3
3.0
Jan 5, 2021
01/21
by
Reto Hasler (ascii_ch)
data
eye 3
favorite 0
comment 0
Made the PowerPlay mount https://www.thingiverse.com/thing:3918015 compatible to all the other universal mount parts in this collection: https://www.thingiverse.com/ascii_ch/collections/universal-mount Credits to Haku3d https://www.thingiverse.com/haku3d/designs since he did the harder part of this thing.
Topics: ImmersionRC, stl, Hobby, thingiverse, powerplay, immersionrc_powerplay
4
4.0
Apr 12, 2021
04/21
by
Brandon Craig (Mikeycantoon)
data
eye 4
favorite 0
comment 0
NOTE: 3/31/2015 I based the dimensions of the antenna area off of my ImmersionRC 5.8GHz SpiroNET Antenna set. The nut size of the antenna specifically. Your antenna nut size may be slightly larger. In Version 1b I will make this area larger. This is Version 1 of this case design. I started on this project after a friend and I both broke our video transmitter antenna connector off of the board. This case adds support around the connector and antenna, allowing you to position the antenna or take...
Topics: thingiverse, 600mw_immersion, ImmersionRC, ImmersionRC_58Ghz_600mw_Tx,...
9
9.0
Apr 28, 2021
04/21
by
Marc Urben (oxivanisher)
data
eye 9
favorite 0
comment 0
Immersion Duo 5800V4 case to mount it on a camera stand or directly to a pole.
Topics: thingiverse, immersionrc_duo, stl, R/C Vehicles, ImmersionRC
4
4.0
Mar 15, 2021
03/21
by
Mark Avenius (MarkAvenius)
data
eye 4
favorite 0
comment 0
I quickly converted the Crossfire Nano TPU holder to fit an ImmersionRC Ghost Atto receiver instead. I also added zip tie strain relief holes for the antenna. Printed with 100% infill in SainSmart TPU.
Topics: thingiverse, ImmersionRC, ghost, R/C Vehicles, stl, ImmersionRC_ghost
4
4.0
Apr 24, 2021
04/21
by
st kr (sk1243)
data
eye 4
favorite 0
comment 0
screen protector for the immersionRC powerplay printed in pla
Topics: immersionrc powerplay, ImmersionRC, stl, R/C Vehicles, thingiverse, powerplay
3
3.0
Apr 24, 2021
04/21
by
Nicola Finke (nicolalego)
data
eye 3
favorite 0
comment 0
Parti disegnate da me per riparare e rinforzare il Vortex 250 PRO
Topics: stl, Other, vortex_250_pro, immersionrc, ImmersionRC_Vortex, thingiverse
9
9.0
Apr 26, 2021
04/21
by
wayne andrews (wayneuk)
data
eye 9
favorite 0
comment 0
a mount for the go pro session & vortex 250 i havent got round to making one yet so let me no edited 01.08.15 alteration amended has been moved forward to allow room for antenna
Topics: thingiverse, 250pro, immersionrc, vortex 250 pro, Vehicles, stl, ImmersionRC_Vortex
11
11
Apr 16, 2021
04/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
these are oem fitment side plates with esc holders if they need changing a little please just let me know
Topics: immersion_rc, vortex, 3D Printing, thingiverse, stl, ImmersionRC, ImmersionRC_Vortex
3
3.0
Jun 11, 2021
06/21
by
Stefan H (AlligatorFPV)
data
eye 3
favorite 0
comment 0
Dual FPV Antenna and ImmersionRC Ghost Antenna mount for Alligator FPV Frame. Also fits TBS Tracer Antenna. Check out the complete build:https://rotorbuilds.com/build/26780
Topics: fpv, ImmersionRC_ghost, AlligatorFPV, ImmersionRC, thingiverse, R/C Vehicles, stl
11
11
Apr 22, 2021
04/21
by
Jaime Visser (jvisser)
data
eye 11
favorite 0
comment 0
Fits in a 2cm lowrider ZMR250 between the plates. This version holds a 25mw ImmersionRC VTX
Topics: thingiverse, stl, R/C Vehicles, ZMR250, banggood_zmr250, ImmersionRC_25mw_VTX, ImmersionRC
7
7.0
Mar 3, 2021
03/21
by
Curtis Trudeau (Porksoduh)
data
eye 7
favorite 0
comment 0
TPU ufl Axii mount for the Vortex 180. This slides through the hole where the SMA connector is from the factory. The V2 file has a more snug fit, but is more difficult to install.
Topics: thingiverse, lumenier_axii, ImmersionRC, ImmersionRC_Vortex, R/C Vehicles, stl, AXII
3
3.0
Jan 19, 2022
01/22
by
Anthony Cake (anthonyrc)
data
eye 3
favorite 0
comment 0
This is the ImmersionRC antenna/rx mount for the Orqa Mk.2 Goggles. Best when printed on a resin printer (or similar). Injected version coming...
Topics: Robotics, thingiverse, ImmersionRC, OrqaFPV, stl
7
7.0
Jan 19, 2021
01/21
by
Paul Presley (rcflyer99)
data
eye 7
favorite 0
comment 0
Just a first try at a better longer lasting skid plate. The basic idea is to also protect the underside of the motors from skid damage so not to have to buy crash kits or arms to replace underarms :> It's just wide enough so that when landing it can't really touch the under motor arms and if you do, you have probably hit your props.
Topics: Mojo 230, ImmersionRC, blade, thingiverse, ImmersionRC_Vortex, R/C Vehicles, stl
11
11
Apr 16, 2021
04/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
This is an oem fitment vortex side plate, This has esc holders and vents all round and slimmer than my other version but not as strong as the struts were halved.
Topics: immersion_rc, vortex, 3D Printing, thingiverse, stl, ImmersionRC, immersion, ImmersionRC_Vortex
11
11
Mar 21, 2021
03/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
This is an oem fitment vortex side plates with esc holders and centre vents.
Topics: stl, 3D Printing, vortex, immersion, immersion_rc, ImmersionRC_Vortex, thingiverse, ImmersionRC
12
12
Apr 16, 2021
04/21
by
Will (EarlPrinter)
data
eye 12
favorite 0
comment 0
This is a video transmitter holder built for an ImmersionRC 250mw transmitter.
Topics: video_transmitter, immersion_rc, Hobby, video_transmitter_case, thingiverse, stl, ImmersionRC,...
4
4.0
Apr 12, 2021
04/21
by
Han Solo (SGT_Stadenko)
data
eye 4
favorite 0
comment 0
My take on a protector for the IRC 600mW 5.8GHz VTX. When you screw on your antenna, it will tighten against the case, thus 'sandwiching' the case between the square part of the SMA jack and the antenna. Haven't crashed with it yet, but it should prove to keep your SMA jack attached to the board.
Topics: thingiverse, IRC, 600mw_immersion, ImmersionRC, vtx, ImmersionRC_58Ghz_600mw_Tx_Case,...
5
5.0
Apr 13, 2021
04/21
by
Mike Brandi (idnarbjm)
data
eye 5
favorite 0
comment 0
Here is a better version of this RX case. This one doesn't require that you remove the cover from the receiver. http://www.thingiverse.com/thing:889408 I used [Earthworm's](http://www.thingiverse.com/thing:811825) great D4R-II mount, but added a little to the bottom and holes for Zip-ties. Its made to mount on the receiver tray for the ImmersionRC Vortex. With this box you need to take the cardboard case off of the D4R V2 Bottom just has larger Zip-Tie openings.
Topics: thingiverse, D4R-II, Vortex, FrSky, ImmersionRC, ImmersionRC_Vortex, stl, immersion_rc, R/C Vehicles
4
4.0
Jan 6, 2021
01/21
by
Dima Tsvetkov (DiAleksi)
data
eye 4
favorite 0
comment 0
Universal ImmersionRC Ghost qTee antenna rear standoff mount. Horizontal mount with 0°, 15°, 30° and 45° angles. Vertical mount with 0°, 15°and 30° angles. Print without supports. Insert antenna from behind and it will click in.
Topics: ImmersionRC, R/C Vehicles, stl, ghost_qtee, antenna_mount, thingiverse, ImmersionRC_ghost
11
11
Apr 30, 2021
04/21
by
Alexandr IDK (alexandridk)
data
eye 11
favorite 0
comment 0
https://www.youtube.com/watch?v=mZtWnP86WOY Now you can fly without fear of damaging the battery. I think this design is lighter than similar parts, but difficulty in printing, after printinting this parts you must use glue or solvent weld for you plastic. Also i include full model (from 2 pars), but it needs mutch more support.
Topics: stl, arm, ImmersionRC_Vortex, SBS, vortex_immersionRC, drone, Sport & Outdoors, vortex_285,...
4
4.0
Mar 21, 2021
03/21
by
Brent Downey (brentd)
data
eye 4
favorite 0
comment 0
This one is a snug fit, and not too bulky. It was designed to fullt encompass a right angle extension.
Topics: holder, stl, ImmersionRC_58Ghz_600mw_Tx_Case, VTX, R/C Vehicles, thingiverse, ImmersionRC
9
9.0
Apr 23, 2021
04/21
by
Jens Rehpöhler (stxShadow)
data
eye 9
favorite 0
comment 0
ImmersionRC Transmitter, Lipo Battery, Lipo Watcher, 2.4 Ghz Receiver and BEC --> all in one tidyed up place. Made for Hama Star 61 Stativ. You can also place an on/off switch witch LED in the tech department to shut down everything with one switch. I designed a holder for my dipole antenna too. If you don't need it: dont print it. Glue all 3 parts together and have fun ! https://youtu.be/SEAUecM7roE https://youtu.be/yknbZfATjCY
Topics: 3D Printing, ImmersionRC, thingiverse, stl, transmitter
3
3.0
Jan 19, 2022
01/22
by
Anthony Cake (anthonyrc)
data
eye 3
favorite 0
comment 0
This is the ImmersionRC antenna/rx mount for the Orqa Mk.2 Goggles. Best when printed on a resin printer (or similar). Injected version coming...
Topics: Robotics, thingiverse, ImmersionRC, OrqaFPV, stl
9
9.0
Jun 10, 2021
06/21
by
Nico Flood (nicoflood)
data
eye 9
favorite 0
comment 0
Vortex Pro replacement part for the dampener block
Topics: thingiverse, immersionRC, Replacement Parts, stl
3
3.0
Apr 27, 2021
04/21
by
Frank Schmitz (zishor)
data
eye 3
favorite 0
comment 0
Just a quick and easy IRC Tramp 600mW mounting (old version) because I hated how the VTX was attached on top of the nose cover.
Topics: nano talon, thingiverse, immersionrc, ImmersionRC_600mw, irc tramp, stl, R/C Vehicles, fpv
4
4.0
Mar 21, 2021
03/21
by
Sascha Zen-Ruffinen (ZSAviation)
data
eye 4
favorite 0
comment 0
Recliner for Gopro or Xiaomi Cam's. Tilted by 20 degrees. Simply use Zip Ties(2.5x100mm) to tie the Recliner to the Vortex Anti Vibration Plate. Camera can be mounted eighter with Zip Ties or with a Velcrostrap.
Topics: ImmersionRc, stl, ImmersionRc_Vortex, 20degrees, Vortex, Xiaomi, Gopro, 20, R/C Vehicles,...
4
4.0
Apr 16, 2021
04/21
by
Denis VICTORIA (denisvic)
data
eye 4
favorite 0
comment 0
A simple Mobius recliner in two parts. 20 degrees.
Topics: Mobius_Camera, mobius_mount, thingiverse, stl, ImmersionRC, R/C Vehicles, ImmersionRC_Vortex, mobius
14
14
Apr 16, 2021
04/21
by
Peter Sorgen (Supeso)
data
eye 14
favorite 0
comment 0
Simple Receiver Holder for Devo7 on the Immersion RC Vortex, easy to insert and remove...
Topics: Vortex, immersion_rc, thingiverse, Devo7, stl, ImmersionRC, R/C Vehicles, ImmersionRC_Vortex, Devo
3
3.0
Apr 2, 2021
04/21
by
T. Julien (rc_geek_france)
data
eye 3
favorite 0
comment 0
BOX FOR FIXING LIPO KEEPER ON VORTEX MOJO 230 IMMERSION RC
Topics: ImmersionRC, VORTEX_MOJO, vortex_250_pro, thingiverse, 3D Printing, ImmersionRC_Vortex, stl,...
10
10.0
Apr 21, 2021
04/21
by
(Firefly1504)
data
eye 10
favorite 0
comment 0
This is the lower plate of the immersionRC Vortex. It fits all original accessories and also the parts kindly provided by Dim3nson http://www.thingiverse.com/thing:1052847
Topics: thingiverse, mini quad, stl, R/C Vehicles, immersion_rc, vortex, fpv, ImmersionRC_Vortex,...
5
5.0
Apr 13, 2021
04/21
by
Mike Brandi (idnarbjm)
data
eye 5
favorite 0
comment 0
This receiver mount allows you to use the FrSky D4R-II receiver without taking it out of the case. The version 2 Top has larger cylinders that you can drill out to 3mm and put antenna tubing in. Version 3 Top has sideways antenna tubes
Topics: thingiverse, D4R-II, ImmersionRc_Vortex, Vortex, ImmersionRC, stl, D4R, R/C Vehicles, frsky,...
10
10.0
Apr 30, 2021
04/21
by
Dino Brasi (dinobrasi)
data
eye 10
favorite 0
comment 0
Receiver cradle for ImmersionRC Vortext 250 and Frsky D4R-II.
Topics: stl, D4R-II, ImmersionRC_Vortex, antenna_mount, R/C Vehicles, FRSKYD4R-II, thingiverse,...
11
11
Apr 16, 2021
04/21
by
dale james (Dim3nsion)
data
eye 11
favorite 0
comment 0
This is the oem style of the vortex side plates For more custom design work of all types of parts not only rc parts check my page https://www.facebook.com/groups/1600216723598853/
Topics: 3D Printing, vortex, thingiverse, stl, ImmersionRC_Vortex
8
8.0
Jun 20, 2021
06/21
by
Tom Murray (mysteroius)
data
eye 8
favorite 0
comment 0
Work in progress. Assemble using 2.5mm zip ties. Fits Immersion RC TrampHV without modification and provides support for the attached SMA pigtail. If not using the TNR, you can still access the button from above.
Topics: thingiverse, tramp_hv, Other, stl, ImmersionRC, fpv
8
8.0
Jan 16, 2021
01/21
by
Tom Smith (smitty_fpv)
data
eye 8
favorite 0
comment 0
Mount for the ImmersionRC Duo FPV receiver. Designed for 1" PVC tube. Slip a ziptie thru the slot to hold it tighter. The clip can be attached horizontally or vertically. See more info at https://www.youtube.com/watch?v=ZpkoD7MT5yc
Topics: ImmersionRC, thingiverse, Duo, R/C Vehicles, stl
5
5.0
Apr 14, 2021
04/21
by
Henry Wurzburg (ATXHELI)
data
eye 5
favorite 0
comment 0
- DR8 reciever cover/Locator Siren Mount see http://www.rcgroups.com/forums/showpost.php?p=28209415&postcount=869 for 120db Siren design - Remote VTX antenna, hinged and non-hinged....tywrap to back pivot arm - 15deg tilt plate for GP3 and Layer Lens -Front plate doubler...use 3x10mm screws in place of 3x5mm
Topics: thingiverse, Vortex, ImmersionRC, Toys & Games, stl, Miniquad
3
3.0
Jan 18, 2022
01/22
by
Alex Christofides (Axelz)
data
eye 3
favorite 0
comment 0
I liked the original design for the immersionrc duo holder, but wanted a go pro type mount so could attach to a tripod with a go pro to tripod adaptor rather than use a bolt. Did some basic editing in Tinkercad to crop the model and add a go pro mount. Printed with supports for the go pro part, I used 25% infill and came out fine in PLA. Note when printed it is a VERY tight fit - you might want to scale slightly as the design I remixed from has a slight larger gap at bottom where it kind if...
Topics: Gadgets, thingiverse, diversity, ImmersionRC, duo receiver, stl
7
7.0
Jan 15, 2021
01/21
by
Rolle Rahikainen (Rollerah)
data
eye 7
favorite 0
comment 0
With this simple foldable LapRF holder you can easily adjust your ImmersionRC LapRF to the optimal angle for reception. The holder is attached to the bottom of the puck with double-sided tape and it folds against the back cover for transport and storage. This is a very fast and simple print and it does not need any supports or post-processing. For the best durability, I would suggest using ABS or PETG filaments. I printed mine with PLA filament and it functions well but does not feel very...
Topics: R/C Vehicles, ImmersionRC, thingiverse, stl, laprf
12
12
Apr 16, 2021
04/21
by
Ricardo Santos (Chrono83)
data
eye 12
favorite 0
comment 0
This is a holder I designed to carry my Vortex outside the Taranis or any other case. Just printout, glue it to the center of the case and strap it to it. Easy and effective
Topics: holder, vortex, mini, case, thingiverse, stl, fpv, ImmersionRC, quad, R/C Vehicles,...
4
4.0
Mar 21, 2021
03/21
by
Peter Hansen (PHansen)
data
eye 4
favorite 0
comment 0
Protection holder for the ImmersionRC 600mw vTX. Strap it down using ziptie's and the antenna plug should get a really hard time coming of in a crash. Mount the case using double sided gel tape. This is not the final version. I have a version with a snap on lid. Not completed yet still needs som tweaks.
Topics: fpv, stl, ImmersionRC_58Ghz_600mw_Tx_Case, fpv250, miniquad, R/C Vehicles, thingiverse, Xhoover,...
5
5.0
Apr 20, 2021
04/21
by
Alexander Hagen (a768phoenix)
data
eye 5
favorite 0
comment 0
This is an ImmersionRC Rapid Fire cover for the Eachine EV200D. I created two cover, one with vent holes and one without.
Topics: thingiverse, rapidfire, stl, Hobby, eachine, ev200d, ImmersionRC
11
11
Mar 9, 2021
03/21
by
Schmidt Michael (askmike72)
data
eye 11
favorite 0
comment 0
Holder for the ZMR250 Frame and ImmersionRC 200mW Transceiver. Fits to the front or rear.
Topics: R/C Vehicles, stl, ZMR250, thingiverse, ImmersionRC
3
3.0
Mar 13, 2021
03/21
by
Mark Norton (UKCD)
data
eye 3
favorite 0
comment 0
I WANTED TO MOUNT MY VIDEO TX UNDER THE DISCOVERY INSTEAD OF ON TOP FOR BETTER TRANSMISSION. MADE QUITE A DIFFERENCE UNDER THE FRAME. ALSO YOU CAN SEE MY SKID ADAPTOR WEDGES FOR MY OTHER THINGS.
Topics: thingiverse, ImmersionRC, stl, immersion_rc, 3D Printing
6
6.0
Mar 4, 2021
03/21
by
Terence Lee (yoowicked)
data
eye 6
favorite 0
comment 0
Printed with the front face at the bottom and no supporting is needed. It can be printed in PLA and TPU, I personally prefer TPU (harder one the best)
Topics: Flysight_FG01, rapidfire, DIY, thingiverse, ImmersionRC, stl
9
9.0
Apr 21, 2021
04/21
by
Phil (ps915)
data
eye 9
favorite 0
comment 0
15° Xiaomi Yi mount for the ImmersionRC Vortex 285 Racing Quad Use Zipties to mount Please upload a photo of your make. ------------------------------------------------------- This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact_ps915 Unterstützte meine Arbeit / Support my work: Thanks! =)
Topics: thingiverse, xiaomi, stl, R/C Vehicles, lens protect, vortex, mount, Xiaomi_yi, camera mount,...
13
13
Apr 16, 2021
04/21
by
glenn newton (maxed280)
data
eye 13
favorite 0
comment 0
Use 2mm cable ties and 3m tape to mount to frame in the center. Get the antenna nice and high. Still testing how this location performs but let me know.
Topics: thingiverse, stl, TBS_Discovery, ImmersionRC, R/C Vehicles
5
5.0
Mar 3, 2021
03/21
by
calum richings (Gzus11)
data
eye 5
favorite 0
comment 0
this is an a dapter part to attache the immersion rc rapidfire goggle module to the skyzone sky01 goggle. it is very basic and will require tome final tweaking to fit the goggle curves and as of now needs to be glued to the goggle shell.
Topics: Other, rapidfire, skyzone_goggle, thingiverse, ImmersionRC, stl
4
4.0
Mar 21, 2021
03/21
by
Amir Etemadieh (Zenofex)
data
eye 4
favorite 0
comment 0
This is my first attempt at a holder for the Immersion RC Uno5800 to mount to the Quanum FPV Goggles. Print is 3 pieces: 1 x Uno 5800 Holder 1 x Base To Back Connector 1 x Back plate Other parts required: 1 x m3 20mm screw 1 x m3 nut Cable management: Cables can be managed by wrapping around the rod between the holder and the lcd back.
Topics: quanum_goggles, fpv_goggles, stl, ImmersionRC_58Ghz_600mw_Tx_Case, 3D Printing, quanum,...
13
13
Apr 16, 2021
04/21
by
Jose Torre (soundsk)
data
eye 13
favorite 0
comment 0
Building my first multirotor, I designed some parts to get things how I wanted. This simple mount uses the same holes as the arm clamps on the Tarot 680 Pro and has holes to run zip ties and secure the transmitter.
Topics: Tarot_680_Pro, ImmersionRC_58Ghz_600mw_Tx, immersionrc, thingiverse, tarot, stl, fpv, R/C Vehicles,...
9
9.0
Mar 10, 2021
03/21
by
Coudurier Yves (yvescoud)
data
eye 9
favorite 0
comment 0
This camera mount is a remix of the one used in Dubai by the Tornado x blade team; it's deeper in order to protect the camera (HS1177, runcam swift or foxeer) during the crashes, especially with a 2.1mm lens. I use it on my 2 vortexes with HS1177 and I love it ABS is advised, but it works pretty well with flexible filament like ninjaflex
Topics: HS1177, ImmersionRC_Vortex, RunCam_Swift, stl, thingiverse, vortex_250_pro, Foxeer_XAT600M,...
