10
10.0
Apr 5, 2021
04/21
by
(3DWP)
data
eye 10
favorite 0
comment 0
--> Edit 2017-02-21: I added a version with break away support beams so now you can choose ''no support'' in your slicer.
Topics: supportless, 3d_scanner, candle, LED, Scans & Replicas, 3d_scan, light, celtic, thingiverse,...
8
8.0
Jan 20, 2021
01/21
by
(3DWP)
data
eye 8
favorite 0
comment 0
This is a 3D scan of a decorative skull (flower pattern). I sculpted and smoothed the mesh a bit and added a hollow version. You can use the hollow model as a lamp by adding an LED light. This scan was made by MandrakeImaging: https://sketchfab.com/models/024a09f6df6d43eb84b0c4e9c47a1879# https://www.3dwp.nl
Topics: skull, Decor, LED, lamp, thingiverse, lighting, decorative, stl, LED_light
9
9.0
Jan 18, 2021
01/21
by
(Arjen_Vrijlandt)
data
eye 9
favorite 0
comment 0
I've used a small fitting with a led bulp. Heat the tip of a metal hook from a coat hanger with a lighter/solder iron. Place the hook in the lamp and let it cool for a bit. My coat hanger hook is 3mm and worked fine.
Topics: hook, LED_light, Lampshade, lamp, Spotlight, hanging, coat_hook, thingiverse, Hanging_Light,...
4
4.0
Jun 11, 2021
06/21
by
(B76)
data
eye 4
favorite 0
comment 0
Summary glue the sailboats to rod with light house, light house hollow for led light insert pin & add rod for stand/ hopefully wind turn the sailboats
Topics: LED_light, sailboat, stl, thingiverse, windmill, lighthouse, garden
0
0.0
Aug 13, 2022
08/22
by
(BDIAS)
data
eye 0
favorite 0
comment 0
To Follow
Topics: Video Games, destiny, stl, thingiverse, LED_light, ghost
8
8.0
Jan 17, 2021
01/21
by
(BManx2000)
data
eye 8
favorite 0
comment 0
I designed this lamp to run off my 3D printer's power supply. It has pan, tilt and height adjustments. The lamp uses 12 volt power, or with different parts it can be 24 volt. Nominal power consumption is 3.6 watts. The power can be changed by using a different resistor, but be careful of overheating. Assembling this lamp requires soldering. The LED gets hot, so at least the lamp casing should be printed with a high temperature filament. The diffuser should be printed with transparent filament....
Topics: 12_Volt, Decor, LED, 24volt, lamp, 24v, thingiverse, light, 12v, stl, LED_light
3
3.0
Jun 6, 2021
06/21
by
(BeagleChristo)
data
eye 3
favorite 0
comment 0
This is a beagle lamp, with a compartment at the bottom to accommodate the following remote-controlled LED light (or one like it): https://www.aliexpress.com/item/32983679031.html?spm=a2g0s.9042311.0.0.5da44c4d7snB4o The face has a line across it--an artifact from the scanning process--that I never bothered to fix. (Sorry, the photos are terrible. IRL, the translucent PLA does a great job of diffusing the light from the LED.)
Topics: LED_light, LED, beagle, thingiverse, dogs, Scans & Replicas, stl, dog, pets
7
7.0
Mar 9, 2021
03/21
by
(Bielin)
data
eye 7
favorite 0
comment 0
+/- 50W +/- 4000 lm
Topics: thingiverse, moot, elo, flashlight, LED_light, LEDs, LED, Lol, bowei, flashlights, stl,...
5
5.0
Mar 5, 2021
03/21
by
(CDeviant)
data
eye 5
favorite 0
comment 0
**This is an adjustable LED mount for the Petsfang cooling duct.** Using a single 13.5/13.5mm LED cob, I was able to provide plenty of light directly to the nozzle of the printer. It can shift from the left/right/center, and rotate at the LED mount. It doesn't move at all during printing, it's very stable with just the single pivot arm. _________________________________________________________________________ You only need a few nuts/bolts. Exact list coming soon. A couple 2mm bolts for...
Topics: stl, hotend, 3D Printer Accessories, LED_light, creality_ender_3, lighting, Led_Holder, electrical,...
4
4.0
Mar 15, 2021
03/21
by
(Cowardlyduck)
data
eye 4
favorite 0
comment 0
3 LED Light bar mount for MTB handlebars. Use some M5 bolts for the Light and zip ties + rubber to mount to the bars. The 3 LED Light bar is a common 4" type like this: https://www.ebay.com.au/itm/4inch-9W-3-LED-6000K-Spot-Beam-Work-Light-Bar-Lamp-Suv-Boat-Offroad-Trucky3/402612411410?
Topics: LED_light, Sport & Outdoors, thingiverse, MTB_handle_bar, stl
7
7.0
Jun 11, 2021
06/21
by
(DL2DW)
data
eye 7
favorite 0
comment 0
Summary This is a holder for 30cm long LED Stripes (for example: https://www.ebay.co.uk/itm/201672190509). These are simply inserted laterally or clipped in from the front. The cable is then led through the holes to the back and comes out in the mounting rail of the printer. The whole is fastened with the enclosed hammer nuts and screws. Only the corresponding LED Stripe is needed and the connection for the 12V of the LEDs. Either you pull a cable to the control unit or cut the cable near the...
Topics: LED_light, Creality_CR-10s, CR-10S, led_strip, thingiverse, illumination, Led_Holder, stl
7
7.0
Jun 12, 2021
06/21
by
(DMRS3)
data
eye 7
favorite 0
comment 0
Summary Hi, This is a led holder to help at night, to read a book, to study, we can also use to illuminate the keyboard, etc !! So, I do not need to have the ceiling light on! 230mm/23cm height. :) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 0.3 Infill: 20-30%
Topics: LED_light, holder, thingiverse, LED, office_equipment, study, Led_Holder, stl
5
5.0
Mar 9, 2021
03/21
by
(Danksley)
data
eye 5
favorite 0
comment 0
Only guaranteed to fit over the remixed file. Slides into the top rails, will require removing your frame screws. No supports. Recommend brim. Model should be correctly oriented.
Topics: LED, stl, thingiverse, Ender_3, led_strip, Lampshade, LED_light, 3D Printer Parts
4
4.0
Apr 5, 2021
04/21
by
(DewilWar)
data
eye 4
favorite 0
comment 0
Universal holder (Led light) for Creality Ender 3. Easy to use, not nessesery to disassemble the printer.
Topics: thingiverse, LED, 3D Printer Accessories, Ender_3, LED_light, led_mount, creality_ender_3, stl,...
5
5.0
Jun 12, 2021
06/21
by
(DuoDetection)
data
eye 5
favorite 0
comment 0
Summary Here's my small tutorial for creating this moon lamps. I will read all comments. Please post your make ;) Download the texture you want (there are a lot from the solar system). Choose your photo and remove the background. Join both images with any photo editor (There isn't any link for this yet). Upload to the Litophane maker website and put your own settings. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: No Resolution: 0,1 Infill: 100% Filament: BQ easy...
Topics: LED_light, moon, diy, led, arduino, lamp, lighting, customizable, light, thingiverse, moonlamp,...
4
4.0
Apr 1, 2021
04/21
by
(Egghebrecht)
data
eye 4
favorite 0
comment 0
I wanted to make a cool larp ingame light based on a flashlight that looks awesome on an alchemist table, altar, ritual ground etc. For this purpose I used those standard ali express led flashlights you can get in many colours and which are very reliable. (added picture of this flashlight) It features a base piece that can be printed in a non translucent material and be painted for added realism that hides the flashlight. Multiple light up crystal or gemstones shapes ar available for the top...
Topics: LED_light, fantasy, thingiverse, Toy & Game Accessories, LARP, LED_Flashlight, lamp, stl
11
11
Apr 30, 2021
04/21
by
(Filopat)
data
eye 11
favorite 0
comment 0
Spindle light for Bridgeport milling machine with J-head. It uses one of those cheap 120mm led-rings from ebay or banggood. It's quite tight fit to led ring, so I just pressed the ring in and secured it with few drops of superglue. Three M3 screws holds it on milling machines head.
Topics: stl, bridgeport, Milling, LED_light, J-head, Machine Tools, thingiverse, milling_machine, Led
11
11
Mar 3, 2021
03/21
by
(FiveNights)
data
eye 11
favorite 0
comment 0
**Watch video for more info** https://youtu.be/HWAPdKYnt1M (how to make)
Topics: water powered, green, flashlight, green_energy, toy, thingiverse, free, 3D_Slash, free energy, 3d...
13
13
Apr 20, 2021
04/21
by
(FiveNights)
data
eye 13
favorite 0
comment 0
https://youtu.be/gGj00IX0Qfc In 1782, the Eye of Providence was adopted as part of the symbolism on the reverse side of the Great Seal of the United States
Topics: thingiverse, eye, design, Annuit C&oelig, ptis, lamp, LED_light, miniature, LED, Masoni,...
5
5.0
Mar 4, 2021
03/21
by
(GlouGlouFou)
data
eye 5
favorite 0
comment 0
A lamp holder destined to be place at the top of the frame of a Prusa i3 printer. The shade is tilted 22.5° to be assembled at the left side of the printer. You can mirror the shade to have a right-sided lamp. The 2 parts - frame holder and shade - are assembled together with 1x M3x8mm bolt. ## WARNING ! Only use LED light, a traditional light bulb could melt or burn the plastic ! ## Parts: - Frame Holder - Lamp Shade - G4 socket...
Topics: 3D Printing, stl, holder, lamp_holder, LED_light, lamp, prusa_i3, LED, prusa, thingiverse
5
5.0
Mar 21, 2021
03/21
by
(Ishta)
data
eye 5
favorite 0
comment 0
I own several remote controlled LED bulbs, which remotes are Practical Series II. Their dimensions are around 40mm x 85mm x 8mm. I designed 2 models to hold the remotes on the walls : 1 for a single remote, 1 for 2 remotes with a wall between the remotes. These are my first Fusion 360 projects. Fell free to give me any feedback, it would be much appreciated.
Topics: LED, stl, Household, LED_light, thingiverse, Led_Holder
9
9.0
Mar 18, 2021
03/21
by
(JonnyBrylcreem)
data
eye 9
favorite 0
comment 0
SLED light fitting to suit 24 LED board such as https://www.aliexpress.com/item/R1B1-Super-Bright-12V-White-Piranha-24-LED-Panel-Board-Light-Energy-Saving-Lamp/1363619363.html?spm=2114.13010608.0.0.Ri7ZjE I've used Transparent PETG for the diffuser I printed these parts with a 0.25mm layer height. The light base has a layer of this height ,blanking off the fixing holes, mid way up to act as support for the small holes above. It worked reasonably well when I printed the parts but some cleaning...
Topics: LED_light, lighting, LEDs, stl, thingiverse, DIY
14
14
Jan 10, 2021
01/21
by
(Jooxoe3i)
data
eye 14
favorite 0
comment 0
a led diffuser for a short piece from a WS2812 LED strip. tested with a 10mm wide, 60LEDs-per-meter strip - which puts one led roughly in the head region, and another around the stomach designed to be used with either: http://www.brickowl.com/catalog/lego-ghost-outfit-with-open-mouth-10173 or http://www.brickowl.com/catalog/lego-ghost-2588 the design comes in three variants: - no arms - arms which resemble cloth covered minifig-arms - and arms that can hold a lightsaber-thick rod or other...
Topics: thingiverse, Led_Holder, stl, lego_compatible, ghost, led_mount, LEGO, LED_light, Construction...
7
7.0
Mar 20, 2021
03/21
by
(Karmarag)
data
eye 7
favorite 0
comment 0
Quite effective and clean design for an illumination solution for 3Drag and K8200 printers. Needs 8 mm wide ledstrips. Glue them with hotglue to the lamp. Holes for wires are provided. Can be clamped to profiles and positioned according to preferences. Both left and mirrored versions attached. Printed in PLA as too long to avoid bending with ABS.
Topics: Illuminator, K8200, Ultimaker_Illumination_LED_Light_Platform, ledstrip, thingiverse, led, 3Drag,...
4
4.0
May 1, 2021
05/21
by
(KeiPi)
data
eye 4
favorite 0
comment 0
.... text is still in progess ...
Topics: stl, RGB_LED_Strip, lamp, LED_light, monitor_mount, LED_lamp, thingiverse, rgb_led, Gadgets
6
6.0
Jun 20, 2021
06/21
by
(Kimframes)
data
eye 6
favorite 0
comment 0
Led light base with threaded hemisphere shell. Powered by two LR44 batteries. Can be fitted with two 3 x 2 mm disc magnets. Video
Topics: light, led_candle, thingiverse, LR44, globe, LED_light, stl, Decor, LED, candle
6
6.0
Jun 21, 2021
06/21
by
(Kimframes)
data
eye 6
favorite 0
comment 0
"Almost useless" magnetic overlays for the Aputure AL-M9. Works best as a diffuser printed in either solid black or a translucent colored material. To be fitted with 3x2 mm disc magnets.
Topics: aputure, thingiverse, LED_light, stl, overlay, Camera, al-ml9, LED, magnetic
3
3.0
Jan 8, 2021
01/21
by
(Kro_60)
data
eye 3
favorite 0
comment 0
This is for mounting some LED light under my kitchen cabinets.
Topics: stl, Household, Bracket, LED Light, thingiverse
6
6.0
Mar 2, 2021
03/21
by
(Laizer)
data
eye 6
favorite 0
comment 0
Hi there Update: 26-09-2018: (v2) - Added Filament hole guide, and did some changes to the front, (rounded it off, and made it smaller) Also added printer name to it ;-) Needed some light for my i3 Mk3 printer. and couldnt find anything good. so made this. This has a led light bar on each side. No glue, or anything needed, the light bars, just snap into the frame, and stays there. Designed to fit snug, on the Prusa 3d printer frame. No filling, or anything needed, just print, and pop the led's...
Topics: led, PRUSA, usb, prusa_i3_mk2, prusa_i3_mk3, thingiverse, stl, light, filament_guide, led strip,...
5
5.0
Mar 5, 2021
03/21
by
(Looper)
data
eye 5
favorite 0
comment 0
I used the "Mounting system for Raspberry Pi camera" by Dvogonen for the base camera case and created, in Fusion 360, an add on to hold six IR LEDs. See attached image from Adafruit for how to wire up the LED to your Raspberry Pi. Base Camera Case https://www.thingiverse.com/thing:536828 Wiring Diagram https://learn.adafruit.com/cloud-cam-connected-raspberry-pi-security-camera/enclosure LEDs https://www.adafruit.com/product/388 Raspberry Pi NoIR Camera...
Topics: infrared, stl, LED_light, Raspberry_Pi, Led_Holder, LED, Electronics, raspberry_pi_camera,...
3
3.0
Jan 5, 2021
01/21
by
(Magnocain)
data
eye 3
favorite 0
comment 0
I got the idea of this from a Garand Thumb video, where he mentioned putting a headlamp on a chest rig or plate carrier to be able to see hands free.. This lets you attach a particular flashlight to your MOLLE/PALS webbing. The files include 2 orientations, horizontal and vertical. I also made copies where the "teeth" that hold on to the MOLLE switch direction (more secure), and one where are the same direction (easier to install). This clip will fit the $14 flashlight on Amazon shown...
Topics: flashlight, flashlight_mount, stl, LED_light, tactical, molle_webb, plate_carrier, 90_degree,...
4
4.0
Jun 21, 2021
06/21
by
(MakingStuff3D)
data
eye 4
favorite 0
comment 0
Occasionally you come across something in a video game that you just have to make youself. This Shield Cell from Apex Legends is roughly to scale(emphasis on roughly) and is very easy to print. I'm very pleased with how it turned out. There is definitely room for improvements on it, and I encourage anyone with better skills to remix it and make it even better! It was made to be a light up display to have next to my computer. So, it doesn't have any special internal mechanisms to make it move...
Topics: apex legends prop, thingiverse, titanfall, LED_light, stl, Shield _Cell, 3D Printing, decor,...
3
3.0
Jun 7, 2021
06/21
by
(MakingStuff3D)
data
eye 3
favorite 0
comment 0
Occasionally you come across something in a video game that you just have to make youself. This Shield Battery from Apex Legends is roughly to scale(emphasis on roughly) Standing at about 420mm, it feels great and looks exactly as I hoped. I'm very pleased with how it turned out. There is definitely room for improvements on it, and I encourage anyone with better skills to remix it and make it even better! It was made to be a light up display to have next to my computer. So, it doesn't have any...
Topics: LED_light, prop, LED, shield, battery, thingiverse, shield_battery, Video Games, stl, cosplay_prop,...
4
4.0
Mar 18, 2021
03/21
by
(Marcus24)
data
eye 4
favorite 0
comment 0
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 3D Assembly: https://a360.co/2YoMFZ9 - V Shape Triangle aluminum profile (16mm x 16mm) - Color LED Strip - Arduino - Adafruit microphone - DC panel connector (DC13A or DC13B) - Power Switch (KCD11) - Control Button - Push Switch Button (6x6x7mm) - 3x 18650 Battery - 3x M3x12mm screws - 2x M2x8mm screws (for DC connector) - PCB (for control button) - hot glue gun (to mount microphone in place) - etc Started...
Topics: Led_Holder, Electronics, music_visualization, VU_Meter, led_mount, thingiverse, adafruit,...
7
7.0
Jun 11, 2021
06/21
by
(Marcus24)
data
eye 7
favorite 0
comment 0
Summary I made this for Tevo Tarantula, but it should fit to every 3D printer which uses 2020 aluminium frame. The lenght of the holder is 30 cm. I use this LED strip holder as main light for my printer in the night. It is made from two parts and I mounted it to 2020 tarantula frame with 4 screws and T-nuts. It is suitable for 5 LED strips and it shines a lot. I used power slide switch for control the light. (Light is turned off on the second picture.) Parts 4x M4x8 Screw 4x T-nut M4 1x slide...
Topics: 2020, e3d_tevo_tarantula, led_strip, reprap, LED_lamp, LED_Lighting, LED_light, tarantula,...
4
4.0
Mar 5, 2021
03/21
by
(MegaSaturnv)
data
eye 4
favorite 0
comment 0
Modified to fit the A10M. No screws / non-printable materials needed. To fit the 220mm wide print on a 220mm print bed, rotate the model 45 degrees do it goes diagonally across the bed. My bed is curved and mesh bed levelling is a bit hit and miss at the moment, so I had to print without rotating the model. If you decide to do this, you will need to use the full 220mm x 220mm build volume (technically the build volume of the A10M is 235x235mm, but most people will be printing in the default...
Topics: A10M, stl, 3D Printer Accessories, LED_light, Led_bar, led_strip, geeetech_A10M, LED, light,...
5
5.0
Mar 5, 2021
03/21
by
(MegaSaturnv)
data
eye 5
favorite 0
comment 0
I really liked Hermiedug's original design but my A10M had a slightly smaller print head at 51.2mm (centre - centre of metal frame). There is an extra stl file supplied to test if this design will fit your printer without printing the full model. Remix changes: * Shortened the width to 51.2mm (centre - centre of metal frame) * Tapers the gaps towards the top so it grips the frame really well * Made the design symmetrical * Added cable tie / wire tie mounts to each side. After printing it can be...
Topics: A10M, stl, 3D_printing, LED_light, geeetech_A10M, LED, light, 3D Printer Parts, thingiverse
5
5.0
Apr 20, 2021
04/21
by
(MikeT71)
data
eye 5
favorite 0
comment 0
Lighthouse for a christmas present. Used three leds and an arduino nano to make the light work. Stands about 7 inches high and is printed in two parts
Topics: thingiverse, stl, Sculptures, lighthouse, LED_light, sculpture, led
4
4.0
Jun 11, 2021
06/21
by
(Mohamed-Ayobe)
data
eye 4
favorite 0
comment 0
Summary I had print the head and the Body with the same Moon profile . Using hot air gun to make sure the eye's is curved . How I Designed This Using Fusion 360
Topics: LED_light, decor, lamp, thingiverse, panda, stl
9
9.0
Mar 17, 2021
03/21
by
(NVNDO)
data
eye 9
favorite 0
comment 0
The platform can be either used to just cover-up the under-part of the stock Extruder box, or like I did install self-adhesion LED-strips and wire them up. There is sufficient play to install little rubberrings to avoid vibrations from the fan. The cable holes are designed to fit standart 1,27mm Pitch Dupont-cable. The 4.8W LED-stripe I used is quite bright… I placed a 990ohm resistor on the + wire to reduce brightness and reflection on the print-bed. Have fun building!! Would appreciate some...
Topics: light, Anycubic, LED, Anycubic_I3_Mega, i3Mega, extruder, 3D Printer Accessories, platform, stl,...
3
3.0
Apr 4, 2021
04/21
by
(NarlyB)
data
eye 3
favorite 0
comment 0
A LED light holder for The Prusa Mini This attaches to the back 3030 Z axis post. Uses The 3030 Latch 4-11-2020 found: https://www.thingiverse.com/thing:4278626 The LED Light I purchased at Home Depot Brand: Commercial Electric #1000 468 981 White I paid about $12.00 for three. The use 3 AAA batteries
Topics: thingiverse, 3D Printer Accessories, LED_light, Prusa, Light, stl, prusa_mini
4
4.0
Jan 6, 2021
01/21
by
(NightPueo)
data
eye 4
favorite 0
comment 0
I've been using a fluorescent desk lamp to illuminate my print bed. But I found that when I turned off the lamp, it would reset the printer. Both are plugged into the same power strip so there must be some type of power glitch that resets something. A 12" LED light bar popped up during the last Amazon Prime Day and I picked it up. While looking through Thingiverse, I found Venegade's design. I printed it out but found that the light bar was loose. I also wanted the bar captured on all four...
Topics: stl, led_bar_mount, LED_light, 3d_printer, Artillery_x1, LED, Artillery_swx1, thingiverse,...
4
4.0
Mar 16, 2021
03/21
by
(Nivekt)
data
eye 4
favorite 0
comment 0
Mounting Clip for LED Strips - works standalone or together with double-sided adhesive tape - can be used with screws or nails - posibile to mount on top of SMD resistors - supports a maximum LED strip width of 12 mm Current Versions: - IP20 1 Hole - IP20 2 Holes - IP65 versions coming soon Note: I designed this 3D object with FreeCad and provide the file so you can make your own version or export it to a file format that your software of choice supports.
Topics: led_strip, led_5050, LED_light, thingiverse, led_mount, LED, mount, mounting_bracket, Electronics,...
10
10.0
Jun 12, 2021
06/21
by
(OBUQ)
data
eye 10
favorite 0
comment 0
Summary A modular cube w/ LED - presence lamp. Designed for 3mm MDF. You'll need a dual AAA battery case, small on/off button and 2 LEDs (or one or four, your choice). You'll also need to glue some colored thin paper on the sides of the cube. Very similar to "cube lamp" project. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design This project was made on FabLab Lisbon: fablablisboa.pt
Topics: LED_light, laser_cutting, laser, lamp, light, thingiverse, LED, lasercut, laser_cutter,...
9
9.0
Jun 11, 2021
06/21
by
(OBUQ)
data
eye 9
favorite 0
comment 0
Summary A small presence lamp. Designed for 3mm MDF. You'll need a dual AAA battery case, a small on/off button and two LEDs. To hold the LEDs on this one, you can either use the chimney looking parts or use the other two small pieces, for each side of the battery case container. You'll also need to glue some colored thin paper on the sides. Very similar to "Cube lamp" project. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design This project was made on FabLab Lisbon: fablablisboa.pt
Topics: LED_light, laser_cutting, laser, lasercutter, lamp, light, thingiverse, laser-cut, lasercut, LED,...
9
9.0
Jun 11, 2021
06/21
by
(OBUQ)
data
eye 9
favorite 0
comment 0
Summary A small cube w/ LED - presence lamp. Create your own drawing on the faces of the cube! Several available for you to try out! Designed for 3mm MDF. You'll need a dual AAA battery case, small on/off button and 2 LEDs (or one or four, your choice). See "instructions battery box.pdf". You'll also need to glue some colored thin paper on the sides of the cube. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design This project was made on FabLab Lisbon: fablablisboa.pt
Topics: LED_light, laser, lasercutter, lamp, light, thingiverse, laser-cut, LED, lasercut, laser_cutter,...
8
8.0
Jun 11, 2021
06/21
by
(OBUQ)
data
eye 8
favorite 0
comment 0
Summary A small LED presence lamp inspired in a cathedral. Designed for 3mm MDF. You'll need a dual AAA battery case, small on/off button and 2 LEDs (or one or four, your choice). You'll also need to glue some colored thin paper on the sides. Very similar to "cube lamp" project. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design This project was made on FabLab Lisbon: fablablisboa.pt
Topics: LED_light, laser_cutting, laser, lasercutter, lamp, light, thingiverse, laser-cut, lasercut, LED,...
9
9.0
Jun 11, 2021
06/21
by
(OBUQ)
data
eye 9
favorite 0
comment 0
Summary Two small presence lamps, one of them a skyscraper, the other a normal urban building. Designed for 3mm MDF. You'll need a dual AAA battery case, small on/off button and 2 LEDs. You'll also need to glue some colored thin paper on the sides. Very similar to "Cube lamp" project. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design This project was made on FabLab Lisbon: fablablisboa.pt
Topics: laser_cutting, laser, lasercutter, lamp, urban, light, thingiverse, laser-cut, lasercut, LED,...
8
8.0
Jun 11, 2021
06/21
by
(OBUQ)
data
eye 8
favorite 0
comment 0
Summary A simple lamp design that takes advantage of the acrylic's light refraction. You have two versions: A: enclosed acrylic B: you can replace your engraved acrylic Designed for 3mm in MDF and 5mm acrylic. Kerf compensation for a 150w glass tube laser. Enjoy! Give OBUQ a like on fb: www.fb.com/obuq.design
Topics: LED_lamp, engraving, led_light, lasercutting, refraction, acrylic, light, thingiverse,...
4
4.0
Apr 1, 2021
04/21
by
(Petclaud)
data
eye 4
favorite 0
comment 0
Modified the top cover (wide body as made by Lupo77) such that it can hold 4 cheap LED's. I did not wanted to reprint the entire front of the tank and in the same time did not want to stick anything on top of the tank (my kids sometimes flip it while driving) and hence designed this cover. Original Tank design: https://www.thingiverse.com/thing:2414983 Wide Body: https://www.thingiverse.com/thing:2983973 LED RC switch:...
Topics: StainD, thingiverse, LED, R/C Vehicles, RC Tank, led light, stl
