0
0.0
Mar 10, 2022
03/22
Mar 10, 2022
by
Teo (ahhai1515)
data
eye 0
favorite 0
comment 0
There were no full-unpeeled oranges on thingiverse so I added one!
Topics: thingiverse, orange, fruit, Food & Drink, stl
0
0.0
Mar 10, 2022
03/22
Mar 10, 2022
by
K C (Makfaa)
data
eye 0
favorite 0
comment 0
Cafelat Robot Magnet Shoulder Mounts Allows arms to lock in upward position Prints required: 1x Left Shoulder 1x Right Shoulder 2x Magnet caps Hardware required: Neodymium magnets, 10mm diameter x ~11mm long (for each arm) (mine were 1mm thick discs which allows adjustment of length and magnetic strength by stacking as needed.) 4x M3 bolts 2x thin piece of rubber or similar to stop bolts from scratching the back of the arm and to allow them to grip better to stop the mounts shifting position on...
Topics: Food & Drink, stl, thingiverse
0
0.0
Mar 9, 2022
03/22
Mar 9, 2022
by
John Guariglia (RazorPrinting)
data
eye 0
favorite 0
comment 0
This is a drop in replacement for the Acrylic Tube. Print in Transparent filament if you want it "see through". Or in any color you would like. Dimensions: - 120mm outer diameter - 114mm inner diameter - 100mm in height
Topics: Food & Drink, stl, thingiverse
0
0.0
Mar 8, 2022
03/22
Mar 8, 2022
by
Joao Ferreira (xatofrido)
data
eye 0
favorite 0
comment 0
All the stamps I tried was not very succesfull, then I decided to create my own. Printer: Ender 3 pro infill: 20% Layer: 0.2 If you like,[ buy me a coffee](https://ko-fi.com/joaoferreira84751) :)
Topics: thingiverse, cookiecutter, alphabet, Food & Drink, cake, cookie_cutter, stl, stamp, cookie
0
0.0
Mar 7, 2022
03/22
Mar 7, 2022
by
Collin Decker (Collins_Prints)
data
eye 0
favorite 0
comment 0
This is a cool spoon I quickly threw together in blender for St. Patricks' Day! Hope you enjoy it!
Topics: shamrock, thingiverse, rock, cereal, irish, march, sham, holiday, green, spoon, St_Patricks_Day,...
0
0.0
Mar 7, 2022
03/22
Mar 7, 2022
by
Caleb Myers (Crusher000)
data
eye 0
favorite 0
comment 0
A fun gift to give to a friend that enjoys cheez-it's!
Topics: Food & Drink, stl, thingiverse
0
0.0
Mar 7, 2022
03/22
Mar 7, 2022
by
Doodly Dee (Doodlydee2006)
data
eye 0
favorite 0
comment 0
A cup holder meant to be screwed to a wall, I plan to mount it beside my bed since I tend to spill my glass of water often. This would work great for a bunk bed or a loft bed since, you cannot have a nightstand for the top bunk of either. It should fit the 75mm cup I have, and that's about all I need it for. Note: this is still a WIP, so it might not work at all.
Topics: thingiverse, Food & Drink, stl, cup_holder, cupholder
0
0.0
Mar 6, 2022
03/22
Mar 6, 2022
by
MICHAEL GIRON (mikelipino)
data
eye 0
favorite 0
comment 0
Work in Progress - stl files to be made available once finalized The Fellow Stagg X is a very capable pourover dripper. Its steep, insulated dual-walled design can make tasty coffee. Because of its design, it is possible to brew this dripper as essentially no bypass and increase extraction. It is a manual process to press out the pleats of the filter. And to mitigate clogging with no-bypass brewing, some use a dispersion screen to keep the filter from contacting the bottom of the dripper. The...
Topics: Food & Drink, stl, Coffee, thingiverse
0
0.0
Mar 6, 2022
03/22
Mar 6, 2022
by
MICHAEL GIRON (mikelipino)
data
eye 0
favorite 0
comment 0
The Fellow Stagg X is a very capable pourover dripper. Its steep, insulated dual-walled design can make tasty coffee. Because the base of the dripper is designed with a gasket to fit certain servers exactly, it can be difficult to swirl the dripper during a brew or use larger servers. This mod acts as a base to allow you to more easily swirl the dripper and use varying server sizes.
Topics: Food & Drink, stl, Coffee, thingiverse
0
0.0
Mar 6, 2022
03/22
Mar 6, 2022
by
Rafael Alías (Rafilla46)
data
eye 0
favorite 0
comment 0
Botijo típico andaluz.
Topics: bebidas, thingiverse, andalucia, Food & Drink, Andaluz, Botijo, stl, agua
0
0.0
Mar 5, 2022
03/22
Mar 5, 2022
by
Jacob Horne (JDHorne)
data
eye 0
favorite 0
comment 0
Holds 12 Silicone popsicle tubes Intended for 5.9 by 1.5-inch silicone popsicle tubes (https://www.amazon.ca/gp/product/B08BP2GX1V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1) but they may also work with other sizes. The parts snapped together great for my printer, but you may need to file the ends down or use ice to fill small gaps depending on your printer's tolerances.
Topics: frezer, popsicle_sticks, thingiverse, frezzer, tube_holder, Food & Drink, popsicle, stl
0
0.0
Mar 5, 2022
03/22
Mar 5, 2022
by
Will Stevenson (Imma_Coder)
data
eye 0
favorite 0
comment 0
Using centrifugal force, this cup/mug holder makes it nearly impossible to spill your drink! As this mug holder swings back and forth, the liquid inside goes the same way which cancels everything out as if it was just sitting still. You can even make it do tricks and flips without spilling your drink! This is especially great for open drinks, and car rides where you just need to hold something like a tea cup or a mug that wouldn't fit in a normal cup holder. For printing, rotate at about 35°-...
Topics: magic, thingiverse, no spill, holder, cable_management, anti spill, drink, gadget, vehicle, Food...
0
0.0
Mar 3, 2022
03/22
Mar 3, 2022
by
Bernd Aschenbrenner (aschi79)
data
eye 0
favorite 0
comment 0
Wiener Betonsteher wie er überall in der STadt zu finden ist.
Topics: wien, thingiverse, steher, Food & Drink, beton, stl
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
PrintStart3D (PrintStart3D)
data
eye 0
favorite 0
comment 0
Holster for 12oz can. Belt loop is 40.5mm Easily hold your favorite beverage right by your side. Simply slide a belt through the loop and boom! You have a beer/soda can holster! You can use as many holsters as you would like on your belt. Please share this design! Tag @printstart3d on instagram 0.3mm layer height 50mm/s 2mm retraction infill can be anything over 5% supports are not required
Topics: Food & Drink, stl, thingiverse
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Eli Crandall (EelzMakesPrintz)
data
eye 0
favorite 0
comment 0
This will give you 8 2" lucky charm cookie cutters!
Topics: multicutter, thingiverse, lucky_charms, Food & Drink, cookie_cutter, stl
0
0.0
Mar 2, 2022
03/22
Mar 2, 2022
by
Tauseef Tahir (tauscnc)
data
eye 0
favorite 0
comment 0
Spice rack with hidden sticky strip and 10 degree tilt. I used 3M VHB which is 1.20 mm thick.
Topics: Food & Drink, stl, thingiverse
0
0.0
Mar 1, 2022
03/22
Mar 1, 2022
by
John Carel (Nigel_Peppercock)
data
eye 0
favorite 0
comment 0
This is a WDT that fits inside the stock Cafelat Robot tamper. It's the same diameter as the tamper, so it still fits inside the Robot's hand. I used these needles (https://www.amazon.com/dp/B078HXTLX8?psc=1&ref=ppx_yo2_dt_b_product_details), but I had to cut them down after installation to make sure they fit in the tamper. The fit is slightly adjustable, if it doesn't stick into the tamper tightly, just loosen the screw a tiny bit which will adjust how much bite it gets when inserting.
Topics: thingiverse, Food & Drink, Coffee, stl, espresso
0
0.0
Feb 28, 2022
02/22
Feb 28, 2022
by
Michael Davis (MdDakota)
data
eye 0
favorite 0
comment 0
Remix of old design, as the old design did not fit standard cans. the inner sleeve will fit the old cage the inner diameter has just been adjusted to fit standard cans.
Topics: thingiverse, Chug_Jug, Food & Drink, stl, Koozie, Fortnite
0
0.0
Feb 27, 2022
02/22
Feb 27, 2022
by
AZMO (Exabyte)
data
eye 0
favorite 0
comment 0
This is a Bird Feeder for a cage. It includes: Bird Feeder Cover Blocker It is designed to fit a birdcage. Resize it to fit loosely inside one of the holes in the metal grid in the cage, and then you can tie it to the cage using strong wire going through the holes.
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 27, 2022
02/22
Feb 27, 2022
by
David Kran (shdanowka)
data
eye 0
favorite 0
comment 0
Bierdeckel Sammler
Topics: thingiverse, Food & Drink, sammler, bierdeckel, stl, Aufbewahrung
0
0.0
Feb 27, 2022
02/22
Feb 27, 2022
by
Shawn Franklin (Kobwo)
data
eye 0
favorite 0
comment 0
A simple adapter to use Aerogarden seed pods in the Clickandgrow Garden.
Topics: thingiverse, aerogarden, Click_And_Grow, Food & Drink, seed pod adapter, stl
0
0.0
Feb 26, 2022
02/22
Feb 26, 2022
by
Jeff G. (Maxx3D)
data
eye 0
favorite 0
comment 0
A coffee mug topper to help keep coffee hot longer, and to keep unwanted pests out! :D Fits a 90mm coffee mug. Scale to fit your own mug. I finally scaled x and y to 102%. It fits a little loosely so 101% would be snug.
Topics: thingiverse, coffee_cup, Coffee Top, Food & Drink, Coffee, Coffee_Mug, stl, Cover
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
andrea principi (andreaprincipi76)
data
eye 0
favorite 0
comment 0
Ho creato questa taglierina per tagliare la pizza a forma di gatto
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
andrea principi (andreaprincipi76)
data
eye 0
favorite 0
comment 0
Ho creato questa taglierina per fare la pizza a forma di dinosauro
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 24, 2022
02/22
Feb 24, 2022
by
Peter Farell (Zatamite)
data
eye 0
favorite 0
comment 0
Bunch of Bananas. Could not find a decent model of a bunch of bananas anywhere. Either they were ridiculously high poly or looked weird. Hopefully this will satisfy.
Topics: thingiverse, bananas, bunch, Food & Drink, banana, stl
0
0.0
Feb 23, 2022
02/22
Feb 23, 2022
by
Matty Ash (Mattyash)
data
eye 0
favorite 0
comment 0
This is a Easter egg mould so you can create Easter eggs as much as you would like and what ever you would like inside them. Now it is a small mould but you could always scale it up.
Topics: thingiverse, easter_egg, Food & Drink, stl, easter, easter_eggs
0
0.0
Feb 23, 2022
02/22
Feb 23, 2022
by
andrea principi (andreaprincipi76)
data
eye 0
favorite 0
comment 0
taglierina per biscotti al vino a forma di grappolo
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 22, 2022
02/22
Feb 22, 2022
by
Udo Dionysius (UdosXPlus)
data
eye 0
favorite 0
comment 0
ich habe mich immer geärgert, wenn ich die Zange beim BBQ auf die Ablage meines Gasgrills legen musste und dann alles voll von Öl und Fett war. Die Ablage verhindert das und ist leicht zu reinigen. Ich habe in ABS gedruckt, aber es kommt darauf an, wo die Ablage ist. Da kann es auch PLA oder PETG sein.
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
Simple Poison Pot cookie cutter
Topics: cookiecutter, thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
Simple cookie cutter I designed
Topics: cookiecutter, thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
Guillaume Neuvens (Gun1705)
data
eye 0
favorite 0
comment 0
Support pour 12 oeufs. A imprimer sur la face plate (à l'envers) Pas de support
Topics: thingiverse, holder, chicken, Food & Drink, eggs, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
Simple cookie design by me
Topics: cookiecutter, thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
New designer building custom cookie cutters for cookiers
Topics: cookiecutter, thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
Simple cookie cutter I designed
Topics: cookiecutter, thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
Simple cookie cutter I designed
Topics: thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 21, 2022
02/22
Feb 21, 2022
by
David Grover (Taccooo)
data
eye 0
favorite 0
comment 0
Simple cookie cutter I designed
Topics: cookiecutter, thingiverse, Cookie, Food & Drink, cookie_cutter, stl
0
0.0
Feb 20, 2022
02/22
Feb 20, 2022
by
Mikaël Vanherpe (MB3Y)
data
eye 0
favorite 0
comment 0
**A Soda Self Service Station comprises of** - a self made **tray** that can be stored in the **fridge** - and features an **attractive front** - with a **slot** for your payment - It collects your **money or tokens** - in an open tray enabling you -yourself- to take back the necessary change - The tray is filled with a variety of refreshing **drinks** - labelled with a **pricetag** A bit reluctant to store that money openly in the fridge?? ... then go for prepaid tokens... and grow some trust...
Topics: thingiverse, soda_can, Food & Drink, Soda, coca_cola, stl
0
0.0
Feb 19, 2022
02/22
Feb 19, 2022
by
Gakourna Station (Gakourna)
data
eye 0
favorite 0
comment 0
This a ramune reproduction. Empty on the inside.
Topics: drink, drinking, vending, stl, Vending_Machine, japonese, Japan, Japanese_culture, drinking_glass,...
0
0.0
Feb 19, 2022
02/22
Feb 19, 2022
by
oliver ward (oliward)
data
eye 0
favorite 0
comment 0
This is an enlarged drip tray i designed for a vertuo next coffee machine, allowing a larger mug to sit better while the coffee is being made Printed in pla with the top face down Choose your own infill ect printed on an ender 3 pro Designed and printed by Oliver Ward
Topics: thingiverse, coffee_machine, nespresso, Food & Drink, Coffee, vertuo, stl, drip_tray
0
0.0
Feb 18, 2022
02/22
Feb 18, 2022
by
david chen (fluxwood)
data
eye 0
favorite 0
comment 0
Dosing funnel for the stock 58mm portafilter that comes with the Gaggia Classic Pro
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 18, 2022
02/22
Feb 18, 2022
by
Ondrej Stritesky (stritacz)
data
eye 0
favorite 0
comment 0
Apple model
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
matthew oloughlin (shadowmatto)
data
eye 0
favorite 0
comment 0
some numbers for the top of a cake
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
Lucas Power (LukoPrintsNZ)
data
eye 0
favorite 0
comment 0
A simple cap to put onto cans to hold liquid, fizz and to keep those pesky bugs out
Topics: cancap, thingiverse, lid, cap, can, Food & Drink, stl
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
Johan Løvold (jlovold)
data
eye 0
favorite 0
comment 0
I wanted to make a holder for my AeroPress, but did not find one that I really liked, so I figured out I could design one myself. So far I am pretty happy with the result, as my AeroPress is held securely in place, while being easy to retrieve and replace. New version is updated to fit both old and new AeroPress standard-models. The piston is now held firmly in place, and will not fall out even if the mount is held at an angle. The photos are of the old version, but the new version is the same,...
Topics: aeropress_tidy, thingiverse, aeropress_mount, aeropress_wall, Food & Drink, aeropress_stand,...
0
0.0
Feb 17, 2022
02/22
Feb 17, 2022
by
Maximillian Smith (Gremble)
data
eye 0
favorite 0
comment 0
This is a kitchen tool to quickly spread butter over many sandwiches. https://youtu.be/mtmC0fVQy5c
Topics: thingiverse, sandwich, speed, food, stl, Food & Drink, butter spreader, speed butter, butter,...
0
0.0
Feb 13, 2022
02/22
Feb 13, 2022
by
Paul Sirianni (innairis)
data
eye 0
favorite 0
comment 0
This is a part of the Bunn airpot lid assembly that you cannot purchase separately. The original is a clear plastic (nylon?) material that ended up snapping inside one of my pots. To get to this part, you'll need to remove the cover on the airpot lid, remove the single screw holding the "pump assembly", and then you can slide out the broken pusher arm and the rod holding it in place. Made for and fits Bunn airpot lids: https://www.espressoparts.com/products/bunn-black-lever-airpot-lid
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
Jonny Welch (JonnyReverb)
data
eye 0
favorite 0
comment 0
A Champagne Flute with the letter "J" on it. I recommend using 3 or more wall layers to make sure it is water-tight.
Topics: glass, Jonny, thingiverse, Food & Drink, Champagne_Glass, Champagne_Flute, stl, cup
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
Jonny Welch (JonnyReverb)
data
eye 0
favorite 0
comment 0
This is a champagne flute with the letter "R" on it. I suggest using 3 or more layers on the wall to keep it water-tight.
Topics: glass, thingiverse, Champagne Flute, Champagne, Food & Drink, Champagne_Glass, easy_print, stl,...
0
0.0
Feb 12, 2022
02/22
Feb 12, 2022
by
steve simon (unibomber)
data
eye 0
favorite 0
comment 0
raptors beer coozie for when you're watching the game
Topics: Food & Drink, stl, thingiverse
0
0.0
Feb 11, 2022
02/22
Feb 11, 2022
by
Suede Lyons (slickshadows)
data
eye 0
favorite 0
comment 0
Orzhov coaster with receding logos for resin pouring.
Topics: drink_coaster, thingiverse, coaster, Orzhov, magic_the_gathering, Food & Drink, mtg, stl,...
