4
4.0
May 1, 2021
05/21
by
Matthew Vazquez (RT3DWorkshop)
data
eye 4
favorite 0
comment 0
I saw on r/eufy there was a request for a windows mount option similar to the wzye camera. I previously created an outdoor enclosure for the Eufy 2K Camera here: https://www.thingiverse.com/thing:4638649 So creating this didn't take too long. It uses the 3M Command Picture Hanging Strips (Medium) found here. (#ad) https://is.gd/jollvV This mount allows the camera to be pulled flush against the window. Please Enjoy.
Topics: stl, eufy, Household, eufy_mount, eufy_security, eufy_2K, eufy_2k_cam, thingiverse, eufy_2k_camera
3
3.0
Jan 3, 2021
01/21
by
Rob Giles (wonkyelbow)
data
eye 3
favorite 0
comment 0
This is a re-mix of a 35 degree shim for the Eufy 2K wired doorbell. Due to where my previous bell was and my front door being higher up I needed it angled downwards slightly. I have included two files - one for where it is needed angled to the left, and the other to the right. It might not be the prettiest remix (I'm not great at designing stuff!) but it works and when installed looked quite neat and tidy! Thanks to the original uploaders!
Topics: stl, eufy_security, Eufy_doorbell, thingiverse, eufy, Outdoor & Garden
2
2.0
Jan 7, 2021
01/21
by
Matthew Vazquez (RT3DWorkshop)
data
eye 2
favorite 0
comment 0
I recently purchased the Eufy off amazon because it was very cheap, I have the YI Home outdoor cameras but they are not 2k. Since the Eufy camera was meant for indoor, I designed an enclosure to be used outdoors. There are (2) variations of the design for the Eufy Security 2K Indoor Cam https://amzn.to/3mF0wCu (#ad) Stock Mount - These are to be used with the mount/stand that comes with the camera. 1 x Eufy2kCamera_StockMount_Enclosure_v2.stl 1 x Eufy2kCamera_StockMount_Backplate_v2.stl 1 x...
Topics: eufy_2k_cam, stl, eufy_outdoor_camera, eufy_security, eufy_2k_camera, thingiverse, eufy_outdoor,...
1
1.0
Jan 18, 2022
01/22
by
Al Thron (Althron)
data
eye 1
favorite 0
comment 0
Eufy H30 Wandhalter für die Motorbürste
Topics: eufy, h30, thingiverse, Eufy H30, Household Supplies, eufy_vacuum, stl
2
2.0
Jan 8, 2021
01/21
by
Samuel Thrysoe (ichicken)
data
eye 2
favorite 0
comment 0
Using the Eufy Indoor Cam 2K outside is definitely possible. Though this is extremely cost-effective compared to the actual outdoor cameras, owing to the intended use, the Indoor version is not protected from weather. I have taped over all the external openings apart from the micro-USB connection but wanted a bit more protection for my cameras and accordingly created this 3D printed cover to slide over the camera and afford it more protection from rain from above.
Topics: eufycam2, stl, eufy_security, Camera, thingiverse, eufy
1
1.0
Oct 29, 2021
10/21
by
Brad Crc (bradcrc)
data
eye 1
favorite 0
comment 0
Quick, ugly wedge for eufy 2k doorbell to fill the gap with dutch lap vinyl siding.
Topics: thingiverse, eufy, stl, Electronics, Eufy_doorbell
2
2.0
Jan 4, 2021
01/21
by
Paul Louy (Superchill11)
data
eye 2
favorite 0
comment 0
I needed a mount for my doorbell to face a different direction and designed this to mount where my existing doorbell goes.
Topics: stl, Eufy_doorbell, Household, thingiverse, eufy
1
1.0
Aug 22, 2021
08/21
by
Manuel Campana (itsmannyy)
data
eye 1
favorite 0
comment 0
This is a remix of [RT3DWorkshop](https://www.thingiverse.com/rt3dworkshop/designs)'s [design](https://www.thingiverse.com/thing:4828390). I've just added a -25° angle because I'm on the 2nd floor, and changed the slots to fit my very thin hanging strips.
Topics: window, window_mount, Household, eufy_2k_camera, eufy_2k_cam, eufy, Eufy camera, eufy_security,...
4
4.0
Jan 16, 2021
01/21
by
Leigh Donald (Leighbus)
data
eye 4
favorite 0
comment 0
I designed this 45 degree mount for the Eufy 2k wired doorbell, it is designed to use both sets of screws that are provided with the doorbell, use the long ones to attach the mount to the wall then use the smaller screws to mount the doorbell backing plate to the mount. Should be printed with the large flat face down on print bed. Prints without supports, rafts or brims. I used 25% infill but i think 50% would be better to make it stronger.
Topics: video_doorbell, Electronics, doorbell, eufy_security, thingiverse, Eufy_doorbell, eufy, stl
2
2.0
May 20, 2021
05/21
by
Thomas Vercruysse (TVercruysse)
data
eye 2
favorite 0
comment 0
i printed this with 5 perimeters. The screw holes are not really refined but since this is MKI im not really bothered, i had to use a file to widen the screw holes - just a little bit - to line up the screws correctly, this will be fixed in one of the next weekends. pictures will follow too. TODO: - [ ] adjust screw hole angle - [ ] upload picture(s) - [ ] upload multiple angles (im thinking 25/30/35/45/65/75/90) - [ ] clean up scad file - [ ] publish scad file (*)
Topics: eufy, thingiverse, Parts, Eufy_doorbell, stl
2
2.0
Apr 18, 2021
04/21
by
Dev Tea (_dev_tea)
data
eye 2
favorite 0
comment 0
The 15 degree shim that comes with the Eufy 2k wired video doorbell isn't enough to get a good view at a right angle from the wall the doorbell is mounted on. This 35 degree shim gives a perfect angled view.
Topics: doorbell, Replacement Parts, thingiverse, stl, eufy, Eufy_doorbell
2
2.0
Jul 3, 2021
07/21
by
Charlie Clark (MrC500)
data
eye 2
favorite 0
comment 0
Print as it is.
Topics: Household, eufy, Eufy_doorbell, thingiverse, stl, rain, raincover
4
4.0
Jun 20, 2021
06/21
by
Luis Chacón (luis_green)
data
eye 4
favorite 0
comment 0
I printed several times this gear and broke, so I was tired of doing this over and over again, so I re-maked with a different approach, lower shatf hole, solid broom holder You will need to use a dremel to alter the holes on the brooms so it can fit in this design. Don´t drill too much so it can enter by pressure. This round design will spread the axial load more efficiently. It wont be as OEM, won't look great, but **IT WON'T BREAK**. Is really hard to buy one of these motors, so, If this...
Topics: eufy, thingiverse, eufy_vacuum, vacumm, stl, Replacement Parts
2
2.0
Jul 3, 2021
07/21
by
Troy Allen (LV-426)
data
eye 2
favorite 0
comment 0
This is a revised slip on wall mount for the Eufycam HD camera (the one with the magnetic ball mount) It has a better purchase on the slot in the ball mount and holds the magnetic cup tighter to the wall giving less chance of vibration or movement of the Base. The standard package comes with only 4 supplied, by placing more around your home or business you are able to move the camera around easily for functions or events then return the camera to the original location later, giving you more...
Topics: eufy_security, Camera, eufy, thingiverse, stl, eufycam
1
1.0
Apr 19, 2022
04/22
by
CHRISTOPHE GREVIN (ouarlux)
data
eye 1
favorite 0
comment 0
apres plusieurs demande, j'ai fais une adaptation EUFY CAM 2C HOLDER fixation sur tube descente gouttière tube diamètre 100mm je ne l'ai pas teste car je ne dispose pas de tube de 100mm donc si vous voyez un probleme, le fichier fusion360 est joint, ou alors vous me le dite et je changerai moi meme
Topics: thingiverse, gouttiere, DIY, cam2c, eufy, 100mm, stl, eufy_security
2
2.0
May 1, 2021
05/21
by
Jeff Janovsky (ToDumToKnow)
data
eye 2
favorite 0
comment 0
Eufy Video Doorbell 2k angled shim to be used in conjunction with the provided left/right angled bracket. The shims included are specific if the Eufy angled bracket angles to the right (angled to the left when looking directly at the camera). The models could be mirrored to be utilized for the left as well. Two shims included to angle the camera down either 7.5* or 10*. This is not the most eloquent design, but it accomplishes the goal. Notes: -This is installed between the wall and angled...
Topics: stl, eufy_2k_camera, eufy, Eufy_doorbell, eufy_security, shim, eufy_2K, Other, angle, thingiverse,...
0
0.0
Apr 19, 2022
04/22
by
Wiggle Styx (Wigglestyx)
data
eye 0
favorite 0
comment 0
The Eufy Dual Cam Doorbell only comes with a 15 degree adapter. I need something more so I made one that was 55 degrees, then adjusted it for 45, 35 and 25. Because of the high degree on the 55 and 45 you need to screw the plate into the adapter. The 25 and 35 should work just like the 15, you probbaly just need longer screws.
Topics: Parts, thingiverse, Doorbell_mount, dual_cam, Eufy_doorbell, eufy, Dual_Camera_mount, stl,...
3
3.0
Mar 15, 2021
03/21
by
matteo mazzotti (matteotgn)
data
eye 3
favorite 0
comment 0
Eufy homevac S11 Battery Holder wall mount
Topics: thingiverse, Electronics, battery_holder, eufy_vacuum, stl, eufy
1
1.0
Nov 30, 2021
11/21
by
J.A. Westenberg (bootjevaarder)
data
eye 1
favorite 0
comment 0
This is a 45 degrees wedge for the Eufy 2k Doorbell with Homebase 2. If desired you can add the extra 5 or 10 degrees wedges, You will need 2 extra screws to attach the doorbell to the wedge(s).
Topics: eufy_security, thingiverse, Eufy_doorbell, stl, Outdoor & Garden
2
2.0
Jan 7, 2021
01/21
by
CHRISTOPHE GREVIN (ouarlux)
data
eye 2
favorite 0
comment 0
EUFY CAM 2C HOLDER fixation sur tube descente gouttière tube diamètre 80mm
Topics: stl, cam2c, eufy_security, Camera, 80mm, thingiverse, gouttiere, eufy
1
1.0
Aug 22, 2021
08/21
by
Gar p (Garps)
data
eye 1
favorite 0
comment 0
I designed this for the Eufy 2k Battery Doorbell with Homebase 2 Version its a 23 degree angled mount in which the doorbell fits snugly and hides the ends of the face plate and looks neater on the door frame / wall when installed and also gives it some protection from the elements and with an anti theft device which might stop opportunist thieves or at least give you time to catch them! You can pm me for operating / installation instructions if you need to, though once printed it should be made...
Topics: Household, anti theft, security, Eufy_doorbell, mount, doorbell, eufy, stl, thingiverse
3
3.0
Mar 16, 2021
03/21
by
Lucas Boyle (PotatoBaron)
data
eye 3
favorite 0
comment 0
I live in an apartment so I didn't want to drill anything into the wall/door frame to mount my camera. I also wanted to be able to recharge it without taking it off the door. You'll probably have to trim some plastic off the end of the microUSB cable so it can fit through the peephole tube. There is a small cutout in the mount for the USB port cover so I wouldn't have to cut it off. I uploaded models with and without the cutout in case you want to remove the cover. The one I actually printed...
Topics: thingiverse, doorbell, peephole, Eufy_doorbell, Doorbell_mount, stl, Household, eufy
2
2.0
Mar 2, 2021
03/21
by
Craig Patrizio (clpatrizio)
data
eye 2
favorite 0
comment 0
Eufy video doorbell mount for the new 2k battery/wired unit: 1) Fits in place of existing standard doorbell and uses the same screw holes 2) Has custom threaded screw hole covers 3) Has channels to run the wires to the back of the Eufy mounting plate 4) Angled 90 degrees so unit is forward facing 5) Recessed screw holes for the Eufy mounting bracket so that it fits flush against adapter 6) Slightly offset to tuck the Eufy doorbell closer to door jam making more free space in doorway
Topics: video doorbell, eufy, thingiverse, stl, Eufy_doorbell, 90_degree, 3D Printing
2
2.0
Jun 11, 2021
06/21
by
Sven E (esven)
data
eye 2
favorite 0
comment 0
This is a mounting plate to mount the eufy Doorbell wired to an existing STR Türstation TT. In this model the camera sits on the right side of the door with a 15° angle for a better viewing angle. Print both files and glue them together. I've printed the doorplate lying on the back with support. The current version is printed using PLA but I will reprint it using ASA. If you need to modify the part, feel free to use the attached f3d file. For assembly, put M3x12 screws into the mounting plate...
Topics: STR, Eufy_doorbell, Camera, eufy, thingiverse, Doorstation, Tü, rstation, stl
2
2.0
Jan 5, 2021
01/21
by
MacGyver (MacGyver)
data
eye 2
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/dXcPxOLLNtu
Topics: 3D Printing, all terrain, sweep, stl, eufy vacuum, vacuum, robovac, thingiverse, eufy, clean
2
2.0
Apr 24, 2021
04/21
by
Maikel Verheijen (Hurly)
data
eye 2
favorite 0
comment 0
This is a wedge-mount for the Eufy doorbell battery. It uses the mounting holes of my old doorbell button, which is a common doorbell button in the Netherlands. The Eufy backplate is fixed with 3x20 mm screws, as the 3x25 screws that came with the doorbell were too large, however I would pick 3,5x20 next time for a slightly more solid fix. Design link: https://www.tinkercad.com/things/9ufTBR3Bduj Doorbell link: https://www.eufylife.com/products/variant/video-doorbell-batterypowered/E82101W3
Topics: 3D Printing, Doorbell_mount, battery, eufy, stl, Eufy_doorbell, thingiverse, doorbell
2
2.0
May 1, 2021
05/21
by
Marieke Neveling (Nevelma)
data
eye 2
favorite 0
comment 0
You can use M6 Screws to mounting the Wall holder. You can easily put your homebase 2 station in this holder without tricky clamping or mounting. You can use the holder for the eufy Homebase 2.
Topics: stl, homebase, eufy, Household, thingiverse
1
1.0
Sep 13, 2021
09/21
by
Gar p (Garps)
data
eye 1
favorite 0
comment 0
I designed this for the Eufy 2k Battery Doorbell with Homebase 2 Version its a Flat mount in which the doorbell fits snugly and hides the ends of the face plate and looks neater on the door frame / wall when installed and also gives it some protection from the elements and with an anti theft device which might stop opportunist thieves or at least give you time to catch them! You can pm me for operating / installation instructions if you need to, though once printed it should be made clearer on...
Topics: door, stl, thingiverse, Eufy_doorbell, ring, anti theft, outdoor, Household, doorbell, eufy, mount
3
3.0
Apr 21, 2021
04/21
by
orlando micele (teamtech)
data
eye 3
favorite 0
comment 0
This cover is designed to camouflage your Eufy 2C camera to make it inconspicuous and a great way to help it blend into the great outdoors, also adds a extra level of protection against the elements. The cover requires no modification to your Eufy 2C camera simply slip it into the house and place the roof pm top job done. The case has a mounting hole that can be used in conjunction with your existing camera mount. The cover also allows easy access to the micro usb charge port located at the...
Topics: eufy, thingiverse, stl, Camera, CCTV
2
2.0
Oct 14, 2021
10/21
by
Dirk Schaedlich (Langustensorbet2)
data
eye 2
favorite 0
comment 0
eufy HomeVac H30 adapter to 35mm
Topics: stl, thingiverse, Household, eufy_vacuum
2
2.0
Jan 19, 2021
01/21
by
STEVEN COMBS (stevencombs)
data
eye 2
favorite 0
comment 0
I used SketchUp to create this eufy video doorbell mount. My mother's condo had a doorbell installed (see image) that was mounted horizontally. I did not want to drill additional holes so I used the included bracket to designed a mounting plate (this model) for the bracket. As you see in the final image, the mount works well. It's solid and has held up well the past couple of weeks. Feel free to use the mount to fashion your own. This is the eufy Doorbell model: https://amzn.to/3iGH8DT
Topics: doorbell, Outdoor & Garden, stl, thingiverse, brick mount, Eufy_doorbell, mount, eufy,...
1
1.0
Apr 19, 2022
04/22
by
Sven E (esven)
data
eye 1
favorite 0
comment 0
45° Wall mount for eufy Spaceview baby monitor. I'm using Tesa Power strips to attach it to the wall. That way it can be removed without damaging the paint and I can also use it in holiday homes.
Topics: thingiverse, Babyphone, eufy, spaceview, Organization, stl
2
2.0
Jan 5, 2021
01/21
by
M. PN (mpneuried)
data
eye 2
favorite 0
comment 0
To mount the flat mounting system to a 36mm pole i created an adapter. It's designed for the eufycam2. Probably other eufy cams are campatible.
Topics: eufy security, camera_mount, eufycam2, stl, pole, surveillance, thingiverse, eufy, Outdoor &...
2
2.0
Jan 4, 2021
01/21
by
Jonas Friedmann (frdmn)
data
eye 2
favorite 0
comment 0
In case you lost the original wall mount clip with the threaded, here's a replacement one for you to use. TODO: - Double check base height to make sure it has a tight fit without any additional adhesive necessary. - Add two wholes for optional screws
Topics: eufy, stl, Replacement Parts, thingiverse
2
2.0
Jun 11, 2021
06/21
by
Snow Cult (SnowCult)
data
eye 2
favorite 0
comment 0
Tried the other designs on here with little success. This one protects the USB from water and stops anyone from easily removing the SD card. It's an easy slip on and off (if you know about it). Not waterproof in the front, but if you're mounting under an ease and angling down, I don't foresee any water related issues. I found, no matter how big I made the circle in the front, the IR lights reflected off the case and made the video cloudy, so I went with an open face design after several...
Topics: Camera, eufy, stl, thingiverse, eufycam
2
2.0
May 1, 2021
05/21
by
Marcel Meissel (linuxq)
data
eye 2
favorite 0
comment 0
Case mount for the Eufy battery doorbell. It has a small anti theft feature. You need a M4 nut and a M4x40 mm screw. I use a screw with Torx drive with pin. The tool for it is not too common. The screw blocks the hole to unlock the eufy mechanism that holds the bell in place. Thus you need to unscrew the screw first. Close the hole of the screw with the small piece (glue it in). Ok, with brute force you can just break the whole thing, but it is a step more to steal it. Have fun with it! V3 ist...
Topics: stl, Eufy_doorbell, thingiverse, Household Supplies
3
3.0
Jan 6, 2021
01/21
by
Jay Kay (JayKayFPV)
data
eye 3
favorite 0
comment 0
A Mount for the Eufy 2C Camera with a 30 degree angle, you may need longer screws.
Topics: cctv, eufycam2, stl, security, Camera, thingiverse, security camera, eufy, eufy 2c, home security,...
2
2.0
Apr 4, 2021
04/21
by
John Thomas (Hypnonotic)
data
eye 2
favorite 0
comment 0
This should fit any of the Eufy Robovac 11 models. .5mm pitch, 46t gear that often strips out when the side brush gets jammed. The only other replacement option I found was replacing the entire motor assembly and those had month long shipping times. If you want to edit the FreeCAD model, make sure you install the FCGear plugin before opening the file, otherwise it will corrupt the file. Thanks, Enjoy!
Topics: thingiverse, robovac, Replacement Parts, stl, eufy
1
1.0
Apr 19, 2022
04/22
by
Tim Tetteroo (Blueeye225)
data
eye 1
favorite 0
comment 0
A remix on the anti theft doorbell case mentioned below. this is with a 50mm offset!!
Topics: thingiverse, Eufy_doorbell, Outdoor & Garden, antitheft, stl
2
2.0
Jan 5, 2021
01/21
by
Tobias Spiess (x20011)
data
eye 2
favorite 0
comment 0
The included 15 degree angle was not sufficient for our application. With the printed 40 degree angle we can now see our complete driveway.
Topics: Doorbell_mount, security_camera, stl, Eufy_doorbell, doorbell, Home_security, Household,...
2
2.0
Jan 19, 2022
01/22
by
Mo We (MoWeBo)
data
eye 2
favorite 0
comment 0
A simple stand for my eufycam 2 Pro with the magnetic indoor mount.
Topics: eufy, thingiverse, Camera, stand, stl, camera
2
2.0
May 1, 2021
05/21
by
Dirk Bucka-Lassen (Dibuck)
data
eye 2
favorite 0
comment 0
Inspired by https://www.thingiverse.com/thing:4669093 I created this Eufycam adapter to attach to a 14cm (diameter) pole with zip ties.
Topics: stl, Outdoor & Garden, adapter, Eufy, thingiverse
1
1.0
Oct 26, 2021
10/21
by
Der Onkel (HeavyMetalGuy)
data
eye 1
favorite 0
comment 0
Just screw the original camera mount to the adapter and you can mount the babycam on the rail to a babybay (or other babybeds with 30mm rails).
Topics: babybay, Babyphone, babycam, Household, eufy, stl, thingiverse
2
2.0
Mar 3, 2021
03/21
by
Guenter Lueer (Guenter)
data
eye 2
favorite 0
comment 0
Eufy Robovac with caries my Eufy robot vacuum has started to get extremely loud. Looking for the cause, it turned out that the gearbox of the front right side brush suffered from tooth loss. The peculiarity in this case is that the outer larger gear rim has helical teeth and the smaller gear rim has normal teeth. In order to recreate the combined gear, I created the individual gears in FreeCad, because the helical gearing can also be carried out easily here. Since the module size was not...
Topics: Replacement Parts, eufy, thingiverse, robovac, stl, saugroboter
2
2.0
Mar 26, 2021
03/21
by
Kris Ess (Fabr1c8)
data
eye 2
favorite 0
comment 0
This is a design for a removable bumper for your robotic vacuum cleaner in case it constantly gets stuck under your cabinets like mine does. I use suction cups that can be bought at the Dollar Tree store (an American chain where everything costs $1.00) as the base for the bumper. The hooks are removed from the suction cups, the 3D printed shim is placed over the bare stud and then the bumper is secured to the stud using a 3mm pin or M3x12-15 bolt. The pictures should make the process self...
Topics: stl, thingiverse, vacuum, iRobot, eufy, Roomba, Household
1
1.0
Apr 20, 2022
04/22
by
James Bretz (jamesbretz)
data
eye 1
favorite 0
comment 0
Simple t-slot mount plate for Eufy 2K camera. I used 2x M3x12 socket head bolts with nuts to mount the camera to the plate. It's a little tricky but once you start the nuts you can use the plate to pressure the bolt head. M5 with t-nuts to mount and it holds very solid. Using this on the top rear channel of an Ender 5 Plus and just enough room to clear my loom and hotend carriage in the rear right corner.
Topics: thingiverse, 3D Printer Accessories, eufy, eufycam, stl
2
2.0
Apr 1, 2021
04/21
by
Spencer Burridge (MentallyDetached)
data
eye 2
favorite 0
comment 0
The Eufy RoboVac is an awesome vacuum that makes life a whole lot easier.... but somehow it's happened to find a particular piece of furniture that it can for some reason barely slide under but can never get out. Well, it's finally time to do something about it! Turns out there is a small flat section in the middle of the front bumper that is perfect for clipping (was this destiny?!). I've only tested this for a day so far but it works perfectly for me. I'm not sure if it is covering any...
Topics: robovac, thingiverse, Electronics, accessories, vacuum, eufy, bumper, stl
1
1.0
Dec 1, 2021
12/21
by
Ostella 3D (Ostella3d)
data
eye 1
favorite 0
comment 0
This is a model of the Eufy Indoor Cam 2K. The purpose of this model is to allow others to import and reference it for their designs. I tried my best to include accurate dimensions. Please comment if you notice any issues and I will probably update the model. I also included photos of partial disassembly for others to reference if desired. MAKE SURE YOUR SD CARD IS EJECTED BEFORE YOU DISASSEMBLE THE CAMERA! Additional Useful resources:...
Topics: camera, eufy, model, thingiverse, stl, Camera, reference
2
2.0
Jan 5, 2021
01/21
by
Harv Young (heyharvs)
data
eye 2
favorite 0
comment 0
Eufy 11s robot vacuum needed a nice wall mount for the remote. The docking station on the floor has a place for the remote to sit. But seriously, what's the point of bending down to get a remote on the ground? Took me 3 tries to get the profile of the remote right. It's not prefect, but pretty darn close. This is modeled in Fusion 360, printed with supports (for the lip). There are no screw holes as this is meant to be mounted with double sided mounting tape. There is enough surface area to...
Topics: stl, holder, mount, vacuum, Household, thingiverse, eufy, 11s
0
0.0
Apr 19, 2022
04/22
by
Ethan Gorelick (vanillanesquik)
data
eye 0
favorite 0
comment 0
Replacement cover for bearing on the roller brush. My robotic vacuum started to make loud noise after the cover was worn down from use. No supports needed, just print in PLA or PETG. I printed mine in PLA and will update if it fails again to report on how long it lasts.
Topics: Replacement Parts, bearing, thingiverse, 15c, eufy, stl, vacuum
