35
35
movies
eye 35
favorite 0
comment 0
1
Topic: Mobula hypostoma
2
2.0
Apr 19, 2022
04/22
by
Master Chief (LorenzDesings)
data
eye 2
favorite 0
comment 0
I printed this with TPU.
Topics: thingiverse, drone, stl, Other, Mobula6, mobula, Mobula_6
4
4.0
May 1, 2021
05/21
by
Chris vK (chrisvk)
data
eye 4
favorite 0
comment 0
I liked the original design a lot, but I prefered to have a case where I can put all my things in... So I created that remix. It will have enough space to fit a small BetaFPV Lipo Checker... of course you can use it for sth. else too, more Lipos for example. Have fun and stay safe!
Topics: stl, mobula 6 case, mobula6, mobula 6, mobula, fpv, thingiverse, case, R/C Vehicles
3
3.0
May 1, 2021
05/21
by
Rúben Pereira (Nebur96)
data
eye 3
favorite 0
comment 0
Mobula 6 HD tray for original box. This allows you to store and organize your Mobula inside your box. If my work helped you and it was useful in some way, you can always buy me a coffee:
Topics: stl, mobula, R/C Vehicles, Mobula6, thingiverse, Mobula_6
3
3.0
Jan 6, 2021
01/21
by
Achim Ziermann (GuiliFPV)
data
eye 3
favorite 0
comment 0
Hi, recently I found this at Amazon (https://www.amazon.de/gp/product/B08DJ4P5JT/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1) A 350mAh 1s Lipo, ideal to squeeze even more flighttime out of the Mobula. The Lipo weights only 0,5gramm more than average 300mAh Lipos. Challenge was, to mount it properly, because of the lipo dimesion it is not holding inside the Mobula 6 Frame. So I converted my 450mAh clip somewhat, now the 350 1s lipo holds perfect into the frame. I will make a photo later...
Topics: R/C Vehicles, stl, battery_holder, mobula, thingiverse, Mobula_6, Mobula6
6
6.0
Mar 17, 2021
03/21
by
Sooth Sayer (ssayer)
data
eye 6
favorite 0
comment 0
The M7 is made to work 1S or 2S, but I can't see me running it 1S, since all I have to do on 2S inside is to limit throttle a little in my xmtr and I still get the power of 2S. With that in mind, I drew up a battery bay that would hold both large (450mAh and 550mAh) batteries along with the 260mAh stock batteries, including 300mAh batteries. Here's what I came up with for my 2S setups. I have them orientated to give them the greatest strength when 3D Printed. No supports needed. I was already...
Topics: Mobula_7, Battery, stl, Mobula7, thingiverse, R/C Vehicles, Mobula
2
2.0
Dec 1, 2021
12/21
by
(vomestein)
data
eye 2
favorite 0
comment 0
I designed this holder to use 450mAh batteries on a standard frame, without modifying.
Topics: Mobula_6, mobula, Mobula6, thingiverse, battery_holder, stl, R/C Vehicles
4
4.0
Mar 22, 2021
03/21
by
Carlos Garcia (cgpena)
data
eye 4
favorite 0
comment 0
A custom canopy for the Mobula7 tiny whoop. The main purpose was to give the mobula a lower profile, but later I added a dome to protect the vtx antenna and prevent it from getting tangled in the grass or trees. Print without support a 100% infill. I have crashed many times and it is still in one piece.
Topics: fpv, Tinywhoop, stl, mobula, Mobula_7, whoop, tiny, thingiverse, R/C Vehicles, Mobula7
2
2.0
Apr 19, 2022
04/22
by
Master Chief (LorenzDesings)
data
eye 2
favorite 0
comment 0
I printed this with TPU.
Topics: thingiverse, drone, stl, Other, Mobula6, mobula
3
3.0
Jun 10, 2021
06/21
by
(PROPWURX)
data
eye 3
favorite 0
comment 0
Use these stand offs when using the Trashcan frame with the Mobula7 to create The Mobster! This turns the normal Mobula7 into a total pocket rocket making it feel way bigger that a simple Whoop on steroids!. More info to follow and video upload coming soon to the channel: https://www.youtube.com/channel/UCzsB68JfYchn0PSZWuPoYpw/videos?view=0
Topics: mobula, thingiverse, Mobula7, 3D Printing, stl
4
4.0
Apr 2, 2021
04/21
by
Jay Kay (JayKayFPV)
data
eye 4
favorite 0
comment 0
A cover for your Mobula 7 charger. Attaches using the 4 original screws on the charger. Please be careful when charging at 600mah as alot of heat is produced.
Topics: Eachine, Mobula_7, charger, thingiverse, mobula 7 charger, R/C Vehicles, Mobula7_HD, Mobula7, stl
4
4.0
Mar 9, 2021
03/21
by
James Evans (Jero1987)
data
eye 4
favorite 0
comment 0
This is a 2S battery holder for the Mobula 7/ Eachine Trashcan carbon fiber frame from microheli. https://www.microheli.com/carbon-fiber-frame-without-ducted-mobula7.html You should be able to re-use the screws that come with the frame. Just get the holes started with a tiny screwdriver.
Topics: eachine trashcan, mobula, R/C Vehicles, mobula 7, stl, thingiverse, 2S Battery, battery holder,...
4
4.0
Mar 31, 2021
03/21
by
Tyler Durden (tdurd3n)
data
eye 4
favorite 0
comment 0
Update - Frame printed fine but the motor holes are orentated incorrectly, will be modifying and uploading v2 shortly.. This is a mashup of a modified mobula toothpick bottom plate and a modified tinyhawk freestyle top plate. I added mounting holes for the Emax AIO board and standoffs to the bottom plate to accomodate the re-worked tinyhawk top plate. Included 15mm standoffs like the tinyhawk uses. In theory this should allow me to take the tinyhawk guts and use them in this frame. Printing now...
Topics: TinyHawk, tinyhawk_freestyle, thingiverse, Hobby, mobula, stl
3
3.0
Jun 12, 2021
06/21
by
francis del rosario (okix01)
data
eye 3
favorite 0
comment 0
mobula6 lite Print Settings: 4 to 5 Walls 2 Top 2 Bottom 100 % infill need to drill or to poke a hole for the screw Enjoy !
Topics: mob6 lite, mobula, mob7, Mobula6, thingiverse, Mobula7, mob6, 3D Printing, Mobula_7, happymodel,...
4
4.0
Mar 5, 2021
03/21
by
andre botha (Sakkie)
data
eye 4
favorite 0
comment 0
After seeing a lot of posts that the cables are getting caught in the props, especially the ribbon cable. I thought of this. Hope it works for you as well as it does for me. Print in TPU.
Topics: stl, Hobby, HDwhoop, Mobula7, whoop, MobulaHD, mobula, thingiverse
7
7.0
Mar 17, 2021
03/21
by
Nils Jae (thelili)
data
eye 7
favorite 0
comment 0
Printed it in PLA and ABS 0.2 two Batteries fits in very tight and good
Topics: gnb, fpv, happymodel, stl, mobula, Mobula7, thingiverse, Hobby
8
8.0
Apr 20, 2021
04/21
by
Nicolas DOS SANTOS (Afterhender)
data
eye 8
favorite 0
comment 0
MOBULA7 frame first attempt, lets see if it works.
Topics: thingiverse, stl, R/C Vehicles, Mobula7, frame, mobula
3
3.0
Jun 11, 2021
06/21
by
jose cont (yotta72)
data
eye 3
favorite 0
comment 0
Transport box for the Mobula 6 (also HD version), hole for the Uruav U1 charger, propellers (under the drone) and a hole for lipos, cables, etc.
Topics: mobula6hd, case, box, Other, Mobula6, thingiverse, Mobula 6 HD, Protection, Tinywhoop, Mobula_6,...
7
7.0
Mar 17, 2021
03/21
by
Alex Enderle (Ambifox)
data
eye 7
favorite 0
comment 0
Hello everybody! I designed a storage Box for the Mobula 7. You need to Push little Magnets in all of the Parts. The Magnet dimensions are: Ø4mmx2mm you need 32 of them. If you like the design let me know=)
Topics: Magnet, R/C Vehicles, Mobula 7, box, stl, magnetic, mobula, Mobula7, thingiverse, storage, Mobula7...
7
7.0
Mar 17, 2021
03/21
by
Ccc Kkk (hehehaha8)
data
eye 7
favorite 0
comment 0
This Mobula7 battery holder supports both Nano-Tech 1s 600mah and 2s 260mah battery. * This fits between the 2 battery holder bars in the frame; please slide the larger side in first follow by pushing the smaller side in * 2 battery sizes in one holder by changing the orientation of battery placement Additional notes: * Please add support material as illustrated (from build platform only). * TPU material only * There is also a lighter version for those who need 2s LiPo support only. You will...
Topics: R/C Vehicles, Mobula_7, LIPO_Holder, happymodel, stl, LiPo_Battery, mobula, 1S_LIPO, thingiverse,...
5
5.0
Mar 5, 2021
03/21
by
(Thump2010)
data
eye 5
favorite 0
comment 0
Upon request I made a 2s lipo holder to fit the version 1 and 2 Mobula7 frame as they come designed for 1s batteries. Designed to be printed out of TPU. I printed at 0.15mm layer height, don't need support (looks like it does but prints fine without it) and infill doesn't matter. To use cut away the built in 1s battery holder cutting it flush then snap in the holder.
Topics: 2s_lipo, tiny_whoop, stl, R/C Vehicles, Tinywhoop, 75mm, Mobula_7, Mobula7, whoop, 2s whoop,...
4
4.0
May 1, 2021
05/21
by
jon blackham (Voyajer)
data
eye 4
favorite 0
comment 0
Two piece shell for the usb Li-Hv lipo charger that comes with the Happymodel Mobula6. It has holes for the charging status lights (center for Li-Hv, end for normal Lipo batteries). This model requires gluing on the chamfered edges and optionally recommends a dab of glue on the underside of the PCB. You may need to clip the pins on the connectors if they protrude further than 1 mm from the bottom of the PCB.
Topics: stl, 1S_LiHV, lihv, drone, charger, mobula, Quadcopter, R/C Vehicles, happymodel_mobula6,...
19
19
Oct 15, 2018
10/18
by
https://www.flickr.com/photos/guitarfish/
movies
eye 19
favorite 0
comment 0
A wonderful dive at El Bajon, El Hierro, Barracuda, jacks, snapper and a pair of Mobula Rays cruising overhead. Source: https://www.flickr.com/photos/66243365@N00/20747193322 Uploader: https://www.flickr.com/photos/guitarfish/
Topics: Flickr, video, diving, elhierro, canaryislands, wildlife, mobula, ray
4
4.0
Mar 9, 2021
03/21
by
mark sullivan (marksull)
data
eye 4
favorite 0
comment 0
Snap on prop guard for the AirBlade Super75 X Carbon Fiber Frame Kit. Easy to replace if you happen to break one.
Topics: Mobula_7, R/C Vehicles, stl, thingiverse, Quadcopter, whoop
5
5.0
Mar 5, 2021
03/21
by
Ahmad Albab (irg33k)
data
eye 5
favorite 0
comment 0
Hardware; V1 Motor : HappyModel 0802-19000kv. Prop : KingKong 65mm. FC : Crazybee F3. VTX : HappyModel Whoop VTX 5.8g 40ch 25mW~200mW. RX : TBS Crossfire Nano. Battery : 2 X GNB 300mAh 1s Frame : Toothpick MK2.0 (PETG) V2 Motor : HappyModel 1102-10000kv. Prop : KingKong 65mm. FC : Crazybee F4 Pro V2.0. VTX : HappyModel Whoop VTX 5.8g 40ch 25mW~200mW. RX : TBS Crossfire Nano. Battery : 1 X TBS Graphene 2s. Frame : Toothpick MK2.3 (Carbon Fiber) I'm using M2 x 25 screws for the FC/VTX mounting....
Topics: caddx_eos2, Caddx_Turbo_EOS2, stl, R/C Vehicles, kabab_fpv, caddx_mount, CADDX, kabab, Mobula_7,...
5
5.0
Mar 4, 2021
03/21
by
spencer owen (spudinator)
data
eye 5
favorite 0
comment 0
A case for 75mm tiny whoops like the mobula 7.
Topics: mobula, beta75x, Robotics, BetaFPV_75x, Tinywhoop, thingiverse, stl, Mobula7
7
7.0
Apr 20, 2021
04/21
by
P D (chixxi)
data
eye 7
favorite 0
comment 0
Spacers for Happymodel Mobula7 FPV drone. In the model I got, it seems like the flight controller can move up and down way to far (up to 3mm). If it moves up or is pushed up (i.e. when plugging in USB), the FC then touches the camera-boards. I therefore made these simple and quick and dirty spacers to keep the FC down. See pictures for more details, the spacers are red. V1 Inner diameter: 3mm Outer diameter: 5mm Height: 3mm V2 Inner diameter: 2.5mm Outer diameter: 4.5mm Height: 3mm Print 3...
Topics: thingiverse, stl, R/C Vehicles, Mobula7, fpv, mobula, happymodel
4
4.0
Mar 22, 2021
03/21
by
Yaroslav Oliinyk (zorro777)
data
eye 4
favorite 0
comment 0
battery holder 3s 300mah uruav for mobula 7 hd
Topics: Mobula7_HD, stl, Mobula_7, R/C Vehicles, thingiverse
3
3.0
Apr 1, 2021
04/21
by
Nicolas DOS SANTOS (Afterhender)
data
eye 3
favorite 0
comment 0
Support batterie pour le chassis PicklePick Imprimé en TPU ça fit super bien.
Topics: 3D Printing, thingiverse, picklepik, Mobula7, battery, mobula, picklepick, holder, stl
3
3.0
Apr 5, 2021
04/21
by
Leif Nilsson (3dxspin)
data
eye 3
favorite 0
comment 0
A simple and portable Tiny Whoop stand. Designed especially for Mobula 6 but will also fit whoops with the same type of frame. Allows easy and accurate calibration. Note: May not fit "meteor" type of frames. Short demo:https://www.youtube.com/watch?v=qz6ifHB-xWU
Topics: thingiverse, Tiny Whoop, Mobula 6, UR65, stl, URUAV, DIY, UK65, US65
3
3.0
Jan 7, 2021
01/21
by
Null Hypothesis (Null_Hypothesis)
data
eye 3
favorite 0
comment 0
Small case for the mobula6 HD so you can safely transport it in your coat pocket. One of the boxes stores a few lipos and has an optional lid.
Topics: 3D Printing, stl, Mobula6, Tinywhoop, tiny_whoop, thingiverse, Mobula_6, mobula6hd
5
5.0
Apr 20, 2021
04/21
by
Henry Chung (pathfinderzero)
data
eye 5
favorite 0
comment 0
Mobula 7 2S Lipo battery clip. This is a remix of https://www.thingiverse.com/thing:3230910. Changes: 1) Able to print without using support. 2) Tighter fit 3) Removed some weight It fits Betafpv 2S 350mah XT30 as well as GNB 2S HV 300mah with XT30 connector. 12/28/2018 - added a lighter (1.0g) version. Print using 0.3mm layer height 60% triangle infill. 12/30/2018 - added a version for GNB 2S 450mah.
Topics: thingiverse, stl, battery mount, Mobula7, R/C Vehicles, mobula, battery clip
6
6.0
Apr 20, 2021
04/21
by
Derek B. (Airmaxx23)
data
eye 6
favorite 0
comment 0
This a modified version of the Spiked Beta75x canopy, found here (https://www.thingiverse.com/thing:3275140), for the Eachine Trashcan and Beta85X. It will work with any whoop style frame when using the Caddx EOS2 camera. I added a front mounting tab and the ability to mount the Caddx EOS2 camera directly to the canopy without additional mounts or hardware. Any camera that is 14mm wide should work as well. This is designed to be printed in TPU.
Topics: thingiverse, caddx, beta85x, eos, Trashcan, eachine, betfpv, mobula 7, mobula, eos2, stl, beta65x,...
4
4.0
Jun 7, 2021
06/21
by
(snowy50)
data
eye 4
favorite 0
comment 0
i combined both of the files to make a pretty nice looking canopy for stock camera on the mobula. RECOMMENDED print in tpu. you can use the stock screws too any problems or questions please comment,thanks :)
Topics: mobula, drone, thingiverse, stl, TPU, R/C Vehicles, Canopy, tiny_whoop
4
4.0
Jan 7, 2021
01/21
by
Chris Ing (Designatorus)
data
eye 4
favorite 0
comment 0
My next Version of a Mobula 7 Frame the full printed Version makes sometimes trouble by higher motor temp, then the small pla parts start to melt, then the propellers get contact to the duct and its done Now i mill the main Sheet and print only the Prop Guard Total weight like at the picture with Glass Fibre 1,5mm Sheet is only 30g (without Electronic) I like the Mobula7 but i dont like the space inside and its original Batteries Mount This is my Version of a better Frame Its clean with easy...
Topics: R/C Vehicles, stl, Quadcopter, micro_quadcopter, mobula, tiny_whoop, thingiverse
5
5.0
Apr 23, 2021
04/21
by
John Brisbois (teckn0)
data
eye 5
favorite 0
comment 0
Mount for Runcam Nano 3 with Mobula 6 flight controller. Slide the camera in and mount with one screw. 25 degree camera angle.
Topics: mobula, fpv, canopy, Mobula6, runcam, runcam_nano_3, runcam_nano, stl, tiny_whoop, nano, camera,...
4
4.0
Jan 6, 2021
01/21
by
Manus Coertzen (Xeromool)
data
eye 4
favorite 0
comment 0
So everyone knows about the jello caused by the stock Mobula 6 Canopy but I like how light it is. This was my attempt to fix the issue with minimal effort and it seems to have been a great success. The Support Clip snaps in place on the canopy and does not require any glue. I tested it for 2 weeks and after a few hard crashes the clip still holds up and in the event that you break it, the print time is only 2 minutes. ;)
Topics: R/C Vehicles, stl, Tinywhoop, tiny_whoop, thingiverse, Mobula_6, Mobula6
6
6.0
Mar 16, 2021
03/21
by
Jindrich Solar (Gophy)
data
eye 6
favorite 0
comment 0
NEW UPDATED VERSION HERE : https://www.thingiverse.com/thing:3846646 - Improved few things - Better motor mounts - Added hooks fro rubber band to hold battery - Made for CrazyBee AIO FC - Fits up to 2.5" (65mm) props - Motor mounts for 0703 (I am using HappyModel KV19000) - Printed out of PLA with 0.2mm layer and it works great ! - (On the pictures is still V1) - DVR https://www.youtube.com/watch?v=A7QPbN446RA - Other things all same as this one https://www.thingiverse.com/thing:3042913
Topics: griff, snapper, tinywhoop, bruhsless, 3D Printing, gr1ff, stl, mobula, thingiverse, micro, frame
3
3.0
Mar 25, 2021
03/21
by
Denis Duhovny (dDuhovny)
data
eye 3
favorite 0
comment 0
This is the mount between the main board and the camera board.
Topics: stl, R/C Vehicles, Mobula_7, whoop, thingiverse, Mobula7_HD, tiny_whoop
3
3.0
Jun 10, 2021
06/21
by
Mike Burke (Apollyon1980)
data
eye 3
favorite 0
comment 0
I had issues with my moblite7 camera changing angles mid flight (crash) so I bought the mobula6 canopy and that introduced a bunch of Jello. My 3dprinted frame using M2 screws and I liked the design of this but needed larger holes. https://www.thingiverse.com/thing:4864304
Topics: mobula, Canopy, thingiverse, mobula6, Mobula7, mobula6_camera_mount, R/C Vehicles, stl
4
4.0
Jan 4, 2021
01/21
by
Max Tov (fatbear666)
data
eye 4
favorite 0
comment 0
I am using this holder for flying with single 1s battery. Im using a TPU, nozzle 0.4mm and layer 0.2mm. its easy print. No suports and rafts, but you need a flex filament for this.
Topics: R/C Vehicles, stl, battery_holder, Mobula7, mobula, battery, thingiverse, 1S_LIPO
3
3.0
Jul 3, 2021
07/21
by
Jim Scheffler (eremius)
data
eye 3
favorite 0
comment 0
My Mobula 7 came without a box. So I made one. Should work for any 75mm drone that is 100mm x 100mm.
Topics: R/C Vehicles, Mobula7, Mobula_7, Storage_Box, drone, Drones, storage, thingiverse, stl
3
3.0
Jan 4, 2021
01/21
by
Achim Ziermann (GuiliFPV)
data
eye 3
favorite 0
comment 0
Hello, this is a Lipo 450mah battery clip for the Mobula6. Printed in PETG, 20% infill. PLA is not recommended, because it is not flexible enough and might break when mounting the battery with the clip. There is a cross which protects the lipo from hard landing and helps to have drone stays leveled during arming.
Topics: R/C Vehicles, stl, battery_holder, battery_clip, thingiverse, Mobula_6, Mobula6
6
6.0
Mar 18, 2021
03/21
by
Ccc Kkk (hehehaha8)
data
eye 6
favorite 0
comment 0
Happymodel Mobula7 Battery holder for 1S 600mah battery commonly used in Eachine/Syma products. Additional notes: * TPU material only * Please add support material from build platform and within the object itself
Topics: thingiverse, Lipo, LIPO_Holder, happymodel, stl, mobula, Mobula7, 1S_600mAh, R/C Vehicles
5
5.0
Apr 20, 2021
04/21
by
Fruity Cakes (Fruitycakes)
data
eye 5
favorite 0
comment 0
mod to carry charger in top box and larger bottom box. two versions of top charger box, one with a TPU door which can be glue in the inside. cut back of door half way through with sharp blade to make it easier to open and close.
Topics: thingiverse, stl, R/C Vehicles, Mobula7_Case, mobula7, mobula, Mobula7_storage_Box
3
3.0
Apr 8, 2021
04/21
by
Andrea Zega (Rimzler)
data
eye 3
favorite 0
comment 0
https://www.youtube.com/watch?v=JaEaYwcAUgc Mount made to add screw holes for the Betafpv Nano Hd camera so you can mount on other drones! Made for the Mobula 6
Topics: fpv, rimzler, nano, cinewhoop, betafpv, stl, mobula6hd, Mobula6, thingiverse, R/C Vehicles, mobula
4
4.0
Apr 1, 2021
04/21
by
(Thump2010)
data
eye 4
favorite 0
comment 0
I wanted a canopy for the new Runcam Nano 3 so I made one, I have different versions I am working on but the "half canopy" version is finished since I am posting it. My canopy and mount come in at 1.4 grams, the original Mobula 6 canopy, mount, and foam come in at 1.1 grams so I am not much heavier but you do not need a piece of foam under mine as I use the front screw Put a screw by itself in the back FC screw hole then use the front 3 FC screw hole points to mount this canopy. The...
Topics: runcam, thingiverse, R/C Vehicles, Runcam Nano 3, mobula6, Mobula_6, Nano 3, stl
4
4.0
Apr 1, 2021
04/21
by
Rodrigo Sclosa (rodrigo_sclosa)
data
eye 4
favorite 0
comment 0
I designed this new canopy for Mobula 6 to solve some problems: - It has support for copper antenna on the rear. Upgrade recommended for yours. - Support for a small 9mm buzzer. As it is very small, a buzzer is useful to locate it if it falls on the grass for example. - Antenna tube support for the RX SPI antenna upgrade. Recommended for yours too. Watch this video by Albert Kim: https://www.youtube.com/watch?v=EFedo-Zf4fw It weights only 1.3g printed on ABS.
Topics: thingiverse, Hobby, happymodel, tiny_whoop_canopy, mobula_6, Mobula6, canopy, stl, tiny_whoop
4
4.0
May 1, 2021
05/21
by
philip Jordaan (UmbraTherios)
data
eye 4
favorite 0
comment 0
This was made for the Mobula 6 drone. I am not sure if it will fit other 65mm drones. I wanted a case I could store spares, props, parts and batteries alongside my Mobula so I just designed this. Just make sure you dedicate one of the holders for just the batteries, so nothing shorts the batteries out (like tiny screws of a screw driver, for example) The bands are what hold the lid firmly onto the case, and they also act as feet for the case. the lid itself should be a "Loose-ish" of...
Topics: stl, Mobula, drone, enclosure, happymodel_mobula6, happymodel, Mobula6, thingiverse, case, R/C...
4
4.0
Mar 5, 2021
03/21
by
Ron Darling (rchelipilot)
data
eye 4
favorite 0
comment 0
This version of the battery holder for the Mobula7 quadcopter has two retaining ridges so it won't fall out of the frame and get lost or move when installing batteries. Also has a weight reducing slot on all 4 sides for added coolness. Print from TPU with 100% infill.
Topics: battery_holder, TPU, stl, Quadcopter, Vehicles, fpv, Mobula7, LIPO_Holder, battery, Lipo, mobula,...
