7
7.0
Jan 20, 2021
01/21
by
Luis Bueno (Suiso)
data
eye 7
favorite 0
comment 0
IKEA TERTIAL Work Lamp Clamp Designs ============ These four designs are a reproduction of the IKEA TERTIAL Work Lamp Clamp. --------------------- Design description: **Design 0:** Original clamp from IKEA TERTIAL Work Lamp. **Design 1:** Clamp from IKEA TERTIAL Work Lamp no horizontal hole. **Design 2:** Designed to be screwed to a table. Changed the holes to be countersunk holes. Countersunk wood screw: 4 x 12-16mm (4u) **Design 3:** No screw holes, no horizontal hole.
Topics: ikea_lamp, IKEA, IKEA TERTIAL, thingiverse, IKEA MOUNT, Replacement Parts, IKEA HACK, IKEA CLAMP,...
2
2.0
Mar 19, 2021
03/21
by
András Bíró (bbandi)
data
eye 2
favorite 0
comment 0
I didn't like how my (Ikea Not) standing lamp took up space in front of my bookshelf (Ikea Billy), so I designed clamps to attach it to the bookshelf itself. You should print one "top" and at least one "mid", though I used 2. The mid section should be screwed in - I used the screws provided for the wall mount for the Billy shelf. Fusion360 design files attached
Topics: BILLY, IKEA_Hack, ikea, thingiverse, ikea_not, Organization, ikea_billy, ikea_lamp, stl
2
2.0
May 1, 2021
05/21
by
peter wallström (zeoverlord)
data
eye 2
favorite 0
comment 0
Links and spacers for putting two IKEA Skådis 36x56 cm on the side of a IKEA Kallax bookshelf
Topics: stl, IKEA_KALLAX, ikea, Organization, thingiverse, IKEA_Hack, IKEA_Skadis
3
3.0
Apr 12, 2021
04/21
by
robin stevenhagen (RobinSt)
data
eye 3
favorite 0
comment 0
This adapter is designed to mount an IKEA dioder led lamp into an halogen spot light hole of a IKEA closet. The adapter fits into a 66 mm hole (odd IKEA spot hole diameter), and has a 80 mm 1,5mm thin bezel. The design has some slack for the dioder led lamp to allow for 3D print tolerances (hole=52 mm). I have included the 123d design files so one can modify this design to fit ones needs, and adapt it for larger or smaller holes. When using natural PLA some light of the LED partly illuminates...
Topics: thingiverse, Spotlight, IKEA_Dioder, IKEA, adapter, ikea_LED, stl, Household, IKEA_Hack, IKEA_spot
3
3.0
Jun 7, 2021
06/21
by
EUREK Technology (EUREKTechnology)
data
eye 3
favorite 0
comment 0
Ikea table lifter for LINNMON / ADILS Designed by: https://eurek.org Donations: http://paypal.me/eurektechnology
Topics: adils, IKEA__LINNMON, ikea, LINNMON, thingiverse, ikea_linnmon, stl, Office, ikea_adils, ikea_limmon
2
2.0
Apr 8, 2021
04/21
by
Guido Krömer (Cacodaemon)
data
eye 2
favorite 0
comment 0
Simple mount to build a hanging rail from a card board tube. I have added the Fusion 360 files for editing, too.
Topics: IKEA_Hack, ikea, ikea_ivar, Organization, stl, thingiverse, Ikea_Ivar_Hook
5
5.0
Mar 4, 2021
03/21
by
Jim Jacques (Jimbo70)
data
eye 5
favorite 0
comment 0
not really a remix, just an addition to a great file that I found useful but had no way to Mount. I put it inside a door to save space.
Topics: Ikea battery holder, IKEA_Skadis, Organization, IKEA_Hack, thingiverse, stl, ikea
2
2.0
Jun 11, 2021
06/21
by
Salah Hamed (SalahGHamed)
data
eye 2
favorite 0
comment 0
I made this base for the IKEA Spanst tube light so I could have them standing vertically, I left an opening for the USB cable.
Topics: ikea light, ikea hack, Decor, thingiverse, ikea, light stand, ikea spanst, ikea light stand, stl
2
2.0
Mar 31, 2021
03/21
by
Michal Kubicek (kubimi)
data
eye 2
favorite 0
comment 0
Clamp for IKEA lamp series Lock, Hyby, Rinna. Original is transparent.
Topics: ikea, ikea_lamp, thingiverse, ikea_lack, ikeahack, IKEA_Hack, DIY, stl
2
2.0
Jun 21, 2021
06/21
by
Spencer Hayes-Laverdiere (spencer_hayesl)
data
eye 2
favorite 0
comment 0
Lost this part that holds the bolts for the leg so I designed a replacement. It won't be as strong as the original and the metal bolts tend to go right through the thread stop at the end but it's a great temporary fix if you currently have a 3 (or less) legged table. Had it printed at a local place so I don't know what the print settings were or what printer they did it on, only that the material was onyx.
Topics: ikea, thingiverse, IKEA_part, stl, Parts, IKEA_Hack
1
1.0
Nov 8, 2021
11/21
by
K. Dorff (DorffMeister)
data
eye 1
favorite 0
comment 0
This is a no change version of the model by MasterNBC, except the original version had units in meters or some-such. When I put the STLs in PrusaSlicer it offered to covert them to the somewhat more standard millimeters. I said Yes and then saved them back out. So the version here should be identical to the original but in millimeters, so they should be easier to import into many slicers. I printed and installed these and am happy with the results.
Topics: stl, IKEA_KALLAX, IKEA_Hack, thingiverse, ikea, Organization
1
1.0
Nov 30, 2021
11/21
by
Kim Pimmel (kpimmel)
data
eye 1
favorite 0
comment 0
The IKEA Skadis is a great system, but the slots aren't wide enough for cables to pass through. To allow for cables to pass through the slots, I had to drill a large hole which kinda wrecked the paint and left unattractive damage visible. I used this print to plug and hide the damage, while still giving enough room for most cables (note - I found some USB C and Mini plugs may not fit through - I suggest testing the print with your cables) Also included is a hole drilling jig so that you can...
Topics: IKEA_Hack, Organization, thingiverse, ikea, IKEA_Skadis, stl
2
2.0
Apr 1, 2021
04/21
by
(Akanar)
data
eye 2
favorite 0
comment 0
For joining 2 Lack Tables next to each other in a stack. You will still need the original for the outer legs. Step File Included
Topics: ikea, thingiverse, ikea_lack, Other, IKEA_Hack, stl
1
1.0
Jan 18, 2022
01/22
by
(mcer12)
data
eye 1
favorite 0
comment 0
I have a badly declined floor towards the middle of the room, so the stock feet are not high enough. Using paper to raise it seems like a ghetto solution to me and it can sag in time so I designed little raisers which give you 1cm additional height. Be aware that the toothed ring holding the feet in place is super flimsy and easily breaks even without the additional raisers. So make sure to move the wardrobe in place with the feet screwed all the way in so that there's no weight on them! I...
Topics: ikea_pax, thingiverse, DIY, stl, IKEA_Hack, ikea
8
8.0
Jun 10, 2021
06/21
by
Marska (Marska)
data
eye 8
favorite 0
comment 0
16.6 x 16.6 x 4.35 cm - box with frame for Ikea table " lack"
Topics: IKEA_Hack, ikea_lack, thingiverse, ikea, Containers, stl
10
10.0
Jun 10, 2021
06/21
by
Adolfo Castaño (adocasma)
data
eye 10
favorite 0
comment 0
Soporte para espejo Ostana de ikea
Topics: ikea_LED, Bathroom, IKEA_Hack, thingiverse, ikea, stl
1
1.0
Apr 20, 2022
04/22
by
Iris L (iluep)
data
eye 1
favorite 0
comment 0
Bracket for IKEA Skadis for space-saving storage of patchwork rulers and other rulers and flat objects. Tight fit.
Topics: ikea, thingiverse, IKEA_Hack, IKEA_Skadis, Organization, stl
4
4.0
Jan 9, 2021
01/21
by
Remon Pel (rmpel)
data
eye 4
favorite 0
comment 0
Remixed the lamp to mount Dioder L1327 multi-colour led lamps. - New mount for lamp, to mount, remove the metal mounting plate, then snap the lamp in the mount. (The pivot point should point toward where the metal plate was, photo will follow soon) To-do: the mount is a little loose, need to tighten it up a bit so the light does not fall out as easily. (It does not in normal use, but whit a heavy nudge, it will) - Widened the channel for the cable; the Dioder has 4 wire cable, requiring 6.5 mm...
Topics: thingiverse, stl, IKEA_Dioder, IKEA_Hack, Decor, ikea
2
2.0
Apr 4, 2021
04/21
by
Kevin Reiher (Kevinjo)
data
eye 2
favorite 0
comment 0
Ikea tisch zum selbst Ausdrucken.
Topics: thingiverse, ikea_lack, ikea tisch, stl, ikea, ikea table, 3D Printers
3
3.0
Mar 16, 2021
03/21
by
Anton Alminderov (Fortunatto)
data
eye 3
favorite 0
comment 0
ENG: A mess of spoons, forks and knives in a round GRUNTDAL container frustrates a little. Teaspoons sink in it totally. So here is a divider to generate more order in this storage. Basically this detail divides container in six cells, but OpenSCAD file attached and you can change the number of rays(cells) and central tube diameter and height according to your needs. You can change the detail's height and diameters to fit the KUNGSFORS or HULTARP or FINTORP round containers. RUS: Круглый...
Topics: thingiverse, ikea_hultarp, stl, container, ikea_fintorp, IKEA_Grundtal, ikea, Containers
3
3.0
Apr 12, 2021
04/21
by
simon chan (Simonwlchan)
data
eye 3
favorite 0
comment 0
ID clip to differentiate between cutting boards (for cooked and raw meats, fruits etc). The clips will look like Brundle Fly post teleportation as the print finishes but a box-cutter and sandpaper should show the semi-circle within. This version provides enough flex yet holds on nicely. Next version to incorporate 3D text in the base as it does not print well on the wall, as it prints vertically. For now I am using different filament colours (red for raw, green for fruits, blue for cooked food).
Topics: thingiverse, 3D Printing, IKEA, IKEA_LEGITIM, stl, IKEA_Hack, Ikea_handle
9
9.0
Jun 6, 2021
06/21
by
Patrick (SnappyFPV)
data
eye 9
favorite 0
comment 0
###IKEA KALLAX zu EXPEDIT Fuss Adapter Gleicht die Höhe von KALLAX an EXPEDIT an. Für die optimale Stabilität unbedingt die Druckeinstellungen beachten. http://www.ikea.com/ms/de_DE/campaigns/expedit_kallax/ Freue mich über einen TIP :-) Habt ihr Spaß an DIY und Elektronik Spielzeug dann schaut doch mal bei GearBest vorbei - dort könnt Ihr mit dem Coupon "SnappyFPV" 18% sparen in der Kategorie RC Toys: http://www.gearbest.com/remote-control-toys-c_12018/?odr=new&lkid=10318121
Topics: thingiverse, Expedit, kallax, Household, ikea expedit, IKEA_KALLAX, IKEA_Hack, stl, ikea
4
4.0
Mar 17, 2021
03/21
by
Stefanos Stef (stefenberg)
data
eye 4
favorite 0
comment 0
Small divider for IKEA KVISSLE cabble management box
Topics: ikea, thingiverse, Containers, stl, Ikea_kvissle, IKEA_Hack
2
2.0
Mar 19, 2021
03/21
by
zhshwciz imgof (zhshwciz)
data
eye 2
favorite 0
comment 0
you will need a couple of magnet 5mm x 1mm
Topics: IKEA_Hack, ikea, thingiverse, Organization, IKEA_Skadis, stl
3
3.0
Mar 21, 2021
03/21
by
Bob (rgrannan)
data
eye 3
favorite 0
comment 0
Ikea makes a wide array of lamps based around what boils down to a plug on one end of a cord, and a bulb socket on the other. In preparation for some lamps I'm going to design, I modeled the cord and socket so that my lamps fit appropriately. I may post them as I complete. Caveat -- I have not yet tested this model but it was made through extensive measuring of the object. The screw threads especially should be tested before depending on them.
Topics: stl, IKEA_Hack, Ikea_Lamp, Decor, thingiverse, ikea
2
2.0
May 20, 2021
05/21
by
Galvan Ization (galvanization)
data
eye 2
favorite 0
comment 0
This is an adapter to let you use a lamp shade harp on your Ikea Symfonisk. To not stress the PLA, I bent the harp just enough so that's it's just snug in the adapter. The collars on the harp aren't utilized. It required only a little downward pressure to lock in place; I wouldn't use too much pressure and risk breaking the tabs on the adapter. In the picture I'm using a 6" harp. The lamp shade has an 8" top diameter, 8" height, and 10" bottom diameter.
Topics: thingiverse, ikea_lamp, ikea symfonisk, Household, IKEA_Hack, ikea, stl, lamp harp
2
2.0
Jan 16, 2021
01/21
by
Anton Hemling (Hemling)
data
eye 2
favorite 0
comment 0
Made a simple adapter for Ikea TERTIAL lamp to be used as a mic boom arm. Threads are 5/8 27tpi UNS and it uses original hardware (screw and nut) to mount to the arm
Topics: Audio, ikea_lamp, Microphone, thingiverse, mic, IKEA_Hack, ikea, stl, ikea_tertial
13
13
movies
eye 13
favorite 0
comment 0
8
8.0
Jan 12, 2021
01/21
by
(sumguyinabox)
data
eye 8
favorite 0
comment 0
We have a small apartment. When we need a table we pull the IKEA table from under the couch and assemble it. When we put it away the legs usually just roll to the lowest spot in the floor. This is to keep those table legs in a nice neat bundle.
Topics: thingiverse, stl, IKEA_Hack, ikea, Household, ikea_tables
16
16
movies
eye 16
favorite 0
comment 0
Topic: ikea
Source: Antenna
2
2.0
Jan 8, 2021
01/21
by
icXu Tomi (icXu)
data
eye 2
favorite 0
comment 0
As I wanted a sturdy and taller Lack table enclosure, I have chosen to use 40x40 square tubing for legs. I will update this post once the enclosure it's finished.
Topics: 3D Printing, ikea leg, ikea enclosure, stl, 3d printer, ikea_lack, IKEA_Hack, ikea, thingiverse
8
8.0
movies
eye 8
favorite 0
comment 0
Topic: ikea
Source: Antenna
4
4.0
Mar 9, 2021
03/21
by
jumpingjackfly _ (jumpingjackfly)
data
eye 4
favorite 0
comment 0
Just made a longer knob for one of my IKEA SKADIS pegboards (mounted farer from the wall that standard) Feel free to comment, print it as it is or create your own variation.
Topics: stl, thingiverse, pegboard, IKEA_Hack, IKEA_Skadis, ikea, Organization
9
9.0
Mar 18, 2021
03/21
by
mr whitefoot (whitefoot)
data
eye 9
favorite 0
comment 0
This is ikea duktig hook :)
Topics: Toy & Game Accessories, ikea_duktig, stl, ikea, thingiverse, ikea_kitchen, Ikea_duktig_hook
10
10.0
Jan 11, 2021
01/21
by
Yow Hwui Low (jameslow)
data
eye 10
favorite 0
comment 0
Created a sturdy and robust table connector for the IKEA Lack coffee table. Decided to construct my own as I needed sturdier connectors for my own application. It requires: 12 x M5 X 30 mm Countersunk screws !!! It's quite obvious but I'm gonna say it anyway: make sure to screw it onto the table first and then onto the legs. And of course pre-drill the hole or the wood may split.
Topics: thingiverse, stl, IKEA_Hack, ikea, ikea_lack, Household
2
2.0
Jan 7, 2021
01/21
by
Tom T (Centurytt)
data
eye 2
favorite 0
comment 0
Hi Guys, just simple, if you want to cut your legs from IKEA Lack Table, keep an eye on that the leg is hollow. So you will need this to keep the leg in place with some screws. Cheers
Topics: Other, Ikea_Lack_leg_stacker, ikea_lack_table, stl, Ikea, thingiverse, ikea_lack_leg,...
3
3.0
Jan 7, 2021
01/21
by
Olivier LE MO (olivier_lemo)
data
eye 3
favorite 0
comment 0
Le design d'origine comprend 1 coin extérieur et 1 coin intérieur mais il manquait un 3ème type de coin, le voici. Avec ça, on peut fixer toutes les configurations Alex/Linnmon. Sur la photo : les coins en vert sont ceux du design d'origine, le coin en rouge est celui que j'ai modifié. ----- The original design includes 1 outside corner and 1 inside corner but a 3rd type of corner was missing, here it is. With this, we can fix all the Alex / Linnmon configurations. In the photo: the...
Topics: ikea_alex, stl, Household Supplies, thingiverse, ikea, ikea_linnmon
1
1.0
Dec 13, 2021
12/21
by
Michael Lettner (michaellettner)
data
eye 1
favorite 0
comment 0
IKEA Skadis Holder for Symfonisk Remote. Thanks to @Rkimmell73 for the Fusion 360 IKEA Skadis Peg Models.
Topics: symfonisk, Organization, stl, ikea, thingiverse, ikea_symfonisk, IKEA_Skadis
9
9.0
Mar 18, 2021
03/21
by
Vic Powles (Vic66)
data
eye 9
favorite 0
comment 0
Had to raise an IKEA LACK TV Bench up by 25mm, printed 4 of these for the purpose. CAUTION, stability of the end result is your responsibility, this design suited my purpose, it may not suit yours.
Topics: IKEA_Hack, ikea, thingiverse, Household Supplies, ikea_lack, stl
4
4.0
Apr 20, 2021
04/21
by
Lennart Thomsen (lenne0815)
data
eye 4
favorite 0
comment 0
Wedge that can be installed in the Markus base, gives another 5° of tilt. Can be installed using the default supplied ikea screws.
Topics: thingiverse, stl, ikea, ikea_markus, Office, IKEA_Hack, markus
3
3.0
Mar 13, 2021
03/21
by
Njål Brekke (elenhinan)
data
eye 3
favorite 0
comment 0
Small box for the zigbee dimmer module taken from an IKEA Trådfri led driver, 10W. Desolder the module after removing the casing from the driver, replace wires with some longer ones. Click-fit into the box and slide the lid in, clicking it in place. With a properly tuned printer all parts should fit easily and require no tools. The dimmer module works well with 12V, as well as the original 24V when placed between a 12/24V source and LEDS. Use at your own risk etc.
Topics: thingiverse, IKEA_Hack, IKEA_TRADFRI, ikea_LED, stl, Electronics
7
7.0
Apr 17, 2021
04/21
by
Gao Cui (cuigao286)
data
eye 7
favorite 0
comment 0
My little son like to put the train run from high. But the rail connections are too loose to hold such a single rail fly on the air. When he plays with the train, I need to hold the rail for him. So I made this thing to free my hand. I measured each rail part, and took the average width and height of the rails. But there are still one or two parts have even 1mm thicker in height. So I cut the wood by knife without modifying the design. **Update 2018-01-14** The trains run too fast and always...
Topics: IKEA_train_track, Construction Toys, thingiverse, stl, IKEA_Lillabo, ikea_train_tracks, ikea
5
5.0
Jan 21, 2021
01/21
by
Sune Østergaard (suneboe)
data
eye 5
favorite 0
comment 0
A holder that clips into the IKEA ALGOT rails and lets you use the IKEA SUNNERSTA organizing system. Please note that the sunnersta bar only comes in 60 cm so it will only fit 60 cm algot sections "out of the box", or 40 cm sections cut to length - not the 80 cm sections.
Topics: Algot, sunnersta, ikea_sunnersta, thingiverse, ikeahack, IKEA_Hack, Organization, ikea, stl,...
7
7.0
Mar 22, 2021
03/21
by
Andreas Schiweck (rainrider)
data
eye 7
favorite 0
comment 0
This is a small "trap" to keep smaller cables in place of the backside of the IKEA Algot shelf. I used it for a flat cat6 ethernet cable, which is a bit difficult to get in the right position. Just print without any supports, put in the space of the backside and turn with the cable inside. Print as much as you need. Files could be found also on https://github.com/aschiweck/algot
Topics: stl, Algot, IKEA_Hack, ikea_algot, Organization, thingiverse, ikea
6
6.0
Mar 9, 2021
03/21
by
Alexander Leisentritt (alex9779)
data
eye 6
favorite 0
comment 0
# OBSOLETE!!! # See new [IKEA Samla Inserts *customizable*](https://www.thingiverse.com/thing:4243357) # Customizable inserts for the IKEA Samla 11 liters box I created a Github repo too: https://github.com/Alex9779/IKEA-Samla-Inserts The repo might have some updates not yet posted here, so have a look there too! THIS IS UNTESTED! Would be great if someone printed and confirms measures! See also my other inserts: [IKEA Samla 5l inserts *customizable*](https://www.thingiverse.com/thing:2917975)...
Topics: ikea_samla, stl, thingiverse, IKEA_Hack, Containers, SAMLA, ikea
6
6.0
Jan 21, 2021
01/21
by
Steve Meier (sdmeier)
data
eye 6
favorite 0
comment 0
IKEA should have included these to begin with. The raw silver screw heads stood out like a sore thumb next to the dark finish of the rack. These plugs helped things blend in a lot nicer.
Topics: IKEA_lack, thingiverse, IKEA_Hack, Replacement Parts, ikea, stl
2
2.0
Jan 5, 2021
01/21
by
Olddeath (Olddeathde)
data
eye 2
favorite 0
comment 0
Hi Hier ein einfacher Halter für die Tardfrie Fernbedienung. Einfach drucken, die voranden Schalter etwas von der Wand ziehen und den Halter dahinter schieben.
Topics: stl, Ikea tradfri, IKEA_Hack, tradfri, ikea, Household, thingiverse
2
2.0
Mar 31, 2021
03/21
by
Øystein Hansen (tossiT)
data
eye 2
favorite 0
comment 0
To mount the Omlopp inside the IKEA Metod-frames without screws. Remixed from audiogurus original design. Just added some pegs and cutted them down. Print sideways with support. And print at least two per light. Two versions, one "multi" version with two pegs (if you want to mount it downwards)
Topics: ikea, Household, thingiverse, ikea_metod, IKEA_Hack, OMLOPP, stl
3
3.0
Mar 25, 2021
03/21
by
(julienM)
data
eye 3
favorite 0
comment 0
This is the 76 cm wide and 56 cm high pegboard
Topics: stl, IKEA_Skadis, pegboard, thingiverse, Organization, ikea, IKEA_Hack
7
7.0
Jan 18, 2021
01/21
by
Sean Patrick Burgess (Sean_Burgess)
data
eye 7
favorite 0
comment 0
I needed some custom legs to loft an IKEA Lack Wall Shelf Unit up off the floor in order to clear baseboards. The leg is 2" square to match the thickness of the shelves and 4.25" tall, which was the height of our baseboard. I added two tabs on the inside for screws to attach the leg securely to the bottom of the shelf. You can use #6 size screws.
Topics: ikea_lack, Decor, thingiverse, IKEA_Hack, furniture, ikea, stl
