9
9.0
Jun 10, 2021
06/21
by
Zsolt Soros (zsoros)
data
eye 9
favorite 0
comment 0
It is for "not to change the bit" use only. Heat up the bit and push into the handle. Cool down after it is on the hole.
Topics: thingiverse, Hand Tools, hand_tools, stl
6
6.0
Jan 4, 2021
01/21
by
HT Niu (DONW999)
data
eye 6
favorite 0
comment 0
Small Chisel honing guide. Need: M3 x 50 bolt x 2 M3 nut x 4 M4 x 15 flat head x 2 M3 luck nut x 2
Topics: hand_tools, Hand Tools, stl, thingiverse
11
11
Jan 11, 2021
01/21
by
Arvind Kumar yadav (arvindky)
data
eye 11
favorite 0
comment 0
Allen key handle designed for M3 Allen Key . Print the both part , place the allen key in given slot , stick with glue.. the tool is ready for use.
Topics: thingiverse, hand_tools, Hand Tools, stl
6
6.0
Mar 3, 2021
03/21
by
Ramesh Babu (ramesh_amathalai)
data
eye 6
favorite 0
comment 0
3D printing plays an important role in our engineering field. Being in marine engineering field, we choose to do screw driver which is an important tool and frequently used during maintenance of engines. Although it’s a simple tool but to create one into an object was a challenge to us. In this portfolio we include the stages of creating our mechanical tool which is a “Philips and Flat type screwdriver”.
Topics: thingiverse, hand_tools, Hand Tools, stl
4
4.0
Mar 19, 2021
03/21
by
Ryan (RFBeats)
data
eye 4
favorite 0
comment 0
Ergonomic Adjustable Wrench, single print. 0-23mm ABS Recommended Made using soluble supports
Topics: thingiverse, Hand Tools, hand_tools, stl
4
4.0
Mar 18, 2021
03/21
by
Jacque Riekert (JtRiekert)
data
eye 4
favorite 0
comment 0
*** Please note I have not tested this tool, its just a carbon copy.***
Topics: stl, hand_tools, Hand Tools, thingiverse
9
9.0
Jun 10, 2021
06/21
by
Zsolt Soros (zsoros)
data
eye 9
favorite 0
comment 0
It is for "not to change the bit" use only. Heat up the bit and push into the handle. Cool down after it is on the hole.
Topics: thingiverse, Hand Tools, hand_tools, stl
6
6.0
Mar 17, 2021
03/21
by
Kameran Deimling (KameranD)
data
eye 6
favorite 0
comment 0
This is a remix of lindsaytcrawford push drill. Which Is a Remix of LoBoCNC's push drill. Which Is a Remix of Speedy777's push drill. After printing his push drill and assembling it I managed to break the jaws when tightening the chuck on a small drill bit. This meant I would have to print the largest part of the drill all over again since the jaws are fused to the body. This seemed unnecessary when I had broken such a small part, so I decided to make a slight improvement. Instead I decided to...
Topics: Hand_Tools, stl, Hand Tools, thingiverse
4
4.0
Jan 4, 2021
01/21
by
HT Niu (DONW999)
data
eye 4
favorite 0
comment 0
Small Tape Wrench for plastic, 2mm to 10mm handle or equivalent imperial measurements. Need 4 x M5 Nut and 2 x M5x40 bolt.
Topics: hand_tools, Hand Tools, stl, thingiverse
9
9.0
Apr 23, 2021
04/21
by
Gennady Rafalovich (grafis)
data
eye 9
favorite 0
comment 0
This is a motorized solder paste dispenser for soldering SMT boards that was inspired by ithese things http://www.thingiverse.com/thing:384680 http://www.thingiverse.com/thing:1119914. Added ring for easy access to the buttons.
Topics: stl, Hand Tools, hand_tools, thingiverse
10
10.0
Jan 11, 2021
01/21
by
Mario F. (mafe68)
data
eye 10
favorite 0
comment 0
Corner 150 x 100 mm
Topics: thingiverse, hand_tools, stl, openscad, Hand Tools
8
8.0
Jan 16, 2021
01/21
by
N T (ntdesign)
data
eye 8
favorite 0
comment 0
More ergonomic grip for the standard needle collets commonly used in microscopy (see photo). In the .scad file you can adjust the bore to account for tolerances (original holder is 5 mm in diameter). In the provided .stl this is set to 5.5 mm, which works well for me with PLA. It takes a bit of force to push in the metal grip, but still allows removal. Minor changes from the original design: now all hollow, slightly improved printability and cooler endcap.
Topics: microscopy, thingiverse, hand_tools, Hand Tools, stl
5
5.0
Mar 18, 2021
03/21
by
Tim Parnell (Gomi_Designs)
data
eye 5
favorite 0
comment 0
A wrench to assist in opening chemical containers with 58mm lids. My 5 litre polyester resin container gets gummed up and hard to open, Laser-cut from 6mm ply this handy tool allows easy opening.
Topics: tools, stl, hand_tools, thingiverse, Hand Tools
7
7.0
Jun 7, 2021
06/21
by
Fadıl Tuğal Kain (Tubal_Cain)
data
eye 7
favorite 0
comment 0
Note: If you want to use it as a casting model i recommend; %10 infill black pla (or if you can find, transparent(pure) pla is better for casting) 0.2 mm layer options for using less pla for lost-pla casting process.
Topics: Hand Tools, thingiverse, stl, hammer, hand_tools
2
2.0
Apr 19, 2022
04/22
by
John Lim (EngineerSaviorHero1977LRT)
data
eye 2
favorite 0
comment 0
Tool Assist Wretch Ratchet Set Metric Standard from 8mm to 21mm. That of 3/8". John Pao Lim Credit to everyone shown on Draft.
Topics: hand_tools, stl, Hand Tools, thingiverse
4
4.0
Jun 11, 2021
06/21
by
Nathan Dee (Metalhead_Industries)
data
eye 4
favorite 0
comment 0
Plastic scraper for all your plastic scraping needs. Uses approx profile of the metal scraper that comes with Ender printers.
Topics: thingiverse, Hand Tools, hand_tools, stl
10
10.0
Apr 27, 2021
04/21
by
can aydin (Canaydin9)
data
eye 10
favorite 0
comment 0
You can also use a 1/4 inch hex socket to turn it into a screw driver
Topics: hand_tools, stl, thingiverse, Hand Tools
6
6.0
Apr 20, 2021
04/21
by
Christian D. (Daisbear)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:2404850 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2404850
Topics: thingiverse, stl, customized, Hand Tools, hand_tools
3
3.0
Mar 25, 2021
03/21
by
Martin van Es (mrvanes)
data
eye 3
favorite 0
comment 0
Customizable Hex Allen Key.
Topics: stl, thingiverse, Hand Tools, hex, hand_tools
3
3.0
Apr 24, 2021
04/21
by
Sumedh Kadam (SumedhKadam)
data
eye 3
favorite 0
comment 0
Screw driver is very important for an engineer, so here's one model of screw driver so viewer can edit or get 3D printed according to their requirements.
Topics: hand_tools, Hand Tools, stl, screwdriver, thingiverse
8
8.0
Jan 18, 2021
01/21
by
Robert Sanchez (revensanchez)
data
eye 8
favorite 0
comment 0
I needed a mini-clamp to hold down my spool holder to my desk and mistertech's design was just about what I had in mind, minus the headphone part. I also shortened the clamp down to 20mm because my desk is very thin. I also wanted the screw to withstand more tension, so I decided to split the original model and print both halves horizontally and acetone weld them after. If you want the whole bolt or a larger version, check out [the original design](https://www.thingiverse.com/thing:2076034).
Topics: clamp, thingiverse, hand_tools, Hand Tools, stl
10
10.0
Apr 30, 2021
04/21
by
Timothy Loomis (Hammer79)
data
eye 10
favorite 0
comment 0
Viscous fluid extruder for my 3d printers main barrings, I picked up a can of barring grease and just filled the tube and it works really well. I did have to sand the bottom of the pump section so that the tubes would fit together due to the base of the print being squished slighly, but other than that it worked out really well, just make sure you use all the grease in the tube before refilling it or its gets a pocket of air trapped inside and pushes the ram out of the cylinder.
Topics: stl, hand_tools, grease, Hand Tools, thingiverse
8
8.0
Jun 20, 2021
06/21
by
knys ynk (kny5)
data
eye 8
favorite 0
comment 0
I was trying to print a holder for my drill but I was stuck trying to properly fit the case in it, so I made this because in this part of Mexico is pretty difficult to acquire this kind of tool. It was fun 5mm of profiles every 25 minutes until I reached 100 mm.
Topics: Hand Tools, tools, thingiverse, hand_tools, stl
3
3.0
Oct 26, 2021
10/21
by
Ben Körner (DrMedBenson)
data
eye 3
favorite 0
comment 0
Kleine Montagehilfe für jede Hosentaschen eines KfZ-Dudes. Leicht und handlich, soll dabei helfen, Radbolzen zu heften. Designt in SW17, SW19 und SW21 Habe alle Mechaniker Kollegen damit ausgestattet und genug positives Feedback erhalten um das Model online zu stellen Viel Spaß
Topics: tool, Hand Tools, stl, thingiverse, hand_tools
9
9.0
Jan 11, 2021
01/21
by
TGit- Tech (TGit-Tech)
data
eye 9
favorite 0
comment 0
Use #6-32 x 3/4" long machine screws and nuts Made for 24T x 12" Bi-Metal Hacksaw blades.
Topics: thingiverse, hand_tools, stl, hacksaw, Hand Tools
12
12
Jan 18, 2021
01/21
by
Micha Krause (mikra)
data
eye 12
favorite 0
comment 0
Glue on some sandpaper around the cylinder, leave the ends without sandpaper. The cylinder gives you 4 sanding options: 1. Flat 90° to guiding surface. 2. Radius 90° to guiding surface. 3. Flat 45° to guiding surface. 4. Radius 45° to guiding surface.
Topics: sanding, thingiverse, hand_tools, Hand Tools, stl
4
4.0
Jan 7, 2021
01/21
by
Kike (Maxtramas)
data
eye 4
favorite 0
comment 0
Adaptador para puntas 1/4 a 1/4. Pequeña herramienta para usar puntas 1/4 Mini tool tips 1/4 Uso en pequeños montajes que no necesitan mucho torque de apriete. Use in small assemblies that do not need a lot of tightening torque. Diseños con pequeña endidura en su interior para ubicar un imán de 5mm.x1mm. (opcional). Designs with small indentation inside to locate a magnet 5mm.x1mm. (optional)
Topics: Hand Tools, stl, tool, hand_tools, thingiverse
4
4.0
Jan 7, 2021
01/21
by
Aiden Corder (aidencorder)
data
eye 4
favorite 0
comment 0
Just a simple scredriver
Topics: Hand Tools, stl, hand_tools, thingiverse, tools
5
5.0
Mar 21, 2021
03/21
by
Stephen (Evostevo777)
data
eye 5
favorite 0
comment 0
Just a stubby screwdriver if you need one. Print how you like!
Topics: stl, Hand Tools, screwdriver, hand_tools, thingiverse
3
3.0
Mar 10, 2021
03/21
by
BW Cleary (Drummadude)
data
eye 3
favorite 0
comment 0
This a handy wrench to have around as I always seem to be looking for my 1/2 wrench or my 10mm wrench.
Topics: hand_tools, stl, thingiverse, wrench, Hand Tools
4
4.0
Mar 15, 2021
03/21
by
Werner Schwarzmeier (XboxOldie)
data
eye 4
favorite 0
comment 0
This is just a small window wedge tool to keep your window open either tilted or fully open. Approx 20 g filament with 10% infill cubic and 2 h printing time. Maybe someone finds it also useful.
Topics: thingiverse, Hand Tools, hand_tools, window, stl
2
2.0
Oct 14, 2021
10/21
by
Steffen K. (brettspielorganizer)
data
eye 2
favorite 0
comment 0
Fugenglätter um Silikon Fuge glatt zu ziehen mit Radius 8 12 17 und 22 Grout smoother to smooth the silicone joint with radius 8 12 17 and 22 Hier eine Anleitung für die richtige Anwendung: Here are instructions for the correct application: https://www.youtube.com/watch?v=FwXapBqj_h4
Topics: thingiverse, Silikon, stl, hand_tools, Hand Tools, bathroom
9
9.0
Apr 23, 2021
04/21
by
Bernard Bout (bernbout)
data
eye 9
favorite 0
comment 0
This is an attachment for a rotary tool - Dremel / Ozito that once fixed to a table either with clamps or screws, allows the tool to be positioned at multiple angles. Features a Ball & Socket joint that can be tightened down to the position needed. Also features a channel from the bottom thru to the front of the tool for threading wires to provide power for LED's. These can be strips that are stuck on to provide light to the front.
Topics: ozito, hand_tools, Hand Tools, dremel, stl, thingiverse
3
3.0
Jan 15, 2021
01/21
by
Rami Kytölä (Ramiky)
data
eye 3
favorite 0
comment 0
PVC pipe 75mm saw guide. Easy to cut pipe straight.
Topics: thingiverse, hand_tools, pvc_pipe, stl, Hand Tools
4
4.0
Jan 6, 2021
01/21
by
Don (Obi-Don)
data
eye 4
favorite 0
comment 0
Grandkids have fun with this hand tool toy pliers. They use one hand per handle and use it to pick things up and move them. The pliers' serrations intermesh. No support material is needed.
Topics: pliers, toy, stl, Hand Tools, hand_tools, thingiverse
4
4.0
Mar 25, 2021
03/21
by
john roy (johnroy22222)
data
eye 4
favorite 0
comment 0
Torx key holder The small torx holder isn't airtight. So, work in progress. PLA 0.4 10% brim : yes support : no
Topics: stl, thingiverse, torx, tools, Hand Tools, hand_tools
10
10.0
Apr 7, 2021
04/21
by
Curt (reichwec)
data
eye 10
favorite 0
comment 0
This file set is from a screwdriver that I modeled. You can print the handle and insert a actual blade if you simply scale it up or down as needed. I have included the inventor files for your use. Have fun.
Topics: handle, stl, thingiverse, screwdriver, Hand Tools, hand_tools
5
5.0
May 1, 2021
05/21
by
ガレージ 僕らの (bokugare)
data
eye 5
favorite 0
comment 0
You need a M10_bolt and M10_nut
Topics: stl, hand_tools, 3d_printer, Hand Tools, thingiverse
3
3.0
Mar 4, 2021
03/21
by
Simon John (sej7278)
data
eye 3
favorite 0
comment 0
Inspired by a video by clough42, I made a metric tap guide for M3.5-M12 taps. Each tap hole was sized based on Little Machine Shop's clearance data plus a 0.2mm adjustment, plus or minus a fraction of a millimetre based on my printer's tolerances. The smaller holes seemed to need more adjustment as they were tool small, but from M8 upwards they actually seemed too large! I've only test printed using PLA, so potentially with ABS shrinkage you may need further modification. Fusion 360 file is...
Topics: Hand Tools, metric, thingiverse, stl, hand_tools, tap
9
9.0
Jun 21, 2021
06/21
by
Hughe Chung (deltapenguin)
data
eye 9
favorite 0
comment 0
Cap for Pro's Kit tweezer
Topics: Hand Tools, thingiverse, tweezer, electronics, stl, Hand tools
9
9.0
Apr 28, 2021
04/21
by
Joe Manlove (jmanlove)
data
eye 9
favorite 0
comment 0
This is a remix of http://www.thingiverse.com/thing:1617771, altered to have a flat base so it can be printed without supports. I had good results printing it with 4 shells, 20% infill in PLA on a replicator 2. To insert the blade, I clamped the blade in a vice and tapped the handle onto it with a hammer. The blade is from https://www.amazon.com/gp/product/B00VB1U886, which is a wonderful tool with a fragile handle.
Topics: hand_tools, thingiverse, Hand Tools, stl, handle, removal
6
6.0
Jun 11, 2021
06/21
by
Eve (Eve_Squared)
data
eye 6
favorite 0
comment 0
Can be used as a regular hammer. Can also be used for CBT. Do not change print orientation as the hammer's handle benefits from the layer lines being vertical.
Topics: hand_tools, thingiverse, tool, Hand Tools, stl
10
10.0
Apr 23, 2021
04/21
by
Kyle Golobish (phos4us15)
data
eye 10
favorite 0
comment 0
This design was inspired by Lochemage's sanding block( http://www.thingiverse.com/thing:23863 ). I needed a block to get corners with and a block for higher grits like 220 as sanding blocks are generally 60-150 grit. Hope you like it!
Topics: sandpaper, hand_tools, Hand Tools, stl, thingiverse
10
10.0
Apr 28, 2021
04/21
by
corey milby (designer7833)
data
eye 10
favorite 0
comment 0
basic wrench for tightening bolts and nuts
Topics: hand_tools, thingiverse, wrench, Hand Tools, stl
7
7.0
Jun 21, 2021
06/21
by
Joseph Bergmans (jbergmans)
data
eye 7
favorite 0
comment 0
Quick-lock, quick-release clamp, all-plastic and 100% printable. Locking the clamp requires a little bit of force, don't overdo it because you want to keep the spring within its elastic range. In other words, you do not want to bent the spring too much. This does limit the amount of force that this clamp can apply. The clamp is not really a replacement for metal clamps but it sure can come in handy for many little jobs. Notes: - The static jaw fits snugly on the bar, no glue is necessary to...
Topics: Hand Tools, hand_tools, thingiverse, clamp, tool, stl
4
4.0
Jun 11, 2021
06/21
by
Bassam Maker (bassamanator)
data
eye 4
favorite 0
comment 0
Works perfectly with 3d prints. Haven't tested on anything else. Fits taps from M3 to M8. Larger sizes will probably work though likely not smaller ones. Parts required: -1 x M5 x 20 mm -1 x allen key/screwdriver For the body, I printed the prototypes at 20% infill, 4 walls/tops/bottoms and they were unbreakable. The final version that I will be keeping was printed at 100% infill; it was only a couple of grams heavier and took 10 minutes longer to print. Takes about 55 minutes to print at...
Topics: hand_tools, thingiverse, Tap_Wrench, Hand Tools, stl
8
8.0
Apr 18, 2021
04/21
by
Miguel Mejía (Migui18)
data
eye 8
favorite 0
comment 0
Here's the design for tweezers. It's somewhat annoying trying to pick up very small things, specially when your're working with electronic parts so I made this to make things easier.
Topics: tweezers, thingiverse, hand_tools, stl, Hand Tools, electronics
10
10.0
Jan 11, 2021
01/21
by
Daniel Stauffer (layrshift)
data
eye 10
favorite 0
comment 0
This is an adapter I made for a 0.8mm drill for the Dremel 3000. This thing is printed with foodsafe 3dk.berlin Filament.
Topics: thingiverse, tools, hand_tools, dremel, stl, Hand Tools
5
5.0
Apr 12, 2021
04/21
by
Christian S (christianegholm)
data
eye 5
favorite 0
comment 0
This small hand tool - a sort of miter box - can help you cutting the branch into the perfect angle (15°) when grafting apple, pear, plum trees etc. The Knife blade is a Stanley no. 1992 - a blade for a standard utility knife. 62 mm long and 19 mm heigth: https://www.stanleytools.co.uk/product/147165 2015.03.31: The 2 parts are updated so that the knife blade can only go as deep as the branch is. 2015.04.03 Seven small apple trees were grafted with one year old "sleeping" branch...
Topics: thingiverse, grafting, Hand Tools, stl, hand_tools, gardering
3
3.0
Mar 2, 2021
03/21
by
Emerson F (EmersonFerrarini)
data
eye 3
favorite 0
comment 0
SOCKET WRENCH FOR M3 NUTS
Topics: Hand Tools, thingiverse, stl, hand_tools, m3_nut