5
5.0
May 1, 2021
05/21
by
(TheNoob0)
data
eye 5
favorite 0
comment 0
I wanted to use teaching techs webcam mount for octoprint so i made a base for the front left of the frame for the Mega Zero 1 and 2 note: I have included standard files that are universal but if you want a specific camera mount you will have to find it in https://www.thingiverse.com/thing:3223979 another note: The mega zero assembly was made by Calvin MegaZero and you can find it here: https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:51913#comment-5339637 Assembly and...
Topics: stl, Mega Zero 2.0, Mega Zero Octoprint, Mega Zero Mods, Anycubic, 3D Printer Accessories, Mega...
3
3.0
Jul 22, 2021
07/21
by
Sam Low (SamLow_jun)
data
eye 3
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: Anycubic, anycubic_mega_zero, Mega_Zero_20, stl, Parts, mega_zero, thingiverse
3
3.0
May 1, 2021
05/21
by
Francesco Maciariello (Macia)
data
eye 3
favorite 0
comment 0
e3d v6 mount for the Anycubic Mega Zero. Almost no supports required. Designed for a 50mm radial fan
Topics: stl, mega_zero_V1, e3d, anycubic_mega_zero, mega_zero, Mega_Zero_20, 3D Printer Accessories,...
4
4.0
May 1, 2021
05/21
by
Alexander Kanevskiy (lvader)
data
eye 4
favorite 0
comment 0
My re-thinking of https://www.thingiverse.com/thing:4567727, the heated bed spacers for Anycubic Mega Zero upgrade. There are 3 variants: 1. to use with 6mm outer diameter springs 1. to use with 8mm outer diameter springs 1. with silicone spacers.
Topics: stl, anycubic_mega_zero, mega_zero, 3D Printer Parts, thingiverse, Anycubic_mega_zero_v1
5
5.0
May 1, 2021
05/21
by
André Sowa (DrAlenFeinstone)
data
eye 5
favorite 0
comment 0
I have constant movement on the PTFE because the extruder is installed on top of the frame. So that this stops and is more stable, I designed a small cube that can be easily attached. I used cable ties ... 2.5 x 100 https://www.amazon.de/Fischer-Legrand-87488-Kabelbinder-schwarz/dp/B004SD306Q/ref=sr_1_2?__mk_de_DE=%C3%85M%C3% 85% C5% BD% C3% 95% C3% 91 & dchild = 1 & keywords = fischer + 87488 & qid = 1616450381 & sr = 8-2
Topics: stl, anycubic_mega_zero, mega_zero, thingiverse, 3D Printing
3
3.0
Sep 14, 2021
09/21
by
Tyler Haus (chiipo)
data
eye 3
favorite 0
comment 0
After searching for a little while, I couldn't find any storage solutions for use on a mega zero 2.0. So, I made a simple box that fits under the bed. **WHAT IS IT?** This is a simple box/tray to be put underneath the printer so that there is a place to put things (tools, flash drive, sd card, extra screws, etc.) to simply hold them. It has a slot on one end which allows for the separate "wall" piece to be added after printing. This allows it to be made without the use of any support...
Topics: stl, mega zero, mega zero 2 storage, thingiverse, 3D Printer Accessories, storage box, anycubic...
4
4.0
May 1, 2021
05/21
by
mouamar Tanash (mouamar)
data
eye 4
favorite 0
comment 0
handle for anycubic mega zero v1 or v2
Topics: stl, mega zero, 3d printer, Anycubic, anycubic_mega_zero_v2, anycubic_mega_zero, handle, 3D Printer...
3
3.0
Jan 6, 2021
01/21
by
Alexander Kanevskiy (lvader)
data
eye 3
favorite 0
comment 0
I wanted to install BTT's stepper motor smoothers to my printer and found out that there is not enough space in the box to fit them and securely fix. After some experiments I got idea to print the whole bottom part with holder for smoothers, but then better idea came: just rise the box so it can be mounted to upper hole/rails slot. This model is about that. Bottom part is used as-is, stock metal cover & fan. To fix smoothers I used model https://www.thingiverse.com/thing:3351822
Topics: stl, 3D Printer Parts, anycubic_mega_zero, mega_zero, thingiverse
5
5.0
May 1, 2021
05/21
by
Alexander Kanevskiy (lvader)
data
eye 5
favorite 0
comment 0
My re-design of the mount https://www.thingiverse.com/thing:4766416 I already had wires cover for PSU, just needed simpler mount brackets.
Topics: stl, anycubic_mega_zero, mega_zero, MeanWell_LRS_350, 3D Printer Parts, thingiverse,...
3
3.0
Jan 8, 2021
01/21
by
Shark UA (SharkUA)
data
eye 3
favorite 0
comment 0
holder for small diameter spools with 15mm hole
Topics: stl, anycubic_mega_zero, mega_zero, thingiverse, 3D Printer Accessories
3
3.0
Jul 3, 2021
07/21
by
Alexander Kanevskiy (lvader)
data
eye 3
favorite 0
comment 0
Copy of my Marlin builds from [GitHub](https://github.com/kad/Marlin/releases) for Anycubic Mega Zero V1 with BTT SKR E3 Turbo board. For flashing instructions and details, please check [Wiki](https://github.com/kad/Marlin/wiki) Other builds: - [Mega Zero v1 with stock board](https://www.thingiverse.com/thing:4676658) - [Mega Zero v1 with BTT SKR mini MZ or SKR mini E3 2.0 boards](https://www.thingiverse.com/thing:4890399) - [Mega Zero v1 with BTT SKR E3 Turbo...
Topics: Anycubic_mega_zero_v1, Marlin, marlin_firmware, anycubic_mega_zero, mega_zero, 3D Printer Parts,...
4
4.0
Jan 9, 2021
01/21
by
Marius Peters (Pizzapole)
data
eye 4
favorite 0
comment 0
Kasten für den Mega Zero oder andere Baugleiche 3D Drucker. Höhe 45,4 mm Abstand zur Oberkante von der Oberseite vom Steg 6,7mm Wandstärke 2,5 mm 20 % Infill
Topics: thingiverse, anycubic_mega_zero, stl, 3D Printer Accessories, Anycubic, mega_zero
3
3.0
Oct 15, 2021
10/21
by
calvin Roodenburg (Calvinpr)
data
eye 3
favorite 0
comment 0
This is a tool holder that holds the tools that come with the anycubic mega zero 2.0. plus a set of tweezers, usb stick and SD card. I used the adapter from the anycubic filament guide - https://www.thingiverse.com/thing:4608771/files top connect to the rail on the top of the printer I put an extra bracket on with a hole in it, and it holds well as is, or you could add a nut like this: https://www.thingiverse.com/thing:1061769 I printed this with PETG. 20 % infill, but it really doesn't matter...
Topics: thingiverse, stl, 3D Printer Accessories, mega_zero, 2.0, anycubic_mega_zero
3
3.0
May 1, 2021
05/21
by
(TheNoob0)
data
eye 3
favorite 0
comment 0
I just configured Klipper firmware for my MZ2 and i wanted to share my config files just to be helpful NOTE: rename the config file as printer.cfg for klipper to recognize it
Topics: stl, mega zero, thingiverse, mega zero 2.0, anycubic, 3D Printing, klipper
3
3.0
Oct 29, 2021
10/21
by
Tom Clesius (clesi-0)
data
eye 3
favorite 0
comment 0
*Introduction** The seen lcd knob is this one [here](https://www.thingiverse.com/thing:5021109). This is an electronics box extension for the [Anycubic Mega Zero](https://www.digitec.ch/de/s1/product/anycubic-mega-zero-3d-drucker-13573014). It has a big drawer and a plate to mount various types of MOSFETs (you just need to adjust the holes). In the future i have plans to design a shorter drawer and a slide-in for the Raspberry Pi....
Topics: thingiverse, anycubic_mega_zero, Anycubic_mega_zero_v1, stl, 3D Printing
4
4.0
Mar 16, 2021
03/21
by
(TheNoob0)
data
eye 4
favorite 0
comment 0
i have been using this raspberry pi case (https://www.thingiverse.com/thing:3719217) and i wanted to mount it on my mega zero so i remixed it in tinkercad to mount on the frame with the stock screws.
Topics: Mega Zero 2.0, thingiverse, PI case, Anycubic, Mega Zero, Rasberry_PI, stl, Mega Zero mod, 3D...
3
3.0
Jun 11, 2021
06/21
by
Scott Pettie (pcwizrd)
data
eye 3
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: anycubic_mega_zero_v2, 3D Printer Parts, stl, thingiverse, anycubic_mega_zero, BLTouch,...
4
4.0
Mar 16, 2021
03/21
by
Ulrik Duus (uwduus)
data
eye 4
favorite 0
comment 0
I wanted to have a Cabel chain on my printer and couldn't find a design for the connection on the motor so i made one. The chains fits from: https://www.thingiverse.com/thing:2104821
Topics: 3D Printing, thingiverse, Anycubic Mega Zero, mega zero, megazero, Anycubic, megazord, stl
3
3.0
Jul 3, 2021
07/21
by
Alexander Kanevskiy (lvader)
data
eye 3
favorite 0
comment 0
Copy of my Marlin builds from [GitHub](https://github.com/kad/Marlin/releases) for Anycubic Mega Zero V1 with BTT SKR mini MZ or SKR mini E3 V2.0 boards, For flashing instructions and details, please check [Wiki](https://github.com/kad/Marlin/wiki) Other builds: - [Mega Zero v1 with stock board](https://www.thingiverse.com/thing:4676658) - [Mega Zero v1 with BTT SKR mini MZ or SKR mini E3 2.0 boards](https://www.thingiverse.com/thing:4890399) - [Mega Zero v1 with BTT SKR E3 Turbo...
Topics: Anycubic_mega_zero_v1, Marlin, marlin_2, marlin_firmware, anycubic_mega_zero, mega_zero, 3D Printer...
3
3.0
May 1, 2021
05/21
by
pedro delaveina (plataoplomo)
data
eye 3
favorite 0
comment 0
attachement for mega zero or mega zero 2.0 place it in the 2 screws on the left of the x axis refer to thing 4421877 from stuartwaudby for the end g-code and the attachement to the fix parts on the printer base. You'll need to drill a +/- 5 mm in the 3mm holes i made (sry i'm bad but it's okay) and attach a cord and like you know...... btw i'm a newbie so dont criticize my bad model pls but upgrades are welcome even if i don't see the utility cuz my thing works well.
Topics: stl, mega zero, thingiverse, auto shutdown, 3D Printer Accessories, mega zero 2.0
6
6.0
Mar 19, 2021
03/21
by
Robert Dr.Taly (drtaly)
data
eye 6
favorite 0
comment 0
Original layer fanduct for Anycubic Mega Zero printer. here you have the stl and the gcode to print it in the Zero
Topics: anycubic_i3_mega_zero, fan, fanduct, mega zero, thingiverse, anycubic mega zero, Anycubic,...
4
4.0
Jan 9, 2021
01/21
by
Alexander (kaka-cubic)
data
eye 4
favorite 0
comment 0
X-axis belt cover for Anycubic Mega Zero.
Topics: cover, thingiverse, anycubic_mega_zero, stl, 3D Printer Accessories, mega_zero, x_axis
4
4.0
Mar 16, 2021
03/21
by
mouamar Tanash (mouamar)
data
eye 4
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: lcd_display, lcd_case, thingiverse, mega zero, BIGTREETECH_TFT35, anycubic_mega_zero, Anycubic,...
3
3.0
Jun 10, 2021
06/21
by
M Smolders (marsmol)
data
eye 3
favorite 0
comment 0
The stock hot end fan on the Mega Zero is notoriously loud. Except it isn't. When I had it running outside of the cover recently, it hardly made a sound. As [TTalkington](https://www.thingiverse.com/TTalkington) so succinctly remarks in his comment on [Mighty Nozzle](https://www.thingiverse.com/mightynozzle)'s [Customizable Fan Grill Cover](https://www.thingiverse.com/thing:2802474), the wrong fan guard can make a hot end fan sound like a professional leaf blower. The stock Mega Zero fan guard...
Topics: anycubic_mega_zero_v2, 3D Printer Parts, 40x40_fan_guard, stl, thingiverse, anycubic_mega_zero,...
3
3.0
May 1, 2021
05/21
by
Peter Denyer (pjdenyer)
data
eye 3
favorite 0
comment 0
Corner brackets to align a 220mm glass build plate on the 235mm bed of an Anycubic Mega Zero. The corner pieces are attached using 5mm thread diameter self tapping plastic screws which clamp to the bottom of the bed. I recommend aligning upright with the closed corner at the bottom for strength. I printed in PLA so I didn't rely on these to hold the plate in place but they do ensure that it is correctly centred as you attach clips (I found that due to a slightly warped bed, the reason for...
Topics: stl, Anycubic Mega Zero, Glass Bed, 3D Printer Accessories, Build plate, thingiverse, Mega Zero
4
4.0
May 1, 2021
05/21
by
mouamar Tanash (mouamar)
data
eye 4
favorite 0
comment 0
anycubic mega zero V1/V2 stock direct drive bracket for Clone E3D hotend, adjustable BL touch mount and all new back plate bracket mount. its still untested at this moment, once i print it and try it ill do an update
Topics: stl, anycubic mega zero, direct_drive_extruder, E3d, mega zero V1, 3D Printer Extruders, Anycubic,...
3
3.0
Apr 1, 2021
04/21
by
PS Tan (qystan)
data
eye 3
favorite 0
comment 0
Credit for this inspiration goes to Derokero, https://www.thingiverse.com/thing:4111545 This is implemented on an AnyCubic Mega Zero printer using the supplied 2.4mm Allen-key on a SKR 1.4 Turbo board. Microswitch is wired to the servo probe port. It should work on the stock controller board but you will need the configuration to get the required memory space. Deviation test gave 0.001739. Not too shabby for a 20c microswitch. Marlin Configuration.h settings: #DEFINE AUTO_BED_LEVELING_BILINEAR...
Topics: allenkey, thingiverse, Anycubic, Probe, 3D Printer Accessories, bed_leveling, mega_zero,...
3
3.0
Jun 10, 2021
06/21
by
Martin Kayser (tebarius)
data
eye 3
favorite 0
comment 0
Just a Box for most used tools for Anycubic - Mega Zero 2.0 created with tinkercad: https://www.tinkercad.com/things/8psdhrmnQYN No support needed. I printed it with a layerhight of 0.3 mm
Topics: Anycubic, box, Toolbox, anycubic_mega_zero_v2, thingiverse, Mega_Zero_20, 3D Printer Accessories,...
3
3.0
Jul 3, 2021
07/21
by
Alexander Kanevskiy (lvader)
data
eye 3
favorite 0
comment 0
Copy of my Marlin builds from [GitHub](https://github.com/kad/Marlin/releases) for Anycubic Mega Zero 2.0 with stock board. For flashing instructions and details, please check [Wiki](https://github.com/kad/Marlin/wiki) Other builds: - [Mega Zero v1 with stock board](https://www.thingiverse.com/thing:4676658) - [Mega Zero v1 with BTT SKR mini MZ or SKR mini E3 2.0 boards](https://www.thingiverse.com/thing:4890399) - [Mega Zero v1 with BTT SKR E3 Turbo...
Topics: anycubic_mega_zero_v2, Mega_Zero_20, Marlin, marlin_firmware, 3D Printer Parts, thingiverse, stl
3
3.0
Jul 3, 2021
07/21
by
Alexander Kanevskiy (lvader)
data
eye 3
favorite 0
comment 0
Copy of my Marlin builds from [GitHub](https://github.com/kad/Marlin/releases) for Anycubic Mega Zero 2.0 with BTT SKR E3 Turbo boards. For flashing instructions and details, please check [Wiki](https://github.com/kad/Marlin/wiki) Other builds: - [Mega Zero v1 with stock board](https://www.thingiverse.com/thing:4676658) - [Mega Zero v1 with BTT SKR mini MZ or SKR mini E3 2.0 boards](https://www.thingiverse.com/thing:4890399) - [Mega Zero v1 with BTT SKR E3 Turbo...
Topics: anycubic_mega_zero_v2, Mega_Zero_20, Marlin, marlin_firmware, 3D Printer Parts, thingiverse, stl
3
3.0
Jul 3, 2021
07/21
by
Alexander Kanevskiy (lvader)
data
eye 3
favorite 0
comment 0
Copy of my Marlin builds from [GitHub](https://github.com/kad/Marlin/releases) for Anycubic Mega Zero 2.0 with BTT SKR mini MZ or SKR mini E3 V2.0 boards, For flashing instructions and details, please check [Wiki](https://github.com/kad/Marlin/wiki) Other builds: - [Mega Zero v1 with stock board](https://www.thingiverse.com/thing:4676658) - [Mega Zero v1 with BTT SKR mini MZ or SKR mini E3 2.0 boards](https://www.thingiverse.com/thing:4890399) - [Mega Zero v1 with BTT SKR E3 Turbo...
Topics: anycubic_mega_zero_v2, Mega_Zero_20, Marlin, marlin_firmware, 3D Printer Parts, thingiverse, stl
3
3.0
Jan 4, 2021
01/21
by
Florian Beisel (paceypedia)
data
eye 3
favorite 0
comment 0
This is a mounting plate for an optical filament sensor with a dovetail housing like: https://www.thingiverse.com/thing:3106976 Just slide it over the Z-Rod, replace the four screws holding the threaded sleeve in place and slide a filament sensor in.
Topics: 3D Printing, Optical_Sensor, stl, Filament_Sensor, Anycubic, anycubic_mega_zero, Filament_runout,...
2
2.0
Nov 30, 2021
11/21
by
Julian van der Heide (julianvdh)
data
eye 2
favorite 0
comment 0
I couldn't find a Raspberry Pi Cam mount for the Mega Zero / Mega Zero 2.0 that matched exactly what I wanted, so I designed it myself. You can attach the arm to the motor of the X Axis. For this you only have to remove 2 of the screws, and with these screws you secure the arm (see image) There is no Pi Cam housing included with the files. I used the housing that BartPLA made. https://www.thingiverse.com/thing:3868687
Topics: pi cam arm, anycubic mega zero v2, mega zero 2.0, anycubic mega zero, thingiverse, 3D Printer...
2
2.0
May 1, 2021
05/21
by
Derek Osborn (djos_1475)
data
eye 2
favorite 0
comment 0
Ladies and Gents, This is my Dual Z Screw upgrade for the Mega Zero v1.0 . UPDATED : 29th March 2021 Installation process for the second Z-screw: 1/ Move the Z gantry up to about 180mm on the Z-axis 2/ Install the 2nd Z-Stepper motor - then attach the coupling to the stepper shaft and tighten it - leave a couple of mm between the top of the shaft and the landing for the Z-screw so they don't touch 3/ Install the z-screw into the coupling and tighten it 4/ install the screws mounting the z-screw...
Topics: stl, thingiverse, anycubic_mega_zero, 3D Printers
3
3.0
Apr 8, 2021
04/21
by
jonni Pagani (jonnijp)
data
eye 3
favorite 0
comment 0
this is the fan mount i've designed for fit a 50mm centrifugal fan on my mega zero,download the orignal fan duct on thingiverse
Topics: anycubic mega zero, 3D Printer Parts, stl, duct, mega zero, Anycubic, thingiverse, fan, fan_duct,...
4
4.0
Mar 15, 2021
03/21
by
(foureight84)
data
eye 4
favorite 0
comment 0
Remix of https://www.thingiverse.com/thing:4619622. It's the same dimensions except it has been mirrored and mounting bracket thickness reduced for wheel spacing. The original seems to have issues sitting flushed against the wheels on the Mega Zero and preventing them from spinning. There is also a motor mount spacer for the extruder side if you swap your stock Z motor and end up using an Ender 3 aluminum motor mount. For the other side that uses this Z bracket, make sure to use motor mounts...
Topics: thingiverse, DIY, anycubic_mega_zero, Anycubic, stl
2
2.0
May 1, 2021
05/21
by
Derek Osborn (djos_1475)
data
eye 2
favorite 0
comment 0
Ladies and Gents, This is my Heated Bed Upgrade Guide for the Mega Zero v1.0 ! This is in 2 parts, one for the SKR Mini MZ (the easy version) and the Advanced version for the Stock Melzi Board. UPDATED: I've now included a compatible "PEI Spring Steel Build Plate" option. PS, I highly recommend you install a Browser extension like "Imagus" (for Firefox) as this lets you see the Images by hovering your Mouse pointer over them. Prerequisites for both Board Types: 1/ A Proper...
Topics: stl, thingiverse, anycubic_mega_zero, 3D Printers
4
4.0
Jan 5, 2021
01/21
by
Calvin MegaZero (Calvin_MegaZero)
data
eye 4
favorite 0
comment 0
Hi, So this is my take on a Fan & Blower holder for the Anycubic Mega Zero. It is (heavily) based on this design: https://www.thingiverse.com/thing:4588250, but I do not like how high and large the construction is. There are also some holes in the airducts that leak air, so I decided to redesign it and (hopefully) improve the airflow and size. The outlets are also pointed downwards towards the print and not the nozzle so the printed part is cooled better. It uses the stock Fan and Blower,...
Topics: 3D Printers, anycubic_mega_zero, stl, thingiverse
2
2.0
Oct 29, 2021
10/21
by
Tom Clesius (clesi-0)
data
eye 2
favorite 0
comment 0
*A simple rotary encoder knob, with a "prusia like" mounting clamp.* **Note:** *Fit only tested on Mega Zero V1* --------------------------------------------------------------------------------------------------------------------------- Im open for requests and comments, much fun printing :-)
Topics: stl, thingiverse, anycubic_mega_zero, 3D Printing
2
2.0
Dec 1, 2021
12/21
by
Richard Seifert (Zmad2000)
data
eye 2
favorite 0
comment 0
I created this since I was having bad printing results with the original. I add more material to the lower mounting hole.
Topics: thingiverse, blokhead, stl, 3D Printer Parts, mega zero
4
4.0
Jul 22, 2021
07/21
by
Calvin MegaZero (Calvin_MegaZero)
data
eye 4
favorite 0
comment 0
The Frankensteiner adjusted for two 4010 fans for part cooling. The BLTouch mount is separated to fit the second 4010 fan. Note that it is designed for the MZ1.0 == Backstory User Misterolik requested a remix of the Frankenstein (https://www.thingiverse.com/thing:4709536) for dual fans and also maintaining the BLTouch mount, see MZ grou post here: https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:52729
Topics: anycubic_mega_zero, 3D Printer Parts, thingiverse, stl
4
4.0
Jan 9, 2021
01/21
by
Calvin MegaZero (Calvin_MegaZero)
data
eye 4
favorite 0
comment 0
This is a Frankenstein combination of Fan duct: https://www.thingiverse.com/thing:4620462 & Hood: https://www.thingiverse.com/thing:4627041 & BLTouch mount: https://www.thingiverse.com/thing:4646159 (Thanks to Ivader) For the story of the creation of this monstrosity please check these links: https://www.reddit.com/r/AnycubicMegaZero/comments/km6m1x/hood_part_cooler_bl_touch_frankenstein/?sort=new...
Topics: 3D Printer Parts, thingiverse, anycubic_mega_zero, stl
3
3.0
May 1, 2021
05/21
by
Derek Osborn (djos_1475)
data
eye 3
favorite 0
comment 0
Anycubic Mega Zero Stepper Motor Mount for Flexible Z Couplers. this works perfectly with the original stepper and a 2nd stepper motor. You can even use the stock mounting holes for the 1st stepper motor. For these to provide the needed clearance for high-quality Flexible Z Couplers, you will need to use round-head M4 screws with the smallest head possible to clear the Couplers. Compatible with the following 2nd Z-axis lead screw mount: https://www.thingiverse.com/thing:4795281 Required Screws:...
Topics: stl, thingiverse, anycubic_mega_zero, 3D Printer Parts
3
3.0
May 1, 2021
05/21
by
mouamar Tanash (mouamar)
data
eye 3
favorite 0
comment 0
BTT TFT24 for Anycubic mega zero V1 not sure if the mount will fit anycubic mega zero v2 but feel free to try it out and let us know
Topics: stl, LCD_Mount, Anycubic mega zero V1, TFT24, bigtreetech_tft24, Anycubic mega zero, 3D Printer...
3
3.0
Jan 7, 2021
01/21
by
Calvin MegaZero (Calvin_MegaZero)
data
eye 3
favorite 0
comment 0
A casing (bottom part) for the control box of the Anycubic Mega Zero for a 8025 fan and 3 TL Smoothers and a drawer for the tools (allen keys and wrenches) and spare room for nozzles etc. It makes use of the stock screws to fixate the casing to the top part of the control box. All you need are the screws for the fan and the TL smoothers. I used a good, silent and cheap (
Topics: 3D Printer Parts, anycubic_mega_zero, stl, thingiverse
2
2.0
Aug 8, 2021
08/21
by
Calvin MegaZero (Calvin_MegaZero)
data
eye 2
favorite 0
comment 0
After making the adjusted version of the Gantry adapters for the Anycubic Mega Zero (https://www.thingiverse.com/thing:4743749), I had an idea for a different mounting method that make it easier and faster to remove the Base part from the Gantry. @mediaman thought it was a cool design idea and suggested me to post it as a remix. I've made a bolt connection that is accessible from the top and it makes it possible to remove the Base part whilst the Gantry adapter is still attached to the gantry...
Topics: 3D Printer Parts, stl, thingiverse, anycubic_mega_zero
2
2.0
Oct 29, 2021
10/21
by
Tom Clesius (clesi-0)
data
eye 2
favorite 0
comment 0
This is just a simple knob. Fit was tested on an [Anycubic Mega Zero](https://www.digitec.ch/de/s1/product/anycubic-mega-zero-3d-drucker-13573014).
Topics: thingiverse, anycubic_mega_zero, stl, knob, 3D Printing
3
3.0
Jun 10, 2021
06/21
by
Timo Gimmi (Ti_Gi)
data
eye 3
favorite 0
comment 0
Remix of the Camera holder for a C270 Webcam on the x-axis servo. Please remember to mirror the build so that it will work.
Topics: thingiverse, anycubic_mega_zero, 3D Printer Accessories, stl
4
4.0
May 1, 2021
05/21
by
Christof Lauriers (krikkelions21)
data
eye 4
favorite 0
comment 0
This part is a remix of https://www.thingiverse.com/thing:4752980. I modified the front V-Slot cover to print it in one piece instead of 2 pieces. Also the length is modified to fit the Mega Zero 2.0 better and added a sloped part that fits nicely into the V-Slot of the Z aluminum profile. The part needs to be printed diagonally on the bed because the length exceeds the width of the bed. I've also used a brim because the ends have a tendency to curl up.
Topics: stl, thingiverse, anycubic_mega_zero, 3D Printer Accessories
7
7.0
Jan 16, 2021
01/21
by
Derek Osborn (djos_1475)
data
eye 7
favorite 0
comment 0
*** Under Construction - A couple of fixes are needed so this actually fits correctly *** Anycubic Mega Zero - Enhanced Dual blower for stock fans This version has wider spacing (23mm vs 15mm) between the blower nozzles and the heat-block. I found Rev06 left side-blower nozzle was touching the heat block and melting. It also has a stronger left side mounting point. I cheated like crazy and used the below all singing, all dancing design and chopped out all the extra bits in Fusion 3D....
Topics: 3D Printer Parts, anycubic_mega_zero, stl, thingiverse
