0
0.0
Aug 17, 2022
08/22
Aug 17, 2022
by
Jesse Evans (jbuck20)
data
eye 0
favorite 0
comment 0
This is a remix of someone else's design that I modified to work with the exoslide system. Drops the front bar by around 100mm.
Topics: stl, ExoSlide, ender_5_plus, thingiverse, 3D Printing
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Albert Sanchez (bert4925)
data
eye 0
favorite 0
comment 0
This is a Hero Me Gen 6 Gantry+Base Combo specifically for Ender 5 printers using Exoslides with a MicroSwiss Direct Drive bracket. This is inspired from this base that I used with HMG5: https://www.thingiverse.com/thing:4649222 I essentially took the same mounting points and combined it with the HMG6 base and made a few minor adjustments to reduce material. Also, I am using the BLTouch Wing STL found in the same link above. For firmware probe offset I am using { -55, -16, 0}. My z-probe offset...
Topics: MSDD, HMG6, Exoslide, Ender 5, Cooling Mod, stl, 3D Printer Parts, thingiverse, Exoslide MSDD
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Peter Solomon (psdesign)
data
eye 0
favorite 0
comment 0
Print this simple file and insert 4 M3 heat press inserts into the 4 outer pilot holes. Mount to the Exoslide with 3 central M4 screws. Screw MUTANT Fixed Plate to the Mount with 4 M3 screws Ready to go!
Topics: 3D Printer Accessories, Wham_Bam_Mutant, Wham_Bam, ExoSlide, Wham_Bam_Systems, stl, thingiverse,...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Timothy Lavelle (InfidelProps)
data
eye 0
favorite 0
comment 0
Modelled and printed this Exoslide Wire guide for my Ender 5+ with a Hemera Hotend kit. The Exoslide is great upgrade for any 3D printer, but without proper wire management, the lose cables catch on the belt and can times cause the printer to skip. This wire guide helps keep the cables away from the belts and allows easy continuous movement of your PLA.
Topics: 3D Printer Accessories, Ender, ExoSlide, hemera, e3d_hemera, ender_5_plus, stl, thingiverse,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Roy Weller (Yorrellew)
data
eye 1
favorite 0
comment 0
This is an D8 (8 sided) die that can role! Simply slide the main pieces together and then gluing the numbers in place with a little super glue! this is V1, a single piece version might be possible in future!
Topics: exotic, die tower, dungeons, miniatures, dice tower, miniture, round, dungeons_and_dragons, stl,...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Chad Connor (Sloper0208)
data
eye 1
favorite 0
comment 0
This was my design to combine the Z axis brace and extruder bracket into one mount for the ExoSlide setup. The mount for the extruder is rotated to be parallel to the Z axis travel path, which puts the extruder itself on the backside of the printer compared to the normal orientation.
Topics: 3D Printer Parts, Ender_3, thingiverse, extruder, Ender_3_Pro, creality_ender_3, stl, Creality,...
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
B&B Tech (damanbaird)
data
eye 2
favorite 0
comment 0
prototype for a carriage to run on 2020 extrusion or 20mm x 20mm carbon fiber, etc.
Topics: 3D Printer Parts, thingiverse, 2020, knockoff, clone, slide, extrusion, ExoSlide, stl, carbon
2
2.0
Oct 29, 2021
10/21
Oct 29, 2021
by
Pyro Fox (Pyro_Fox)
data
eye 2
favorite 0
comment 0
This is a simple remix of the Exoslide Hemera blower mount. All I've done here is remove the chamfers on the front face to reduce overhangs so close to the heatbed, and then added some internal chamfers in the air duct so provide more bridge expansion room when printing the back of the cooler (see photos). I havent printed this yet so your your mileage may vary. I needed more customizations than this for my setup like a spot for threaded inserts for my drag chain that I may upload later. Enjoy!
Topics: thingiverse, hemera, 3D Printer Parts, stl, 5015, ExoSlide
3
3.0
Oct 15, 2021
10/21
Oct 15, 2021
by
Spencer Hanson (FozzyMaker)
data
eye 3
favorite 0
comment 0
A simple mount to attach the Biqu H2 to the ExoSlide 40p. I'll be printing my part from ABS and then vapor smoothing to increase layer adhesion. Requests for having myself do a modification or remix for another printer part will most likely be ignored. Step files for the ExoSlide can be found on the ExoSlide website if that helps anyone in their design process.
Topics: thingiverse, BTT, ExoSlide, stl, mount, BIQU_H2, biqu, 3D Printer Parts, bigtreetech
3
3.0
Oct 15, 2021
10/21
Oct 15, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
Ender 3 power supply mount, works with ExoSlide Ender 3 XZ kits with require the power supply to be moved to clear the right side ExoSlide. Works with Ender 3 and Ender 3 Pro model power supplies (Cheng Liang and Meanwell). Mounts to power supply with a M4x8 button head cap screw. Can use 4x M5x8 bolts and T-nuts to mount to the 4040 frame.
Topics: power_supply, thingiverse, ExoSlide, stl, Ender3, Ender_3, 3D Printer Parts, power_supply_mount
4
4.0
Oct 14, 2021
10/21
Oct 14, 2021
by
Dallas Book (daabooman)
data
eye 4
favorite 0
comment 0
I built these Brackets for my Ender 5 Plus. I upgraded to the MicroSwiss all metal Hotend and the Exoslide Linear slides. I also attached a drag chain to the Rear of the X axis to carry the wires. I built an enclosure around my Ender 5 Plus. After do that I placed my Spools in a Zip Lock container (with Filament drier inside) on top of the case. Then, I just routed the filament from the Container through the top of the Case with Capricorn tubing (Stopping just inside the Case) This Bracket is...
Topics: stl, 3D Printer Parts, thingiverse, ExoSlide
2
2.0
Sep 13, 2021
09/21
Sep 13, 2021
by
Emerson Corder (EmmyShain)
data
eye 2
favorite 0
comment 0
This is a remix of [ExoSlide Hemera Mount](https://www.exoslide.com/universal-CAD "ExoSlide Universal Mounts"). I needed a mount for my TH3D EZABL and and wire loom support to help with that giant loom the Ender 5 Plus is doomed with. Its not perfect as the fit and finish is off (Chamfer) on a couple spots that I couldn't figure out. I included the STEP file for anyone who needs to change it or can fix those spots! I printed this using my Mono X resin printer, but I cant see why you...
Topics: stl, ender_5_plus, thingiverse, Exoslide, Creality_Ender_5_Plus, mount, extruder_mount, Hemera,...
2
2.0
Aug 22, 2021
08/21
Aug 22, 2021
by
dave wilson (woodwaker)
data
eye 2
favorite 0
comment 0
I needed adapters for the X-change system to mount on my Ender 5 and Ender 5 Plus that has the ExoSlide system. I also needed it to mount my OmniaDrop direct drive hot ends. After a lot of tinkering and trial and error this is what I have. The X-change cover center bowden is a remixed file of the original by Teaching Tech. A great design that i just added to https://www.thingiverse.com/thing:4888736 A mount for the ExoSlide that has a 20x20 mm mounting pattern for the X-change master adapter. X...
Topics: OmniaDrop, X-Change, stl, thingiverse, 3D Printer Parts, ExoSlide
2
2.0
Aug 22, 2021
08/21
Aug 22, 2021
by
Raniel Endrino (Poinkiee)
data
eye 2
favorite 0
comment 0
Designed this Biqu H2 mount for exoslide motion system, installed on my ender 5 plus Walls 4 and infill 40%
Topics: ender5plus, BIQU_H2, stl, thingiverse, 3D Printer Parts, ExoSlide
2
2.0
Jul 22, 2021
07/21
Jul 22, 2021
by
dayton da (CryptoThings)
data
eye 2
favorite 0
comment 0
I've adapted this mod to work with Exoslides. You must however, grind out the back of the exoslide 40 to allow a little more space for the belt to pass behind the slide (DO THIS AT YOUR OWN RISK). This piece is designed to create a center hole on the Exoslide 40. Items needed: 4 - Ultrasert II M3x3.8 heat insert. 8 - M4x10 countersunk screws 2 - Exoslide belt brackets ( https://www.exoslide.com/products/hardware/bracket-belts-kit ) 1- Pack of belt clamps (...
Topics: 3D Printer Accessories, ExoSlide, stl, ender 3 belt, thingiverse
4
4.0
Jun 12, 2021
06/21
Jun 12, 2021
by
Cody Roper (croper113)
data
eye 4
favorite 0
comment 0
This is an all-inclusive extruder mount for the Bondtech BMG-X2 dual direct drive extruder on a Exoslide motion system. This fits the BMG-X2 model designed for the 18 mm c-c version of the E3D Chimera hotend (including the TH3D Tough clone), although it may fit the 20 mm version as well.
Topics: Geared_Extruder, direct_drive, bondtech, E3D_Chimera, bondtech_bmg, bmg_x2_cooling, 5015_fan_duct,...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Clinton Fees (ClutchXT)
data
eye 3
favorite 0
comment 0
Cable attachment point for Hemera installed on Exoslide rails, this tower will bolt to the Exoslide top Carriage with two m4 x 20mm bolts. I made a skeletonized tower as well but didn't much care for how it turned out, I included the step file with the upload, feel free to edit it for your needs
Topics: wire_holder, 3D Printer Parts, thingiverse, hemera, ExoSlide, stl
3
3.0
Jun 10, 2021
06/21
Jun 10, 2021
by
Jared Brodeur (DaBrode)
data
eye 3
favorite 0
comment 0
This is a mount for the Winnsinn Dual Gear Extruder in a direct drive application. I recommend extending all screws to the next length available to install this kit although is seems the originals will catch ok. This pairs well with my Ultimate Filament Spool Holder also on Thingiverse... https://www.thingiverse.com/thing:4377387 Enjoy!
Topics: thingiverse, ender_5_upgrades, ender_5, ender_5_plus, ExoSlide, Creality_Ender_5,...
4
4.0
May 20, 2021
05/21
May 20, 2021
by
Juan Rosario (Sindarius)
data
eye 4
favorite 0
comment 0
These are plates for mounting the E3D Hemera/Hermes Extruder with the Quick Tool Changer. The ExoSlide version is shorter since there is no bottom wheel and uses my modified quick tool change mount.
Topics: ExoSlide, thingiverse, 3D Printing, hermes, hemera, e3d_hemera, stl, e3d_hermes
4
4.0
May 20, 2021
05/21
May 20, 2021
by
Giles Medlicott (ExoSlide)
data
eye 4
favorite 0
comment 0
Fan duct for a 4010 blower to work with the E3D Hemera Extruder in direct drive setup. Mounts to the to the bottom Exoslide in a the four ExoSlide carriage using M4x14 bolts (2x). Works with Creality Ender 3, 5, and CR10 ExoSlide kits https://exoslide.com/products/kits
Topics: Blower, 3D Printer Parts, blower_duct, 4010_radial_blower, thingiverse, blower_fans_mount,...
3
3.0
May 20, 2021
05/21
May 20, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
Direct drive extruder mount for the E3D Hemera extruder. The bracket mounts to middle slide in a four ExoSlide carriage. Designed for the ExoCube printer: https://exoslide.com/exocube-printer The bracket can also mount to the ExoSlide Ender 3, Ender 5, or CR10 kits.
Topics: extruder, Direct_extruder, direct_drive, direct_drive_extruder, 3D Printer Parts, thingiverse, E3D,...
3
3.0
May 20, 2021
05/21
May 20, 2021
by
Kenny Elgin (kenny8282)
data
eye 3
favorite 0
comment 0
EZ ABL 18mm mount for EXOSLIDE
Topics: thingiverse, DIY, ExoSlide, EZABL, stl
5
5.0
Apr 27, 2021
04/21
Apr 27, 2021
by
Michael Carson (MTCarson)
data
eye 5
favorite 0
comment 0
This is an E3D Hemera mount, inspired by Joe Casha's mount for the Ender, Tevo, Etc. Very solid mount and easy to put together. V5 makes the BLTouch mount more rigid and lowers it to give about -2.3mm offset for the print nozzle. Printed w/ 50% infill with 5 wall layers, but I'm sure it would be fine with thinner walls and lower infill. I just wanted to be sure the mount would be stiff. I did turn supports on for the Hemera mounts. Depending upon your printer, you may not need them. Be sure to...
Topics: 3D Printers, thingiverse, e3d_hemera, ExoSlide, hemera, stl, e3dhemera, Hemera_mount
4
4.0
Apr 27, 2021
04/21
Apr 27, 2021
by
Jason Stahl (jasonlstahl)
data
eye 4
favorite 0
comment 0
Made this to adapt a delta carriage made to mount on linear rail hole pattern. M4 counter sunk holes for Exoslide and 20x20 hole pattern to mount attachments.
Topics: thingiverse, ExoSlide, adapter, linear_motion, 3D Printer Parts, stl
3
3.0
Apr 20, 2021
04/21
Apr 20, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
5015 blower duct for an E3D Hemera extruder that is mounted to an ExoSlide carriage. The Hemera mount is also posted on Thingiverse. When installed, it works best with a fan speed of around 50% for PLA.
Topics: thingiverse, blower_duct, 5015_blower, stl, 3D Printer Parts, E3D, fan_duct, hemera, 5015_fan_duct,...
3
3.0
Apr 4, 2021
04/21
Apr 4, 2021
by
Gerald Jones (jonzynator)
data
eye 3
favorite 0
comment 0
I bought the version 3 exolide kit for my ender 5 and the extruder alignment was off about 9.5mm. I adjusted and made it work for my printer. Figured I should share it for anyone else interested in using this file.
Topics: thingiverse, 3D Printer Parts, ExoSlide, Ender5, stl
3
3.0
Apr 4, 2021
04/21
Apr 4, 2021
by
Rob Collie (Robcollie)
data
eye 3
favorite 0
comment 0
Note: I need to make adjustments to this model before it will fit correctly. I forgot to account for the screw heads that connect the ExoSlide components to each other in the measurements I swapped out my stock bed carriage for a lighter one and took the opportunity to switch over to ExoSlide 40 instead of the stock wheels You might not need supports, but I printed them top down with supports just in the bolt holes. You may not need to use as many screws to connect the adapter to the ExoSlide,...
Topics: thingiverse, CR-10, carriage, 3D Printer Parts, 2040, stl, ExoSlide
4
4.0
Apr 1, 2021
04/21
Apr 1, 2021
by
Jeff Story (JStory987)
data
eye 4
favorite 0
comment 0
I had installed the ExoSlide XZ kit on my Ender 3, and I wanted to be able to upgrade to the E3D Titan Aero system. There really wasn't a way to use these things together, so I created this. I've installed it on my Ender 3, and I'm in the process of finishing the wiring. I used PETG for the print, long-term, we'll have to see if it can stand up to the heat. - Exoslide frame mount should be printed with the side that faces the ExoSlide bracket facing down. I was able to print with no rafts, no...
Topics: titan_aero, titan, thingiverse, 3D Printer Parts, E3D_Titan_Aero, stl, ExoSlide
4
4.0
Apr 1, 2021
04/21
Apr 1, 2021
by
Giles Medlicott (ExoSlide)
data
eye 4
favorite 0
comment 0
BLTouch mount for ExoSlides. It mounts to the bottom slide of a four slide hotend carriage with two M4x18 bolts. Used on the ExoCube. Also fits the ExoSlide Creality kits.
Topics: BLTouch, thingiverse, 3D Printer Parts, Creality, Creality_CR-10, bed_leveling, ExoCube,...
4
4.0
Mar 31, 2021
03/21
Mar 31, 2021
by
Kell Manglo (Tripl3troubl3)
data
eye 4
favorite 0
comment 0
Remixed for a aluminum direct drive I bought from Trianglelab on Aliexpress.
Topics: Ender 3, thingiverse, 3D Printer Parts, ExoSlide, Direct Drive, stl, BMG
4
4.0
Mar 31, 2021
03/21
Mar 31, 2021
by
Kyle L (Kylellrc)
data
eye 4
favorite 0
comment 0
Here is a more simplistic and less bulky version of the V1 Exoslide E3d v6 bowden mount design. The BLTouch is still 20.5mm away from the nozzle and triggers when the nozzle is 1.5mm from the build plate but the z probe offset may vary. Hardware Needed x6 M4x12mm Button Head (ExoSlide Mounting) x7 M3x25mm Socket Head (To connect the two half's and 40x20mm cooling fan mounting) x2 M3x6mm Socket Head (To secure BLTouch) x4 M3x16mm Socket Head (40x10mm fan mounting) x3 M3x12mm Socket Flat Head...
Topics: 3D Printer Accessories, stl, ExoSlide, thingiverse
4
4.0
Mar 26, 2021
03/21
Mar 26, 2021
by
Giles Medlicott (ExoSlide)
data
eye 4
favorite 0
comment 0
Direct drive extruder mount for Bondtech BMG, which mounts to the ExoSlide carriage (top slide) that uses the aluminum hotend bracket (on middle slide) from any of the ExoSlide Ender 3, Ender 5, or CR10 kits: https://exoslide.com/products/kits The bracket mounts using M4x14 bolts (2x) to the top Exoslide in the four ExoSlide carriage
Topics: Bondtech_BMG_extruder, Ender3, ExoSlide, bondtech, Bondtech_extruder, CR10, creality_ender_3,...
3
3.0
Mar 26, 2021
03/21
Mar 26, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
Fan duct for a 5015 blower, to mount to the to the bottom Exoslide in a the four ExoSlide carriage using M4x14 bolts (2x). Used on the ExoCube printer: https://exoslide.com/exocube-printer You can use it on the Creality hotends with ExSlide carriages, though the stock metal heatsink fan shroud will not fit.
Topics: stl, thingiverse, 5015_fan_duct, fan_duct, 5015, blower, 5015_blower, 3D Printer Parts, duct_fan,...
3
3.0
Mar 26, 2021
03/21
Mar 26, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
Fan duct for Creality (and similar) hotends, which mounts to the ExoSlide carriage (bottom slide) that uses the aluminum hotend bracket (on middle slide) from any of the ExoSlide Ender 3, Ender 5, or CR10 kits: https://exoslide.com/products/kits This design keeps the stock metal hotend shroud. It uses the stock 4010 blower and bolts (3x) The duct mounts using M4x14 bolts (2x) to the bottom Exoslide in the four ExoSlide carriage
Topics: Ender3, CR10, Blower, creality_ender_3, fan_duct, Ender_3, Ender_5, Exoslide, stl,...
4
4.0
Mar 22, 2021
03/21
Mar 22, 2021
by
dayton da (CryptoThings)
data
eye 4
favorite 0
comment 0
A little adapter mount I whipped up for a Flex3drive to attach to my exo-slide carriage. Compatible with Hero Me Gen 5. The walls are for added support. will have about 30mm of ptfe from extruder to hotend This is installed on a ender5+ no guarantees it will adapt well to other models.
Topics: hero me, flexdrive, stl, slide, ender 5 plus, flex3drive, exo, 3D Printer Extruders, exo-slide,...
3
3.0
Mar 19, 2021
03/21
Mar 19, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
Direct drive extruder mount for MK8 extruders (Creality and similar), which mounts to the ExoSlide carriage (top slide) that uses the aluminum hotend bracket (on middle slide) from any of the ExoSlide Ender 3, Ender 5, or CR10 kits: https://exoslide.com/products/kits The bracket mounts using M4x14 bolts (2x) to the top Exoslide in the four ExoSlide carriage
Topics: extruder_mount, Ender3, thingiverse, Ender5, Creality_Ender_5, CR10, 3D Printer Parts, stl,...
3
3.0
Mar 19, 2021
03/21
Mar 19, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
Direct drive extruder mount for the Bondtech BMG extruder using the E3D V6 hotend. The bracket mounts to middle slide in a four ExoSlide carriage. Designed for the ExoCube printer: https://exoslide.com/exocube-printer The bracket can also mount to the ExoSlide Ender 3, Ender 5, or CR10 kits.
Topics: direct_drive, bondtechbmg, Bondtech_BMG_extruder, Bondtech_extruder, direct_drive_wheel,...
3
3.0
Mar 17, 2021
03/21
Mar 17, 2021
by
Kenny Elgin (kenny8282)
data
eye 3
favorite 0
comment 0
I have modified this for Slice Engineering Mosquito hot end. I moved up the duct 1mm from original to sit .5mm above slice nozzle. Also added EZ_ABL Mount. Sits 50mm Offset of Nozzle. Original Mount can be found here: https://www.thingiverse.com/thing:3983560 Duct Here: https://www.thingiverse.com/thing:3983456
Topics: Creality, mosquito, Slice_engineering, Ender, stl, ExoSlide, thingiverse, BMG, DIY
5
5.0
Mar 15, 2021
03/21
Mar 15, 2021
by
Michael Davis (mk717)
data
eye 5
favorite 0
comment 0
Haven't tested this yet, ExoSlides are still in the mail. I am a complete beginner at 3d modeling, so I have no idea how well this will work. Step file is included, feel free to make it better.
Topics: thingiverse, E3D, 3D Printer Parts, stl, ExoSlide, EZABL_PRO, E3D_Hemera_Mount
4
4.0
Mar 15, 2021
03/21
Mar 15, 2021
by
steve mclean (McDLT_ca)
data
eye 4
favorite 0
comment 0
ebder 5 plus microswiss mount setup. 3 screws mounting. you need 2xm4x60 2m20x4 and one screw and nut from an original roller wheel. this braket is used to be mounted under the cariage. each exoslide on the y axe must be mounted as shown with the end stop for the y axes mounted extrerior right. the x axes must have the straps mounted on the rear side of the 20x20, engine facing down.
Topics: thingiverse, 3D Printer Parts, stl, ExoSlide, bracket
4
4.0
Mar 13, 2021
03/21
Mar 13, 2021
by
Cody Roper (croper113)
data
eye 4
favorite 0
comment 0
Railcore II Y carriage for Dual extrusion using the Bondtech BMG-X2 EXTRUDER and water cooled E3D Chimera. 2x GDStime Technology 24V 0.1A 40mm blowers for cooling. I use a Omron E2B-M12KN08-WP-C1 2M inductive probe with this. You need 4x60mm M3 for belt tightening
Topics: E3D_CHIMERA, thingiverse, EXOSLIDE, RAILCORE2, BONDTECH_BMG_EXTRUDER, 3D Printer Extruders, stl,...
4
4.0
Mar 10, 2021
03/21
Mar 10, 2021
by
Vincent Teune (Cobalt_Prime)
data
eye 4
favorite 0
comment 0
This is a mount for the titan family of extruders from E3D and the ExoSlide System. it can be used with either the 2020 ExoSlide or the 2040 and includes a mount for the BL Touch that is positioned according the instructions from Antclabs, and removable fan mount for a 40mm Blower. all the parts are pre-oriented for optimal printing. to mount everything to the 2020 ExoSlide you will need 8 m4x12 (extruder and timing belt retainer), 2 m3x8 (bl touch), and 2 m2x8 (fan mount) cap screws. for the...
Topics: Titan_Extruder, BL_Touch, ExoSlide, stl, thingiverse, e3d-titan, bltouch_mount, Extruder, titan, 3D...
3
3.0
Mar 5, 2021
03/21
Mar 5, 2021
by
Giles Medlicott (ExoSlide)
data
eye 3
favorite 0
comment 0
5015 blower duct for an E3D Hemera extruder with the Volcano nozzle mounted to an ExoSlide carriage. When installed works best with 100% fan speed on PLA
Topics: E3D, stl, 5015_fan_duct, blower_duct, hermera, 5015_blower, E3D_Volcano, ExoSlide, 3D Printer...
4
4.0
Jan 19, 2021
01/21
Jan 19, 2021
by
Chris Jones (cjonesmcse)
data
eye 4
favorite 0
comment 0
This is a remix of a remix for use with Hero Me Gen 5 fan ducts. It may work with other duct systems, but I have only tried it with HMG5. The Exoslide Direct Drive mount for the Ender 5 Plus put my extruder around 10mm to the right and 8mm below the hot end on my machine when using HMG5 fan ducts. Fixing this required elongating and expanding the part and shifting the mounting holes. Elongating it also caused the need for a cut out for the left X-axis belt connector.
Topics: 3D Printer Accessories, Ender 5 Plus, thingiverse, Hero Me Gen 5, ExoSlide, direct-drive, stl
3
3.0
Jan 8, 2021
01/21
Jan 8, 2021
by
dave wilson (woodwaker)
data
eye 3
favorite 0
comment 0
This version of the quick change mount will accept the OmniaDrop that has the quick change feature as part of the main body. I designed this accept the plug directly from the new OmniaDrop. This is mounted on my Ender 5 Plus with the Exoslide kit. This is an ongoing set of designs based on the great idea and work of ProperPrinting https://www.thingiverse.com/thing:3369444 and from the design made my Max Arnold at Dropeffect. See also the original mounting system...
Topics: stl, quick_change, 3D Printer Extruders, OmniaDrop, thingiverse, ExoSlide
3
3.0
Jan 7, 2021
01/21
Jan 7, 2021
by
dave wilson (woodwaker)
data
eye 3
favorite 0
comment 0
A modification of the Exoslide Quicktool Change base by Sindarius to mount the OmniaDrop direct drive hot end with an EZABL. I also modded the FT-5 carriage back w/timing belt holders by dbfrompw https://www.thingiverse.com/thing:2560199 to create a X carriage belt mount, because I had some difficulty with the supplied clips. and also included are X and Y stops. All of this work is based on the excellent design by ProperPrinting https://www.thingiverse.com/thing:3369444. This allows for the...
Topics: stl, direct_drive_extruder, Exoslide, 3D Printer Parts, OmniaDrop, thingiverse
4
4.0
Jan 4, 2021
01/21
Jan 4, 2021
by
David Wertz (DVW1169)
data
eye 4
favorite 0
comment 0
This is just an adjusted version from the original mount to add stock Ender 5 Plus BL Touch.
Topics: stl, Ender 5 Plus, 3D Printer Parts, thingiverse, ExoSlide, hemera
