4
4.0
Jan 7, 2021
01/21
by
Johnathan Chamberlain (triaxisprinting)
data
eye 4
favorite 0
comment 0
Mount for a Mean Well LRS-350 series power supply allowing it to be mounted flat to the underside of a desk, on a wall, etc. I also designed an integrated shroud (based on: thing:4631303) which seems to dampen the sound of the PSU fan. Hardware needed: - One of the following: - 4x M4x4 countersunk screws (UNTESTED) - Mounts the PSU to the holder - OR 4x M4x6 Socket Cap screws - 3x M3x8 - For mounting the fan shroud to the PSU mount - 3x M3 hex nuts - For mounting the fan shroud to the PSU mount...
Topics: stl, MeanWell_LRS_350_24, MeanWell_LRS_350_5, MeanWell, MeanWell_NES-350-12, thingiverse,...
1
1.0
Jan 18, 2022
01/22
by
Ivailo Tsanev (ivtcho)
data
eye 1
favorite 0
comment 0
As the stock cooling fan for the is quite loud, I decided to install a Noctua NF-A6X25, however the PSU case doesn't have enough clearance for a bigger fan. This mod actually will work for any 6025 fan, but keep in mind that the original one is about 16 cfm, or 27 m3/h. Although the PSU doesn't run very hot and the fan is not switched on at all times, you still might consider this parameter when choosing a replacement. **Print notes** ----------- Turn off suports when printing, as the few...
Topics: 3D Printer Parts, MeanWell_LRS_350_24, thingiverse, Anycubic_4Max_PRO_V2, MeanWell_LRS_350_12,...
2
2.0
May 1, 2021
05/21
by
Remon Pel (rmpel)
data
eye 2
favorite 0
comment 0
I have re-remixed my own design to exact dimensions with extras; The previous design fits well, but is 200 mm long. The original lid is 198 mm long. Also, the with is corrected from 110 mm to 111 mm (* for tolerances I made it 110.8) The result is that my connector guard doesn't fit very well. Also I found myself missing the indicators for +/- and Live/Neutral/Ground.
Topics: stl, PSU, MeanWell_LRS_350_12, fanless_PSU, MeanWell_LRS_350, 3D Printer Accessories, thingiverse,...
3
3.0
Mar 8, 2021
03/21
by
Drucki MCDruck (DruckiMCDruck)
data
eye 3
favorite 0
comment 0
This is a simple PSU bracket to mount Meanwell LRS 350 24 or Meanwell RSP 300 series powersupplies to 2040 aluminium extrusions. Two versions are available, depending on the orientation of your extrusions. This thing was created with full compatibility to oderwats WellFan mod (https://www.thingiverse.com/thing:2967389) in mind. The holes to fix the brackets to the extrusions fit M5 screws, either DIN912 M5x8 or M5x10 should fit. Use washers if neccessary. As usual, STEP and STL available and...
Topics: stl, thingiverse, MeanWell_LRS_350_24, mean_well, MeanWell, 3D Printer Parts, MeanWell_LRS_350
2
2.0
Jan 4, 2021
01/21
by
Nikola Antoš (NlKO33)
data
eye 2
favorite 0
comment 0
A quite universal (requires 4xM4x10 bolts and 4xM4 screws) mount for Meanwell-LRS-350 series PSU. Holding screws are hidden within the mount for hers&your pleasure (aesthetic lvl over 9000) in a pocket slanted 40 degrees. I'd suggest at least PETG for the print, since the PSU enclosure sinks some heat, but if you're feeling frisky PLA might be okay. Suggested order of operations - mark where you want to mount your PSU - screw in right or left holder (orientatiton kind of counts here, be...
Topics: stl, MeanWell_LRS_350_24, holder, PSU_Mount, thingiverse, MeanWell_LRS_350, 3D Printer Accessories
6
6.0
Jan 3, 2021
01/21
by
Paul S. (Paul_GD)
data
eye 6
favorite 0
comment 0
I took Kotze101's Cover and edited printaway's back cover to be slimmer and have holes so it kinda replicated the way the original power supply was mounted on the Kossel. Additionally, I made a 2020 mount inspired by jbanion's. Yea that's it basically.
Topics: stl, MeanWell_LRS_350-12, 3D Printer Parts, kossel, anycubic, thingiverse, MeanWell_LRS_350,...
2
2.0
Mar 15, 2021
03/21
by
Irnie Eugenio (Monkichi57)
data
eye 2
favorite 0
comment 0
As I have received feedback from my other PSU design. I modified it to match the screw hole mount in the upright and moved the socket to clear the adjustment screws on the bed. I used a Ender 3 Pro CAD Model to modify my previous design, so hopefully it clears everything. If you do print it out, please let me know if it does/doesn't and I will try to modify as needed. And please post a make if possible. I appreciate the feedback and hope it helps. Thanks!
Topics: MeanWell_LRS_350, thingiverse, Ender_3, 3D Printer Parts, stl, Ender_3_Pro, MeanWell_LRS_350_24
2
2.0
May 1, 2021
05/21
by
Frederic Harms (Sailelectronics)
data
eye 2
favorite 0
comment 0
------- deutsch / german ------- (scroll down for english) Bei den Original-Designs hat mich das "stehende" Drucken gestört, weswegen ich angefangen habe das Design komplett zu überarbeiten. Deswegen besteht die Abdeckung nun aus drei miteinander verschraubten Teilen. Desweiteren habe ich auch ein Design für einen 60mm (original MW Lüfter) erstellt. Enthaltene STL-Datein: 60mm_PSU_Cover 80mm_PSU_Cover 60mm_FAN_Cover 60mm_FAN_Cover_with_GRID 80mm_FAN_Cover 80mm_FAN_Cover_with_GRID...
Topics: stl, creality_ender_3, Creality, Ender_3, MeanWell_LRS_350_Case, Ender3v2, silent,...
3
3.0
Jan 6, 2021
01/21
by
Alan Mandic (MandicReally)
data
eye 3
favorite 0
comment 0
Simple mounting feet for the Meanwell LRS-350-24 I used in a build. This allows the power supply to be mounted flat on it's back. Bolts to the sides of the Meanwell Power supply with M4 bolts and also locks into the grooves next to the factory threaded holes so it won't rotate. The tabs that fit into the opening are a tight fit, but that is the point. You can shave them a little bit if necessary. I printed this without support on my Ender 3 in PLA. Constant airflow of the Power Supply fan...
Topics: stl, MeanWell_LRS_350_24, MeanWell, 3D Printer Parts, power_supply, thingiverse, MeanWell_LRS_350,...
2
2.0
Apr 2, 2021
04/21
by
Kendall Payne (Kendalf)
data
eye 2
favorite 0
comment 0
This is a custom cover I designed to mount a 120mm PC case fan in place of the 60mm fan included in the Mean Well LRS-350 power supply (mine is a 24V PSU, but it will work just fine with the 12V PSU). There are several designs available for mounting 80mm and 92mm fans, but I happened to have some extra 120mm PC case fans available. Most 120mm case fans should work, though you'll want to check for clearance for the fan wiring, which needs to go inside the case. This power supply goes at the...
Topics: Fan_mount, thingiverse, cooling_fan, 3D Printer Parts, MeanWell_LRS_350_24, MeanWell_LRS_350,...
3
3.0
Mar 12, 2021
03/21
by
Jeremy Tan (jtkw)
data
eye 3
favorite 0
comment 0
Modified the original cover by dermatin. Changes made: - adapted to 92mm fan - threads removed from screw holes + size adjusted (easier to print + threads will be tapped by the PSU screws) - slim/fast fan guard for the 92mm fan I used the 2 fan screws from the original fan on the Meanwell PSU and routed the cable through one of the 2 empty screw holes. The fan on mine was a 12v fan. f3d file is included should you wish to make any changes.
Topics: 3D Printer Parts, thingiverse, silent, Creality, MeanWell_LRS_350_24, Ender_3, MeanWell_LRS_350,...
2
2.0
Jan 4, 2021
01/21
by
mark woestenburg (StickZ_)
data
eye 2
favorite 0
comment 0
When hanging the power supply, the powerplug "hanging" did not work for me,
Topics: stl, MeanWell_LRS_350_24, MeanWell, 3D Printer Parts, Ender_3, thingiverse, MeanWell_LRS_350,...
2
2.0
Jun 11, 2021
06/21
by
prateek rajbhandari (prateekrajbhandari)
data
eye 2
favorite 0
comment 0
The original PSU that came with my Prusa died prematurely. I did not want to get the replacement PSU through Prusa. I opted for an upgrade instead with better thermal management and components. But as luck would have it, my Meanwell PSU came with an un-excorsised built in fan that screeched when excited. This top plate is for replacing the stock fan with a 90mm case fan. In my case I used a Noctua. Please remember to hold on to the screws that comes with the PSU. They self thread into the...
Topics: thingiverse, MeanWell_LRS_350_24, Electronics, stl
3
3.0
Mar 17, 2021
03/21
by
IB De (fishku)
data
eye 3
favorite 0
comment 0
The original PSU on my A10M died, so I had to get a replacement. I went with a MeanWell LRS-350-24. None of the designs I found online were quite to my liking, so I made a new one. With this design, the PSU will sit flush against the printer frame. You can use the original screws and holes from the original PSU for the replacement one.
Topics: geeetech_A10M, geeetech, MeanWell_LRS_350_24, Geeetech_A10, 3D Printer Parts, stl,...
3
3.0
Mar 9, 2021
03/21
by
Bernd Dasbrot (pacman42)
data
eye 3
favorite 0
comment 0
I took the Fusion360 source and changed following things: - made a removable hexagon fan grill - changed the lower grill to hexagons and moved it as far down as possible - added holes to be able to screw the halves together with M3 screws - moved the power connector a bit up and to the back (will be a tight cable fit!) - opened one hole on the bottom - rounded the corners The fan grill will not fit the original thing! Part3 is unchanged Regarding the photo: I damaged the part while removing it...
Topics: hexagon, stl, thingiverse, 80mm_fan, MeanWell_LRS_350_24, Ender_3, 80mm, 3D Printer Parts,...
1
1.0
Nov 8, 2021
11/21
by
Peter Irvin (pjmi)
data
eye 1
favorite 0
comment 0
This is a simple, slim end cover box for a Mean Well LRS-350-24 PSU (power supply unit) so that it can be used more safely as as desktop 24V supply. I use it to power my ToolkitRC M8S LiPo charger, amongst others. It has cable holes with grips for a typical mains cable input and 2x AWG12 silicone flexible wires output (mine to an XT30 connector). I just use the cable with plug from a cheap extension cable and wired up some AWG12 silicone cable and XT30 female connector fo 6th output. Obviously,...
Topics: 3D Printing, stl, MeanWell_LRS_350_24, thingiverse
3
3.0
Mar 22, 2021
03/21
by
Yannick Persigoux (Kyosuke)
data
eye 3
favorite 0
comment 0
Just a simple remix. Not necessary i think, but fun. Use Noctua 60mm to push fresh air inside and Noctua 92mm to extract hot air.
Topics: MeanWell, stl, 3D Printer Parts, MeanWell_LRS_350, thingiverse
1
1.0
Sep 13, 2021
09/21
by
John Moery (jmoery)
data
eye 1
favorite 0
comment 0
Simple input/output cover for Meanwell LRS-350 series power supply. Cover is tooless and attaches to the factory screw holes via pins. Quick to print and easy cover. Printing: Material: PLA Layer Height: 0.24 Infill: 12% Top/Bottom Layers: 3 Walls: 3 Supports: none
Topics: stl, thingiverse, MeanWell_LRS_350, power_supply_cover, Electronics
2
2.0
Jan 5, 2021
01/21
by
Michael Potyandy (Cruckman4)
data
eye 2
favorite 0
comment 0
Holder for a Meanwell 48V power supply for powering Unifi switches for a mini server rack. Includes a cutout for a rocker on/off switch, such as: https://www.amazon.com/gp/product/B00OK901GK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Topics: stl, Computer, unifi_switch, thingiverse, unifi, MeanWell_LRS_350
2
2.0
Jan 9, 2021
01/21
by
chris linzg (linzg)
data
eye 2
favorite 0
comment 0
A year ago when i started tinkering with my new ender 3 pro i printed a PSU Fan Cover designed by Knarf2807 (thanks buddy) to fit a 80x80x25 noctua inside and reduce PSU noise. On one hand i was not happy with a mounted psu plus had the goal to print a stand. On the other hand i liked the features of shelly1pm (power/temp monitoring with sensor addon). So I combined both in my first real from scratch design. After printing and putting my final box draft together i realised the need for a simple...
Topics: Shelly, thingiverse, stand, socket, stl, 3D Printer Parts, mount, MeanWell_LRS_350_24, PSU,...
3
3.0
Mar 22, 2021
03/21
by
A A (PM_ME_YOUR_VALUE)
data
eye 3
favorite 0
comment 0
When I replaced my default power supply with the meanwell LRS 350, the holder for the power supply had a gap that needed filling. I didn't want to re-print the whole shroud, so this spacer screws into the hole that the old power supply used. I put a 10mm M4 screw on the inside, slide it in the hole of the current shroud, and tighened a bolt on the back. Prevents the shroud from moving and blocking the print bed, also stops little items from falling in.
Topics: ender 3, stl, mean well, Ender, MeanWell_LRS_350_24, meanwell, 3D Printer Parts, MeanWell_LRS_350,...
2
2.0
May 1, 2021
05/21
by
Remon Pel (rmpel)
data
eye 2
favorite 0
comment 0
Remix that is an easier print; Instead of honeycombs, which are slow to print, I have added alternating lines of 1.2 mm wide, 0.2 mm high. When printed on 0.1 or 0.2 layer height, the nozzle will have to move only diagonally in 1 direction every layer (0.2) or every 2 layers (0.1). This saves time and filament and because 0.2 layer height is not that much, the resulting grid is surprisingly solid :) Also added the Mean Well logo. Hopefully the letters survive removal from build plate. I print...
Topics: stl, PSU, fanless_PSU, 3D Printer Parts, MeanWell_LRS_350, MeanWell_NES-350-12, thingiverse,...
2
2.0
Apr 1, 2021
04/21
by
Nirvash 12 (Nirvash12)
data
eye 2
favorite 0
comment 0
This is just a small modification of `WellFan-Part2.stl`. Go grab Part 1 and 3 from [here](https://www.thingiverse.com/thing:3644667)! *** I have my printer in a tight spot and the recessed hole that [pacman42](https://www.thingiverse.com/thing:3644667) did would bring my printer dangerously close to the front edge of my desk, so I moved the big square hole to the front! :) I also added more vent holes and an alternative cable hole on the back. As you can see, this remix was all about them...
Topics: PSU_Cover, creality_ender_3, thingiverse, 3D Printer Parts, MeanWell_LRS_350_24, Ender3,...
2
2.0
Mar 15, 2021
03/21
by
Chris Koe (TryFailLife)
data
eye 2
favorite 0
comment 0
This is just a simple, lowpoly model of the MEAN WELL LRS-350 power supply (12 and 24 V). Designed using Mean Well's dimensional data and some of my own measurements. Have fun using it in your own projects. :-)
Topics: mean_well, MeanWell_LRS_350, thingiverse, BMW, lrs, LRS-350-12, Ender_3, MeanWell, stl, 3D Printer...
5
5.0
Jan 21, 2021
01/21
by
Greg Steeves (styk)
data
eye 5
favorite 0
comment 0
Had to replace my original power supply for my Hictop 3DP-17. Ordered a MeanWell LSR-350-24. Slifghtly different dimensions from stock and only about 1/2 as thick. So my power cover i designed for teh original no longer offers the same protection from the power terminal strip.
Topics: MeanWell_LRS_350, 3D Printer Accessories, thingiverse, HICTOP, stl
4
4.0
Mar 18, 2021
03/21
by
manuel schreder (Manuel_Schreder)
data
eye 4
favorite 0
comment 0
External Support for LRS-350 series - MEAN WELL PSU on ENDER 5 Advantages : - You can now easily put a Noctua fan (12V) on it and remove the noisy one - The PSU and the supports will reinforce the frame Version 1.0 *supports are only for the bottom part
Topics: Creality, 3D Printer Parts, stl, MeanWell_LRS_350, thingiverse, Ender5
3
3.0
Mar 8, 2021
03/21
by
Paul Arnold (PaulArnold)
data
eye 3
favorite 0
comment 0
Suitable for Orballo or standard P3Steel frame. Print holder.stl with support. Use one M3 screw through the frame to attach PSU to frame and 2 M4 screws to attach cover to PSU. Suitable for standard IEC plug and 19 x 13 (ish) switch
Topics: P3steel, stl, thingiverse, MeanWell, 3D Printer Parts, MeanWell_LRS_350
2
2.0
Jan 6, 2021
01/21
by
Daniel Edwards (jerryfudd)
data
eye 2
favorite 0
comment 0
Remix Source: * https://www.thingiverse.com/thing:3530938 Changes: * Removed Grill Required: * Supports
Topics: cover, power_supply_cover, stl, MeanWell_LRS_350_24, MeanWell, 3D Printer Parts, power_supply,...
2
2.0
Apr 27, 2021
04/21
by
Yannick Persigoux (Kyosuke)
data
eye 2
favorite 0
comment 0
Just a simple remix. Not necessary i think, but fun. Use Noctua 60mm to push fresh air inside and Noctua 92mm to extract hot air. Add 2020 attachement
Topics: AM8, thingiverse, 3D Printers, MeanWell, MeanWell_LRS_350, 2020, stl
2
2.0
Apr 24, 2021
04/21
by
Manuel Mendoza (Manny21111)
data
eye 2
favorite 0
comment 0
designed for the k280 and based on TH3D's Ender 3 cover design! I moved the outgoing cable hole to the side and added additional holes for securing the PSU to the cover! you can cut off part of the top if you need to fit it to a certain printer height
Topics: he3d, HE3D_K280, MeanWell_LRS_350, replacement, 3D Printer Parts, k280, PSU_Cover, PSU_Mount,...
2
2.0
Oct 15, 2021
10/21
by
(EmbeddedInvented)
data
eye 2
favorite 0
comment 0
This is a bracket to mount a MeanWell LRS-350 power supply on it's side vertically. I designed this mount to be simple and conscious of the vent holes. The two brackets for one power supply are identical. it has countersunk holes for mounting with wood screws. This mount is fairly strong, however it does have some flex and I would not trust it in an extremely rough environment where a lot of strain will be put on the brackets. To mount it you will need two m4 bolts with length ~5.5mm and 4...
Topics: MeanWell_LRS_350, thingiverse, Vertical, stl, mount, Electronics, sideways, MeanWell
1
1.0
Aug 22, 2021
08/21
by
Wayne Weng (WayneWeng)
data
eye 1
favorite 0
comment 0
Topics: psu mod, lrs, 3D Printer Accessories, psu cover, MeanWell, cover, MeanWell_LRS_350_24,...
5
5.0
Mar 16, 2021
03/21
by
Derrick Smith (Deneteus)
data
eye 5
favorite 0
comment 0
After seeing some of the designs on Thingiverse copied from the original PSU case I printed a couple and they didn't have the features I wanted so I made my own from scratch. I used the official 3D model for the LRS-350-24v Meanwell PSU for reference for all of the holes. What I needed was: * Easy access to the terminal strip screws and power adjustment. * Enough space for the horribly designed Power Panic PCB wiring. * A visible 3 segment voltmeter. * Vent holes for the air flow. * A centrally...
Topics: #Fusion 360 DIY, prusa_i3_mk3, MeanWell_LRS_350_24, MeanWell, 3D Printer Parts, stl,...
2
2.0
Jun 11, 2021
06/21
by
falk schwanke (blkhawk)
data
eye 2
favorite 0
comment 0
Modification of the Original part deleting the silly power plug hole. Just unhook the PSU cable from the fan and route it through the fan hole. You should shorten the cable and reuse the sleeve from the Original fan anyway for safety.
Topics: Electronics, PSU_Cover, cooling, thingiverse, MeanWell, MeanWell_LRS_350, PSU, stl
3
3.0
May 1, 2021
05/21
by
Michael Eckman (Meckman)
data
eye 3
favorite 0
comment 0
I remixed this so that it puts the back of the Meanwell LRS up against the wall of the ammo can, and the fan facing in towards the middle. I printed the original design, and it was reverse of what I wanted. Remixed it with tinkercad. I used M4 x 8 bolts. I found that attaching the bottom first then the back had that best results since the holes are have tight tolerances.
Topics: stl, christmas, DIY, Harbor_Freight, pixels, MeanWell_LRS_350, thingiverse, MeanWell
2
2.0
Mar 15, 2021
03/21
by
Derek Osborn (djos_1475)
data
eye 2
favorite 0
comment 0
This is a Remix of the "Power supply mod for the Ender 3" by Proper Printing. https://www.thingiverse.com/thing:3773553 This power supply mod locates the Mean Well LRS-350 Power Supply at the back of the printer keeping things neat and tidy. As the PSU is behind the printer, it means you can easily install a Dual Z-Lead Screw setup. Only the Left bracket has been modified to suit the different frame design of the Mega Zero v1.0, the Larger Right side bracket is the same. Installation:...
Topics: MeanWell_LRS_350, thingiverse, anycubic_mega_zero, stl, 3D Printer Parts
1
1.0
Sep 14, 2021
09/21
by
Rick Bello (Doc691)
data
eye 1
favorite 0
comment 0
This is a DIN rail mounting bracket for the Meanwell LRS 350 power supply that uses the 4mm mounting holes on the back of the power supply. This mounts the power supply horizontally if your DIN rails are horizontal. STLs with and without beveled holes are provided. Printing: Print 2 parts with 4 vertical shells and 40% infill
Topics: stl, Meanwell, thingiverse, MeanWell_LRS_350, LRS 350, 3D Printer Parts
5
5.0
Jan 19, 2021
01/21
by
Print Away (printaway)
data
eye 5
favorite 0
comment 0
This is a back cover for the [Anet A8 PSU Cover by Kotze101](https://www.thingiverse.com/thing:2237395), which is really a cover for the Meanwell LRS-350-12. The wires on the back of my power switch stuck out so the PSU couldn't sit flat against my printer, so I wanted to make sure the back wasn't exposed. I made this back cover for it to make sure nothing could touch the super dangerous AC voltage accidentally. This back cover is friction fit, and should fit nice and snug into the front cover,...
Topics: 3D Printer Parts, MeanWell_LRS_350, stl, thingiverse, mean_well, MeanWell
2
2.0
Mar 13, 2021
03/21
by
Alessandro Fantini (bigsub)
data
eye 2
favorite 0
comment 0
I need a cap to protect wires of a Meanwell PSU. The cap is fixed aside on the chassis, without any screws. I printed in PETG, but it could be also printed in PLA.
Topics: 3D Printer Parts, thingiverse, cap, stl, MeanWell_LRS_350_24, MeanWell
4
4.0
Aug 9, 2021
08/21
by
Mehmet Geziyor (mehmetygtx)
data
eye 4
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: Stoage_Box, thingiverse, kutu, 3D Printing, Heart, MeanWell_LRS_350, stl
2
2.0
Jan 9, 2021
01/21
by
Michael Weimer (sachbearbeiter)
data
eye 2
favorite 0
comment 0
Strong wall mount for the Meanwell LRS 350 power supply. For protection I added a cover for the terminals.
Topics: thingiverse, power_supply, stl, 3D Printer Parts, hevo, MeanWell_LRS_350
6
6.0
Jan 20, 2021
01/21
by
Keith Bennett (thisiskeithb)
data
eye 6
favorite 0
comment 0
This is a simple remix to use a Meanwell LRS-350-24 power supply in your [Tevo Tornado standalone mod](https://www.thingiverse.com/thing:2943052). Print two brackets & use 4 x M4x8mm screws & 4 x M4 washers to mount the PSU to the bracket. Use of longer screws can potentially damage your power supply.
Topics: 3D Printer Parts, Meanwell_lrs-350-24, MeanWell_LRS_350, power_supply, rics_3d, lrs-350,...
3
3.0
Mar 16, 2021
03/21
by
Derek Osborn (djos_1475)
data
eye 3
favorite 0
comment 0
Work In Progress - It's currently quite hard to insert and screw in M3 bolts... So my main goal is slim and mounts behind the left vertical rail out of the way - I also want to use an all-in-one fused-switched-IEC module as I think they look neater and fused is always a good idea imo. This is a remix from https://www.thingiverse.com/thing:2986488 I recommend using the top bracket from the original and just mirroring it in Cura before printing. The Fused-Switch IEC module I used is this one:...
Topics: MeanWell_LRS_350, thingiverse, anycubic_mega_zero, stl, 3D Printer Parts
1
1.0
Aug 22, 2021
08/21
by
Derek Osborn (djos_1475)
data
eye 1
favorite 0
comment 0
Anycubic Mega Zero v1.0 Horizontal Mount for Mean Well LRS-350 Power Supply. I recommend you print these in PETG or ABS+ due to the heat generated by the PSU. PLA is likely to warp and sag. There are 2 options for the plug socket, one is a rear mount (shown in photos) and the other is designed to mount behind the Z-Stepper motor in a vertical orientation. I've included an optional fanless silent cover for the PSU from here: https://www.thingiverse.com/thing:3882445
Topics: 3D Printer Accessories, anycubic_mega_zero, MeanWell_LRS_350, stl, thingiverse
2
2.0
Mar 25, 2021
03/21
by
J. F. (MacPro_de)
data
eye 2
favorite 0
comment 0
I replaced the power supply that came with my Geeetech A10 by a Mean Well power supply - the same power supply type used by my Creality Ender 3 Pro. I could use the bracket of the original power supply (all screw holes were at the same places) with the built-in power inlet and switch. The only problem was, that the original power supply was a full size version, but the Mean Well power supply is a slim version, so that a huge gap remained open which would have allowed access to the high voltage...
Topics: stl, MeanWell_LRS_350_24, thingiverse, Geeetech_A10, 3D Printer Parts
1
1.0
Dec 1, 2021
12/21
by
Tiemen de boer (tiemendeboer)
data
eye 1
favorite 0
comment 0
to fit under the ender 6
Topics: MeanWell_LRS_350_24, thingiverse, stl, 3D Printer Parts, ender 6
1
1.0
Jan 18, 2022
01/22
by
Greg Knapp (gknapp)
data
eye 1
favorite 0
comment 0
Noctua NF-A9-14 90mm fan cover for Meanwell PSU. Although intermittent, the stock fan on the Meanwell LRS 350W is loud when running. Switching it out for a 90mm noctua fan significantly reduced the fan noise. I've reduced the hex mesh from the original model at the top of the PSU so air is channelled through the components before being exhausted. The model has an internal hook for cable management. I ended up not using this on my own PSU. The fan should be mounted on the outside of PSU cover -...
Topics: noctua, thingiverse, PSU_Cover, MeanWell_LRS_350, stl, 3D Printer Parts
2
2.0
Mar 15, 2021
03/21
by
John Palmer (adzule)
data
eye 2
favorite 0
comment 0
This is a remix of gmarsh23's AC Inlet Cover adapted to use the 2 screw IEC from jhbruhns remix. https://www.thingiverse.com/thing:4446025. Also removed the tapering from the PSU screw holes to help improve strength and moved the ac inlet hole to the other side to allow more room for the IEC connections. Commented changes to hole position and taper removal to allow easy reversal.
Topics: MeanWell_LRS_350, thingiverse, PSU_Cover, MeanWell, stl, 3D Printer Parts
2
2.0
Mar 15, 2021
03/21
by
Remon Pel (rmpel)
data
eye 2
favorite 0
comment 0
The contacts on the Mean Well LRS-350 series PSU are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them. I tried to be inclusive; there is a 240v, 230v, 110v, "Danger!" and a blank protector. (The last one in case you want something else written on it) Insert the top site first, then click in the bottom side. DISCLAIMER I am not responsible for you...
Topics: mean_well, power_supply, MeanWell_LRS_350, PSU, thingiverse, power_supply_cover, PSU_Cover,...
5
5.0
Jan 20, 2021
01/21
by
Hans Raaf (OderWat)
data
eye 5
favorite 0
comment 0
This is a PSU modification which is meant for the Creality3D Ender 3, but may be used for other printers too. In the first step it replaces the original PSU with a Mean Well LRS-350-24. Then it replaces the original PSU cover fan with a specially designed partial case. This lets you use a 80 mm 12v Arctic F8 Silent fan (or any other 80 mm x 25 mm 12v fan) and reuses the original Ender 3 power socket / switch combination part. The original fan is also 12v indeed (see the photo). It is made from...
Topics: 3D Printer Parts, MeanWell_LRS_350, PSU_Cover, Ender_3, PSU_cover_switch, thingiverse,...
