2
2.0
May 1, 2021
05/21
by
Sascha Göttgens (JetHunter)
data
eye 2
favorite 0
comment 0
Hier mal eine Sammlung für den Zander zum Drucken.
Topics: stl, FPV_freestyle, thingiverse, 3D Printer Parts
2
2.0
Jun 11, 2021
06/21
by
Albert Patrick David (kulotFPV)
data
eye 2
favorite 0
comment 0
F3evo Brushed + 8520 coreless brushed motors + 65mm kingkong props
Topics: thingiverse, FPV_freestyle, f3evo, brushed_quad, DIY, stl
2
2.0
Apr 1, 2021
04/21
by
Stev Strass (Stivinatorium)
data
eye 2
favorite 0
comment 0
Just developed a decent fpv racing drone with a massive 4S 4000ma / h Lipo. I used a 0.8mm nozzle so I can print the motor holder in just 1 hour in case I crash. Hope someone will have fun with it, at least I have fun with this thing. You can also mount a shorter Lipo and put a GoPro on it. I glued a GoPro mount to my battery. Works great too!
Topics: thingiverse, fpv, Hobby, FPV_freestyle, fpv_racing, stl, drone
3
3.0
Apr 1, 2021
04/21
by
Danilo Selvaggi (Bladan)
data
eye 3
favorite 0
comment 0
print it in vertical (rotated 90 degree) to have much better resistance. Use support and tpu material
Topics: thingiverse, fpv, FPV_freestyle, camera mount, scretch_X5, DIY, stl
2
2.0
Jan 8, 2021
01/21
by
Adam Wadkins (Adamwad)
data
eye 2
favorite 0
comment 0
TBS Source V Assasin Bug Mohawk for turtle mode
Topics: R/C Vehicles, stl, drone_racing, thingiverse, FPV_freestyle, drone
5
5.0
Mar 16, 2021
03/21
by
A Svingos (blazefpv)
data
eye 5
favorite 0
comment 0
This is a quick and simple arm foot (hand glove motor shoe?) I made for the AimDroix Blazer 225 and similar arms. It was designed around the motors I fly (KDE 2306XF) but should work for most motor bolt patterns.
Topics: FPV_freestyle, aimdroix, stl, thingiverse, drone_racing, R/C Vehicles
1
1.0
Oct 29, 2021
10/21
by
T G (TAGE_FPV)
data
eye 1
favorite 0
comment 0
This is a custom gopro lite mod. Has sufficient space for an internal iflight bec, uses the buttons (AND ONLY THE BUTTONS) from betafpv for the gopro 5,6,7 and more importantly lets you use the stock lense mounting system. It uses the original front face of the gopro 5,6, and 7 making it incredibly durable. This is because the firewall that gopro uses is made from metal and works great for heat disspation along with structural strength. Using an iflight bec you can get the necessary 5v input on...
Topics: thingiverse, gopro_naked, betafpv, stl, FPV_freestyle, Camera, gravityloss, goprolite
3
3.0
Apr 20, 2021
04/21
by
Dylan Bish (DillyTheBish)
data
eye 3
favorite 0
comment 0
A gopro mount for the FlightClub Bangkok frame, with an immortal T antenna mount on the back.
Topics: thingiverse, drone, stl, freestyle, R/C Vehicles, bangkok, FPV_freestyle, flightclub
4
4.0
Mar 2, 2021
03/21
by
Tyler Larimore (AllGravityIs)
data
eye 4
favorite 0
comment 0
works great!!
Topics: fpv, thingiverse, R/C Vehicles, Drones, stl, fpv_racing, FPV_freestyle
2
2.0
Apr 23, 2021
04/21
by
Benjamin Wolf (Arexz)
data
eye 2
favorite 0
comment 0
This is a simple mount for common Action Cams like DJI Osmo or GoPro Hero. It screws in with the top plate of the frame and reuses the same screws. Weight:
Topics: FPV_freestyle, fpv, CineWhoop, thingiverse, Diydrones, stl, R/C Vehicles, drone
2
2.0
Mar 18, 2021
03/21
by
Alan Ball (FlyingRobotZA)
data
eye 2
favorite 0
comment 0
This is the arm guard for the EchoQuad Freestyle frame. This is the left arm guard. To create the right arm guard you will need to mirror this in your slicer.
Topics: R/C Vehicles, echoquad, EchoQuad_Freestyle, thingiverse, Drones, FPV_freestyle, stl
2
2.0
Jun 10, 2021
06/21
by
David Palma (Xarhvid)
data
eye 2
favorite 0
comment 0
I'm a huge fan of iFlight products and I really like the iFlight Titan LH5 but this slammed quad is not made for HD (dji) so I modified the frame a little bit and designed some 3D print accessories for it. + This mod requires to cut the top carbon fiber plate, I did it easily with a Dremel tool. + In order to fit the DJI HD Unit you need to replace the stock standoffs - 2 X 25mm M3 Standoff (front):...
Topics: fpv, iflight_titan, thingiverse, R/C Vehicles, FPV_freestyle, iFlight, stl
3
3.0
Mar 22, 2021
03/21
by
Giles Clement (gilesclement)
data
eye 3
favorite 0
comment 0
Lifted GPS holder for the FR7 frame and BN-180/280/880 style GPS modules. Elevated GPS position for ground clearance so you're not bumping your navigational ass when landing. Interior space is 29x29mm. 6mm hole for VTX antenna.
Topics: gps, freestyle, stl, bn880, fr7, FPV_freestyle, R/C Vehicles, thingiverse
4
4.0
Mar 17, 2021
03/21
by
Krusty Clown (KrustyFPV)
data
eye 4
favorite 0
comment 0
Bumper for Amax Freestyle 3 u need M2x6 screws
Topics: FPV, Bumper, FPV_freestyle, stl, thingiverse, Amax, R/C Vehicles, Freestyle
2
2.0
May 1, 2021
05/21
by
julien eon (LaJulasse)
data
eye 2
favorite 0
comment 0
A vertical mount for the Insta360go2. The camera fits nicely and is firmly held inside. For insertion, start with the lens side, for extraction push the lens back out first.
Topics: stl, insta360go2, insta360, fpv_camera_mount, FPV_freestyle, thingiverse, R/C Vehicles
6
6.0
Jan 21, 2021
01/21
by
mücahit toygar (cahittt)
data
eye 6
favorite 0
comment 0
it looks nice
Topics: drone_racing, FPV_freestyle, thingiverse, fpv_racing, drone, tbs, 3D Printing, stl
2
2.0
Mar 25, 2021
03/21
by
Karl Thwaites (StringyMcStringface)
data
eye 2
favorite 0
comment 0
This is a snap in holder for a Lumineer AXii long range omni antenna 125mm for your goggles. Eg skyzone or fatshark. Not suitable for eg the ev800d. This holder keeps the antenna pointing up for best forward coverage. If your head keeps straight! Just push the antenna in and it should stay secure.
Topics: stl, fpv, R/C Vehicles, drone, thingiverse, Drones, FPV_freestyle, fpv antenna
2
2.0
Mar 18, 2021
03/21
by
chris talley (thetalleyway)
data
eye 2
favorite 0
comment 0
Mach 3 VTX stack tray, for either 20x20mm or 30.5x30.5mm. *EDIT: -after printing I found a few issues. I have fixed the issues and uploaded the fixed file (v3)
Topics: drone, fpv, vtx_mount, thingiverse, FPV_freestyle, 3D Printing, Mach_3, stl
3
3.0
Mar 25, 2021
03/21
by
regis blanc (poire)
data
eye 3
favorite 0
comment 0
AMAXinno freestyle 5'' new frame's shoes 2 version for each arm / 2mm thick & 1mm thick (base)
Topics: stl, fpv, R/C Vehicles, fpvfreestyle, thingiverse, FPV_freestyle, fpv_racer, Amax, AMAXinno
3
3.0
Mar 31, 2021
03/21
by
Felix Jordi (FelixJordi)
data
eye 3
favorite 0
comment 0
Designed to mount a Runcam 5 on the Lumenier QAV-R 2 SKITZO an angle of 25° it's inspired by: https://www.thingiverse.com/thing:3394881 i haven't printed it yet and it is at the beginning of the engineering process I will try to keep it updated
Topics: Skitzo, thingiverse, fpv, camera_mount, QAV-R, Hobby, FPV_freestyle, Lumenier, runcam, stl
2
2.0
Mar 25, 2021
03/21
by
Karl Thwaites (StringyMcStringface)
data
eye 2
favorite 0
comment 0
Print this in TPU. With supports everywhere. I will be doing my test print this weekend (11/10/19). Test videos to follow. Strap down with 3 cable ties. Strap in the runcam 5 with a velcro strap. Yes, it's a long print, lets hope it's worth it...
Topics: stl, R/C Vehicles, drone, thingiverse, FPV_freestyle, fpv_racing, drone_racing, kwad
3
3.0
Jan 7, 2021
01/21
by
duke vah (duke_vah)
data
eye 3
favorite 0
comment 0
Sub 250g quadcopter is needed for many of us who live in countries with restrictions. 4-inch quadcopters are becoming more popular these days because you can get them to fly longer, be under 250g, and even do freestyle. To keep the frame light and get rid of props in the FPV view, people have been designing deadcat style frames for such a long time. For example, grasshopper, FR7, and Dave_c frames. You can even name more 4-inch light frames became more popular by Dave_c who designed a great...
Topics: stl, Hobby, FPV_Frame, dji_air_unit, thingiverse, fpv, caddx_vista, FPV_freestyle
2
2.0
Mar 19, 2021
03/21
by
Chris Armstrong (Armschr)
data
eye 2
favorite 0
comment 0
This is a GoPro Mount for iFlight Titan HD Freestyle Frames. So far I've found that the DC5 and DC7 both use the same top-plate so you can use this mount for both. I used the same connector that the default GoPro mounts use to make this compatible with any GoPro and allow you to select the amount of uptilt you would like. You'll Have to buy a bolt and some longer screws for is. I found them at my local hardware store. If you found this useful, please donate what you think it is worth to my...
Topics: R/C Vehicles, gopro_session_mount, drone, fpv, iFlight, thingiverse, FPV_freestyle, stl
2
2.0
Mar 12, 2021
03/21
by
Donnie Vazquez (donnievaz)
data
eye 2
favorite 0
comment 0
Antenna mount for Lumenier QAV-R 2 Slam. Use TPU for best results.
Topics: Drones, Lumenier, thingiverse, QAV-R, drone_racing, R/C Vehicles, FPV_freestyle, stl
2
2.0
Oct 15, 2021
10/21
by
APHI FPV (aphi__FPV)
data
eye 2
favorite 0
comment 0
This is a remix of Chris Rosser's original 25° Hero 9 Mount from https://www.aos-rc.com/. Chris Rosser's original design already featured: - Super simple but secure slide-in of the GoPro Hero 9 with Lens on - Slots to fit the TBS ND-Filter Glasses - Accessible Buttons - Accessible Front Display I've added a few features: - This mount is now available in 5° steps all the way from 5-45° - These mounts now come with a cut out for the Hero 9's front tally light - On its back the tilt angle is...
Topics: thingiverse, Drone, stl, Other, AOS5, FPV_freestyle, racing_drone, drone_racing, Quadcopter, AOS5.5
2
2.0
Apr 5, 2021
04/21
by
Mat Foyle (CrunkleFloop)
data
eye 2
favorite 0
comment 0
A simple remix of the awesome ARS-5 V2.0) By https://www.thingiverse.com/Dave_C_FPV Shortened the length of the frame so all arms are equal length and shortened top-plate to fix. Haven't built and flown yet as waiting for parts to arrive.
Topics: thingiverse, R/C Vehicles, fpv frame, Drones, Quadcopter, stl, FPV_freestyle, drone frame
2
2.0
Mar 15, 2021
03/21
by
Luca Pelizzaro (Mrsuperpeliz)
data
eye 2
favorite 0
comment 0
Arms and front protection for Iflight Nazgul v1 Remember to reverse the arm potection in your slicer to be able to mount them both on the left or right side. Supports needed.
Topics: thingiverse, FPV_freestyle, nazgul, TPU, iFlight, R/C Vehicles, fpv, stl, drone, arm
3
3.0
Mar 19, 2021
03/21
by
paolo gnoni (Kerush)
data
eye 3
favorite 0
comment 0
Is a simple but very effective solution to install the immortal T and the lumenier axii v2 in all in one solution. Thanks to the flexible proprieties of tpu, can fit different frames. I designed especially for my astroX johnny 5 Please, if you like it and use it on your quad, post a picture. Cheers!
Topics: R/C Vehicles, tbs, thingiverse, FPV_freestyle, Tbs_crossfire, astroxjohnnyfpv, Lumenier,...
3
3.0
Mar 5, 2021
03/21
by
Emanuele Ricchi (ElektroZorkk)
data
eye 3
favorite 0
comment 0
support for antenna and buzzer
Topics: stl, R/C Vehicles, fpv 250, drone_racing, fpv drone, stingy, FPV_freestyle, thingiverse
2
2.0
Apr 27, 2021
04/21
by
Riley Mann (zeropt)
data
eye 2
favorite 0
comment 0
This is my latest design for a 2-inch micro FPV Quadcopter! It carries a Caddx Turtle V2 which is capable of onboard 1080p recording. The drone weighs a total of 78 grams without the battery and around 104 grams with a 3s 300mah LiPo strapped to it. I found this design to be controllable and fast both outdoors and indoors but it was designed more for outdoor flight. I've had a lot of fun with this model and I hope you do too if you decide to make one. I printed the prototype Prop Guards but the...
Topics: thingiverse, kwad, FPV_freestyle, caddx_turtle, stl, CADDX, R/C Vehicles, micro_quadcopter, fpv
2
2.0
Jan 7, 2021
01/21
by
EnderDaze (gsmetalart)
data
eye 2
favorite 0
comment 0
iFlight Chimera 4" with RunCam Hybrid, i needed to raise up the control board for the camera. partly to put some distance between it and the power cables running out the back of the drone, partly to place the cam cable up and over everything else. these are sturdy, printed flat they have a good amount of strength, they will mount to your frame using motor screws.
Topics: Chimera, R/C Vehicles, runcam, iFlight, stl, Runcam_Hybrid, thingiverse, fpv, FPV_freestyle, drone
2
2.0
Mar 25, 2021
03/21
by
Martin Mehus (RockNRollaxis)
data
eye 2
favorite 0
comment 0
Wall mount for the Mobula7, but should fit the Eachine Trashcan too. Easy to print with support. Simply slide the tinywhoop in from the top.
Topics: stl, R/C Vehicles, thingiverse, mobula7, fpv racing, Tinywhoop, tinywhoop_stand, fpv, fpv freestyle
0
0.0
Apr 19, 2022
04/22
by
Tobias Schulz (Oti97)
data
eye 0
favorite 0
comment 0
Hey, i designed these stickends to fit the M3 thread on my radiomaster TX12 gimbals. They screw on just like any other stickends and they are especially designed for flying thumbs but i think you could use them for pinching too. Happy flying/ 3d printing
Topics: thingiverse, FPV_freestyle, radiomaster, fpv_racing, Radiomaster_TX12, Gimbal, 3D Printing,...
2
2.0
Jun 7, 2021
06/21
by
William Trevine (wtrevine)
data
eye 2
favorite 0
comment 0
0.2mm clearance already considered. 3mm protection. Mirror in slicing to obtain the opposite direction. Designed to be installed under the arm. I accept suggestions!
Topics: droneracing, fpv, drone, thingiverse, wikidrone, Diydrones, stl, stx225, flexible, Hobby,...
2
2.0
Mar 26, 2021
03/21
by
kiks fpv (kiks_fpv)
data
eye 2
favorite 0
comment 0
Gopro 5/6/7 tpu mount for The Squirrel, a new 5" freestyle frame available at Armattan Productions : https://armattanproductions.com/pages/kit_detail/2490
Topics: stl, fpv, R/C Vehicles, fpv_camera_mount, thingiverse, FPV_freestyle, FPV_Frame, GoPro_Mount
2
2.0
Jan 6, 2021
01/21
by
Ted Herman (ScrapHeapInd)
data
eye 2
favorite 0
comment 0
In an attempt to improve my 5in quad design, I designed these landing skids. They offer a fair amount of energy absorption for a rougher landing. https://youtu.be/aGeQMjmVV-8 You will need to print 2 as uploaded and mirror 2 in your slicer. Based on 16mm centers. If you need 19mm, they need to be beefed up. I can email you a .stp or a FreeCAD file for modification. These will give you ground clearance for Matek 3901 Lidar as well. (20mm plus mount) For my original design, see:...
Topics: R/C Vehicles, stl, Quadcopter, freestyle, Landing_Gear, thingiverse, fpv, Landing_Skids,...
2
2.0
Apr 2, 2021
04/21
by
Damia Sroca (00015957)
data
eye 2
favorite 0
comment 0
Pigtail holder and XT60 holder all in one for the Amaxinno Freestyle 5' inches frame
Topics: xt60_holder, pigtail_mount, thingiverse, XT60, R/C Vehicles, pigtail, FPV_freestyle, AMAXinno, stl,...
2
2.0
Jan 7, 2021
01/21
by
EnderDaze (gsmetalart)
data
eye 2
favorite 0
comment 0
iFlight Chimera 4" immortal T Mount for underneath the body. makes the possibility of a clash of props almost impossible. For my Chimmy i used the JHEMCU F411 FC which mounts diagonally. this ant.mount matches that hole spacing and holds the antenna really well. also, low profile, doesnt need to be TPU and looks cool too
Topics: Chimera, R/C Vehicles, iFlight, stl, thingiverse, fpv, TBS_Immortal_Antenna, Tbs_crossfire,...
0
0.0
Apr 20, 2022
04/22
by
Tobias Schulz (Oti97)
data
eye 0
favorite 0
comment 0
Hello, i´ve designed a mount for my Insta360 Go Mount, for the EP1 Antenna and a UFL-SMA adapter. You can find all things in this Thingi. There are two holes in the camera mount where i attached it with two cable ties to the top plate because there are only two screws on the frame in this place (shown in picture 2). Skids: https://www.thingiverse.com/thing:5188157 Insta360 Go Mount: https://www.thingiverse.com/thing:4359372
Topics: fpv, thingiverse, FPV_freestyle, darwinfpv, fpv_racer, babyape, 3D Printing, fpv_camera_mount, stl,...
1
1.0
Apr 20, 2022
04/22
by
kevo fpv (kevo777)
data
eye 1
favorite 0
comment 0
This is a Remix from LordGG ( https://www.thingiverse.com/lordgg/designs ) specially made for the QAV-S Frame. (also for the Joshua Bardwell edition) It has 25 degrees. If you wanna see this Mount in action check out my Youtube Channel https://www.youtube.com/c/kevofpv Cheers!
Topics: dji, fpv, thingiverse, FPV_freestyle, dji_fpv, 3D Printing, fpv_camera_mount, fpv_camera, stl
4
4.0
Mar 5, 2021
03/21
by
Alejandro sanchez cabezas (alemudi)
data
eye 4
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0Rg0PSwvWah
Topics: xioami yi cam, 3D Printing, soporte camara, stl, freestyle, frame grx, grx, FPV_freestyle,...
2
2.0
Mar 15, 2021
03/21
by
Erik Pettersson (Snille)
data
eye 2
favorite 0
comment 0
This is a redesign of the base plate for the GoPro holders for the Mr. Croc frame to fit the CineSplore frame. You can just move the GoPro (in it's mount) between the base plates to switch frames. Visit the original [Flywoo Mr. Croc parts](https://www.thingiverse.com/thing:4287814) to find the GoPro mounts that fits this base plate.
Topics: GoPro, cinesplore, camera_mount, thingiverse, baseplate, Quadcopter, quad, R/C Vehicles, fpv, stl,...
2
2.0
Mar 2, 2021
03/21
by
Brent Collier (BMC3D)
data
eye 2
favorite 0
comment 0
- 30 degree Hero8 mount - 30 degree Session mount - Front bumper - Arm guards - Long range antenna mount (gps/sma/immortal) - SMA/RX antenna mount Prints are available for purchase here: https://bmc3d.co/products/rotor-riot-cl1-accessory-set
Topics: CL1_Frame, thingiverse, stl, RotorRiot, FPV_drone, drone, R/C Vehicles, cl1, FPV_freestyle, fpv,...
4
4.0
Mar 4, 2021
03/21
by
Casey Holmes (caseyjholmes)
data
eye 4
favorite 0
comment 0
Step file and STL files for my Flying Squirrel Freestyle Drone frame. Please post a make if you cut one from carbon fiber or print one! Enjoy! -Casey
Topics: stl, R/C Vehicles, fpv_racer, frame, FPV_Frame, fpv, drone, Quadcopter_Frame, FPV_freestyle,...
3
3.0
Mar 9, 2021
03/21
by
Jeff Thompson (Dcdesigns)
data
eye 3
favorite 0
comment 0
I decided to make an under slung version with a tpu canopy. It is designed to have threaded inserts put into the tpu with a soldering Iron. It still has the 3 20x20 stack mount points in the unibody. Intended to have the Runcam split mini 2 or Caddx Turtle mini. It will fit 7 to 14 mm motor mounting. The tpu canopy has a sma mounting for the ease of mounting stubby antennas. I have also put dual rx atenna tubes into the canopy. When installing the m3 threaded inserts into the tpu push them in...
Topics: multicopter, fpv_racer, R/C Vehicles, stl, thingiverse, Quadcopter, FPV_freestyle, multirotor,...
4
4.0
Mar 2, 2021
03/21
by
Tyler Larimore (AllGravityIs)
data
eye 4
favorite 0
comment 0
perfect gopro mount
Topics: drone_racing, thingiverse, GoPro_Mount, gopro_session_mount, R/C Vehicles, stl, drone, FPV_freestyle
2
2.0
Jan 6, 2021
01/21
by
Krózser Dániel (Daniel0915)
data
eye 2
favorite 0
comment 0
This is a remix of the DJI OSMO ACTION Mount for AstroX5 JohnnyFPV file, so it would fit my Lisam 210 fpv drone frame.
Topics: R/C Vehicles, stl, Lisam_LS210, osmo_action, dji, thingiverse, fpv_camera_mount, FPV_freestyle
3
3.0
Jun 11, 2021
06/21
by
Mike Korn (Skyline89)
data
eye 3
favorite 0
comment 0
Use 2.5mm Carbon for the frame and TPU for the printed parts. Flight Videos: https://www.youtube.com/watch?v=KSaGzY_fZg4 https://www.youtube.com/watch?v=R0oe4mnh9_U https://www.youtube.com/watch?v=STsfSlLONFU&t=3s You need: - 20x20 FC with ESC - Runcam Nano 3 or similar Split-Type Camera - 12xx Motors 4000-6500KV - Small VTX (best use TBS Unify Nano Pro32) - Receiver (best use Crossfire Nano) - Antenna (best use FpvCycle Minimortal T) - 10x115mm Batterystrap - recommended Battery 450-550 3S...
Topics: fpv, micro_quadcopter, thingiverse, fpv_racer, Quadcopter_Frame, sub250g, Quadcopter, R/C Vehicles,...
2
2.0
Apr 8, 2021
04/21
by
Gavin Stewart (gvnstewart)
data
eye 2
favorite 0
comment 0
I made small modifications to the top and bottom plate and made some beefier 4in arms. -Top plate mod: clearance for battery leads and holes for toilet tank battery strap. -Bottom plate mod: hole made for a zip tie to support the vtx antenna. -Arms: specified 4mm thick carbon and arms have been thickened horizontally by 1.5mm as well. Im also playing around with printed parts to use on this frame. Since all my cameras are 14x14 I made some mounts for the front standoffs. I also made a center...
Topics: fpv, fpv_racer, freestyle, drone, sub250g, 4inch, tarsier, fpv250, stl, thingiverse, FPV_freestyle,...
2
2.0
Mar 18, 2021
03/21
by
Alan Ball (FlyingRobotZA)
data
eye 2
favorite 0
comment 0
This is a front bumper which helps protect the carbon bottom plate.
Topics: R/C Vehicles, echoquad, quad, EchoQuad_Freestyle, fpv, Quadcopter, thingiverse, Drones,...
