4
4.0
Mar 22, 2021
03/21
by
Marcin Florkiewicz (Flora_PL)
data
eye 4
favorite 0
comment 0
Compact box for Mobula7 / Trashcan Universal box base and two container versions: - Caddx - for use with Caddx EOS holder https://www.thingiverse.com/thing:3723102 - Standard - smaller space but mor universal use.
Topics: eachine_trashcan, Mobula7_Case, stl, Mobula7_storage_Box, Mobula7_Box, Mobula7, thingiverse, R/C...
4
4.0
Apr 20, 2021
04/21
by
alex storms (Imiptat)
data
eye 4
favorite 0
comment 0
This mod requires you to snip off the stock battery cradle on the frame, this box snaps into place afterwards. It was designed to hold the Tattu 3s 300mah battery but it takes everything i have for the drone, including the original 3s that comes with it. 1 small rubber band acrossed the back to hold battery in. Prints with no supports and I ran it at 90mm/s to ensure decent bridging. write up on RCGroups.com https://www.rcgroups.com/forums/showthread.php?3275667-Mobula7-hd-battery-mod
Topics: thingiverse, stl, R/C Vehicles, Mobula7, Mobula7 HD
6
6.0
Mar 8, 2021
03/21
by
(999dom999)
data
eye 6
favorite 0
comment 0
I'm running Project Mockingbird on my Mobula7 so I thought I'd create a remix with the text for the tune named Mockula7 (The version of PMB for Mobula7). More details here: https://www.facebook.com/groups/1702300099835884/ Basically PMB is the best tune (Set of betaflight settings) you can get.
Topics: Mobula7, stl, thingiverse, 3D Printing, Mobula7_Case
5
5.0
Apr 20, 2021
04/21
by
Fruity Cakes (Fruitycakes)
data
eye 5
favorite 0
comment 0
mod to carry charger in top box and larger bottom box. two versions of top charger box, one with a TPU door which can be glue in the inside. cut back of door half way through with sharp blade to make it easier to open and close.
Topics: thingiverse, stl, R/C Vehicles, Mobula7_Case, mobula7, mobula, Mobula7_storage_Box
4
4.0
Mar 22, 2021
03/21
by
Mazlan Halil (Majelan)
data
eye 4
favorite 0
comment 0
-
Topics: CineWhoop, Mobula7_HD, stl, Hobby, thingiverse, Mobula7, happymodel
4
4.0
Mar 8, 2021
03/21
by
McGregor Card (R3OVER)
data
eye 4
favorite 0
comment 0
This is a stock replacement canopy/cam mount I designed and printed. Seams to work well. I will probably be doing another version (stronger/lighter) soon. The test prints were all done in PLA, but the final one I had printed in Onix (carbon fiber embedded nylon) for strength. I would recommend printing in ABS, nylon, or even TPU if your feeling adventurous. Use your stock screws and a little strip of sticky back foam when inserting the camera to help hold the camera in place.
Topics: mobula7 camera mount, Mobula7, whoop canopy, mobula 7, stl, thingiverse, R/C Vehicles, brushless...
3
3.0
Apr 4, 2021
04/21
by
Dmitry (R2Dmitry)
data
eye 3
favorite 0
comment 0
This is Mobula7 HD Caddx Turtle spacer replacement
Topics: thingiverse, R/C Vehicles, Mobula7, Mobula7_HD, stl
3
3.0
Jun 6, 2021
06/21
by
B A (ba79)
data
eye 3
favorite 0
comment 0
So I fly my Mobula7 pretty hard and I fly with a 2s pack that mounts using an adapter that fits onto the 1s frame mount on the V1/V2 frames. However when that little 1s frame mount breaks I can no longer put on my 2s packs and either have to super glue, heat shrink or swap to a new frame. Not anymore. With this new mount on a new frame you will need to snip off the 1s battery mount or wait until it breaks then remove it. But regardless for this mount to work it cannot be there. This mount is a...
Topics: mount, Mobula7, mobula7_battery, thingiverse, stl, R/C Vehicles
4
4.0
Jan 4, 2021
01/21
by
Achim Ziermann (GuiliFPV)
data
eye 4
favorite 0
comment 0
Hi, this is my clip to mount a 3S 300mah Lipo from side to side. Some Lipos are just a tiny bit to large to fit. The clip is printed in PETG weight is below 2 gram. Infill 25% 2 wall-lines With PEtg it is flexible enough, also I use a cross at thge bottom which help that the drone stays leveled and protects the Lipo on hard landings. The clip holds the Lipo tight to the drone. I made the same for the Mobula6 for 450mah lipos.
Topics: R/C Vehicles, stl, battery_holder, Mobula7, thingiverse, Mobula7_HD
5
5.0
Mar 22, 2021
03/21
by
Istvan Fedor (Athe)
data
eye 5
favorite 0
comment 0
The original was designed for a stiffer filament so I beefed up some parts so it works in tpu. So far I'm very satisfied. It protects the wires, protects against gunk going inside, has space around the lens for an ND filter. Test flight at https://www.youtube.com/watch?v=x2AL9fFYdHg&feature=youtu.be ps use double sided tape to mount the vtx if you are concerned about it being loose inside. *Update (v2): I strengthened the original creators holeless design, added my ventillation holes and...
Topics: mobula7_hd, stl, mobula7, canopy, thingiverse, R/C Vehicles, happymodel
0
0.0
Aug 17, 2022
08/22
by
Diego Trinciarelli (vespassassina)
data
eye 0
favorite 0
comment 0
These are 4 battery holders and protections for the Mobula 7 (v2). With this it is possible to install 250-300-380 and 400-450 mah batteries, in 1s and 2s. I tested the narrow version with original 250Mah batteries, BetaFlight 300mah, GNB 380. The wide version has been tested with GNB 450mah. Printed in PLA - standing and with support. Also TPU is great if you can print it.
Topics: stl, Mobula_7, Tinywhoop, Mobula7, R/C Vehicles, happymodel_mobula7, thingiverse, Quadcopter
4
4.0
Mar 9, 2021
03/21
by
ANGEL ARIAS (moninox)
data
eye 4
favorite 0
comment 0
3x1s battery holder for Mobula v3 frame. Perfect for 1s lipos in Mobula7 HD - v2 better fit - v3 lighter version
Topics: Mobula7, stl, thingiverse, Mobula7_HD, happymodel, BetaFPV_75x, 3D Printer Parts
4
4.0
Mar 24, 2021
03/21
by
Martin Jørgensen (TTGeek)
data
eye 4
favorite 0
comment 0
The quard is such a tight fit that you dont need a lid while you can easely pull the quard out again. If you want a lid, there's a 3mm hole and a triangle to help the lid stay in place. I havent designed a lid since i dont need it, but if i change my mind i'll publish it here. If you make one, feel free to post a remake. Printed with 0.35mm layer height.
Topics: stl, Other, Mobula7, thingiverse
3
3.0
Jan 4, 2021
01/21
by
Achim Ziermann (GuiliFPV)
data
eye 3
favorite 0
comment 0
Hi, my prototype for a Mobula 7 VTX antenna Mount/Fin. Need to glues on the top, I recommend tpu 95A. My current used TPU is to soft and breaks, but with TPU95a it should have enough stability. Antenna angle to ~30-35degrees depending on exact mounting and canopy. I glued it with UV-resion onto the canopy and secured it additional with a zip tie on thru the canopy and over the front of the mount. Give it a try!
Topics: vtx_antenna_holder, R/C Vehicles, stl, Mobula7, thingiverse, Mobula7_HD
6
6.0
Mar 17, 2021
03/21
by
Longfellow Chen (fellong)
data
eye 6
favorite 0
comment 0
Edited the original frame for lighter weight and stronger boss https://www.thingiverse.com/thing:3332957
Topics: stl, Mobula7, Toys & Games, thingiverse
5
5.0
Mar 22, 2021
03/21
by
Joao Pulcherio (jhpfilho)
data
eye 5
favorite 0
comment 0
I have desinged this case to transport my Mobula7 HD. It also fits 2s und 3s batteries. My BetaFPV 75 pro 2 also fits perfect.
Topics: Mobula7_Case, Mobula7_HD, stl, betafpv, Mobula7_storage_Box, Woop, Lipo, Battery 3s, 3s lipo,...
7
7.0
Mar 17, 2021
03/21
by
Alex Enderle (Ambifox)
data
eye 7
favorite 0
comment 0
Hello everybody! I designed a storage Box for the Mobula 7. You need to Push little Magnets in all of the Parts. The Magnet dimensions are: Ø4mmx2mm you need 32 of them. If you like the design let me know=)
Topics: Magnet, R/C Vehicles, Mobula 7, box, stl, magnetic, mobula, Mobula7, thingiverse, storage, Mobula7...
6
6.0
Mar 4, 2021
03/21
by
Bruno Medeiros (brunmed)
data
eye 6
favorite 0
comment 0
Edited the original frame to better suit stock Mobula 7 hardware (https://www.thingiverse.com/thing:2962650). Created Propguards to endure harder crashes and snap into frame. Added a V3 of the propguards that endures even more crashes but also heavier.
Topics: stl, thingiverse, Mobula7, Mechanical Toys
0
0.0
Aug 13, 2022
08/22
by
Bastien Stefani (Angelbast)
data
eye 0
favorite 0
comment 0
Hello guys, props to @Polymath314 for the original design. I just made it a bit taller because the mobula 7 hdzero didn't fit in the original case. Print the case here but get the lid from original thing
Topics: hdzero_fpv, hdzero, happymodel, Mobula_7, stl, Mobula7, thingiverse, Mobula7_HD, R/C Vehicles
3
3.0
Oct 14, 2021
10/21
by
Przemysław Ce (Tommy_FPV)
data
eye 3
favorite 0
comment 0
Happymodel Mobula 7 HD conversion toothpick frame. If u don't like how Mobula7hd is flying U can print this frame. Frame fits Crazybee f4 Pro v1/2/3 AIO but there is a downside, U really need to change the motor to Larva X motors 7000kv stock motors with 2,5mm props will overheat or burnout. Frame: ABS or PLA mixed with PET-G
Topics: thingiverse, R/C Vehicles, happymodel_mobula7, stl, toothpick, Mobula7_HD, Tinywhoop, larva_x
4
4.0
May 1, 2021
05/21
by
Vijay Gulavita (SilvrZed)
data
eye 4
favorite 0
comment 0
Very simple landing gear for Mobula7 tiny whoop. It was designed to stop the battery from hitting the ground when landing and to keep the whoop level when taking off. Its a press fit onto vacant slot on the V2 frame.
Topics: stl, Mobula7, happymodel_mobula7, tiny_whoop, Quadcopter, tinywoop, Mobula 7, happymodel,...
5
5.0
Apr 20, 2021
04/21
by
Jacob Randell (jakerandell)
data
eye 5
favorite 0
comment 0
This is just the stock battery holder. Print in TPU.
Topics: thingiverse, stl, R/C Vehicles, Mobula7
7
7.0
Mar 17, 2021
03/21
by
Alex Bahvalov (mmoustache)
data
eye 7
favorite 0
comment 0
This prop guards was created to protect your home, pets, and eyes from damage. Please fly safe near people in indoor.
Topics: stl, Mobula7, R/C Vehicles, thingiverse
6
6.0
Mar 17, 2021
03/21
by
Ondrej Pistek (Zoidie)
data
eye 6
favorite 0
comment 0
Just another 1S holder. It is important to print it from Flex. I have tested 98a from Fillamentum, It works great with one perimeter and 13% infill.
Topics: stl, Mobula7, R/C Vehicles, thingiverse
6
6.0
Mar 17, 2021
03/21
by
Ben Davis (bendavis2003)
data
eye 6
favorite 0
comment 0
removed the racing skid from the original file by joshhowell for those of us that like to take off level.
Topics: stl, Mobula7, R/C Vehicles, thingiverse
3
3.0
Jun 10, 2021
06/21
by
(PROPWURX)
data
eye 3
favorite 0
comment 0
Use these stand offs when using the Trashcan frame with the Mobula7 to create The Mobster! This turns the normal Mobula7 into a total pocket rocket making it feel way bigger that a simple Whoop on steroids!. More info to follow and video upload coming soon to the channel: https://www.youtube.com/channel/UCzsB68JfYchn0PSZWuPoYpw/videos?view=0
Topics: mobula, thingiverse, Mobula7, 3D Printing, stl
4
4.0
Apr 2, 2021
04/21
by
Jay Kay (JayKayFPV)
data
eye 4
favorite 0
comment 0
A cover for your Mobula 7 charger. Attaches using the 4 original screws on the charger. Please be careful when charging at 600mah as alot of heat is produced.
Topics: Eachine, Mobula_7, charger, thingiverse, mobula 7 charger, R/C Vehicles, Mobula7_HD, Mobula7, stl
3
3.0
Jun 7, 2021
06/21
by
(K_thod_v2)
data
eye 3
favorite 0
comment 0
for a Friend...was not easy to put in place but worked perfectly at the end Mobula 7 + CaddxTurtle
Topics: R/C Vehicles, stl, Mobula7_HD, thingiverse
3
3.0
Mar 18, 2021
03/21
by
Simon Marti (marphy43)
data
eye 3
favorite 0
comment 0
Battery holder protection for HappyModel Mobula7. Fits for two bigger batteries than the small original ones (tried with 2x 450mAh). Print in TPU, sideways (shorter bridges).
Topics: thingiverse, Mobula7, R/C Vehicles, stl
4
4.0
Jan 4, 2021
01/21
by
Petr Josef Par (BassBoi)
data
eye 4
favorite 0
comment 0
Frame: Bigger holes for M3 nuts for FC. Bigger openeing for USB Canopy Bigger holes for the canopy (M3) Bigger hole for stock AIO camera (9,8mm)
Topics: Mobula7, R/C Vehicles, stl, thingiverse
3
3.0
May 1, 2021
05/21
by
Angel Pont (angelpont)
data
eye 3
favorite 0
comment 0
This is a remix of WhoopAssassin Canopy to fit a Caddx Nebula Pro camera. Printed in TPU at 0.12mm layer height. The frame is a Mobula7 v3 (75 mm frame) The screws are 12 mm M1.6 https://www.amazon.com/MroMax-Machine-Stainless-Phillips-Cabinet/dp/B07YFMTXSS/ref=sr_1_3?dchild=1&keywords=12mm+M1.6&qid=1616630197&sr=8-3 You can mount a complete Caddx Vista unit on it, or use the standoffs to mount a naked Caddx Vista. Some people use 4 mm standoffs, but these are 6 mm, because the...
Topics: stl, whoop, Nebula_pro, tiny_whoop_canopy, caddx_nebula, mobula, mobula7_camera_mount, tiny_whoop,...
6
6.0
Mar 4, 2021
03/21
by
Piotr kalisz (kalo6)
data
eye 6
favorite 0
comment 0
box for mobula7 beta75 also fits but its a tight squeeze you can just scale it up a bit (5% should do) fits your mobula7 or two mobulas on top of each other , 3 eachine 6in1 chargers , 24 lipos ( i use 450 but 550 will also fit ) the lid i recomend printing it with tpu as pla will ware off with the time iv printed both pla and tpu lids and both fit if it dose not well its down to printer tolerance let me know in the comments if it fits other drones like trashcan that charger :...
Topics: BetaFPV_75x, thingiverse, stl, Mobula7, Hobby
1
1.0
Apr 20, 2022
04/22
by
Andrew Kang (chcomilk)
data
eye 1
favorite 0
comment 0
Like a PPAP... I have Battery Holder... I habe Landing Feet... Ahha... Battry holder with Landing feet... Need disassamle canopy. ti also work with 1S battery. Happy fly.
Topics: R/C Vehicles, stl, Mobula7, thingiverse
3
3.0
Jan 7, 2021
01/21
by
Søren Nørgaard (Norgaard87)
data
eye 3
favorite 0
comment 0
After breaking the frame for my Mobula7 i needed to come up with something that was light weight and easy to assemble. This frame is assembled with 4 x M3 10mm screws, screwed in from the bottom. This design makes it very easy to swtich the propguard when you break it. Things you need. 4x M3-10mm screws 1 or 2 elastic bands for the battery Use: PLA for the frame, or other stiff material. PLA, APS or PETG for the propguard. TPU for the canopy. Might work with PLA but is untested. If you like to...
Topics: R/C Vehicles, stl, quad, happymodel, Mobula7, Eachine, 75mm, micro, thingiverse,...
4
4.0
Mar 22, 2021
03/21
by
mich kor (ugsugs)
data
eye 4
favorite 0
comment 0
Remixed to fit the Caddx turtle v2 into the canopy. I use it for Mobula7HD, as it's design was horrible and in the original the propellers hit the back of the sensor. BTW, if you replaced the sensor, make sure the coaxial cable socket is at the bottom of the sensor part (not as it is in the picture - i had to take it apart again, as obviously the screen was on a side). To put it together: 0. put screws that hold the canopy through the holes, i used the screws from Beta75x as their head is...
Topics: Mobula7_HD, stl, betafpv, beta85x_HD, canopy, beta75x, R/C Vehicles, Mobula7, thingiverse,...
3
3.0
Apr 27, 2021
04/21
by
François Guyot (iFrostizz)
data
eye 3
favorite 0
comment 0
Hey! Here is a fresh .STL file that could be very useful if you did the "XT-30" Upgrade on your tiny brushless whoop ! One part will hold the XT-30 and the other one will hold the two lipos so you can run it 2S. You should print it in TPU with 100% infill The XT-30 hold is a little tight, you can use a very thin screwdriver to put it inside and it'll never move in flight.
Topics: happymodel, Tinywhoop, thingiverse, tiny_whoop, Eachine, eachine_trashcan, Trashcan, stl, mobula,...
4
4.0
Mar 5, 2021
03/21
by
andre botha (Sakkie)
data
eye 4
favorite 0
comment 0
After seeing a lot of posts that the cables are getting caught in the props, especially the ribbon cable. I thought of this. Hope it works for you as well as it does for me. Print in TPU.
Topics: stl, Hobby, HDwhoop, Mobula7, whoop, MobulaHD, mobula, thingiverse
5
5.0
Mar 9, 2021
03/21
by
steven parsosns (sjp831)
data
eye 5
favorite 0
comment 0
This is my remix of a frame i found on here that needed some mounting holes.
Topics: drone, Mobula7, stl, thingiverse, 3D Printing, Trashcan, fpv
3
3.0
Jun 11, 2021
06/21
by
James Roberts (Bastich)
data
eye 3
favorite 0
comment 0
My new 3D printed TPU 1s battery holder for the Happy Model Mobula7 or Eachine Trashcan V3 frame. It stays in the frame so unlike the original will not fall out and get lost. There are others available but I wanted the batteries in this orientation as it keeps all the wires tidy and out from under the rear ducts.
Topics: TPU, thingiverse, Mobula7, R/C Vehicles, stl
0
0.0
Aug 14, 2022
08/22
by
Geoff Underwood (cynfewl)
data
eye 0
favorite 0
comment 0
This is a remix of the HappyModel Moblite7 canopy that I have adapted for use in an inverted Meteor65 build. In my case I have used a CrazyBeeF4 Lite flight controller from a Mobula6, but other CrazyBee variants would work as well. I have increased the height of the camera protection a bit to protect those original RunCam Nano3 lenses I have (and covet). Rotate the frame so that the USB port sits next to the angled brace (normally at the front of pre-built models) facing upwards and the battery...
Topics: Toy & Game Accessories, Mobula6, mobula7_camera_mount, mobula6_camera_mount, stl, Mobula7,...
4
4.0
Mar 8, 2021
03/21
by
Mazlan Halil (Majelan)
data
eye 4
favorite 0
comment 0
Enjoy...
Topics: R/C Vehicles, stl, thingiverse, Mobula7_HD, Trashcan
7
7.0
Mar 17, 2021
03/21
by
Nils Jae (thelili)
data
eye 7
favorite 0
comment 0
Printed it in PLA and ABS 0.2 two Batteries fits in very tight and good
Topics: gnb, fpv, happymodel, stl, mobula, Mobula7, thingiverse, Hobby
8
8.0
Apr 20, 2021
04/21
by
Nicolas DOS SANTOS (Afterhender)
data
eye 8
favorite 0
comment 0
MOBULA7 frame first attempt, lets see if it works.
Topics: thingiverse, stl, R/C Vehicles, Mobula7, frame, mobula
5
5.0
Jun 21, 2021
06/21
by
Grzegorz Russek (dr4cul4)
data
eye 5
favorite 0
comment 0
Just a simple addon to Mobula 7. No need for rubber bands. UPGRADE: Added spare wire holder.
Topics: R/C Vehicles, thingiverse, stl, Mobula7, 1S_LIPO
7
7.0
Apr 20, 2021
04/21
by
Bernie Casey (kamlooper)
data
eye 7
favorite 0
comment 0
A very simple adapter to hold 2 Nanotech 300mah 1s lipos onto the Mobula7 frame. Same style as the stock adapter except wider. Printed with TPU, lightweight, lower part 1.5mm thick, outer part 2mm thick. Tested and no battery movement, cells fit snug. Print a few to have spares. Enjoy
Topics: thingiverse, nanotech, stl, R/C Vehicles, Mobula7, 300mah
0
0.0
Aug 16, 2022
08/22
by
Florian Lohbrunner (flowomoto)
data
eye 0
favorite 0
comment 0
I remixed this part so you have one piece sitting in the frame of the mobula and a second piece working like a strap for your batteries. You may have to measure the thickness of your batteries and print different sizes untill you get that perfect fit where the battery can not fall out and is not to tight in the strap. I guess it is pretty universal like this The batteries i used are Gaoneng GNB 650mah HV lipos, i got them from amazon, gaoneng says they are 16x59x7.5mm in dimension.
Topics: stl, Tinywhoop, Mobula7, R/C Vehicles, fpv, thingiverse
4
4.0
May 1, 2021
05/21
by
Dok Peche (dokpeche)
data
eye 4
favorite 0
comment 0
You can find lens protection here : https://www.thingiverse.com/thing:4324693/files I just added an insta360 mount on an existing canopy (25°)
Topics: stl, Mobula7, toothpick, Mob7, thingiverse, 3D Printing, canopy
0
0.0
Aug 15, 2022
08/22
by
Ben (Ranger6)
data
eye 0
favorite 0
comment 0
This is a remix of Airmaxx23 model for the spiked canopy - https://www.thingiverse.com/thing:3385065 For the mobula 7 I decreased the internal width to fit the camera and also made sure the screws for securing the camera had enough depth to grip the camera. Also added a cutout in the top for the antenna to pop out.
Topics: Ender_3, stl, Mobula7, thingiverse, R/C Vehicles
4
4.0
Mar 18, 2021
03/21
by
Kevin Cross (Davross)
data
eye 4
favorite 0
comment 0
Remixed Dave_C's fantastic original to go with Mobula 7 guts. Took some material out of the frame (reduced thickness), and integrated a TPU battery holder & slot for the usual 2 x 1S packs. Paired this up with the 30 degree Sailfly canopy (https://www.thingiverse.com/thing:3648399)
Topics: R/C Vehicles, thingiverse, Mobula7, toothpick_frame, stl
6
6.0
Mar 17, 2021
03/21
by
Jesper Juul (Projekthulen)
data
eye 6
favorite 0
comment 0
These holders are designed for [GN3 550mAh batteries](https://www.banggood.com/5Pcs-Gaoneng-3_8V-550mAh-50C100C-Lipo-Battery-PH2_0-Plug-For-Tiny-RC-Helicopter-Drone-p-1348860.html?cur_warehouse=CN) to fit snugly on the Mobula7. They fit the various Mobula7 frames on Thingiverse. I can highly recommend these larger batteries over the standard that comes with the small indoor flyers. I get 5+ minutes of flighttime.
Topics: stl, Mobula7, thingiverse, battery_holder, R/C Vehicles
