite 0
comment 0
This is a simple replacement part for the Ender 3 V2 (V1?). There is a small difference in comparison to the original part. The "knob" is a little longer, so that the nozzle is higher above the hotbed. The reason is that my springs for the hotbed are much longer than the original and i needed more clearence for bedleveling. I printed at: - 0.2mm layer height - 30-40% infill (?) - 3 Perimeters - "DAS Filament" PLA, but PETG should be fine.. YOU PROBABLY NEED TO SCALE ABOUT...
Topics: Ender_3, ender_3_v2, replacement, 3D Printer Parts, thingiverse, Ender_3v2, stl
3
3.0
Jun 11, 2021
06/21
by
Daniel Navarro (daniel_ironworks)
data
eye 3
favorite 0
comment 0
spacer made for the stepper motor and the aluminum profile, for a correct align between the thread from the z motor and the aluminum profile.
Topics: creality_ender_3, Ender_3, 3D Printer Parts, thingiverse, ender 3v2, stl
3
3.0
Jan 5, 2021
01/21
by
Dave Anderson (abrenoch)
data
eye 3
favorite 0
comment 0
I couldn't find a mount for my BTT smart filament runout sensor that worked well for me, so I made this one. This should mount securely to the X axis gantry and have zero play or wobble. With this particular sensor it is important to have as little play as possible. Since the extruder moves the filament back and forth so much, if the sensor starts *moving with* the filament (rather than the filament *moving through*) then it may trigger false runout events. Caused me some headaches! I remixed...
Topics: Ender3v2, stl, Filament_Sensor, fillament_runout, Runout_sensor, 3D Printer Parts, mount, Ender_3,...
3
3.0
Jan 19, 2022
01/22
by
David Ruff (DAR01)
data
eye 3
favorite 0
comment 0
Made just for the fun of it. This is a simplified model [loosely] based on an Ender 3 v2 to be used as a desktop organiser or tool caddy for the true 3D printing fanboi! Can be scaled as required in your slicer to suit your needs.
Topics: 3d_printer, simplified, Ender, model, thingiverse, tool_holder, Ender 3v2, Ender_3, Desk_organizer,...
0
0.0
Aug 14, 2022
08/22
by
Derrick Aquino (vampyrex13)
data
eye 0
favorite 0
comment 0
I took my Ender 6 BIQU H2 mount (https://www.thingiverse.com/thing:4893522/) and modified it to work with an Ender 3v1 / Pro and v2. You'll find that the BL Touch / CRTouch mounts and the fans are the exact same models. Due to the H2 cable lengths, you'll want to route the wiring so it goes through the top of the control board cover. I've included cable mangement that attaches to the x-axis motor cover and allows reusing the existing screws. I also included a new control board cover with a...
Topics: Ender-3v2, wire management, direct drive mount, BTT, CRTouch mount, Ender_3v1, Ender_3, 4010...
4
4.0
Mar 15, 2021
03/21
by
Dieuwert Wolters (DieuwertW)
data
eye 4
favorite 0
comment 0
Hey there guys, Because there is a new toolbox added to the Ender 3V2 I thought, that is not really handy by itself. So, I created a nozzle holder for the left side of the toolbox. It fits 24 nozzles and there is a little room to put your spare couplers. Contact me if you need more information, pictures or anything!
Topics: ender, nozzle_box, Box, thingiverse, Ender 3v2, creality_ender_3, Ender3, stl, Ender_3, ender_3_v2,...
3
3.0
Jun 10, 2021
06/21
by
Dirk Kumbrink (DirksBastelbude)
data
eye 3
favorite 0
comment 0
Topics: upgrade ender 3 v2, abdeckung, thingiverse, 3D Printing, Ender 3v2, BILDSCHIRMABDECKUNG, Bildschirm...
3
3.0
Jun 12, 2021
06/21
by
Dmitry Pe (feadot)
data
eye 3
favorite 0
comment 0
Direct Drive Extruder mount for Creality Ender 3v2 Changes have been made for mount Ender 3v2 (you need extra M3x10 and M3x12 screws and one M3 nut) Added Duck options for 5020 (for mount 5020 you need M3x25 screws х4)
Topics: BMG, 5020_blower, 5020, Bondtech_BMG_extruder, bondtech_bmg, thingiverse, 3D Printer Extruders,...
4
4.0
May 1, 2021
05/21
by
Douglas LeRoy (GeoStork)
data
eye 4
favorite 0
comment 0
The Ender 3 v2 has the power supply mounted to the bottom of the unit. The squash ball mount file that I "remixed" this from was too large for Tinkercad so I whipped up this set of shims. For the feet that mount at the rear of the unit, use the two shims that are "L" shaped. The other two are provided for those (like me) who felt bothered by the fact that the rear of the unit would sit 1mm higher than the front. LOL.
Topics: stl, Vibration_dampening, ender_3_v2, Ender_3v2, anti_vibration, 3D Printer Accessories, spacer,...
0
0.0
Aug 13, 2022
08/22
by
Edward Towers (edddddd)
data
eye 0
favorite 0
comment 0
a few versions of the screen cover for the ender 3 V2. I printed mine using inland Twinkling gold and then swapped filaments at like 85% to black to let less light through. printed with no supports 35% infill
Topics: 3D Printer Accessories, 3v2, stl, thingiverse, Ender_3v2
4
4.0
Jan 4, 2021
01/21
by
Eggy Sayoga (scaryPug)
data
eye 4
favorite 0
comment 0
This is a knurled extruder knob for Ender 3, tested on Ender 3 v2. Should fit any stepper motor with 5mm shafts F3d file included for easy remix. Print it with flat side down, no support needed.
Topics: Ender3v2, knurling, stl, 3D Printer Parts, knob, Ender_3, extruder_knob, extruder, knurled,...
2
2.0
Apr 19, 2022
04/22
by
Emiro Guerrero (emguepo)
data
eye 2
favorite 0
comment 0
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
Topics: thingiverse, ender 3v2, CR6-SE, fusion_360, 3D Printer Accessories, Creality_CR6-SE, Ender_3_Pro,...
2
2.0
Jul 22, 2021
07/21
by
Eugene Leafty (leaftye)
data
eye 2
favorite 0
comment 0
Strengthened zip tie attachment points and added ramps where the cables transition onto and off the part, and it's slightly thicker.
Topics: VOXELAB, Aquila, Voxelab_aquila, stl, Ender_3v2, ender_3_v2, 3D Printer Parts, thingiverse, Ender3v2
3
3.0
Jun 22, 2021
06/21
by
FRANCOIS (Nemogm07)
data
eye 3
favorite 0
comment 0
Hello, after a difficult job, I present the first Mistral Fan mod for Ender 3 V2! Very easy to install especially if you use my ratchet screwdriver ;-) https://www.thingiverse.com/thing:4853538 Plug ang play No modifications Recommended abs 20% infill Enjoy !
Topics: stl, mod, thingiverse, Creality_Ender_3V2, fan_duct, mistral, Ender3v2, creality_ender_3, fan, 3D...
4
4.0
Mar 16, 2021
03/21
by
Flow Tox (FloxTox)
data
eye 4
favorite 0
comment 0
Füße für den / Feet for Ender 3v2 und alle anderen / and other 4040 V-Slot Profile
Topics: thingiverse, Creality Ender 3V2, Feet, ENDER3V2, 4040 Feet, Ender 3v2, creality_ender_3, Ender3,...
3
3.0
May 1, 2021
05/21
by
Fredrik Aa (FredrikA)
data
eye 3
favorite 0
comment 0
ENDER 3 V2 SCREEN CASE This is a remix from https://www.thingiverse.com/thing:4625496 by Pugwash I liked the look of the screen case from Pugwash. But the OCD in me had to fix the right side and frame to cover the metal shield, so I did, and also adjusted some other things ;) The changes made compared to the original: Front 1. The bezel width are now the same on the sides. 2. The front bezel now covers the metal bezel on the LCD. 3. Added ridges to keep the cover from moving back slightly when...
Topics: stl, Ender3v2, Ender 3v2, 3D Printer Accessories, Screen Case, thingiverse, ender 3 v2
4
4.0
May 1, 2021
05/21
by
Frédéric Dehu (fred2u)
data
eye 4
favorite 0
comment 0
This is a remix from https://www.thingiverse.com/thing:4731421 and https://www.thingiverse.com/thing:4637453
Topics: stl, Satsana_5015_BLTouch, fan_duct, Creality, Ender_3v2, satsana_remix, 3D Printer Parts, 4010,...
4
4.0
May 1, 2021
05/21
by
Frédéric Dehu (fred2u)
data
eye 4
favorite 0
comment 0
PSU Cover inspired from https://www.thingiverse.com/thing:4653994 This cover houses a 80x25mm fan and you can fix a LM2596 buck converter. You will need 2 extra M3x8 screws to fix the cable cover to the PSU cover. And you will have to raise your printer, I use these feet for that https://www.thingiverse.com/thing:4789307
Topics: stl, Fan_mount, ender_3_v2, Ender_3v2, 3D Printer Parts, thingiverse, PSU_Cover
2
2.0
Jul 22, 2021
07/21
by
Gabe Graber (gsgraber92)
data
eye 2
favorite 0
comment 0
I remixed this to fit to my Ender 3v2 with PrinterMods 1.3v plate, added BLTouch bracket, and tried to keep it as compact and light as possible. I really appreciate all the work of Eric Anastas and Edgar Noice. It works great and my bridges turn out amazing. The prints are coming out so smooth. Original: https://www.thingiverse.com/thing:4369859 Dual 4010 I Remixed: https://www.thingiverse.com/thing:4611837 I moved the left fan out to miss the left roller bolt head and added more mounting...
Topics: BL_Touch, 3D Printing, 4010_blower, stl, Ender_3v2, satsana_remix, thingiverse
4
4.0
Jan 6, 2021
01/21
by
Jan Köhler (Jan23r0)
data
eye 4
favorite 0
comment 0
I´ve made a dial holder for the Ender 3 v2 based on the awesome Dial-Indicator from Turbo_SunShine. Works exactly as the original holder for Ender 3. https://www.thingiverse.com/thing:4524389 I've added a little space (0.1mm) between the holder and the dial indicator because mine was so tight that it prevented the needle from moving. So leave a comment and like if you found it helpful. Some details about my print (see picture): * Because I've forgotten to reset my settings before printing, the...
Topics: Ender3v2, stl, ender3_v2, bed_leveling, thingiverse, Ender_3v2, bedleveling, 3D Printer Accessories
3
3.0
Jan 8, 2021
01/21
by
Jaroslaw Filiochowski (jarfil)
data
eye 3
favorite 0
comment 0
Clip to attach the plastic basket of an Automatic Fire Extinguishing Ball to the top rail of an Ender 3v2, or any other 20x20mm extrusion. Since the basket is a round, two rotating clips are printed in place to clip onto it. They are printed with supports in order to retain the most layer tenacity for the clip action. Print twice to hold the basket on both sides. Includes clearance for [Customizable v-slot cover plus](http://www.thingiverse.com/thing:3396601).
Topics: stl, FreeCAD, Safety, Ender 3, thingiverse, Fire, FCStd, 3D Printer Accessories, Ender 3v2
2
2.0
Jan 6, 2021
01/21
by
Jason Christensen (RedWhere2020)
data
eye 2
favorite 0
comment 0
Designed this RPi cam holder so it raises with the z-axis. M3/M5 bolts required. measure length to suit. It pivets, twists and sort of extends. Printed in PLA+. Yes it adds weigth the z-axis but I have also counted that by upgrading my Ender-3v2 adding a second lead screw. Works for me.
Topics: Cam Mount Ender-3v2, Ender3v2, 3D Printing, stl, RPi Cam, RPi Cam Mount, Ender-3v2 RPi cam,...
4
4.0
Jan 8, 2021
01/21
by
Jason Christensen (RedWhere2020)
data
eye 4
favorite 0
comment 0
This is v2, an upgrade I think to the previous version. Made of 5 parts that are much easier to print. Screw them together with M2.5x10mm Socket Head screws. Designed this for those requiring a basic and reasonably compact Micro Swiss compatible hotend cooling duct modeled off Crealities Ender 3v2 OEM fan shroud with part cooling pointing either side of the nozzel using the two stock fans. You need to thread tap the top two v-slot roller mount holes on the front of the Micro Swiss extruder...
Topics: Ender_3v2 Cooling, stl, Microswiss Ender 3v2, 3D Printer Parts, Ender_3, micro, thingiverse,...
4
4.0
Mar 15, 2021
03/21
by
Jason Toews (Everlanders)
data
eye 4
favorite 0
comment 0
We recently installed an Ender 3 V2 in our off-road camper and with space being at a premium, I tried to make it as compact as possible. The X-axis tension adjuster stuck out too far for my linking and would often get caught on other wiring, so I drew up the simple holder you see above. I was expecting to have to tension the best at the print head, but the first one I printed fit perfectly. I have also included a second version that is spaced out 0.5mm further if you need more tension over...
Topics: Ender_3v2, thingiverse, x-axis, ender_3_v2, stl, 3D Printer Parts
4
4.0
May 1, 2021
05/21
by
Jetel Diraipas (Jetel73)
data
eye 4
favorite 0
comment 0
Hello Unless you are lucky ; using a precision square will show that a printed cube is not really square in all directions. Especially if you use the portico as an handle or you let a 1kg spool gently ply it all day long... Then you have to fine tune the Z profiles to square them perfectly with the absolute reference that is the Y profile. Here is my solution to fine tune my Ender 3v2. Advanced user only ! I'll not give a step by step tutorial just few tips. Assemble the M6 threaded rods in the...
Topics: stl, square, finetuning, Ender_3, Ender 3v2, 3D Printer Parts, thingiverse, Squaring
3
3.0
May 1, 2021
05/21
by
Jetel Diraipas (Jetel73)
data
eye 3
favorite 0
comment 0
Hello, You just need a little washer to fix this annoying pneumatic locker. It is easy to dismantle the lock, insert the washer behind the o'ring to increase the grip, reassemble and firmly reengage the bowden tube in place. Here is a tutorial illustrated to follow the steps. It is in french, use Google translator module if necessary. Enjoy !
Topics: stl, locker, Ender_3, Ender 3v2, Pneumatic lock, 3D Printer Accessories, thingiverse
4
4.0
Mar 16, 2021
03/21
by
Jetel Diraipas (Jetel73)
data
eye 4
favorite 0
comment 0
Z axis Antibacklash, provides a great stability to the Z axis. On an idea from my brother and I, The 3 springs softly tighten the PLA threads on the Z screw to avoid any unwanted movement. The E3v2 is a great printer, this item doesn't change the result by an important ammount but my prints look smother and it was really fun to design and fit, so I'm very happy with this. 1. Mount the 3 circulars springs (Ressorts) on the anti-backlash (Rattrapage jeu) 2. Screw and unscrew the anti-backlash on...
Topics: thingiverse, antivibration, anti-backlash, Z-Axis, vibration, Ender 3 v2, Ender 3v2, Ender, axe_z,...
0
0.0
Aug 14, 2022
08/22
by
Justin Hoole (jrmh2000)
data
eye 0
favorite 0
comment 0
Blank Xaxis cover for ender series printers. Cover the QR code. Supports needed
Topics: ender cover, ender, 3D Printer Accessories, ender cover blank, xaxis, blank cover, ender 3v2, stl,...
0
0.0
Aug 14, 2022
08/22
by
Justin Hoole (jrmh2000)
data
eye 0
favorite 0
comment 0
Combining the city of atlantis with the ender Xaxis cover. Supports needed.
Topics: ender cover, ender, atlantis ender, atlantis ender cover, ender qr cover, ender xaxis, atlantis...
1
1.0
Apr 20, 2022
04/22
by
K2 Kevin (K2DesignLab)
data
eye 1
favorite 0
comment 0
Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for release. PLEASE POST YOUR MAKES! P R I N T S: - K2 Satsana Dual Fan Duct - Wire Hide press fit L-cover (Top) - Fan grills (Optional) F E A T U R E S: - Stock Fan size 4010 Fans (Link below) - Dual Parts Fan Ducting - CRTouch/BLTouch Mount (reinforced) - Mounting...
Topics: thingiverse, Stock Fans, Ender 3v2, Satsana Grill, Satsana, Dual Fan Duct, 3D Printer Extruders,...
2
2.0
Dec 13, 2021
12/21
by
Kai Flogaus (fiaskogaul)
data
eye 2
favorite 0
comment 0
Remix der Skalpellhalterung von @jacobwe21. Beim neu Design habe ich die Lücken zwischen Klammern und Hülse aufgefüllt um das Teil besser druckbar zu machen. ======================================= Remix of the scalpel holder by @jacobwe21. In the new design I filled the gaps between the brackets and the sleeve to make the part more printable.
Topics: ender_3v2, scalpelholder, Creality_Ender3v2, Skallpell, Skallpellhalterung, stl, 11mm,...
3
3.0
Jan 18, 2022
01/22
by
Kevin Kohn (K2DesignLab)
data
eye 3
favorite 0
comment 0
This is for the MicroSD to MicroSD extension (Micro SD to Micro SD Card Extension Cable Adapter Flexible Extender found on Amazon and elsewhere). Remix removed text from face of the cover and worked on fitment/contour to match Ender 3v2. (MicroSD Extension Cover v2.1.stl) 1. Cover with MicroSD logo (MicroSD_Extension_Cover-Holder.stl) 2. Cover without Logo (MicroSD Extension No Logo.stl) 3. (MicroSD Extension Cover v2.1.stl) Work in progress.. Changed contour to match closely with printer edges...
Topics: microSD_holder, thingiverse, Ender 3v2, Ender_3, Cover, stl, MicroSD, 3D Printer Accessories,...
